Bafx Products – Triple Zone Ir Repeater / Remote Control Extender Kit (bafx triple ir kit) 2527

Review for triple zone ir repeater remote

Price was $49.99. Perfect quality product that does hat it says and does it well. . I installed this to repeat ir in an new in-cabinet a/v installation with the tv on top. The equipment ist inside on a full extension shelf. The sensor cable is long enough to go to the tv on top/front, through a hole in the cabinet back, and to the repeater on the back of the shelf even at full extension. The repeater cables are about 6' long. . The couch in the rectangular room is about 14' back from the tv and the sensor attached to it. I bought a 2nd sensor (which this will accomodate) figuring i'd need it to go to the kitchen about 30' back. I ran repeater wire for it in the wall. Well i'm happy to say the single sensor will work all the way from the kitchen! so i have an extra sensor. For what? well it was a pleasant surprise. So i'd suggest unless you've got to work around some obstacles that would block the ir (and couldn't say put the sensor maybe on top or side etc). . The emitters are dual output. This may seem fine - and often it is - and you can zip more of a split if you want. To me i'd rather had 6 to 8 single emitters rather than any dual. The reason is now whatever two pieces of equipment are bonded together by the leads. Kind of ok once you're set - but still can be a pita. . Pros:. - works. Just works. - sensor range 30-35' in my room - with led and incandescent light and nothing overtly blocking the path. - plenty of inputs and outputs. - mountable (i'm using industrial velcro to the back top of the equipment pull out shelf. . Cons:. - personal preference or single emitters although with hdmi control i ended up using a "double" for the couple of devices and left the 2nd emitter angle.

-Q. Anonymous

– triple zone ir repeater / remote control extender *important* most customers will want the single zone kit. this triple zone kit is only recommended for advanced users. if you are unsure of which kit to purchase, please contact bafx -bafx products – triple zone ir repeater / remote control extender kit

  • Additional: Important – Our Triple Zone Repeater Kit Is Not Compatible With The Following Devices: Marantz, Rng150, Rng150n & Rng250. If You Have One Of These Devices, You Will Need Our Single Zone Kit For That Device. This Kit Is Compatible With All Other Devices, Including But Not Limited To: Onkyo, Yamaha, Sony, Verizon, Uverse, Denon, At&t, Cox, Dish Network, Hopper, Logitech, Harmony & More!.
  • Additional: Warranty & Support – Bafx Products Offers A 1 Year Warranty Against Manufacturing Defects With A Simple & Super Easy Claims Process. Not To Mention Our Friendly And Knowledgeable Usa Based Support Who Are Ready To Help Answer Your Questions And Assist In Getting You Setup!.

Bestseller Bafx Products – Triple Zone Ir Repeater / Remote Control Extender Kit (Remote Control) Bafx Triple Ir Kit

Buy Now


Introduction

We have used this in many a/v installations for clients. It always works and comes with plenty of blasters. If you have components in a closet or cabinet and use an ir remote control, you can't go wrong with this unit. . You need to have the remote senor in an open area with line of site to your remote control and may need to splice extra 3-conductor cable (any cat cable will do), so it's a good idea to know how far away from the receiver you will be placing the hub and deciding if you are up to the task of splicing cable. If not, try to order a compatible ir receiver with a longer cord. The Best triple zone ir repeater remote ( Nov 2019 ) | Bafx Products-Remote Control Review Additional BAFX Products - Triple Zone IR Repeater / Remote Control Extender Kit Triple zone - our triple zone or multi zone kit allows for the independent control of identical devices on one kit. in essence with the triple zone kit you are getting 3 single zone ir repeater kits built into 1 kit so there is less to install and less cluttering up your home. this kit is recommended only for more advanced users. if unsure of which kit to purchase, please feel free to contact bafx products for help!. Important - our triple zone repeater kit is not compatible with the following devices: marantz, rng150, rng150n & rng250. if you have one of these devices, you will need our single zone kit for that device. this kit is compatible with all other devices, including but not limited to: onkyo, yamaha, sony, verizon, uverse, denon, at&t, cox, dish network, hopper, logitech, harmony & more!. Warranty & support - bafx products offers a 1 year warranty against manufacturing defects with a simple & super easy claims process. not to mention our friendly and knowledgeable usa based support who are ready to help answer your questions and assist in getting you setup!. Control - with this kit you can control up to 2 devices per zone with the included parts (1 dueal head emitter cable per zone and one ir receiver per zone). each zone may be expanded to control up to 4 devices with the purchase of additional emitter cables.. Compact - a smaller footprint than many other kits on the market allows the main block to placed just about anywhere along with a new and smaller ir receiver for a more discreet look. with the addition of mounting tabs on either side it can even be affixed to a wall, cabinet or ceiling! .

Bafx Products - Triple Zone Ir Repeater / Remote Control Extender Kit Review (bafx triple ir kit)

I just hooked it up so i don't know how long it will last but it worked great right out of the box. It was easy to install once the wires were run behind the equipment. That's a headache no matter what. It sure solved a problem that we were having with our cable box, for some reason the cable box received it's ir commands at a very small window or angle. You basically had to be one spot in the room for the remote to work. Not any more. The remote works everywhere with this repeater. I wish i had purchased it long ago. In the future i plan on installing it in an entertainment center so i also purchased the other available receiver. It worked great too. . Have has it a while and came up with one easily fixed problem. The emitter fell off the dvr/cable box. I ended up cleaning the dvr's ir receiver with rubbing alcohol and reattached the same emitter. That did it so clean the surface before you attach the emitter. -B. Fabian

Bafx Products Repeater Control Extender

  • Order: Electronics
  • Brand: BAFX Products
  • Color: Black
  • EAN: 0815523020110
  • Product Dimensions:
    Height:5.00 inches
    Length:6.00 inches
    Weight:0.90 pounds
    Width:6.00 inches
  • Manufacturer: BAFX Products
  • Model: BAFX-TRIPLE-IR-KIT
  • MPN: BAFX-TRIPLE-IR-KIT
  • Total: 1
  • Quantity: 1
  • Part/Serial Number: BAFX-TRIPLE-IR-KIT
  • Sub-Type: CE
  • Category: REMOTE CONTROL
  • Size: Triple Zone (Advanced)
  • UPC: 815523020110

- triple zone ir repeater / remote control extender Ce, *important* most customers will want the single zone kit. this triple zone kit is only recommended for advanced users. if you are unsure of which kit to purchase, please contact bafx for assistance. the bafx products triple zone ir repeater & remote control extender kit is, essentially, 3 ir repeater kits in 1! it allows you to control 3 separate but identical devices independently of each other, from different rooms, while only purchasing and installing 1 repeater kit rather than 3 repeater kits. similar "zoned" ir repeater kits can easily run $200-300+ or more! we now offer an affordable option to everybody! look no further for your zoned repeater kit needs! most people will want our standard, single zone, kit however, for more advanced users the triple zone kit may be a better solution. specs: 3 independent zones 3 dual head emitters cables (one for each zone) 3 ir receivers (one for each zone) 1x user manual 1x power adapter link to instructional setup video ir receiving distance of 25 feet distribution block can be powered by usb cable (not included) 1 year warranty Bafx Products - Triple Zone Ir Repeater / Remote Control Extender Kit (BAFX-TRIPLE-IR-KIT-Bafx Products).

