Ir Repeater System – Hidden Ir Control System Home Theater (400020) 1417

Review for ir repeater system hidden ir control

Price was $21.95. Easy to connect, comes with 2 sets emitters, poor instructions on using shielded or cat5 cable for extensions

-M. Lorenz

Ir repeater system – hidden ir control system home the compact all-in-one ir system makes sure that all of your a/v components receive the commands sent from your existing ir remote controls, even out line-of-sight access. a small -ir repeater system – hidden ir control system home theater

  • Included: Included With The System Is – Ir Receiver ( 2 Inches By 1/2 Inch ) ( 10ft Cable ).
  • Included: Hidden Ir Repeater Controler ( 3 1/2 Inches By 2 Inches ).

Discounted Ir Repeater System – Hidden Ir Control System Home Theater (Remote Control) 1183 1 N

Buy Now


Prologue

I purchased a flat screen tv for our bedroom and wanted to eliminate all the cables and the satellite box. Which the newer version of the hd directv receiver has relatively bright blue leds. That can be bothersome when you are done watching tv and want to sleep. My wife and i did not want a cabinet in the bedroom for the tv and satellite receiver. With relative ease i was able to put the receiver in a bedroom closet and run the cabling thru the wall. Including the ir repeater wires. All behind the flat screen tv. A small led receiver, 1/2 inch by 1 inch, is barely visible and the only thing in the bedroom is the flat screen, thin (1. 2") samsung led wall mounted. Looks great, as all you see now is the tv no distraction of the cables running out from behind the tv, etc. You know the pictutre. The satelliet receive has never been more responsive and there are no more annoyning led lights form the satellite receiver lighting up the bedroom. Great product for a decent price. The instructions for setup seemed vague but i just hooked it up as diagrammed and everything worked immediately! there were also options for various more complex installation that would be useful for the primary entertainment center in your home where you have more devices to extend the ir remtoe control signal too. This unit comes with four (4) led emmitters to control four (4) devices but has expansion ports for up to six (6) devices total. The Best ir repeater system hidden ir control ( Jul 2019 ) | Cables Direct Online-Remote Control Review Included IR Repeater System - Hidden IR Control System for Home Theater Ir repeater system allows you to control home theater components located behind cabinet doors. Included with the system is - ir receiver ( 2 inches by 1/2 inch ) ( 10ft cable ). Hidden ir repeater controler ( 3 1/2 inches by 2 inches ). 2 dual ir emitters ( 10ft cable ). Power supply (6ft cable ) and instructions .

Ir Repeater System - Hidden Ir Control System For Home Theater Review (400020)

We bought an additional cable to extend even further. We watch upstairs, but run the system from the basement. Works great. -D. Elida

Ir Repeater System Control Theater

  1. Class: Electronics
  2. Brand: Cables Direct Online
  3. EAN: 0856498006082
  4. Product Dimensions:
    Height:4.25 inches
    Length:7.00 inches
    Width:2.25 inches
  5. Manufacturer: Cables Direct Online
  6. Model: Amazon 1183-1-N
  7. MPN: 400020
  8. Quantity: 1
  9. Part/Serial Number: 400020
  10. Type: CE
  11. Category: REMOTE CONTROL
  12. UPC: 033170227915

ir repeater system - hidden ir control system home Ce, The compact all-in-one ir system makes sure that all of your a/v components receive the commands sent from your existing ir remote controls, even without line-of-sight access. a small receiver can be placed near your television or mounted somewhere around your equipment cabinet, and this system will deliver your commands to up to 12 individual home theater components. it's easy - this home theater accessory is so easy to use; it sets up in minutes and requires no drilling or rewiring. your friends will think you had a pro install it! Ir Repeater System - Hidden Ir Control System Home Theater (Amazon 1183-1-N-Cables Direct Online).

