Datacomm Electronics 45 0024 Wh Pro Power Receptacle (Ce Accessory) 2165

Review for recessed propower kit duplex receptacle

Price was $64.39. I have installed many displays in the past and i have used the old version of this recessed kit. I agree with others about the opening for the av cables that is rather small. I highly recommend using the new monoprice - redmere - ultra slim series high performance hdmi cable's. They are very small and very easy to route on a low profile wall mount installation. I was able to get the display within an 1/2" from the wall. Perfect! just study your kit location and double check. Check for any clearance issues before cutting into your wall. Remember where your studs are. I will be using this kit, hdmi cable and low profile mount for here on out on new installs. If you are after that low profile look, i highly recommend this kit!

-Y. Evelyn

Recessed pro-power kit duplex receptacle straight blade datacomm electronics recessed pro-power kit duplex receptacle and straight blade inlet is used to install power and low voltage cables behind your wall mounted flat panel tv, amplifier, -datacomm electronics 45-0024-wh recessed pro-power kit duplex receptacle straight blade inlet

  • Value: 15 Amp / 125 Volt Tamper Resistant Duplex Receptacle Allows Power To Be Installed Behind A Wall Mounted Tv Or Similar Application.
  • Value: Metal Mounting Wings Are Attached To The Top And Bottom Plates And Fasten Against The Drywall As You Tighten.

Inexpensive Datacomm Electronics 45 0024 Wh Pro Power Receptacle (Ce Accessory) 45 0024 Wh

Buy Now


Foreword

Enables someone like me with patience and a few necessary tools (a cheap keyhole saw is critical) to do a professional installation job. The Best recessed propower kit duplex receptacle ( Jul 2019 ) | Datacomm Electronics-Ce Accessory Review Value DataComm Electronics 45-0024-WH Recessed Pro-Power Kit with Duplex Receptacle and Straight Blade Inlet Low profile design fits behind the industry's thinnest mounts and tvs. 15 amp / 125 volt tamper resistant duplex receptacle allows power to be installed behind a wall mounted tv or similar application. Metal mounting wings are attached to the top and bottom plates and fasten against the drywall as you tighten. Requires 14/2 electrical building wire. Female end of included extension cod is recessed completely into the wall when plugged in to the straight blade inlet. Male end of included extension cord has a 360 rotating flat head allows furniture to be placed flush against the wall for a clean finish. Top dimensions: 6. 87" x 7" x 3. 55". Bottom dimensions: 4. 5" x 6. 67" x 3. 42" .

Datacomm Electronics 45-0024-wh Recessed Pro-power Kit With Duplex Receptacle And Straight Blade Inlet Review (45 0024 wh)

This did exactly what i needed hiding the wires and cables when mounting my tv on the wall. The only thing missing from the kit is the wire needed to connect the 120 volt outlets to the bottom unit. That would give it 5 stars. -H. Alberta

Datacomm Electronics 45 0024 Wh Pro Power Receptacle

Rank
Electronics
Brand
Datacomm Electronics
Color
White
EAN
0053786065398
Product Dimensions
Height:3.55 inches
Length:6.87 inches
Weight:1..95 pounds
Width:7.36 inches
LegalDisclaimer
This Product Contains Chemicals Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm.
Manufacturer
DataComm Electronics, Inc.
Model
45-0024-WH
MPN
45-0024-WH
Total-Items
1
Quantity
1
Part/Serial Number
45-0024-WH
Group-Order
Speakers
Category
CE ACCESSORY
UPC
163121408985
Warranty
Datacomm Electronics Warrants The Passive Components For A Period Of (10) Years And Active Components For A Period Of (2) Years From The Date Of Purchase.

recessed pro-power kit duplex receptacle straight blade Speakers, Datacomm electronics recessed pro-power kit with duplex receptacle and straight blade inlet is used to install power and low voltage cables behind your wall mounted flat panel tv, amplifier, and other audio and video devices. this power relocation kit allows you to pass low voltage cables and power through the wall, creating a clean and professional look for your home theater. Datacomm Electronics 45 0024 Wh Pro Power Receptacle (45-0024-WH-Datacomm Electronics).

Datacomm Electronics 45 0024 Wh Pro Power Receptacle Speakers

PROS
  • This was the perfect solution for my wall mounted tv. It keeps you from running a power cord behind your wall, which may violate building code. I had some romex lying around and used about 4' to run from the upper box to the lower box. Cut out holes with a jigsaw. If you do the same, i would have a shop vac handy. Keeps me legal, looks clean, and comes at a fair price!
  • Makes my install look so good. All the cables are in the wall
CONS
  • You need to get your own wire to finish the installation.
  • Looks ok but the bottom box did not fit in the hole that the template had you cut. Would not purchase again
  • I have ordered a series of datacomm products all of which have come with an electrical cord. I do not know why this particular product does not include the electrical cord. This product is really for professionals (i had to buy 25 feet of romex and strip/connect the electric wires in order to connect the unit). Datacomm should have made this more clear in the title of the product.

recessed propower kit duplex receptacle DataComm Electronics 45-0024-WH Recessed Pro-Power Kit with Duplex Receptacle and Straight Blade Inlet (Switch to Mobile/Desktop Version)

It wasn't bad. I was very impressed. You can buy the same pieces piece-meal and pay less, but everything here is in one box. The access for the cords could have been a bit larger, but this isn't a deal breaker. I'll tell you, sometimes humans are pretty clever.

Datacomm Electronics 45-0024-wh Recessed Pro-power Kit Duplex Receptacle Straight Blade Inlet
Click to see NoticeDatacomm Electronics 45 0024 Wh Pro Power Receptacle (Ce Accessory)"This is exactly what i was looking for to run the cables in my wall. I wouldn't call myself very handy, but if you know how to use a fish tape this is pretty simple. It took me about a total of 30 minutes to get it all done and the price was great."