Bafx Products Repeater Control Extender Ce

PROS
  • Works very well. I bought it to replace a poorly-installed wired remote ir repeater. Worked extremely well with a 50' stereo audio extension cable. Unfortunately the pull wire broke while fishing the extension through the wall so i had to buy a wireless ir repeater in addition.
  • Took a little bit of time to dial in, so have some patience. But i highly recommend using masking/painters tape between on the ir repeater and receiver if you are having trouble with a specific device (mine was the cable box). Also keep in mind the receiver can have problems with plasma tv's, but by moving it around i was able to find a place that allows me to have the sensor to where i can still point the remote at the tv, but not encounter interference. Overall great product for the price, was able to extend the ir receiver with standard cables and stow away all of my media center components in a closet allowing for a very clean look.
CONS
  • We received the shipment very quickly, which was great! the instructions are pretty simple, however the "receive" that receives the signal from the remote control apparently doesn't go with the rest of the equipment in the box. The instructions show a receiver with a sensor at the end of the wire, but the part that came in the box has 3 sensors with one at the end and two more built in line along the wire. The plug connector that is on this receiver is too small for the opening on the box where you're supposed to plug it in and won't work. Everything else appears to be the right parts. The biggest disappointment is that there is no phone number to call customer support, only an email address. You can also go online and send them a message. After sending an email to them, and filling out their online form, hours have passed with no response. It's a pretty simple system in theory, but frustrating to make the time to install it only to discover that they have either chanced the receiver without changing the size of the plug in on the box. Or sent the wrong part!
  • Works well with tv however. Lining up my dvd player to work on a remote has been impossible to do. I must have tried 20 times and as soon as i released the wire on the dvd player it would not work on it. Very frustrating when i want to see a movie. Unable to pause, ff. Etc. Have to manually turn it on from my closet to watch in my bedroom and then get up if i need to adjust movie. Hopefully we will get it one day but for now we just deal with it. Works great on my samsung smart tv which was primary reason we got this after buying a king bed and leaving no room for components to be in our way. So it was a great idea and reduced clutter and opened our walkway to our bed on one side which was a great. I bought based on reviews and hopefully i can get the wire perfect to my dvd player and update the review. But for now. Its better than average but is not doing everything it is supposed to
  • It worked only for a couple months.

triple zone ir repeater remote BAFX Products - Triple Zone IR Repeater / Remote Control Extender Kit (Switch to Mobile/Desktop Version)

This product is a life saver. My tv ir sensor is completely blocked from view of the remote so you must move around the room to use the remote. This extender has reliably added the ability to extend the reach to the tv ir from any lotion. The sensor that it provides functions well and is unobtrusive to the eye. The only issue i had with this design was a very snug socket on the distribution block where the ir sensor connects. I was not able to get any connection, at first. But the package includes a small card from the manufacturer listing an email addresses to which i could inquire. To my surprise, i had a most professional and clear response to my inquiry in one business day! their response pointed out that they often find the mini plug sockets to be stiff and that often a little firm force must be used when inserting the ir feed. Once i had followed their suggested steps, i was pleased to see the functionality of this well made product.

Bafx Products - Triple Zone Ir Repeater / Remote Control Extender Kit
Click to see NoticeBafx Products - Triple Zone Ir Repeater / Remote Control Extender Kit (bafx triple ir kit)"Remote repeater was a success. First it seems a bit confusing, but once you have managed to set 1 of the sensors up, the rest are a breeze. I had a client that needed to save up some space in his studio so that the lights of all his accessories wouldn't bother when watching a movie, so everything was stored and connected to the ir repeater to make sure ir was accesible. It was a great fit."

(0) Question: Does this not work with all marantz devices? i have a nr1403 receiver, and just want to make sure.


(1) Question: I currently require two remotes to control all my audio/tv equipment. i cannot get them all onto one master remote. do i need two systems?


(2) Question: I have an onkyo receiver with a broken infrared sensor. could i hook this up to the 3. 5mm ir jack on rear of the onkyo instead of included emitter?



Featured Categories » Gold Merchants » Specialty Boutique » Bafx Products - Triple Zone Ir Repeater / Remote Control Extender Kit (Remote Control) Bafx Triple Ir Kit


Sewell Direct SW-29727-25 25-Feet IR Infrared Extension Cable

The sewell ir extension cable provides the perfect solution for extending your ir signal and any other stereo cables. Our advanced design ensures maximum signal transfer and minimizes interference. The high quality stress relief design of the sewell ir extension cable allows optimal flexibility without damaging the cable.

Sewell Direct SW-29727-25 25-Feet IR Infrared Extension CableSewell-Direct-SW-29727-25-Infrared-Extension

SEWELL DIRECT SW-29727-25 25-FEET IR INFRARED EXTENSION CABLE Benefits
Brand :    sewell direct
Size :    25 ft
  • Jacket material: pvc
  • Conductor: bare copper
  • Connector type: 3. 5mm stereo male / 3. 5mm stereo female
  • Length: 25 ft.
  • Connectors: gold-plated
Price :    $6.84 (was $10.95)
Model :    SW-29727-25
Quantity :    1
Order click here :    normally ships in 24 hours
Speakers :    Best Remote Control (sewell direct product review) for Sewell Direct SW-29727-25 25-Feet IR Infrared Extension Cable available ( Nov 2019 )

Xantech 784-00 Emitter IR Sensor Extension Cable, 50'

A 50 foot male to female cable for extending ir emitters and ir sensors. This three-conductor cable has 1/8" male and female plugs molded onto a high quality cable.

Xantech 784-00 Emitter IR Sensor Extension Cable, 50'Xantech-784-00-Emitter-Sensor-Extension

XANTECH 784-00 EMITTER IR SENSOR EXTENSION CABLE, 50' Overview
Brand :    xantech
Size :    50 Feet
Weight :    1.00 pounds
  • 50 feet of high quality cable
  • 1/8" male and female fittings molded onto the cable
  • Use for ir sensors or ir emitters
Price :    $27.95
Model :    784-00
Quantity :    1
Order click here :    normally ships in 1-2 business days
Home Improvement :    Best Home Lighting Accessory (xantech product review) for Xantech 784-00 Emitter IR Sensor Extension Cable, 50' available ( Nov 2019 )

DuaFire IR Repeater, Infrared Remote Control Extender IR Kit Blaster System Cable Box TV Home Entertainment Theater

1. High-end service: we provide 18-month warry-free guarantee, anything or anytime, contact us, you will get your problem solved, we always provide you the most satisfactory solution 2. Control up to 8 home theater devices kept behind closet, doors or in a closed cabinet with ir infrared remote control extender repeater system 3. It is advised to distance the it receiver from any plasma tv or display ability to control multiple appliances at various locations up to 10 m 4. Connect ir receiver to any of the 3. 5 mm ports on the ir transceiver, if 2 or more ir receiver are connected, the distance between 2 ir receiver should not be less than 6 m to avoid interference 5. Cfl friendly: this unit can be installed in an area with compact fluorescent lighting and work in the most lighting environments 6. Remote indication lights on ir receiver: green being power connected while flashing red indicates the signal is being sent specifications: 1. Small and solid design: 4. 29 x 2. 17 x 0. 98 inch 2. Cable length: power plug - 2. 6 feet, receiver - 5 feet, emitter - 10 feet 3. Receiving distance: 26 feet 4. Low power consumption: 12v dc, 30 ma max 5. Input voltage:110-220v 6. Receiving frequency range: 34 khz to 60 khz 7. Emitting frequency range: 38 khz to 56 khz 8. Emitting distance: 100-200mm 9. Interface: 3. 5mm type the kit includes: 1 x distribution block 1 x ir receiver 1 x power plug 4 x dual ir emitters 1 x manual

DuaFire IR Repeater, Infrared Remote Control Extender IR Kit Blaster System Cable Box TV Home Entertainment TheaterDuaFire-Repeater-Infrared-Extender-Entertainment

DUAFIRE IR REPEATER, INFRARED REMOTE CONTROL EXTENDER IR KIT BLASTER SYSTEM CABLE BOX TV HOME ENTERTAINMENT THEATER Benefits
Brand :    duafire
Color :    IR Repeater Kit
Weight :    0.79 pounds
  • Must-have for home theater - the ir blaster is the accessory for home theater, easy to use; it sets up in minutes and requires no drilling or rewiring. you can ask your friend to come and enjoy your own movie time
  • Versatile use - ir repeater allows you to control a/v equipment with your existing ir remote controller, such as: amplifier, cable box, stereo receiver, satellite tv receiver, cd player, dvd player, blu-ray player, etc
  • Broadband remote control - compatible with most electronics appliances with its wide frequency range, amplifies the ir signal of your appliances, controls up to 8 devices - expandable to 12 devices (additional ir emitters sold separately)
  • No more mess - compact and mini design won't take too much space, and you can put all your appliances behind the door or in a tv console. it will save a lot space and make your living room or bedroom neater
  • High sensitivity - real time transmission without any delay with its high sensitivity sensor, changing the channel as you want
Price :    $21.99 (was $49.99)
Model :    10008845-IP
Quantity :    1
Order click here :    normally ships in 24 hours
Wireless :    Best Wireless Accessory (duafire product review) for DuaFire IR Repeater, Infrared Remote Control Extender IR Kit Blaster System Cable Box TV Home Entertainment Theater available ( Nov 2019 )

BAFX Products - 25 Feet - Shielded - Headphone Stereo Audio Extension - 3.5mm Jack - M/F Male to Female - Nickel Plated

This bafx products - 25 foot headphone extension cable is guaranteed to work to extend the length of your bafx products ir repeater kit receivers & emitters! headphone extension cable quality can vary widely from company to company, because of this the extension cables sold by some companies are of such low quality that they cannot transmit the signal of our ir repeater kits, leaving you frustrated and the install of your ir repeater system, stalled. For this reason we now offer our own headphone extension cables for sale to use with our kits, we guarantee the quality of these cables to work 100% with our kits in extending both the receivers & the emitters! our extension cable can also be used for regular headphones as well or any other similar devices. It may also be used with smart phones, tablets, computers, cd players, speakers, tuners and other audio devices! these cables may also of course be connected together to make longer cables! some specifics about our cable: 25 foot length shielded to prevent signal interference from other electronic devices 3. 5mm jacks male to female ends nickel plated jacks to prevent corrosion guaranteed to work with the bafx products ir repeater kits each cable tested on one of our repeater kits before being sent! 10 year warranty against manufacturing defects* 10 year warranty from bafx products against manufacturing defects only valid when purchased from bafx products or an authorized dealer. Must have original order number or receipt as proof of purchase to claim warranty.