Ir Repeater System Control Theater Ce

PROS
  • Worked fined. I had to replace the same though and it wss less than 1 year old.
  • Smaller than my last, but that is ok - easier to place in small space. It seems to work just fine.
CONS
  • Did not work with samsung cable tv boxes, did work with other samsung receivers and blue ray players. I did reach out to there support for help, but all i got what was posted on there shopping site, they quoted me there info. Really thats your help. So i had bought another ir repeater system at the same time, it was a sewell infrared ir remote control repeater wall plate kit emitter and receiver and it work great, no issues what ever. Ordered 3 more today, will be putting this in my clients house from now on.
  • I bought this to control 3 devices, unfortunaly 2 of the 3 it does not work for. Yamaha rx-v375 works fine. Directv genie model: hr44-500 does not work. (yes i understand the rf technology in this device, and have ir enabled. ). Monoprice 4x2 true matrix hdmi switch/splitter model: 107112 does not work. (this device uses basic ir frequency and was easily programmed into my universal remote. ). . From what i've read all i can think, is you may need a dual frequency receiver. Will update my post if that works.
  • Have to angle the remote a few times before i get it to work, not as ideal as i thought it would be.

ir repeater system hidden ir control IR Repeater System - Hidden IR Control System for Home Theater (Switch to Mobile/Desktop Version)

Took a chance on this because of the price. Installed it and so far it's been working great. It comes with a power supply, reapeater main unit, 1 ir receiver, 2 double headed ir emitters for a total of 4 ir emitters. The only possible issue i noticed so far is with the ir receiver, but this depends on the person. When the ir receiver receives commands from your remote it flashes a blue led light. For some this is a great feature because you can instantly tell if it's actually receiving or not. For others they will be annoyed with the light, but that can be easily solved with a piece of black electrical tape.

Ir Repeater System - Hidden Ir Control System Home Theater
Click to see NoticeIr Repeater System - Hidden Ir Control System Home Theater (400020)"These things are awesome i have installed several over the years and they are all still working. They hold up to dam basements hot attics and grim. One out lasted my last receiver."

(0) Question: What do i transmit with?


(1) Question: Do i need a separate remote? i am putting the comcast box and dvd in next room, will this work?


(2) Question: How far down the dual emitters' wires can the two leads be separated?



Analog-to-Digital (DTV) Converters » AV Receivers & Amplifiers » Blu-ray Players & Recorders » DVD Players & Recorders » DVD-VCR Combos » HD DVD Players » Home Theater Systems » Projection Screens » Projectors » Satellite Television » Streaming Media Players » Television Accessories » Televisions » TV-DVD Combos » VCRs » Video Glasses » Ir Repeater System - Hidden Ir Control System Home Theater (Remote Control) 1183 1 N


Xantech 784-00 Emitter IR Sensor Extension Cable, 50'

A 50 foot male to female cable for extending ir emitters and ir sensors. This three-conductor cable has 1/8" male and female plugs molded onto a high quality cable.

Xantech 784-00 Emitter IR Sensor Extension Cable, 50'Xantech-784-00-Emitter-Sensor-Extension

XANTECH 784-00 EMITTER IR SENSOR EXTENSION CABLE, 50' Overview
Brand :    xantech
Size :    50 Feet
Weight :    1.00 pounds
  • Use for ir sensors or ir emitters
  • 1/8" male and female fittings molded onto the cable
  • 50 feet of high quality cable
Price :    $24.95
Model :    784-00
Quantity :    1
Order click here :    normally ships in 1-2 business days
Home Improvement :    Best Home Lighting Accessory (xantech product review) for Xantech 784-00 Emitter IR Sensor Extension Cable, 50' available ( Jul 2019 )

LINESO 2Pack Stereo RCA To Stereo RCA Audio Extender Over Cat5 2x RCA TO RJ45 Female

Features: set of 2 audio baluns - 1 receiver and 1 transmitter maximum of 240 ft cable length for analog stereo audio adaptor length: 8inch plug and play these audio extender's are used and sold in pair. These are perfect and provide a ow cost-effective solution for extending audio signal for long distance. Great for installers but easy enough for any home owner. Installation - it is simple. Just plug in the cable to each adapter. Plug them into your devices and then - that's it your done. Specifications - audio connectors: 3. 5mm stereo to rca x 2 rj45 connectors: 2 ( 1 for transmitter and 1 for receiver unit) max transmission distance: 250 feet bandwidth: 10 hz to 50 khz +/-3 db operating temperature: -10c +50c environment humidity: 0 95% wire type: utp category 5, 5e, or 6 operating temperature: -10Â c to 70Â c . Each package 2x cat5 to rca red and white cable