(0) Question: What are the dimensions of the wall plate?


(1) Question: Is there enough room to install this on a plaster wall with 1/4 lath and plaster? are the wingers able to extend deep enough for this?


(2) Question: How deep is the unit? i have a 2x3 studded wall with 1/2" drywall



Audio Cables » Video Cables » Power Cables » Featured Categories » Gold Merchants » Specialty Boutique » Datacomm Electronics 45 0024 Wh Pro Power Receptacle (Ce Accessory) 45 0024 Wh


WALI Universal Sound Bar Mount Bracket Mounting Above Under TV, Fits Most 32 to 70 Inch TVs, 33 Lbs. Weight Capacity SBR201 , Black

There is really no designated way that this meant to be used. It is very universal. I wanted it pretty snug between the sound bar and tv so the mount doesn't show in the gap. I had to try a bunch of positions but after 10min of fiddling around i found the perfect method for my tv and sound bar. I used it with a 40in tv and a 28in sound bar. Definitely would recommend.

Please check the mount compatible for your speaker:compatible with soundbar. Check your soundbar weight less than 33 lbs (15kg). Mounting holes less that 24 (600mm)horizontally and 16 (400mm)vertically. Product specifications:material: 2. 5mm steel color: blackloading capacity: up to 33lbs /15kgsize of tv: works with most 32"-70" flat panel tvsinstallation options: install the soundbar on the top or bottemof the tv, install the soundar on the bottom of the tv wall mount. Vesa compatibility: 200x100, 200x200, 300x300, 400x200, 400x400, 600x400mm. Package includes:2 x wali sound bar bracket (black)1 x user manual 1 x mounting hardware kit

WALI Universal Sound Bar Mount Bracket Mounting Above Under TV, Fits Most 32 to 70 Inch TVs, 33 Lbs. Weight Capacity SBR201 , BlackWALI-Universal-Bracket-Mounting-Capacity

Wali Universal Bracket Mounting Capacity (wl sbr 201) FAQ.

It worked fine for me. I connected my samsung sound bar on top of my samsung flat screen which is mounted on a moveable stand 5 feet off the floor. It fills the room with so much more sound up there. I'm very pleased. -Notice from N. Sherry, District of Columbia

Click to Show wali universal bracket mounting capacity (wl sbr 201) Details

Required some creative positioning to fit a 65" lg. The back of the tv isn't flush so these brackets wouldn't mount correctly. I was able to get them to work by attaching them to the mounting points for the "legs, " but it isn't ideal. The brackets are made well and come with a wide range of mounting hardware though. Just make sure your tv has a flat back before you buy these.

Wali-universal-bracket-mounting-capacity-(wl-sbr-201) set picture

- Q. DonnaI used this bracket on a sharp 43" tv and a jbl sound bar. I had to do a little out of the box thinking with it, but was able to get it to work using the wall mounting bracket that came with the sound bar. I really liked the amount and variety of screws and other hardware that came with the bracket. I think this is a great value for what you get.

Did exactly what it was supposed to do. Before you tighten up anything, you can swivel the arms to align the holes how you need them to fit. They seem sturdy to hold our vizio sound bar and have had no problems since installing! definitely recommend.

A. Rose, Alberta

WALI UNIVERSAL SOUND BAR MOUNT BRACKET MOUNTING ABOVE UNDER TV, FITS MOST 32 TO 70 INCH TVS, 33 LBS. WEIGHT CAPACITY SBR201 , BLACK Spotlight
Brand :    wali
Color :    Sound Bar Bracket
Size :    Sound Bar
Weight :    2.00 pounds
  • Flexible: adjustable bolt slots with sound bar sitting above or below the tv. fits most tv wall mounts (fixed, tilt, full motion, articulating, interactive).
  • Compatibility: soundbar mount bracket fits most 32 to 70 inch tvs. vesa 200x100, 200x200, 300x300, 400x200, 400x400, 600x400mm. dimensions: 17. 5(l) x 6(w) x 0. 1 (h) inches.
  • Package includes: 2 x wali sound bar bracket , 1 x mounting hardware kit, 1 x user manual, 10 year protection.
  • Built: the brackets are constructed from black brushed high quality 2. 5mm thick steel to hold sound bars up to 33lbs/15kg.
  • Features: stylishly connects to tv wall brackets or directly to the tvs on stands, instead of mounting to wall. ideal for corner installations.
Price :    $12.99 (was $13.99)
Model :    WL-SBR-201
Quantity :    1
Order click here :    normally ships in 24 hours
Receiver Or Amplifier :    Best Audio Or Video (wali product review) for WALI Universal Sound Bar Mount Bracket Mounting Above Under TV, Fits Most 32 to 70 Inch TVs, 33 Lbs. Weight Capacity SBR201 , Black available ( Jul 2019 )

MIDLITE Power Jumper HDTV Power Relocation Kit Includes Pre-Wired Metal Clad Cable , White 22APJW-7R-MC

The midlite power jumper hdtv power relocation kit is a comprehensive product to deliver power and low voltage behind a wall to hd tvs. Easy to install without a professional, this product relocates power and a/v cables to wall-mounted hd tvs. Wiring behind the wall keeps the area looking pristine.