BAFX Products - 25 Feet - Shielded - Headphone Stereo Audio Extension - 3.5mm Jack - M/F Male to Female - Nickel PlatedBAFX-Products-Shielded-Headphone-Extension

BAFX PRODUCTS - 25 FEET - SHIELDED - HEADPHONE STEREO AUDIO EXTENSION - 3.5MM JACK - M/F MALE TO FEMALE - NICKEL PLATED Review
Brand :    bafx products
Color :    Black
Size :    25 Feet
Weight :    1.00 pounds
Model :    4330154751
Quantity :    1
Order click here :    normally ships in 24 hours
  • Guaranteed to work with the bafx products ir repeater kit
  • 25 feet long - can connect multiple cords to extend even further
  • Use to extend both receivers & emitters on the bafx products ir repeater kit
  • Can also be used for regular headphones and other audio accessories
  • 10 year warranty against defects from bafx products *
Price :    $6.62
Speakers :    Best Headphones (Speakers product review) for BAFX Products - 25 Feet - Shielded - Headphone Stereo Audio Extension - 3.5mm Jack - M/F Male to Female - Nickel Plated available ( Nov 2019 )

Sewell Direct SW-29727-50 50-Feet IR Infrared Extension Cable

The sewell ir extension cable provides the perfect solution for extending your ir signal and any other stereo cables. Our advanced design ensures maximum signal transfer and minimizes interference. The high quality stress relief design of the sewell ir extension cable allows optimal flexibility without damaging the cable.

Sewell Direct SW-29727-50 50-Feet IR Infrared Extension CableSewell-Direct-SW-29727-50-Infrared-Extension

SEWELL DIRECT SW-29727-50 50-FEET IR INFRARED EXTENSION CABLE Spotlight
Brand :    sewell direct
Size :    50 ft
Model :    SW-29727-50
Quantity :    1
Order click here :    normally ships in 24 hours
Speakers :    Best Remote Control (sewell direct product review) for Sewell Direct SW-29727-50 50-Feet IR Infrared Extension Cable available ( Nov 2019 )
Price :    $10.29 (was $13.95)
  • Connector type: 3. 5mm stereo male / 3. 5mm stereo female
  • Conductor: bare copper
  • Jacket material: pvc
  • Connectors: gold-plated
  • Length: 50 ft.

BlueRigger In-Wall High Speed HDMI Cable - 50 Feet 15 M - CL3 Rated - Supports 4K 30Hz, Ultra HD, 3D, 1080p, Ethernet Audio Return Latest Standard

Bluerigger(tm) high speed hdmi cables are premium quality cables for your gaming or home theater setup. Compatible with latest hdtv technologies bluerigger cables are fully certified to support the latest & advanced hdmi features. Backwards compatible with previous hdmi standards the cable is backwards compatible with all previous hdmi standards, so you'll be able to use this cable with all your hdmi devices. When you connect two devices with different hdmi standards, they will automatically find the best available connection. Quality picture and sound - 26awg - cl3 rated for in-wall installations - supports 3d, ethernet and audio return - supports 1080p, 1080i, 720p, 480p, and 480i resolutions - works with all hdtvs, blu-ray players, xbox 360, ps3 and other hdmi devices - hdcp compliant - full metal jacket connector provides strength, durability and prevents interference as compared to other cables - supports true hd dolby 7. 1 and dts-hd master audio warranty all bluerigger hdmi cables are backed by a 1 year warranty. Please contact us via email if you have any questions.

BlueRigger In-Wall High Speed HDMI Cable - 50 Feet 15 M - CL3 Rated - Supports 4K 30Hz, Ultra HD, 3D, 1080p, Ethernet Audio Return Latest StandardBlueRigger-Wall-High-Speed-Cable

BLUERIGGER IN-WALL HIGH SPEED HDMI CABLE - 50 FEET 15 M - CL3 RATED - SUPPORTS 4K 30HZ, ULTRA HD, 3D, 1080P, ETHERNET AUDIO RETURN LATEST STANDARD Features
Brand :    bluerigger
Size :    50 Feet
Weight :    2.20 pounds
  • Supports latest hdmi 2. 0b standard - 4k, uhd, 3d, audio return channel (arc), category 2 certified, 18 gbps / 600 mhz refresh rate, 2160p, 1080p, 48 bit deep color, ethernet and is backwards compatible with earlier versions
  • Compatible with all hdmi components - connect blu-ray player, apple tv, xbox one, ps4, roku, and laptops with hdmi output to 4k uhd tv, projectors, a/v receiver, etc.
  • Reliable construction - durable, high-quality build protects against corrosion while maximizing signal strength - 100% pure copper conductors, triple cable shielding, 24k gold-plated full metal jacket connectors
  • In-wall series - fire-resistant pvc jacket, and availablility in lengths of 15ft, 25ft, 35ft & 50ft make the bluerigger cl3 rated cable ideal for in-wall installation
  • Bluerigger cables are backed by a limited lifetime warranty and us-based customer support
Price :    $25.99 (was $69.99)
Model :    BL-CL3-50FT
Quantity :    1
Order click here :    normally ships in 24 hours
Ce :    Best Cable Or Adapter (bluerigger product review) for BlueRigger In-Wall High Speed HDMI Cable - 50 Feet 15 M - CL3 Rated - Supports 4K 30Hz, Ultra HD, 3D, 1080p, Ethernet Audio Return Latest Standard available ( Nov 2019 )

DONGJIAN Infrared Remote Two Zone IR Repeater Kit to Control Up to 8 Devices Hidden IR System Infrared Remote Control Extender Kit

Hidden ir repeater system: the hidden ir repeater system allows you to use an existing infrared (ir) remote control to operate up to 6 audio/video (a/v) components if your home theater components are hidden behind closed doors or walls in an entertainment cabinet or equipment closet the hidden ir repeater system is the accessory you need to be able to control your components with your remote specifications: 1. Small and solid design 2. Low power consumption  3. 12v, dc, 30 ma max  4. Input voltage:110-220v  5. Receiving frequency range: 34 khz to 60 khz 6. Emitting frequency range: 38 khz to 56 khz  7. Receiving distance: 5 meter  8. Emitting distance: 100-200mm  9. Cord length: ir emitter: 10ft(3m) , ir receiver: 5ft(1. 5m)  how to install 1. Tape the emitters on the devices like cable boxes, xbox one, roku, apple tv, nvidia shield and so on, please tape on the nearby of infrared receiving point. 2. Fix the receiver on the most convennient place by remote control. 3. Plug the emitters & receiver in the infrared remote repeater, connect to power supplies, then you could use it.