LINESO 2Pack Stereo RCA To Stereo RCA Audio Extender Over Cat5 2x RCA TO RJ45 FemaleLINESO-2Pack-Stereo-Extender-Female

LINESO 2PACK STEREO RCA TO STEREO RCA AUDIO EXTENDER OVER CAT5 2X RCA TO RJ45 FEMALE Pros
Brand :    lineso
Color :    2x RCA TO RJ45 Female
Weight :    0.1 pounds
  • Easy installation - plug and play
  • Bi-directional so each end can either transmit or receive maximum of 240 ft cable length
  • Set of 2 audio baluns - 1 receiver and 1 transmitter
  • For analog stereo audio - standard red white connectors
  • Lineso stereo rca to stereo rca audio extender over cat5/6
Price :    $10.50 (was $20.00)
Model :    4330090622
Quantity :    1
Order click here :    normally ships in 24 hours
Ce :    Best Cable Or Adapter (lineso product review) for LINESO 2Pack Stereo RCA To Stereo RCA Audio Extender Over Cat5 2x RCA TO RJ45 Female available ( Jul 2019 )

Aketek IR Hidden Infrared Remote Extender Receiver Emitter Repeater System

(us plug)5v usb ac power adapter operating range:30-60khz input:50-60hz, ac 100-240v one head line with 1 receiver and 1 emitte package included: 1 x cable (receiver and emitter), 1 x power adapter.

Aketek IR Hidden Infrared Remote Extender Receiver Emitter Repeater SystemAketek-Infrared-Extender-Receiver-Repeater

AKETEK IR HIDDEN INFRARED REMOTE EXTENDER RECEIVER EMITTER REPEATER SYSTEM Advantage
Brand :    aketek
Color :    black
Size :    free
Weight :    0.55 pounds
Model :    FBA_231
Quantity :    1
Order click here :    -
  • Package included: 1 x cable (receiver and emitter), 1 x power adapter.
  • One head line with 1 receiver and 1 emitte
  • Input:50-60hz, ac 100-240v
  • Operating range:30-60khz
  • (us plug)5v usb ac power adapter
Price :    —
Ce :    Best Remote Control (aketek product review) for Aketek IR Hidden Infrared Remote Extender Receiver Emitter Repeater System available ( Jul 2019 )

TNP IR Repeater Extender Infrared Remote Control Hidden System Kit - Infrared IR Emitter Blaster Distribution Extension & Receiver Cable Cable Box Home Theater AV Component Equipment HDTV

The remote control blaster repeater kit contains all equipment necessary to remotely operate 4 components (expandable to 12 components) using your standard remote control. Mount the ir receiver in a central location and connect to the ir distribution block. This block repeats the signals through ir blaster emitter cables to your electronic components. Your components may now be mounted in your entertainment center system cabinet, closet or another room! an ideal solution for those who want to hide conceal their a/v components equipment such as av receiver, dvd blu-ray player, and satellite receiver set top box stb etc, etc. Inside a entertainment system cabinet or closet, with no direct line-of-sight needed, for a clean, stylish look the kit is self-contained and easy to connect. With this kit you may mount a receiver in a convenient place on or near your entertainment system. The receiver has a 9 foot cable that is then attached to the repeater system that is mounted in your entertainment cabinet. The kit includes 4 ir blaster emitter. These emitters are connected from the repeater system and placed over the ir receiver of the equipment. Simple installation and hook up while using your existing remotes. Specification:power supply: 12vdc, 200mair connecting dimensions: 82 w x 60 h x27 d mmir receiving: 1 ft - 40 ftoperating frequency: 38 khz and 56 khzconnector type: 1/8" (3. 5mm) mini plugir receiver dimensions: 68 (w) x 13 (h) x 11. 5 (d) mmdual ir emitters dimensions: 14 (w) x 6 (h) x 8 (d) mmpackage content:1x ir distribution block2x dual ir eye emitter blaster cable (10ft)1x dual frequency ir receiver cable (10ft)2x mounting screw1x ac power adapter1x instruction manual