MIDLITE Power Jumper HDTV Power Relocation Kit Includes Pre-Wired Metal Clad Cable , White 22APJW-7R-MCMIDLITE-Jumper-Relocation-Pre-Wired-22APJW-7R-MC

MIDLITE POWER JUMPER HDTV POWER RELOCATION KIT INCLUDES PRE-WIRED METAL CLAD CABLE , WHITE 22APJW-7R-MC Benefits
Brand :    midlite
Color :    WHITE
Weight :    2.40 pounds
Model :    22APJW-7R-MC
Quantity :    1
Order click here :    -
Speakers :    Best Cable Or Adapter (midlite product review) for MIDLITE Power Jumper HDTV Power Relocation Kit Includes Pre-Wired Metal Clad Cable , White 22APJW-7R-MC available ( Jul 2019 )
Price :    $89.99
  • Easily relocates power & a/v cables to wall-mounted flat panel display
  • Power is recessed for snug-to-the-wall flat panel installation
  • Prewired-no electrician required
  • Use a remote surge protector with the kit to protect hd tvs
  • Extends power & low voltage behind the wall to mounted hdtvs

Stanley 15-206 Jab Saw Wood Handle

Designed especially for plasterboard. Make cut-outs for electric outlets etc. Self-starting point-sharpened for plunge cuts. Blade epoxy-bonded and ferruled to stained wood handle for a longer hold. Features. Wood handle. Blade size - 6 in.

Stanley 15-206 Jab Saw Wood HandleStanley-15-206-Jab-Wood-HandleThe stanley 6-inch wallboard saw is designed especially for making cuts in plasterboards. The saw has a self-starting point sharpened for plunge cuts, and the 6-inch blade is epoxy-bonded and ferruled to the handle for a connection that is three times as durable as non-epoxy bonded blades. This saw is backed by a limited lifetime warranty. To choose the saw that's best for you, view the comparison chart of stanley saw blades.

STANLEY 15-206 JAB SAW WOOD HANDLE Pros
Brand :    stanley
Color :    Wood
Size :    Pack of 1
Weight :    0.25 pounds
  • Blade size - 6 in.
  • Great gift idea.
  • High quality new!
  • Wood handle
  • Excellent quality.
Price :    $3.99 (was $4.95)
Model :    15-206
Quantity :    1
Order click here :    normally ships in 24 hours
Home Improvement :    Best Tools (stanley product review) for Stanley 15-206 Jab Saw Wood Handle available ( Jul 2019 )

Mounting Dream Premium Full Motion TV Wall Mount Bracket Fits 16, 18, 24 inch Wood Stud Spacing, TV mount Articulating Arm 42-75 Inch LED, LCD, Plasma TV up to VESA 600x400mm, 132 lbs MD2298

This is the second mounting dream wall mount i purchased because i was impressed with the first one in my bedroom. I purchased this one for the living room. My 65 inch lg super uhd looks great on my wall. Very well made. I will only buy this brand from now on.

Fits 42-75" tus this mount fits most of 42-75"lcd/led/plasma tvs sold today. It fits tvs with mounting holes as close as 8"x8" or as wide as 24"x16" (in tv terms - vesa 200x200mm to 600x400mm). Specifically, it fits vesa 200x200, 300x200, 300x300, 400x200, 400x300, 400x400, 500x300, 600x200, 600x400mm) fits wood stud spacing of 16 and 24 , one-piece long wall plate design fits for solid concrete wall and wood stud spacing of 16 and 24 . One piece wall plate design differs from wall plate which is knocked down into two pieces, no need wall plate assembly. Long wall plate provides centering flexibility for wood stud installation and no need extra extension bracket or plywood's. Smart tv hanging design and safe guard clips brackets attached with tv hang onto wall plate easily, two tube clips lock brackets with tv onto wall plate in safe manner supreme dual arms with 132 lbs. Loading capacity dual arms extends to 18. 5", and retracts to 2. 5" to save place. It adopts automatic robot welding technology for smooth and stable movements, holding tv up to 132 lbs. Full motion with dual spring loaded handles with +5 /-15 tilt, +/-45 swivel and +/-3 rotation, the mount maximizes viewing flexibility. Post-installation level adjustment allows the tv to perfectly level. Dual spring-loaded handles enhance stability cable management cable clips and velcro cable ties offer cable management for neat look includes all necessary mounting hardware, 6' hemi cable and bubble level this mount ships with hardware for both wall and tv mounting. Bubble level makes leveling out easy and convenient heavy duty steel construction and rohs certified constructed with heavy duty steel materials with durable powder coated finish. This product is robs certified (european union directive standard of restriction of hazardous substance), aiming to protect human health and environment

Mounting Dream Premium Full Motion TV Wall Mount Bracket Fits 16, 18, 24 inch Wood Stud Spacing, TV mount Articulating Arm 42-75 Inch LED, LCD, Plasma TV up to VESA 600x400mm, 132 lbs MD2298Mounting-Dream-Articulating-600x400mm-MD2298

Mounting Dream Md2298 Articulating 600x400mm (Av Furniture) FAQ.

This unit works great, i needed a mount that would work on 24" spacing of the studs. Mounting dreeam is a dream to mount and it handels our 75" sony perfectly. We are buidling a new home in the future and will be ordering another fr a older 70" sony (very heavy) when it is ready to move. The mount is very well built and should not have any problems with the older, heavier tv. -Notice from C. Shirley, New Mexico

Click to Show mounting dream md2298 articulating 600x400mm (av furniture) Details

Very heavy duty, works great , especially for a long room. You can swivel to view from any direction including up and down. Excellent unit.

Mounting-dream-md2298-articulating-600x400mm-(av-furniture) set picture

- D. TraceyGreat mount, a little difficult to mount because of the weight but after that it works great on my 65" tv. I love being able to move it to the side or back to get to my equipment hookup on my stand below. Before the tv was always in the way. Spend the little extra and get this bad boy for your large tv investment!