DONGJIAN Infrared Remote Two Zone IR Repeater Kit to Control Up to 8 Devices Hidden IR System Infrared Remote Control Extender KitDONGJIAN-Infrared-Repeater-Control-Extender

DONGJIAN INFRARED REMOTE TWO ZONE IR REPEATER KIT TO CONTROL UP TO 8 DEVICES HIDDEN IR SYSTEM INFRARED REMOTE CONTROL EXTENDER KIT Summary
Brand :    dongjian
  • High sensitivity: real time transmission without any delay with its high sensitivity sensor
  • Kit controls up to 8 devices - expandable to 12 devices(additional ir emitters sold separately)
  • Kit includes: 1-distribution unit; 2-ir receiver; 4-dual ir emitters for 8 a/v devices; 1-12v dc power plug and 1-user manual. one year warranty
  • Control your ir remote controlled devices that are hidden behind doors or in other rooms
  • Tested to work with amplifier, cable box, stereo receiver, game console, satellite tv receiver, cd player, dvd player, blu-ray player and other streamers as well as most a/v devices
Price :    $24.99 (was $59.99)
Quantity :    1
Order click here :    normally ships in 24 hours
Network Media Player :    Best Accessory Or Part Or Supply (dongjian product review) for DONGJIAN Infrared Remote Two Zone IR Repeater Kit to Control Up to 8 Devices Hidden IR System Infrared Remote Control Extender Kit available ( Nov 2019 )

BAFX Products - Peephole IR Receiver BAFX Products IR Repeater Kit Peephole

This hidden peephole ir receiver is meant to be used to create a more clean install of of the bafx products ir repeater kit. Rather than sticking the ir receiver to the face of your tv, this receiver is meant to be installed directly into a cabinet door or the like creating a more overall integrated look/feeling. The installation of this style ir receiver will require the drilling of a 1/2" hole into the surface to which it will be mounted. You will also need a 5/8" wrench to tighten the securing nut. Finger tightening the nut may suffice though we recommend tightening with a wrench. As with all bafx products items, it comes with a 1 year manufacturer warranty against defects*specs: requires drilling of 1/2" hole comes with needed nut and washers for securing to wall length of receiver: 2" length tip to tip: 61. 75" length of cable: 58. 5" face diameter: 5/8" compatible with bafx products ir repeater kits cannot guarantee compatibility with other brands of ir repeaters 1 year warranty against manufacturing defects*1 year warranty valid from original date of purchase. Requires valid order number or proof of purchase. Only valid when purchased from bafx products or authorized dealers. Bafx products is a registered trademark of bafx products llc - upc 815523020127

BAFX Products - Peephole IR Receiver BAFX Products IR Repeater Kit PeepholeBAFX-Products-Peephole-Receiver-Repeater

BAFX PRODUCTS - PEEPHOLE IR RECEIVER BAFX PRODUCTS IR REPEATER KIT PEEPHOLE Benefits
Brand :    bafx products
Size :    Peephole
Model :    BAFX0127
Quantity :    1
Order click here :    normally ships in 24 hours
  • Ir repeater kit sold seperately! not designed to be plugged directly into cable boxes or other devices, must be used with bafx products ir repeater kits (sold seperately)
  • For use with the bafx products ir repeater kit - cannot guarantee compatibility with other brands!
  • Requires drilling of 1/2" hole into install & 5/8" wrench to tighten nut - comes with mounting nut, washer and instructions.
  • Complete with bafx products 1 year - no hassle warranty against manufacturing defects*
  • Peephole style ir receiver can be installed in cabinet doors, ledges or other flat surfaced areas for a more clean and discreet look!
Price :    $19.99
Biss :    Best Remote Control (bafx products product review) for BAFX Products - Peephole IR Receiver BAFX Products IR Repeater Kit Peephole available ( Nov 2019 )

BAFX Products - CAT5 Adapter Kit BAFX Products IR Repeater Kit - 1 Year Warranty

Purchased to run from receiver cabinet to smart tv. Worked as expected.

Do you have the bafx products ir repeater kit and want to extend the length of the ir receiver or emitters using the existing cat5 connections in your home? sure, you can splice the ir receiver or emitters into cat5 cable but that can be problematic. If the splices are not done perfectly it can skew the ir signal and you have to do it all over again! purchasing this cat5 ir repeater adapter kit will allow you to simply connect a few components together and plug it into your existing cat5 jacks and your good to go! see our images for how it works! this kit includes: (2x) 3ft cat5 cables (2x) 10" cat5 to 3. 5mm adapters (1x) 3. 5mm male ot male adapter (1x) instructions can be used to extend either ir receiver or emitters! 1 year manufacturer warranty from bafx productswe can only guarantee that this adapter kit will work with the bafx products ir repeater kit and it's components. Not all repeater kits are made equal and we cannot, in any way, promise this adapter kit will work with other brands of repeater kits or their components! please also note that the cat5 line you run the ir signal over must not be used for any other application such as an internet connection. This must be used with a dedicated cat5 line.

BAFX Products - CAT5 Adapter Kit BAFX Products IR Repeater Kit - 1 Year WarrantyBAFX-Products-Adapter-Repeater-Warranty

Bafx Products Adapter Repeater Warranty (bafx0004) FAQ.

Works really well. My installer had originally crimped 2 ir emitters to a 45 ft cat6 cable from my tv to my network closet. When i rearranged some of my equipment, the existing cable was not long enough and instead of extending the existing cable (not very clean looking) i got this product and mad a patch cord for the exact length i needed. The cabling now looks neat and it functions flawlessly. I was impressed and got 2 more the replace other ghetto cables. Longest distance i've used this is 45 ft patch panel to patch panel. Definitely recommend. -Notice from X. Yvette, Leicestershire

Click to Show bafx products adapter repeater warranty (bafx0004) Details

I used this kit on an existing cat6 run and it worked perfectly with no issues. The run is probably about 75ft and there's no delay or anything. I'm very happy with this product.

Bafx-products-adapter-repeater-warranty-(bafx0004) set picture

- E. AngelicaI used this to run my cable box 50' from my tv and use an ir blaster. This was a great way to run for such a distance.

Works great. I have even used them a few times as audio extensions, just don't use the included gender changer with audio as it appears to be stereo to mono.

Y. Palmer, Centre

BAFX PRODUCTS - CAT5 ADAPTER KIT BAFX PRODUCTS IR REPEATER KIT - 1 YEAR WARRANTY Feature
Brand :    bafx products
Model :    BAFX0004
Quantity :    1
Order click here :    normally ships in 24 hours
Speakers :    Best Remote Control (bafx products product review) for BAFX Products - CAT5 Adapter Kit BAFX Products IR Repeater Kit - 1 Year Warranty available ( Nov 2019 )
Price :    $10.99
  • Dedicated - the cat5 line you run your repeater kit over must be solely dedicated to the use of the ir repeater kit. the line should be a direct run and should not be run through any switches or it may not work proeprly.
  • Extend - extend your bafx products ir repeater kits over a cat5 line with no splicing needed! splicing cna be tricky and using our kit will save you a huge headache!
  • Compatibility - our cat5 adapter kit will work with all bafx products brand ir repeater kits. we cannot promise compatibility for any other repeater kits or uses
  • Warranty - the bafx products cat5 adapter kit comes with a 1 year manufacturing warranty against defects. bafx products customer support is top notch and easy to deal with, so please contact them with any questions you may have!

Sewell Direct SW-29727-10 12-Feet IR Infrared Extension Cable

The sewell ir extension cable provides the perfect solution for extending your ir signal and any other stereo cables. Our advanced design ensures maximum signal transfer and minimizes interference. The high quality stress relief design of the sewell ir extension cable allows optimal flexibility without damaging the cable.

Sewell Direct SW-29727-10 12-Feet IR Infrared Extension CableSewell-Direct-SW-29727-10-Infrared-Extension

SEWELL DIRECT SW-29727-10 12-FEET IR INFRARED EXTENSION CABLE Advantages
Price :    $3.85 (was $8.35)
  • Length: 12 ft.
  • Connector type: 3. 5mm stereo male / 3. 5mm stereo female
  • Jacket material: pvc
  • Conductor: bare copper
  • Connectors: gold-plated
Brand :    sewell direct
Size :    12 ft
Weight :    0.25 pounds
Model :    SW-29727-10
Quantity :    1
Order click here :    normally ships in 24 hours
Speakers :    Best Remote Control (sewell direct product review) for Sewell Direct SW-29727-10 12-Feet IR Infrared Extension Cable available ( Nov 2019 )

BAFX Products - Wireless IR Repeater Kit / Remote Control Extender

The *all new* bafx products wireless ir repeater kit / remote control extender! complete your a/v setup with ease! this handy little kit allows you to hide all your ir controlled a/v equipment behind closed doors, or in another room all together, while still being able to control them with your current ir remote controls! (does not support rf only remote controls, such as some roku players)rather than sending the ir signal via cables & wires like our standard ir repeater kits, these kits repeat your ir commands wirelessly! with our brand new wireless kit, there is no need to run a wire from the ir receiver end of your setup to where the devices are located. Simply plug the ir receiver end in the room where you want to control your devices from and plug the emitter end into an outlet near the devices you are trying to control and then attach one emitter head to each device! simple as that! no more messy wires to run through walls or floors! important:more than one wireless kit may be used per home however, if you have two devices that both can be controlled with the same remote control, please be aware that if they are both connected to the repeater kit, they will both respond to the commands coming from the repeater kit! comes with a fenominal and easy to use 1 year warranty against manufacturing defects from bafx products specs: transmitting distance 50-300ft (walls/floors will reduce distance) generally suitable for homes 3-5, 000sqft or less depending on home construction distance of ir receiver from remote control, up to 25' 5v powerwhat's included: 2x ir receiver 1x quad head emitter cable 2x power wall adapter 1x transmitter block 1x receiver block link to setup video manual 1 year manufacturer warranty against defects(please note, this ir repeater kit will only send remote control ir signals, you will still need to run a line for you actual a/v signals)