TNP IR Repeater Extender Infrared Remote Control Hidden System Kit - Infrared IR Emitter Blaster Distribution Extension & Receiver Cable Cable Box Home Theater AV Component Equipment HDTVTNP-Repeater-Extender-Infrared-Control

TNP IR REPEATER EXTENDER INFRARED REMOTE CONTROL HIDDEN SYSTEM KIT - INFRARED IR EMITTER BLASTER DISTRIBUTION EXTENSION & RECEIVER CABLE CABLE BOX HOME THEATER AV COMPONENT EQUIPMENT HDTV Advantages
Brand :    tnp products
Weight :    0.71 pounds
Model :    A-1204A_EU
Quantity :    1
Order click here :    normally ships in 24 hours
  • An ideal solution for those who want to conceal their a/v components equipment inside a entertainment system cabinet or closet for a clean, stylish look
  • Convenient ir confirmation led with dual frequency to support infrared signals from a wider range of ir remote control such as cable box setup box stb; support up to six emitter output connections
  • Additional ir emitter blaster available for purchase at : b017lqakxw; if you need to extend the ir blaster emitter cable, you can use a 3. 5mm stereo audio extension cable and a 2. 5mm to 3. 5mm adapter at one end and a 3. 5mm to 2. 5mm adapter at the other end
  • Included with the system is - ir receiver (2 inches by 1/2 inch); hidden ir repeater controller (3 1/2 inches by 2 inches); 2 dual ir emitters blaster
  • Ir repeater system allows you to control home theater components located behind cabinet doors
Price :    $27.95
Speakers :    Best Remote Control (tnp products product review) for TNP IR Repeater Extender Infrared Remote Control Hidden System Kit - Infrared IR Emitter Blaster Distribution Extension & Receiver Cable Cable Box Home Theater AV Component Equipment HDTV available ( Jul 2019 )

J-Tech Digital HDMI Extender By Single Cat 5E/6/7 Full Hd 1080P With Deep Color, EDID Copy, Dolby Digital/DTS, CEC Pass Through

J-tech digital is focused on providing high-quality products that integrate and distribute home entertainment for the residential and commercial markets. J-tech digital has played a major role in transforming whole-house audio, video and home theater. J-tech digital proudly introduces this latest generation hdmi extender by single cat 5e, 6, 7 cable. Instead of using expensive hdmi cables, this device lets you use your existing cat5e, 6 cables, sockets while also performing the same functions like transferring deep color video and new lossless compressed audio. These devices apply in home decorating, project show, tv education environment which need the hdmi signal transfer via cover-up or need transmit for long distance. Use flexible cat5e or cat6 or the latest cat7 to make runs through walls and crimp custom lengths features: support 65ft hdmi 1. 3 cable at the tx input, and 65ft cable at the rx output. Support up to 200ft of cat5e, 6, 7 between the tx and rx unit; . Resolution supported: 480i 60hz, 480p 60hz, 576i 50hz, 576p 50hz, 720p 50, 60hz, 1080i 50, 60hz, 1080p 50, 60hz network cable: low resistance and consumption oxygen-free copper core cat6 cat6a cat7 hdmi signal: compatible hdcp1. 2/1. 4 supports audio format input: dts-hd, dolby true hd, lpcm7. 1 , dts , dolby-ac3 , dsd

J-Tech Digital HDMI Extender By Single Cat 5E/6/7 Full Hd 1080P With Deep Color, EDID Copy, Dolby Digital/DTS, CEC Pass ThroughJ-Tech-Digital-Extender-Single-Through