Good one. Had a tough time to mount because of heavy weight. But otherwise very sturdy and holds my 75 inches 90 lbs sony xbr75x940d tv. The only thing that always worries me is the fact that tv may slide out. Hope it will not!

U. Ross, Luton

MOUNTING DREAM PREMIUM FULL MOTION TV WALL MOUNT BRACKET FITS 16, 18, 24 INCH WOOD STUD SPACING, TV MOUNT ARTICULATING ARM 42-75 INCH LED, LCD, PLASMA TV UP TO VESA 600X400MM, 132 LBS MD2298 Advantages
Brand :    mounting dream
Color :    16"-24" wood stud
Weight :    22.00 pounds
Model :    MD2298
Quantity :    1
Order click here :    normally ships in 24 hours
Home Theater :    Best Av Furniture (mounting dream product review) for Mounting Dream Premium Full Motion TV Wall Mount Bracket Fits 16, 18, 24 inch Wood Stud Spacing, TV mount Articulating Arm 42-75 Inch LED, LCD, Plasma TV up to VESA 600x400mm, 132 lbs MD2298 available ( Jul 2019 )
Price :    $78.69 (was $84.99)
  • Supreme arms: holds tv up to 132 lbs. with 18. 5" extension and 2. 7" depth to wall, adopting automatic robot welding technology for smooth and stable movements. cable clips on arms offer cable management for neat look.
  • Full motion: +5 /-15 tilt, +/-45 swivel and +/-3 rotation for maximum viewing flexibility. dual spring-loaded handles design for easy tilting angle adjustment. all hardware, 9' hemi cable, mounting template, bubble level included. finish of the tv mount and all hardware is rohs (restriction of hazardous substance) certified.
  • Tv wall mount fits for most of 42-75" led/led/plasma tvs in 132 lbs. , with max vesa of 600x400mm/ 24" x 16" (from 200x200, 300x200, 300x300, 400x200, 400x300, 400x400, 500x300, 600x200, to 600x400mm). please check vesa (mounting holes pattern), studs spacing, possible blocked cable/input and tv weight to ensure compatibility.
  • Smart tv hanging design: tv brackets attached with tv hang onto wall plate easily, two tube clips lock brackets with tv onto wall plate in safe manner.
  • One-piece long wall plate: fits for solid concrete wall/wood stud spacing of 16"and 24", caution: this tv mount is not for dry wall alone installation! easy centering with this long wall plate, and with paper template for easy installation.

DataComm Electronics 45-0072-WH Commercial Grade Recessed AV/HDMI Cable Conceal Plate 20 Amp Dual Power Receptacle

Datacomm electronics recessed low voltage mid-size plate with 20 amp duplex receptacle is designed to streamline power and cable management behind wall mounted displays for commercial grade applications.

DataComm Electronics 45-0072-WH Commercial Grade Recessed AV/HDMI Cable Conceal Plate 20 Amp Dual Power ReceptacleDataComm-Electronics-45-0072-WH-Commercial-Receptacle

DATACOMM ELECTRONICS 45-0072-WH COMMERCIAL GRADE RECESSED AV/HDMI CABLE CONCEAL PLATE 20 AMP DUAL POWER RECEPTACLE Features
Brand :    datacomm electronics
Color :    White
Size :    duplex
Weight :    1.55 pounds
Model :    45-0072-WH
Quantity :    1
Order click here :    normally ships in 24 hours
  • 20 amp / 125 volt tamper resistant duplex receptacle allows power to be installed behind a wall mounted tv or similar application
  • Conceal multiple av cables behind your wall mounted tv
  • Low profile design fits behind the industry's thinnest mounts and tvs
  • Includes a steel outlet box containing 8 knockouts for conduit and armored cable mounting options
  • Combines power relocation and wire management into one easy to install plate
Price :    $28.00
Speakers :    Best Ce Accessory (Speakers product review) for DataComm Electronics 45-0072-WH Commercial Grade Recessed AV/HDMI Cable Conceal Plate 20 Amp Dual Power Receptacle available ( Jul 2019 )

datacomm electronics 45-0024-wh recessed pro-power kit with duplex receptacle and straight blade inlet Price : 61, was : 64 as 2018-12-19
USUKDEFRESITJPCNCAGlobal
United States
Great Britain
German
France
Spain
Italy
Japan
China
Canada
World Wide
Datacomm Electronics 45 0024 Wh Pro Power Receptacle (Ce Accessory) Reviewed by on puqus.com

Top datacomm electronics 45 0024 wh pro power receptacle (ce accessory) Content

The F.A.Q. for datacomm electronics 45-0024-wh recessed pro-power kit with duplex receptacle and straight blade inlet

Worked great. Very nice install and seems like good quality material used.

A number of questions have been asked here.

Showing 10 Q&A on DataComm-Electronics-45-0024-WH-Pro-Power-Receptacle

(0) Question: Whats the differance between the 45 and 50


(1) Question: I see the top outlet has trouble fitting 12/2 cable, does the bottom piece have the same issue?


(2) Question: Do you have to do the mounts vertically in a straight line? not many wires going up (power, network, cable) can i go thru a stud to better hide box?


(3) Question: Would installation on a slanted wall be difficult?


(4) Question: Does this work in the uk


(5) Question: Does this come with everything needed for installation?


(6) Question: Is this ul rated?



(note) Question: where/how to get Datacomm Electronics (manufacturer's brand) accessories & similiar Datacomm Electronics's products

Click to Show/Hide the Answer
Answer:

Click on the marked text to copy to Clipboard

Went into this knowing i had to purchase the interconnecting wire between the receptacles. Wire recommended on the manual was either 12/2 or 14/2 romex. A 14/2 would be more appropriate as i barely was able to squeeze a stripped 12/2 bare wire into the receptacle. Other than this minor detail, everything works per instructions and i was able to string 3 hdmi, 1 coax and an optical cable through them.