BAFX Products - Wireless IR Repeater Kit / Remote Control ExtenderBAFX-Products-Wireless-Repeater-Extender

BAFX PRODUCTS - WIRELESS IR REPEATER KIT / REMOTE CONTROL EXTENDER Featured
Brand :    bafx products
  • Simple to follow setup video, helpful technical support and an awesome, 1 year manufacturer warranty from bafx products!
  • Sit and change channels on the cable box while the box is in the basement and your upstairs.
  • Generally suitable for most homes 3-5, 000 sqft or less. our wireless ir extender can span 50-300ft, depending on your homes contstruction which can reduce the distance it may span.
  • Hide your ir remote controlled devices completely out of sight! in another room, in the cabinet or wherever you can imagine!
  • Does your remote control stop working if your cable box is 20' away but you want to put the cable box downstairs? not a problem with our wireless remote control extender!
Price :    $39.99
Model :    BAFX0950
Quantity :    1
Order click here :    normally ships in 24 hours
Speakers :    Best Remote Control (bafx products product review) for BAFX Products - Wireless IR Repeater Kit / Remote Control Extender available ( Nov 2019 )

BAFX Products - Extra IR Receiver BAFX Products IR Repeater Kit Standard

This ir receiver is for use with the bafx products ir repeater kit (not for use with the wireless version). To use this ir receiver with your devices you must also have purchased the bafx products ir repeater kit. The bafx products ir repeater kit has ports for 3 ir receiver and only comes with one, if you need to add a second or third ir receiver to your kit, this is what you will need to do that! please note: plugging this receiver directly into the ir receiver port on your devices will not work! we also cannot guarantee compatibility with any other brand of ir repeater kits! specs: 5' from tip to tip 4' 10" actual cable length only for use with bafx products ir repeater kit 1 year manufacturer warranty against defectsplease note: when using more than one ir receiver with your ir repeater kit only one of the ir receivers can be in view of a signal from the remote control at a time. If both ir receivers receive signal from a remote at the same time you will experience a delayed or even no response from your device.

BAFX Products - Extra IR Receiver BAFX Products IR Repeater Kit StandardBAFX-Products-Receiver-Repeater-Standard

BAFX PRODUCTS - EXTRA IR RECEIVER BAFX PRODUCTS IR REPEATER KIT STANDARD Pros
Price :    $9.75
  • 1 year manufacturer warranty against defects
  • Extra ir receiver for the bafx products ir repeater kit
  • Not for use with the wireless ir repeater kit from bafx products
  • Not designed to be plugged directly into the ir port on your devices (ie cable boxes a/v receivers)
Brand :    bafx products
Size :    Standard
Model :    BAFX3257
Quantity :    1
Order click here :    normally ships in 24 hours
Biss :    Best Remote Control (bafx products product review) for BAFX Products - Extra IR Receiver BAFX Products IR Repeater Kit Standard available ( Nov 2019 )

bafx products - triple zone ir repeater / remote control extender kit Price : 49, was : 0 as 2018-03-13
USUKDEFRESITJPCNCAGlobal
United States
Great Britain
German
France
Spain
Italy
Japan
China
Canada
World Wide
Bafx Products - Triple Zone Ir Repeater / Remote Control Extender Kit (bafx triple ir kit) Reviewed by on puqus.com

Top bafx products - triple zone ir repeater / remote control extender kit (bafx triple ir kit) Content

The F.A.Q. for bafx products - triple zone ir repeater / remote control extender kit

This is an outstanding device. I replaced an older generation repeater, that was connected to a universal remote, and in comparison, this was flawless. It set up easily, and repeated my ir sensor to a hidden cabinet flawlessly. The bonus was that the repeated signal in the hidden cabinet was extremely strong, which meant that i did not have to hunt for the ir sensor on the front of the av receiver, or blue ray recorder.

A number of questions have been asked here.

Showing 20 Q&A on BAFX-Products-Repeater-Control-Extender

(0) Question: I have an old ir extender that does a miserable job with my uverse wireless cable box. how does the bafx repeater do with uverse?


(1) Question: How long of an extension cord can be used with the receiver? i see that it is 5 feet long and can be extended with a 3. 5mm cord. does that have a max?


(2) Question: What type usb cable do i need to power this device? type n h or m are the options of the startech 3ft cable on online store.


(3) Question: Why doesn't this work with marantz products?


(4) Question: Will the bafx repeater work with my comcast cisco rng200n cable/dvr box ?


(5) Question: Can anyone say with certainty this will work with directv dvr and directv genie plus other components? seems there are several conflicting opinions!


(6) Question: Does anyone know for sure if this repeater works with the samsung smt-c5320 cable box? my current repeater system does not.


(7) Question: What is the length of the receiver cable?


(8) Question: Without thinking i purchased extra emitters with 3 heads instead of 2, will the 3 head emitters work with this unit?


(9) Question: Can i directly connect (without ir receiver dongle) into ir receiver port from source like 'global cache ip2ir itach wired tcp/ip to ir'?


(10) Question: This item can work with my logitech harmony one remote?


(11) Question: My soundbar blocks my sony tv ir sensor. is this ir repeater compatible with tvs?


(12) Question: Does this product work with the sony str-dn1050 receiver?


(13) Question: I have a comcast rng150n box made by pace. does anyone know where the ir sensor is on that box?


(14) Question: Does it work with yamaha receiver


(15) Question: Is this 250 v or 110v. thanks


(16) Question: Does it work with an oppo blu ray player



(note) Question: where/how to get Bafx Products (manufacturer's brand) accessories & similiar Bafx Products's products

Click to Show/Hide the Answer
Answer:

Click on the marked text to copy to Clipboard

Wasn't really sure what i was going to get with this. But i don't care what tv or system i get, i'm going to be using this with it. My xbox one's remote is horrible and has to be pointed right at the xbox to work right. But with this the receiver picks up the remote pointing towards the wall and i dont have problems anymore. The ability to hid the boxes is nice too.


Accessories & Supplies 704182, Audio & Video Accessories 235271, Electronics 282271, Remote Controls & Accessories 442371, Remote-Control Extenders 16393011Top Bafx Products - Triple Zone Ir Repeater / Remote Control Extender Kit (bafx triple ir kit) FAQ Content

Best bafx products - triple zone ir repeater / remote control extender kit (bafx triple ir kit) in review

This box was exactly what i was looking for to put in a closet in the hallway next to my den. I connected my cable box, dvd player, etc to the box in the closet. I then ran one single hdmi cable from my tv on the wall in the den up to the attic and then down to the closet in the hall to this box. Now i can use my universal remote in the den with all of my devices in the closet. There are no boxes or cables visible in the den, just a tv hanging on the wall like a portrait. Note: when i say "i, " i mean i had someone else with expertise to install.

W. Perez, Sutton

You might like to see Verimark usb fingerprint key, innovation, quality, and trust have made kensington the standard in device security for more than 25 years. kensington is expanding that expertise to data security by introducing the -kensington verimark usb fingerprint key, black k67977ww
  • Highlight: Sign-in To Windows With Just Your Fingerprint, No Need To Remember Usernames And Passwords.
  • Highlight: Fido U2f Certified - Your Fingerprint Can Protect Your Cloud Based Accounts Such As Google, Dropbox, Github And Facebook With Fido Second-factor Authentication (requires Chrome Browser).
Best Buy Kensington Verimark Usb Fingerprint Key, Black K67977ww (Computer Input Device) K67977ww Kensington Verimark Usb Fingerprint Key, Black K67977ww (Computer Input
Or you might like to consider Galaxy Tab S3 9.7-inch, 32gb Tablet , Samsung Galaxy Tab S3 9. 7-inch, 32gb Tablet W/ S Pen (black, Sm-t820nzkaxar) -Samsung Galaxy Tab S3 9.7-inch, 32gb Tablet Black, Sm-t820nzkaxar
  1. Addition: Our Revolutionary S Pen Is More Precise And Pressure-responsive Than Ever, And Never Needs To Be Charged, Liberating You To Create, Translate, And Navigate Without Limits.
  2. Addition: Powerful Quad Speakers, Tuned By Akg, Calibrate With Your Movements As You Rotate The Galaxy Tab S3, And Intuitively Reflect What's Playing On-screen.
Half Price Samsung Galaxy Tab S3 9.7-inch, 32gb Tablet Black, Sm-t820nzkaxar (Tablet Computer) Sm T820nzkaxar Samsung Galaxy Tab S3 9.7-inch, 32gb Tablet Black, Sm-t820nzkaxar (sm

. Lisa, Wokingham says

This has proved to be a great solution for our theatre room which has its receiver, cable box, etc in an adjoining room. Our theatre room came with another ir repeater which i could not get to operate properly. I had this one hooked up in about 10 minutes including running cable through the wall and i was in business. I was impressed that it worked on the first try when i hooked everything up.