J-TECH DIGITAL HDMI EXTENDER BY SINGLE CAT 5E/6/7 FULL HD 1080P WITH DEEP COLOR, EDID COPY, DOLBY DIGITAL/DTS, CEC PASS THROUGH Benefit
Price :    $45.00 (was $54.99)
  • Support up to 200ft between the tx and rx unit; for better picture quality and longer distance transfer, we recommend to use cat 6 or cat 7 cable.
  • Support video color: 36bit(cat7); 24bit(cat6); supports 2-channel pcm audio only. supports dolby digital / dts pass through if copied edid from right display devices. supports unidirectional cec pass through(only from source to display)
  • Hdcp 1. 2/1. 4; 1080p/1080i/720p/576p/576i/480p/480i; support 3d video
  • For better performance, we suggest use j-tech digital customized 150ft cat6 cable. we guarantee that it will work with this extender. please search the number "b01ipyvt3y" on to find more detail.
  • Support hdmi1. 3v & 1. 2 signal (10. 2gbps/deep color 36bit/xv-ycc/1080p24fs/dts-hd) for 200ft transmit via cat5e/6/7 lan cable. zero video latency.
Brand :    j-tech digital
Color :    Black
Size :    Single Cable
Weight :    0.56 pounds
Model :    JTDHDEX-1
Quantity :    1
Order click here :    normally ships in 24 hours
Speakers :    Best Cable Or Adapter (j-tech digital product review) for J-Tech Digital HDMI Extender By Single Cat 5E/6/7 Full Hd 1080P With Deep Color, EDID Copy, Dolby Digital/DTS, CEC Pass Through available ( Jul 2019 )

C&E CNE03722 Stereo Headphone Extension Cable 50 Feet 3.5mm

Overview: the c&e 3. 5mm stereo audio cable is ideal for extending the audio connection on ipods, iphones, media players via the aux input (3. 5mm jack). Soft pvc jacket, poled metal connectors, and strain-relief rings increase flexibility and durability. Gold-plated connectors, bare copper conductors, and braided shielding combine together to deliver exceptional audio quality. Beveled step-down design provides a secure connection even with a smartphone in a case. 3. 5mm stereo audio cable and its use specifically designed to take advantage of the convenient 3. 5mm input jack (aux input) on your car's audio system. Key features two 1/8" (3. 5mm) plugs shielded with strain relief provide the best quality connection forall your music unlike fm adaptors or cassettes slenderdesign to provide a seamless experience while driving or at home 100% bare copper conductor, no copper clad steel (ccs) device compatibility iphone 6g(s), 5g(s), 4g(s), 3g(s), 2g, all ipods, ipad 2 and original ipad all mp3 players, cdplayers, laptops, tablets and other music devices with a 3. 5mm audio socket all android smartphones - htc, all droids, samsung all blackberry smartphones cables & etc, llc is the owner of the trademark c&e. This upc is trademarked under c&e. Any violation will be reported to online store without any prior warning.

C&E CNE03722 Stereo Headphone Extension Cable 50 Feet 3.5mmCNE03722-Stereo-Headphone-Extension-Cable

C&E CNE03722 STEREO HEADPHONE EXTENSION CABLE 50 FEET 3.5MM Review
Price :    $5.94
  • The cable's flexible jacket is perfect for tight spaces. it does not affect to charge your device with the chargrging cable.
  • The combination of gold-plated connector tips, bare copper conductors, and braided shielding provides superior cable performance and lossless audio transmission
  • Compatible with iphone, ipod, ipod touch, android and other smartphones, mp3 cases or any player with a 3. 5mm audio jack
  • Premium 3. 5mm stereo audio extension cable engineered with soft pvc jacket, polished metal connectors, and strain-relief rings increases flexibility and durability
  • Allows consistent signal between components using high-quality copper
Brand :    c&e
Color :    Black
Size :    50 Feet
Weight :    0.1 pounds
Model :    CNE03722
Quantity :    1
Order click here :    normally ships in 24 hours
Speakers :    Best Cable Or Adapter (c&e product review) for C&E CNE03722 Stereo Headphone Extension Cable 50 Feet 3.5mm available ( Jul 2019 )

Inteset IR Remote Control Repeater-Extender-Emitter to Control up to 8 Hidden A/V Devices like Cable Boxes, Xbox One, Roku, Apple TV, Nvidia Shield others our Powerful IR Receiver

Great product, jim in customer service was helpful !