Accessories & Supplies 704182, Audio & Video Accessories 235271, Cables & Interconnects 045271, Electronics 282271Top Datacomm Electronics 45 0024 Wh Pro Power Receptacle (Ce Accessory) FAQ Content

Best datacomm electronics 45 0024 wh pro power receptacle (ce accessory) in review

I have 3 wall mounted tv's . Bought 2 more of this kit so every room now has a clean professional look. Good quality and relatively simple installation. You'll need a few basic skills but most who are handy should have no problem.

. Lewis, North Dakota

You might like to see Full Motion Tv Wall Mount Bracket Articulating Arms 18.8 Extension Perfect Center Design, Fits 17-39 Inches Led, Lcd Tv Max Vesa 200 X 200mm, 60 Lbs Loading, Fits 17-39" Tvs This Mount Fits Most Of 17-39" Tvs Sold Today. It Fits Tvs Mounting Holes, In Tv Terms - Vesa 100x100mm, 200 X 100mm, 200 X 200mm. For Concrete Wall And Single Wood -Mounting Dream Full Motion Tv Wall Mount Bracket Articulating Arms 18.8 Extension Perfect Center Design, Fits 17-39 Inches Led, Lcd Tv Max Vesa 200 X 200mm, 60 Lbs Loading, Md2413-s
  1. Additional: Tv Wall Bracket Makes Viewing More Flexible: +5 /-15 Tilt To Reduce Glare, +/-90 Swivel Side To Side To Position Tv.
  2. Additional: Vesa Plate Can Be Taken Off For Easy Installation, And +/-5 Rotation Allows Post-installation To Perfectly Level Tv.
Low-Priced Mounting Dream Articulating Extension Md2413 S (Ce Accessory) Md2413 S Mounting Dream Articulating Extension Md2413 S (Ce
Or you might like to consider Full motion adjustable tv wall mount rotation, swivel tilt tv arm bracket 15-27 inch led, lcd monitor plasma tvs vesa 75,100 suptek ma2720 is a articulating wall mount for led lcd tv/monitors, makes it easy to view your tv or monitor from different angles.  tilt, swivel, extend function provide smooth -suptek full motion adjustable tv wall mount rotation, swivel tilt tv arm bracket 15-27 inch led, lcd monitor plasma tvs vesa 75,100 ma2720
  • Included: Full Motion - 360 Rotation, 180 Swivel, 15 Tilt, Extended To 14. 96" From The Wall, Meet All Of Your Viewing Angles.
  • Included: Compatibility - Compatible With Vesa 75x75mm And 100x100mm, Fits For Concrete Wall/wood Stud.
Buy Suptek Adjustable Articulating Rotation Ma2720 (Computer Add On) Ma2720 Suptek Adjustable Articulating Rotation Ma2720 (Computer Add

. Joanna, Nebraska says

This was much better than i expected. Looks very clean and professional after installation. Make sure you purchase romex 14/2 wire. . Also had to make the hole a tad bit larger to fit the gang box into the wall. Other than that. It's pretty simple.

J. Campbell, Hounslow

I wish i had found this product when i mounted my other tvs! what a great idea, not only does it place power behind your tv, but there is room to plug two devices in. Once installed, this has a very clean look, a definite welcomed addition to our house. . Make sure you pick up some romex wiring at your local hardware store or here . You will need this in order to connect the two boxes together. . The pass-throughs in the plates for the low voltage cables (like hdmi) are a bit tight for the connectors, it take a moment to get them through. . Great product!

A. Pearson, Louisiana says

Used this to more cleanly install a small flat-screen tv high on a wall. Easy to install. Came with some nice cut-out templates. Made the project look much better than a hanging power cord. Very durable materials.

X. Donna, Somerset

Exactly what i needed. fast shipping

L. Benton, West Virginia says

I used this unit to place a flat screen tv over my fire place. It fit well, and i was able to hide all the cables in the wall. It was a lot of work to run the wires in the wall, but with this unit the work was worth it.

. Irene, Wakefield

This is tricky to review. Its a great product, the issue i had with it is that the actual hole where the wires tuck into is small and i had to cut the plastic which made look not do nice, but its behind the tv soy can't really see it, but i know, i know its there.

I. Noguera, Middlesbrough says

People have commented on how clean our setup looks. This comes with templates that makes installation easy. You will need to supply your own three conductor romex for the electrical.

F. Megan, Niedersachsen

If you buy this, do yourself a favor and read the 3 star review by m. Knutsonon february 23, 2016 before you install. . 2 highlights:. - as everyone says the outlet receptacle is a pos, buy your own to use. . - the top outlet fits perfectly using the template. However, the bottom outlet does not, you will be like wtf it doesn't fit unless you shave the left side at 45 degree angle, then it will barely fit. . One last note in case you are curious the top and bottom are not the same width. The top is about 6" the bottom is about 4".

Z. Theola, Southwark says

I received this product and then realized that i ordered the wrong one. I decided to keep it and use it. The instructions were pretty much straight forward. I didn't like how i had to go out and purchase the wires to connect and supply power to the top box from the lower box. Other kits include the that. The product thought was easy to install. The templets were right on for size although when i put the outlets in the cutouts i had to push them in really hard as it was a very tight fit. I outlets work perfect. Good 4 star purchase.

C. Wade, Missouri

Super easy installation. Good manual, you can't miss it. Very good quality. Note: you will need to buy the electric cable that goes inside the wall. Not included on box.