R. Guest, Champagne-Ardenne

If you have a dead logitech 890 this is an ideal device for replacing it without having to make hardly any changes in your audio/visual installation. The ir emitters you have in place for the logitech are compatible with this so there's no need to string new ones through your cabinet. All you have to do is attach the ir receiver (about one inch x one-half inch) somewhere outside the cabinet where it is exposed to the ir beam from your remote. It even has a "feedback led" to show you it is receiving the signal. It's that easy-it took me all of 10 minutes to set up.

. Garner, Isle of Wight says

Just set this up with my verizon fios hd dvr (don't ask me the model) and it worked perfectly. I don't know what was in the instruction manual because the repeater is clearly labeled for where to plug everything in. Worked perfectly and definitely worth the money, which was cheaper then some of the solutions out there that don't work with verizon. Already recommending to my friends!

Y. Crawford, Bury

Using to replace a different repeater who's receiver died and could be replaced. I use it to control 4 devices. It works flawlessly. Price is phenomenal for the quality. Customer service was incredible with responses to my questions. Also i extended the receiver by patch in over 25' of cat 5 cable. The receiver has 3 small wires under the sheath. So you will need a cable with at least 3 wires. Just make sure the colors match up.

. Adrienne, Blackpool says

Allows you to hide all the components and the rats nest of cords in a closet and still operate your home theater as if all your equipment is sitting below your screen. Easy to set up and works perfectly. This is easily one of the best deals on online store.

K. Elizabeth, Victoria

Been using for about a week and it's been great. Extremely easy to setup and, so far, is working as expected. . Couple of thoughts:. Be sure all cords are firmly installed into the control block - ensure you hear a click. Range: has been great but will be affected by where you put the receiver. They provide a solid number of ir blasters, probably more than enough for most setups. . Mine is working fine with my sony tv (power on/off) & onkyo receiver with no issues. I still use my xfinity remote b/c it's rf and is the voice remote which works great. Otherwise a great ir repeater setup at a very low cost.

. Judith, Indiana says

The repeater end sticks to the face of the controlled device (directly over the ir detector) with peel-off adhesive. This was a little unnerving (being a bit persnickety about my av devices), however, boy does it work well. No ir crosstalk to other devices and no lag. This was a huge improvement over the one i had previously that stuck to the inside of the av cabinet doors.

. Lynette, Alberta

Great product. I moved into a new home with a built-in entertainment center. All of my electronics are behind cabinet doors and as a result i was unable to remote control any of them. This ir repeater not only enables remote control of all of my electronics behind closed doors but it does it better than before when i had the doors open and had to point the remote control directly at each item. Now i can point the remote control in almost any direction and it will control the electronics. In other words, it does not have to be pointed directly at the item to be controlled.

O. Campbell, Kentucky says

Works as advertised. Exactly what i was looking for, and a replacement for some $4500 control system that my integrator wanted to sell me. . We (actually my installer) spliced the sensor part, and that was not a problem at all. We ran it through cat5 cable that was already installed in the wall.

E. Courtney, Michigan

Who knew they had this sort of thing and why didn't anyone tell me about it. My wife has bugged me for years to set up a closed door cabinet with all the av equipment inside. I said no problem all we had to do was open the doors for the infrared controllers to work. Now i find this and it just blows my mind. It came in a box about 4"x4"x3" and i said no way this is the whole thing. It is. The ir receiver 'eye' is smaller than a quarter in size and maybe as tall as two quarters stacked. Very small and discreet. The controller box is also small and can be mounted to the sidewall of the cabinet with ease. The four distribution cables powers two very small ir emitters each that attach over the ir receiving eye of a device. Each emitter has an adhesive patch that holds it in place. Took maybe 30 minutes to set it all up and it worked the first time and every time. Highly recommended for its functionality, price, and just plain coolness.

C. Michele, Wiltshire says

Works well. In my installation, i extended the receiver wire about 50' through a wall over to my equipment cabinet. It works fine. . I didn't want to stick emitters on my av gear, so instead i found a place in my cabinet where i could mount all of the emitters from the back, aligned side-by-side. They produce enough ir light that the devices in my cabinet work perfectly without a bunch of stuff stuck directly to them. Works great so far. . My only complaint is the green led that illuminates in the receiver when power is applied - it's dim, but still a bit distracting in my home theater.

H. Hannah, Rhode Island says

Works amazingly! it's so nice not having to have a glass door on the front of the entertainment cabinet (i switched to a solid cabinet that looks much better in the living room). The sensor for this is not an eyesore and is very sensitive to the remote control. Picks up signals much better than the dvd player/stereo/cable box/etc did through the glass doors and a small led lights up on it when it receives a signal from your remote control. It comes with one sensor to mount outside the cabinet and 8 ir repeaters that can be stuck inside the cabinet. I did find the repeaters to be fairly directional, which wasn't much of a problem for most components, but my cable box was very finicky and the ir repeater had to be aimed right at the correct spot. Just a little trial and error finding a good position to stick it and it now works flawlessly. Would definitely recommend for any application where your remote control may not have a direct line of sight to your electronics.

X. Hakala, North Carolina

I was concerned this would be a pain, but worked perfectly! no set up. Just install it and place the repeater thingy (comes with sticker) over device ir eye. I have it connected to the latest xfinity box, panasonic blue ray, and onkyo receiver. . I'm really pleased and pleasantly surprised with the quality of this device. No more open entertainment center doors!

M. Noguera, Rochdale says

Amazing. I am an installer and have been paying three times the amount of money on this exact product from xantech, calrad, channel vision (all great products). This package had everything i needed. Actually it had way to much. I didn't need all of the 6 dual emitters. Thanks to this company for not holding back and giving us installers all the parts in one box. And they all work:) loved it. Shipping a+

P. Beale, Bedfordshire

I'm used to using the snap a/v units from work (a/v integration company), but this was cheaper than our cost on those units. I extended this unit from my media rack to my 3 tv's after purchasing 2 additional i. R. Eyes, and extended them using bafx's cat-5 extender kit. This added about $42 to the cost of a $27 unit, but i could have saved half of the extra cost by cutting the i. R. Eyes' cables to extend over cat-5 with dolphin connectors. I prefer the cleaner look. I only have a blu-ray player and denon reciever on this repeater, both working as expected. Only notable thing is to know that if the (presumably intentionally very bright) blue light is constantly illuminated on the main unit it means there is an input fault, in my case one of the wire pairs on my cat-5 extension cable were shorting. I had to replace an rj-45 tip at one tv to regain functionality. . Included is a photo of the main unit (only 2 of my inputs installed, 1 output) and one of the ir repeaters on a blu-ray player over the ir reciever.

N. Bullock, Quebec says

I turned my basement living room area into a home theater and one of my goals was to hide the cable box, blu-ray, etc. I used this so that i could just have one cord running through the wall to still be able to use the remote controls. I really like the new setup as it is really clean. The hardest part was finding where the sensor was on my blu ray/surround sound system but once i found that, it was really easy and the remote repeater works every time. Setup just included plugging in the main receiver cable and the subsequent cables that go on the boxes themselves and plugging it in. Probably 5-10 minutes all in. Also mounts to the wall very easily.

V. Shawna, Bradford

This works very well. I was able to set it up in minutes. . It came with plenty of ir nodes for my full entertainment system. I've never had a single issue so far, and it solved my issue of my entertainment systems doors always being open! . . Edit: 8/23/15 added pics of my setup. This thing is still going strong. Absolutely love not having to keep the doors to my entertainment stand open. This is a must have and it works extremely well.

L. Nielsen, Rotherham says

Fantastic! i even spliced the ir receiver wire so it now runs probably 30 feet and works great. Only thing to note is the self adhesive on the emitters hasn't consistently been effective as staying attached to the equipment. However, they do get jostled every now and then. If they aren't being touched/bumped they stay on just fine.