With a remote, this ir repeater allows you to place your av receiver, cable box, dvr or other devices in a cabinet or in another room and still be able to control them from in front of your tv. Simply place the ir receiver where you wish to aim your remote control (usually the tv), run the ir receiver wire from your tv to the distribution box. Then run the ir emitters to the devices you wish to control and place an emitter over the ir receiver window in each device, plug the 12v dc plug into a wall outlet and your all set! . Just attach the usb cable from the distribution unit to any working usb connector on any of your devices. The dual band ir receiver can receive commands from 38 khz to 56 khz. The kit includes: 1 distribution unit 1 ir receiver 1 12v dc power plug 4 dual ir emitters to control up to 8 devices (you can add 2 more dual ir emitters to control 12 devices) 1 user manual specifications: the ir receiver cord is 5' long and can be extended with a 3. 5mm av extension cable by up to 50 feet or more the distribution unit measures approximately 2. 25"x 4. 5"x 1" and has slots for mounting, if desired (mounting screws not included) the distribution unit can also be powered by a usb cable instead of the 12v adapter. Usb cable is not included. Note: do not use both the 12v adapter and the usb cable to power the unit at the same time the kit contains 4 dual ir emitters to control up to 8 devices and has connections for 2 more dual ir emitters. Also, see our new cat5 ir receiver extender. This unit does not work with at&t uverse boxes. Plasma tv's emit ir frequencies that can interfere with the ir receiver of this device (not applicable to lcd or led tv's). This can be fixed by placing the ir receiver further away from the tv. Contact us at http://universalremotes. Net/.

Inteset IR Remote Control Repeater-Extender-Emitter to Control up to 8 Hidden A/V Devices like Cable Boxes, Xbox One, Roku, Apple TV, Nvidia Shield others our Powerful IR ReceiverInteset-Control-Repeater-Extender-Emitter-Powerful-Receiver

Inteset Control Repeater Extender Emitter Powerful Receiver (int ir3856em) FAQ.

This is fantastic. I have always hated seeing all the different electronics hooked to my tv. I was not sure if this would work but it does and only took about 10 minutes to set it all up and no programming was needed. I attached the receiver to the bottom of my big screen and have my cable box, dvd, and hdmi switcher with the game systems all in one cabinet behind wooden doors. I use my existing remotes point it at the tv and select what i want to do. It is easier then when i had to keep the doors open as all i have to do is point at one location. I have a 110v power strip for all my devices and that is where it gets its power. I was able to separate the paired transmitters and have a total of six in use. Each transmitter is attached to a device over the ir receiver. Very easy to set up and easy to use -Notice from G. April, New York

Click to Show inteset control repeater extender emitter powerful receiver (int ir3856em) Details

I ordered this to allow the use of my remotes to control the av receiver from my shop and also to allow the equipment to be stored in a cabinet. This ir repeater comes with 4 ir buttons to control the av equipment in my cabinet. A yamaha av receiver, a frontier fios dvr/stb and a samsung bluray player. . The repeater comes with 1 ir receiver button with a 6' cable, since my application needed two ir receivers, one for the shop and one for the outside of the cabinet, i contacted inteset technologies through online store and they quickly responded and helped me get another ir receiver for the shop. I added my own 12' extension cable and with everything all connected and powered up, i can now control everything from either location with ease. No issue with dropped ir signals in the shop at all and i get about' 20'+ of range to the ir receiver button in the shop. Very nice to be control the volume on the system while i am working depending on the task at hand or even just to mute/unmute if i have to take a call. I have been using this for about a month now with no issues. They provided great support when i contacted them and i heartily recommend this product.

Inteset-control-repeater-extender-emitter-powerful-receiver-(int-ir3856em) set picture

- C. AngelicaIt worked perfectly and easy to install.

Ditto all the other comments. We have a short distance between the ir receiver and the "eye" which made it very easy to install. It works faster than the old direct control and we don't have to leave the cabinet open anymore. Wish i had bought this years ago.