V. Kellie, Luton says

Easy install, would recommend to anyone who is decently handy and 1) doesn't want to pay a lot of money for professional install or 2) risk life and limb by trying to wire into your home electrical system.

B. Alice, Hampshire says

Very well done, does the job, could do with a bit mroe space for cable, but from what i saw of the alternatives, this is a good option

U. Allen, Norfolk

Just what i needed, but the out let in the lower panel was broken. Contacted batacomm and they sent out a new unit in less than a week.

R. Powell, Nottinghamshire says

Does not come with cable you need to run from outlet behind tv to outlet that comes out at bottom of wall. Need to go to hardware store and grab that

D. Hannah, Saskatchewan

Prepare to make a mess and put holes along the wall. Not for the faint of heart when it comes to diy, especially if you're scared of being in a dark, dank attic for hours on end cutting holes and running wires. If you have an irrational fear of darkness and unfamiliar places, buy this for a pro to install-he/she will thank you for how simple it is.

E. Tracey, City of London says

Great kit for mounting tv on the wall. I knew and planned on needing wire to connect the two boxes, this system is perfect and i feel very good about the wiring in the wall. The best part about this system is the ability to use my panamax line conditioner vs a direct wire system that simply supplies power to the tv.

M. Valencia, Bury

Easy to install, you will need to supply 14/2 rolex cable for inside the wall. Nice quality. Some people mention the access for the low voltage cables was too small- not sure how many cables they ran but i was able to run a heavy duty hdmi cable, a heavy toslink cable, network cable and a covered speaker wire with plenty of room left over. I do wish the templates had crosshairs on the to make sure the were level.

W. Jennifer, Sachsen-Anhalt says

Easy hook up. I did mess up with the bottom face plate ( i put it too close to the left post- didn't read instructions well enough). How ever i took out more drywall from right side of outlet and put it on left side- works well enough for now- i just need to put a hole patch kit over it and i'm solid.

. Betty, Rochdale

Most decently priced wire pass through on the market. I changed out the outlet for an outlet with two recepticals and two usb ports to help with the power needs behind my entertainment center. The provided templates for cutting the drywall helped out a lot and everything went together easily.

O. Joanne, Arkansas says

Very easy to read instructions and installed in about 30 minutes. I have some background in construction though. With the instructions, i do not see why a novice can not do this with out a problem. Tip: use a metal hanger to fish hdmi cables through the holes.

G. Shirley, Rhone-Alpes

I put one of these wherever i install a tv. The best part is it makes getting power to the tv a cinch; no need to be an electrician or snake romex through walls. Simply cut a couple holes, drop in the included wire, hook it up, then plug it in. No turning off circuit breakers or risking getting shocked. Then, just drop your video and audio cables down the wall behind the tv. It's neat, safe and easy. This is a great product and comes with all the parts you'll need. Some products are single ended and require wiring to an existing outlet, so shop carefully if you look elsewhere. This is the full monty and worth the price. Edit: i was a little wrong, it does not come with the piece of electrical wire that runs behind the wall from the top socket to the bottom unit which you hook the supplied extension cord too. So you'll need probably 3-5 feet of 14/2 nm romex. Basically a scrap of wire. Maybe you or a friend has a piece lying around. Some hardware stores and big box stores like home depot sell it for 40-50 cents/foot. I'm sure other places do too. Worst case, if you can't buy it by the foot in your area, order the smallest roll you can for maybe 10 bucks or less. One more thing. I installed this on an outside, non-party wall of my row home. The clearance behind the drywall on that wall is only about 3. 5 inches. This box needs a bit more than 4 inches behind the drywall. Didn't expect the tight clearance, but i was able to modify the unit to fit and still be up to code. Don't recommend doing that unless you are a good diy'er. So checking the clearance behind the wall before you get this and cut the hole would be a good idea. If you have the space, it's a really nice package. None of my other walls is that tight, so i didn't check first. My bad, but that's not the fault of the pro-power kit. I got sloppy.



Top recessed propower kit duplex receptacle Review

Disadvantage and Critical reviews

G. Guest, Bremen says

The product is nice however very important to note that the product description & instruction manual both say that 12/2 or 14/2 wire will work with this product. 12/2 will not fit inside the back-stab holes on the outlet as the wire is too thick for the holes. I now have to drive a half hour to buy 14/2 wire, and struggle with routing the wire through the walls again. Aside from this, the product does seem to be of decent quality and hopefully should work without issue after getting 14/2 wire.

Q. Imelda, Middlesbrough

Not as advertised. Needs to be wired in to electrical wiring of home. Not plug in.

V. Jessica, Massachusetts says

This certainly fills a niche that i wanted, but the outlet seems a bit flaky and the power goes out at times - not sure why. I ended up running a separate extension cord (which defeats the clean look i bought this for), but at least the other wires are hidden.

C. Powell, Rheinland-Pfalz

Did not come with te 6ft cable they said was included.

U. Joanna, Prince Edward Island says

I've installed seven of these over the past few years. This is a great product, if you can ignore the small openings for the a/v cables. This last version i received has an outlet with a screw-in ground and two push-in terminals for the neutral and hot wires. The opening for these push-in terminals is too small for the romex that i've used for the last six of these i've installed. I had to run out and buy an outlet to finish the install. Datacomm's quality control needs some work. I'm starting to get the impression that they now just throw anything into these kits without paying much attention to detail.

T. Colleen, New Hampshire

Works fine, but supplied outlet doesn't work with 12/2 electrical wiring. I went to the hardware store and bought a replacement 15amp outlet. Hides the wires perfectly behind the wall. You'll need a wire fisher if you plan to add any new wires after you mount the fixtures.