. Pearson, Newfoundland and Labrador

I'm running this over a good 30' of wire and it works flawlessly. I love that i can always point the remote at the tv and don't have to do that over-the-shoulder bit that we always had to do before getting this. Set-up was a breeze and the components are very discreet. I'd highly recommend this to anyone with their a/v equipment in a cabinet or in a different room.

J. Wells, Kirklees says

I purchased this unit, taking a chance that it would work with my xfinity xr 11 remote; the one for the x1 system that has voice control. I asked if anyone knew whether the unit worked with the remote. One responder said yes, another no. So, i took a chance. I plugged it in, tried it and it worked. I can keep the door closed on my closet and operate my denon avr-1712 receiver. My wife is happier.

Z. Claudia, Tennessee

I made a new entertainment center with slats rather than windows and my universal remote could not hit any of the ir sensors anymore. Enter this product, a perfect solution to this common problem. The hardest part was finding the ir receivers on my equipment, luckily a few manuals had the location and the few that didn t i was able to pinpoint through trial and error. Does exactly what it claims to and i would recommend to friends.

T. Rose, Montana says

I used a competitors ir repeater in the past and although it worked well about 90% of the time, when i went to order another one for another room it was on back order. So a quick online store search resulted in the bafx ir repeater so i thought i would give it a try. When it was delivered i was very impressed with the packaging of the product as well as the build quality as compared to the competitors product. I also liked that it came with 2 additional repeater cables as compared to the competitors repeater. It was plug and play and has worked 100% of time. I am using my directv genie remote which sends both ir and rf signals and it controls all of my equipment. I ordered the extension cable as i had a long run through a drop ceiling and it works perfectly. I have a plasma tv so i followed the instructions and mounted it more than 1 foot from the tv to avoid interference. I will most likely be replacing the competitors with this one as it as been 100% successful in sending the ir signal. Price is really good as well.

A. Nees, South Tyneside

Good value. Works better than my original remotes (more sensitive) and almost a requirement for a universal remote to resolve the conundrum of how to aim your remote at four devices simultaneously. The receiver is unobtrusive and can be placed outside the cabinet in a location that will readily receive from remote(s). The long cords and qty 4 re-transmitter (with two transmitters on each cord) allow controlling 8 devices and provides a lot of flexibility in device placement. I love it and should have gotten one long ago. Getting a 2nd one for another location.



Top triple zone ir repeater remote Review

Disadvantage and Critical reviews

. Julia, Bedfordshire says

I'm very happy with the repeater which works very well. I've had it installed for about a week now. The range for the ir receiver is about 10 yards, wish it would be longer, but not a deal breaker for me. . Update: after about one month, i realize the range is actually more like 10 feet, not 10 yards! it's a struggle to use the remote control from across the room. I would expect it to have better range. Another negative is that the adhesive wore off and the ir receiver fell off of the tv. I had to use some extra double-sided tape to reinforce it. I'm changing my 5-stars to 3. 5-stars.

I. Susana, New South Wales

It works ok. The receiver gets 100% of the signals, but not every one is sent through to the sender. So you do have to push the button several times every so often to get the signal through. Good price and easy hookup though.

T. Debra, Vermont says

Using harmony one with this item. It works but not without a little frustration. Consistency is the problem. Some functions work fine and 1 minute later it doesn't. Okay pit stop until i research a more expensive, but 100% working solution for my theater. Perhaps this would do better in a less elaborate set-up.

W. Parker, Hounslow

Worked well and was very budget friendly, but have had to replace it. My plasma tv simply provided too much interference for it to consistently receive signals from my remote. Loved the fact i could straight plug using a 3. 5mm cable from the box to my yamaha receiver in lieu of having to locate the ir eye on the front of the receiver. The biggest downfall is this will not work with my uverse box (motorola vip-1200). It worked intermittently with my uverse dvr (motorola vip-1225), but absolutely would not work with the non-dvr boxes. Spent a little more money on another product that works flawlessly.

E. Guest, North East Lincolnshire says

This product only gets 3 stars cause i believe it would work if it doesn't need to be extended. I needed to extend these wires to like 35' and normally when i do that i just cut the wire and extend with cat5 wire. I have done it many times on other versions of repeaters. But trying to do it with this model i couldn't get it to work so i'm not giving it one star cause i modified it.

S. Connie, Nottingham

I purchased this to extend the ir signal into another room in my basement bar / mancave. My setup is a main room with the tv and speakers but i had to put my old harman/kardon avr 500 receiver in a storage room because it is so bulky. Whenever i wanted the volume changed i'd need to run into the other room to change it which was very inconvenient. I bought the bafx ir repeater to make my life a little easier. . When i installed this, i couldn't get it to work. I can see that the repeater is getting the signal and that the emitters were repeating the signal but i think the plastic was too dark on my receiver for the signal to get through. Luckily the harman/kardon receivers have a "remote in" on the back so i plugged a online storebasics in to the ir transceiver and the other end into the "remote in" on my h/k and it worked! . . I am currently sitting 20ft away from ir receiver and it picks up my remote signals perfectly. . I only gave it three stars because i feel that the ir repeater is a little weak even though i did get it to work, i doubt this fix would work for most people. I do feel that this is a good product though.

P. Stacey, Stockport says

It works and has good range but it does seem to not reproduce accurately. I have a mediasonic tv tuner and a monoprice hdmi switch. If i point the remote directly at the receiver and change the channel the ir signal that gets sent also changes the input of the hdmi switch. The remote does not do this if i point it directly at the hdmi switch and change channel. I tried pull the sender away from the ir port on the switch in case it's because of not lining up correctly. Same results.

Z. Delgado, Bourgogne

I had hoped this product would enable me to hide my av equipment, and it did. To a point. It works with my pioneer av receiver just fine. . It does not work well with my sony bd players. I even went to the extreme of disassembling my sony blu-ray player and placing the emitter directly on the ir sensor on the board inside the unit. It still was unreliable. I don't know of the issue is with this product or if sony has crappy ir receivers in their stuff, but whichever is the case it doesn't matter. If you have sony equipment, you don't want this repeater.

V. Donna, Kentucky says

Good overall concept but wouldn't work with my pyle speaker or at&t vip2500 box. It was for outdoors, may have been too bright out there.

R. Rowe, Solihull

Didn't work for me, regardless how i messed with it. I ended up returning.

J. Yvette, Hartlepool says

Had high hopes tried different ports and transmitters lights on main unit would blink when pressed and on receiver but would not work on my lg home theater blurry or samsung blurry waste of money

D. Jackson, Virginia

Bought this in may and just hooked it up yesterday. Worked fine the first day; second day, not so much. Now only works sporadically and is worthless. Has been over a month since i ordered it, so i can't return it. In the trash it goes. I do not recommend this product!

C. Emily, Minnesota says

This is better than the first ir repeater that i got (really cheap one) but it's still very inconsistent. Sometimes it works like it's supposed to, sometimes it's a nightmare - and the latter always seems to happen when i have company over.

Q. Mable, Oregon

I bought this because my sound bar blocked the ir receiver on my lg tv. At first i was very happy with this situation but as it turns out it 1) has a one second latency between the time you push the button on your remote and the time it outputs ir. 2) it can get lost where you click a button fast and it will a) not see all of them for instance maybe see 10 out of 15 presses, b) store some in a buffer like a old keyboard where you could type really fast and stop and the text would still be going on your computer. When using my netflix app and trying to fast forward often times it is more frustrating to use than to not use it. I found myself moving my sound bar out of the way or disconnecting it completely so i could just use the tv's ir directly and it worked as intended. I honestly thought this type of product was going to be overkill and so i spent the money for trouble free operation. Unfortunately that just isn't the case. I would not recommend it to a friend. I give it 3 stars because it probably will work fine for most people and most uses but it isn't as good as having clear sight to your original equipment.

Y. Veronica, Provence-Alpes-Cote dAzur says

Had many issues with it not working intermittently. I contacted the manufacturer directly and they were very responsive and willing to replace the unit, however i found that putting 2 layers of processed film negative over the ir receiver did the trick.

L. Theresa, Leicester

The input for the ir receiver has to be rigged due to poor connection and fit.

A. Noguera, Northumberland says

Good repeater. the eyes could stick better

. Wells, Waltham Forest

Works with most equipment. Did not work with arris vms1100. This should have been mentioned.