A. Hannah, Medway says

This works great for hiding the cables from the tv to the surround sound system. The only issue is that the cord that plugs into the bottom box to feed power has a long end on it and extends across the opening for the cables which limits the room you have. Overall it does the job and is simple to install.

I. Brendon, North East Lincolnshire

Just came in and it doesn't come with an electrical wire to send power from the top box to the bottom box.

K. Ruby, Cambridgeshire says

The product mostly does what is intended to do, and gives you a clean, cable-free, look to your entertainment system. . However, the provided outlet is useless. It has only push-in type connectors (back wiring) and they are too small for 12/2 electrical wire. Fortunately, i had an extra outlet available that had the screw terminals (side wiring) and used that.

Z. Rowe, Ohio

This was a pain in the butt to install. The instructions were not very clear. The hole required by the enclosed stencil was not big enough to fit the bottom portion in the wall due to the outlet box on the back. It's like the manufacturer did not account for the outlet box at all.

S. Noguera, East Riding of Yorkshire says

Horrible. This product does not come with the wire you need to run between the two boxes. The instructions said 12/2 or 14/2 wire is needed. So off to lowe s i go the get the wire. Annoying, but no big whoop. I finally get back to the house to finish installation after fighting holiday traffic and crowds. Back to the instructions, which say to screw the black wire to the brass screw and white wire to the silver screw. The only problem is, no such screws are on the outlet that comes in the package! after much frustration i figure out the wires have to be pushed in on the back of the outlet . And that nice 12/2 wire i just bought? well it doesn t fit. It needs to be 14/2, not 14/2 or 12/2 per the instructions. So i went to lowe s and bought what the instructions said i needed, only to find out i can t use it. . The most frustrating experience ever! now i have to go buy a new outlet or new wire. Day wasted and still no tv. This is not a complicated product to get right. I hope my experience saves you this headache.

R. Ruff, West Berkshire

Not as pictured. Like other reviewers the units i received have different openings for the low-voltage cables. The included instructions are also for a different product. I spent some time making sure there would be adequate clearance from studs prior to choosing hole location. But when the unit was assembled and all cables threaded through both upper and lower units, i discovered that the lower unit would not fit into the hole cutout. Since the wall was finished and painted i had no intention of altering sheetrock, so i took a hacksaw and removed nearly an inch of the low voltage housing. Hardly a clean install! i also agree with other reviewers that the included outlet is very cheap and does not include screw terminals for positive connections. Which leaves very little for a high price. Look elsewhere.

P. Patricia, Virginia says

Did not realize that this product did not come with all of the required parts for install. It should be made clear that there is no romex wiring included. Very disappointing.

E. Arnett, Hackney

The product is very well made and is easy to install. However, it's depth of the product didn't fit in my wall. I had to carve out the back of the sheetrock on the opposing wall. That was a real pain in the neck. If that was an outside wall and was wood and not sheetrock i don't know what i would have done, other than send this product back to the seller. Also the loser box which has the 3 prong male end caused a bit of a struggle too. Since you have to feed the left side in first you need a bit more room (bigger hole) to be able to pivot the unit into the wall. So, cut the hole for the detention that they instruct but know that you will have to carve out just a little more on the sides to pivot the box in. Also, the data ports are very small. If you hdmi cables have ferrite beads on the end you will struggle with getting them through that hole. You can probably fit not more than 2 hdmi cables if they have the ferrite beads on the end. I will be changing over to hdmi cables without the ferrite beads so i can fit 3 cables and the coax and 1/8 audio cable i require. It appears that datacomm's previous model may be a better solution for the data cable management. I like this model's power cord recess design better than datacomm's previous model however. It's both recessed and angled to make sure that it is completely out of the way of the tv wall mount. So, i would recommend this product as long as the cavity in you wall is deep enough and that you have hdmi cables without ferrite beads. Visit monoprice. Com for good price on hdmi cables.

F. Anonymous, Alsace says

Not quite like in the picture. I'm half way through the install, and will update when i'm done. First off, neither the input or output plates have the buttons or the "flexible screen" described in the pictures and the text. The box the product arrived in, and the manual, both show this in the illustrations and text, but it's just not there. It makes reference to being able to remove the "flexible plates" if you have 4 or more lv cables, but there is nothing to remove. Perhaps not the most important feature, but it's still irritating that something that was mentioned prominently as a feature has been removed. . An installation tip. While the templates are dead on in size, the angle at which the electrical enclosures projects from the face plate does not allow for 1/2" drywall, the space is too narrow between it and where the faceplate sits on the wall. You can either make the hole bigger or use your drywall saw/knife to bevel the inside edge of they drywall where that box meets the faceplate. The assembled unit inserts easily if you do that. . As others have reported, the included decora style duplex socket will not allow for 12 ga. Conductors.

D. Guest, South Australia

It's a bit of a pain to get the sides of the boxes into the wall once it is assembled with electrical. Just have to take a deep breath, shave some more sheetrock of the sides and it will slide in. Don't forget to add indoor romex 12/2 wire for the electrical.

H. Meyer, Rhone-Alpes says

Received this product and it seems like an ok kit. You might as well get a 2$ leviton outlet with it as the outlet is junk. Unfortunately it will not work with walls that have multiple layers of drywall like condos or apartments which i found out after cutting into the wall and trying to make it fit. I'm sure it will work for most people, but super bummed it didn't work out for me.



Leave a Reply

You must be logged in to post a comment.