X. Fabian, Norfolk says

This device has constant intermittent issues. Since i have done the work around below, i have had no issues. I am a little surprised the manufacturer did not catch the problem. I bought 3 and all 3 units had issues in different areas. But the work around below will fix. . Problem: double sided tape degrades signal performance to receiver. . 1. Remove the manufacturer tape, completely. It will take 5 or 10 mins to rub off or if you can find a chemical, may be faster. 2. Buy aluminium foil tape, like the one for ac units. This has a great reflective quality. Buy only the single side (not double side). 3. Tape over the ir blaster (not in between like the manufacture method). This ensures that there are no in between interference. 4. Optional: the foil wrap can be eye sore, depending how you did it and if the device is visible. You can use black duct tape to cover over the aluminum foil tape. It will be less of an eye sore.

F. Kristen, Derbyshire

Still only works some of the time , seems remote has to be fairly close in order for it to register

K. Rose, Connecticut says

I am having some problems. Here is what i wrote to bafx. I just wrote to them so i haven't received a response yet. . I purchased the single zone ir repeater kit in july 2016 from online store. I had been using the nextgen rf to ir kit for a number of years and it worked well. The only reason i switched is the batteries that power the rf emitter in the remote did not last long and i got tired of changing them constantly. I have only one component that i need controlled. It is a panasonic dmp-bdt361 blu-ray player. It has a door that flips down in the front that the ir signal passes through to get to the ir receiver on the unit. When i installed your system i decided to use the nextgen emitter head just for convenience since it was attached to the blu-ray player and see if it worked. It did, and has been since installation. I had to move some gear around and i decided to replace the nextgen emitter head with one of the ones that came with your kit. No luck. I tried moving the head a bit on the flip down door and tried a number of the other emitter head cable included with the kit. None worked. I made sure in each case the second head on the cable was behind the unit being controlled. Out of frustration, i cleaned off the adhesive on the nextgen head and replaced it with one of the extra adhesive pads you include with the kit. Worked right away just as it had since july of 2016. . How is it that an emitter head from a different company works perfectly and yours does not? please explain.

H. Pearson, Northern Territory

It doesn't have good range and it's a little slow to process it serves its purpose but next time i'll buy a better one

O. Mahood, New Hampshire says

Tip for directv owners. I found it very hard to exactly place my emitter where it would work. I knew where the ir sensor eye was. Here's what was happening. I would move the emitter around the dtv unit, once it started changing channels, stick it on, then nothing! move it again, channels change, stick it, then nothing again? what the heck? it seemed as though nanometers in one direction or the other would make it work or not work. I was positive the eye was getting the signal & not the sensor on the dtv unit, so there was no cross signal. Then, i realized, whenever i moved my hand away from the emitter after i stuck it to the dtv unit, it didn't work? so i cupped my hand over the area of the dtv unit where i had the emitter stuck. Then the remote worked no problem? it's like my hand was reflecting the signal back to the unit? i don't know. So i closed the door to the cabinet, guaranteeing the dtv unit was hidden. Nothing worked. Then i opened the cabinet, took a piece of duct tape (it was within reach). Taped a piece to the top of the dtv unit and let it hang down over the emitter. Like you would a post it note, or me cupping my hand over it. Then boom. It's been working ever since. I used the duct tape to reflect the signal back to the dtv unit. The unit will never be seen in the cabinet, so i don't mind the duct tape. But to be clear. No other device had that issue. Only the dtv unit.

B. Neva, Buckinghamshire

I just received the bafx repeater kit, and it does not work with my satellite receiver. I have a directv hr23 hddvr. I have tried 3 sensors in a variety of locations around the ir sensor on the receiver. All other devices work, but this is the main unit that i need this kit for. I do not believe the unit is faulty due to the sersor that works for a different device still does nothing for the directv receiver. Should i continue troubleshooting, or return the unit. I am happy with how it works for the other devices.

M. Julie, Plymouth says

Got this item, spent a ton of time getting it installed in my media closet and it worked for maybe five or six hours flawlessly. It then catastrophically failed. Zero quality control. Now i have to drive to the post office to return it wasting gas money. By the way, i used the positive reviews to make my purchasing decision. This is the second unit i purchased that failed in a very short period of time and had to be returned. Don't understand their extremely poor quality control, bad business model for sure. Don't waste your time ordering this item.

U. Wilson, Wokingham

I mounted a tv on the wall in a guest bedroom and wanted to hide the cable box and dvd player in a closed cabinet. It seems to work ok for the dvd player, but it is hit or miss with the cable box (which is more important). I've tried moving the sensor all over the front and it will work for a few minutes, but then i go away and come back to try again and it isn't working again. It is quite frustrating, especially when guests try to use the tv in that room. If i can work out the issues and get this working more reliably, i will update the review.

N. Hayward, Oxfordshire says

Failed after a year of use. Disconnected and reconnected the device and it no longer works. Was hoping it would last longer.



Leave a Reply

You must be logged in to post a comment.


Back to Top

Related Products

  • Explore more
    Amazshop247 Infrared Apple Remote Replacement (apple1)

    Amazshop247 Infrared Apple Remote Replacement (apple1) 1967

    puqus.com Amazshop247 Infrared Apple Remote Replacement (apple1), Infrared Apple Tv Remote Replacement - Apple Tv 2 3 Mac, Ipod Iphone The Apple Music System Remote Control Gives You Total Command Of Your Music, Photos, Videos, And Dvds From Anywhere In The Room. It Works Front Row A Menu Based, Full Screen Interface -Amazshop247 Infrared Apple Tv Remote Replacement - Apple Tv 2 3 Mac, Ipod Iphone Mc377ll/a
    1. Extras: The Remote Requires A Mac With An Ir Port (most Macs Made After 2005). Frontrow Control Does Not Work With Mac Os X Lion Or Later.
    2. After not using my apple tv for months we finally purchased this and it has been a gem! now we can finally get caught up on our shows. Yay! https://puqus.com/amazshop247-infrared-apple-remote-replacement-19671fuzyd2u/#amazshop247-infrared-apple-remote-replacement
    3. Extras: The Amazshop247 Apple Remote Gives You Total Command Of Your Mac's Music, Photos, Videos And Dvds Via Frontrow-a Menu-based, Full-screen Interface-to Make Accessing The Digital Content On Your Mac Simple.
    Deals Amazshop247 Infrared Apple Remote Replacement (Beauty) Apple01
  • Low Price
    Bafx Products Adapter Repeater Warranty (bafx0004)

    Bafx Products Adapter Repeater Warranty (bafx0004) 1414

    Explore more Bafx Products Adapter Repeater Warranty (bafx0004), - cat5 adapter kit ir repeater kit - 1 year do you have the bafx products ir repeater kit and want to extend the length of the ir receiver or emitters using the existing cat5 connections in your home? sure, you can splice the -bafx products - cat5 adapter kit bafx products ir repeater kit - 1 year warrantyTop Rated Bafx Products Adapter Repeater Warranty (Remote Control) Bafx0004
  • Get Price
    Cable Matters Infrared Remote Extender Cable 10 Feet (203002 10)

    Cable Matters Infrared Remote Extender Cable 10 Feet (203002 10) 2958

    Free Shipping Cable Matters Infrared Remote Extender Cable 10 Feet (203002 10), Infrared remote extender cable 10 remote control solution the cable matters infrared repeater cable is the perfect solution for controlling a blu-ray player, catv box or other video source from your hdtv. install where -cable matters infrared remote extender cable 10 feet
    • Properties: Home Theater Accessory Repeats The Ir Signal To A Dvd Player, Stb Box, Receiver Or Other A/v Source With An Infrared Sensor; Route The Cable Out Of Sight With A Wall Mounted Hdtv; Install The Ir Transmitter End In A Concealed Equipment Closet To Hide A Catv Box And Control It Remotely.
    • The ir range of this extender is incredible! i have a large den, some seats are 20 feet from my tv and i can control it from anywhere in the room. In the past i used a similar ir remote extender and it only worked at a distance of 10 feet or less. . With this device i can easily control my equipment... go to https://puqus.com/cable-matters-infrared-remote-extender-295814edrh3g/#cable-matters-infrared-remote-extender
    • Properties: Simple Installation Of This Lightweight Ir Cable; Locate The Ir Blaster Near The Source Sensor To Repeat The Signal To The Source; Place The Ir Receiver In A Convenient Location With Line Of Sight Of Your Hand-held Remote; Ir Tx And Rx Cables Have Adhesive Circles On The Back For Mounting.
    Deals Cable Matters Infrared Remote Extender Cable 10 Feet (Remote Control) 203002 10

Product Image Gallery

Top-bafx-products-repeater-control-extender-25271ftiqlpu-Content