Back to Top

Related Products

  • Most Wanted
    Bafx Products Ir Repeater - Remote Control Extender Kit (54 5exn symf)

    Bafx Products Ir Repeater – Remote Control Extender Kit (54 5exn symf) 551

    Bestsellers Bafx Products Ir Repeater - Remote Control Extender Kit (54 5exn symf), Ir Repeater - Remote Control Extender Newly Improved Ir Receiver For Better Compatibility And Ease Of Use! Same Great Product! Want To Place Your Cable Box Or Other Devices In A Cabinet Or Other Room And Still Be Able -Bafx Products Ir Repeater - Remote Control Extender Kit
    1. Great product. Well built and easy to install. I love how the ir receiver lights up when it detects an input from your remote. Very pleased! https://puqus.com/bafx-products-ir-repeater-extender-55109zgk6qs/#bafx-products-ir-repeater-extender
    2. Bonus: Control Your Ir Remote Controlled Devices That Are Hidden Behind Doors Or In Other Rooms Where They Can't Normally Be Reached By The Remote Control.
    3. Bonus: New, Smaller Foot Print & Black In Color To Better Blend In With Your Setup!.
    Half Price Bafx Products Ir Repeater - Remote Control Extender Kit (Networking Device) 54 5exn Symf
  • Add to Basket
    Fire Hd 8 Tablet Alexa, 8 Hd Display, 32 Gb, Marine Blue - Special Offers (53 005683)

    Fire Hd 8 Tablet Alexa, 8 Hd Display, 32 Gb, Marine Blue – Special Offers (53 005683) 1556

    See Reviews Fire Hd 8 Tablet Alexa, 8 Hd Display, 32 Gb, Marine Blue - Special Offers (53 005683), Fire Hd 8 Tablet Alexa, 8 Hd Display, 32 Gb, - Special The All-new Fire Hd 8 Is The Next Generation Of Our Best-reviewed Fire Tablet Ever- Up To 12 Hours Of Battery Life, A Vibrant 8" Hd Display, And Dolby Audio-made For All Day Entertainment. -Fire Hd 8 Tablet Alexa, 8 Hd Display, 32 Gb, Marine Blue - Special Offers
    1. Supplementary: 16 Or 32 Gb Of Internal Storage And A Microsd Slot For Up To 256 Gb Of Expandable Storage.
    2. Supplementary: Now With Alexa, For Quick Access To The Information And Entertainment You Want. Ask Questions, Play Music, Check Your Calendar, Get The News, Weather, And More - Just Press The Home Button And Ask.
    3. So happy with my new fire and i wish i had bought more! some of the pros of this tablet are it has alexa, memory expansion slot, and a nice size. At 8 inches it is the perfect size to take on the go and ebook . It is a little thicker than some of the more expensive tablets on the market but because ... go to https://puqus.com/fire-tablet-alexa-display-marine-15561j94t1z2/#fire-tablet-alexa-display-marine
    Modest Fire Hd 8 Tablet Alexa, 8 Hd Display, 32 Gb, Marine Blue - Special Offers (Tablet) Sx034qt
  • Today's Deal
    Ztotop All New Tablet Release Generation (ztpfires10 001)

    Ztotop All New Tablet Release Generation (ztpfires10 001) 280

    On Sale Ztotop All New Tablet Release Generation (ztpfires10 001), Folio Case All-new Fire Hd 10 Tablet 2017 Release, 7th Generation - Smart Cover Slim Folding Stand Case Auto Wake / Sleep All-new Fire Hd 10 Ztotop Team Pay Most Attention On Customer Service And Product Quality. If You Have Any Issue Our Cases At Any Time, Please Always Contact Us. We Will Strive To Fix The Issue To Your -Ztotop Folio Case All-new Fire Hd 10 Tablet 2017 Release, 7th Generation - Smart Cover Slim Folding Stand Case Auto Wake / Sleep All-new Fire Hd 10 Tablet,black
    1. Attribute: Lightweight And Protective. Built From Durable Pu (synthetic) Leather With Soft Microfiber Interior To Protect Your Screen And Keep It Clean. Designed With A Smart Holder For Stylus/pen (stylus Not Included).
    2. A perfect additional for the fire hd 10 tablet. It is nice that it will convert to a holder that will let the tablet sit up. https://puqus.com/ztotop-all-new-tablet-release-generation-28075tzqft9/#ztotop-all-new-tablet-release-generation
    3. Attribute: Full-cover Case With Magnetic Closure Keeps The Cover Securely Shut With Easy Access To Buttons, Ports, And Cameras.
    Sale Ztotop All New Tablet Release Generation (Tablet Accessory) Ztpfires10 001
  • puqus.com
    Zvox Aluminum Accuvoice Dialogue Subwoofer (Zvox Audio)

    Zvox Aluminum Accuvoice Dialogue Subwoofer (Zvox Audio) 2053

    Purchase Now Zvox Aluminum Accuvoice Dialogue Subwoofer (Zvox Audio), Zvox Sb380 Aluminum Sound Bar Tv Speaker Accuvoice Dialogue Boost, Built-in Subwoofer - 30-day Home If You Want Clear Voice Reproduction, But You Don't Need "home Theater Sound. " -Zvox Sb380 Aluminum Sound Bar Tv Speaker Accuvoice Dialogue Boost, Built-in Subwoofer - 30-day Home Trial
    1. Extras: Aluminum Sound Bar.
    2. Fantastic product. I couldn't be happier. Certainly one of the very best consumer electronic products i have ever purchased. Replaces a vizio sound bar and the difference is night and day. Like many people, i was looking for greater clarity in speech, especially in movies, and this sound bar really ... go to https://puqus.com/zvox-aluminum-accuvoice-dialogue-subwoofer-2053744n8tnq/#zvox-aluminum-accuvoice-dialogue-subwoofer
    Shopping Zvox Aluminum Accuvoice Dialogue Subwoofer (Speakers) 330

Product Image Gallery

Top-datacomm-electronics-45-0024-wh-pro-power-receptacle-21650b7c06p4-Content