Y. Patton, New Hampshire

INTESET IR REMOTE CONTROL REPEATER-EXTENDER-EMITTER TO CONTROL UP TO 8 HIDDEN A/V DEVICES LIKE CABLE BOXES, XBOX ONE, ROKU, APPLE TV, NVIDIA SHIELD OTHERS OUR POWERFUL IR RECEIVER Features
Price :    $22.95
  • Fast us company and support. no delay by overseas accent or personnel. works great with our int-422 universal remote. one year warranty.
  • Either the 12v adapter or the usb cable (not included) can be used to power the unit.
  • Powerful dual band ir receiver handles signals from 38-56 khz which covers nearly all a/v devices. does not work with: cisco rng150 & rng250 & marantz devices.
  • Tested to work with xbox one, roku, apple tv, nvidia shield and nvidia shield pro, kodi and other streamers as well as most a/v devices.
  • Kit includes: 1-distribution unit; 1-ir receiver (5' cable); 1-12v dc power plug; 1-usb cable; 4-dual ir emitters (10' cable) for 8 devices and a user manual
Brand :    inteset
Weight :    0.50 pounds
Model :    INT-IR3856EM
Quantity :    1
Order click here :    normally ships in 24 hours
Ce :    Best Remote Control (inteset product review) for Inteset IR Remote Control Repeater-Extender-Emitter to Control up to 8 Hidden A/V Devices like Cable Boxes, Xbox One, Roku, Apple TV, Nvidia Shield others our Powerful IR Receiver available ( Jul 2019 )

LINESO 3.5mm Stereo To RCA Red White Audio Balun Extender Over Cat5

Our bi-directional 3. 5mm to rca stereo audio to cat 5/6 balun (tx/rx pair) / or stereo audio to 3. 5mm cat 5/6 balun (tx/rx pair). These go either way. Stereo to 3. 5mm or 3. 5mm to stereo ( red / white jacks) 3. 5mm is commonly found on headphone jacks on cell phones, computers or mp3 players. Stereo is commonly found on most stereo products and are easily identified as the red white jacks on stereos and other audio products. Easily convert your stereo audio signal for connection to utp network cable with these handy baluns. Ideal for making long audio run with pre-made patch lead or for feeding audio signals through existing point to point utp cables in buildings. Capable of carrying audio signals up to 240ft, the balun fly lead connects directly from the input or output socket of your audio system to the rj45 termination of a utp cable. Features: set of 2 audio baluns - 1 receiver and 1 transmitter . Maximum of 240 ft cable length for analog stereo audio adaptor length: 8inch plug and play these audio extender's are used and sold in pair. These are perfect and provide a low cost-effective solution for extending audio signal for long distance. Great for installers but easy enough for any home owner. Installation - it is simple. Just plug in the cable to each adapter. Plug them into your devices and then - that's it your done. Specifications - audio connectors: 3. 5mm stereo mini x 1 + rca x 2 rj45 connectors: 2 ( 1 for transmitter and 1 for receiver unit) max transmission distance: 250 feet bandwidth: 10 hz to 50 khz +/-3 db operating temperature: -10c +50c environment humidity: 0 95% wire type: utp category 5, 5e, or 6 operating temperature: -10Â c to 70Â c . Each package 1x cat5/6 to dc3. 5 cable 1x cat5/6 to rca red and white cable

LINESO 3.5mm Stereo To RCA Red White Audio Balun Extender Over Cat5LINESO-3-5mm-Stereo-White-Extender

LINESO 3.5MM STEREO TO RCA RED WHITE AUDIO BALUN EXTENDER OVER CAT5 Pros
Brand :    lineso
Weight :    1.00 pounds
  • Lineso 3. 5mm stereo to rca red white audio balun extender over cat5/cat6 . set of 2 audio baluns - 1 receiver and 1 transmitter
  • Installation - it is simple. just plug in the cable to each adapter. plug them into your devices and then - that's it your done.
  • Maximum distance of 240 ft cat5/6 cable length
  • Audio connectors: 3. 5 mm stereo mini x 1 + rca x 2
  • Bi-directional so each end can either transmit or receive
Price :    $10.50 (was $20.00)
Model :    4330090642
Quantity :    1
Order click here :    normally ships in 24 hours
Speakers :    Best Cable Or Adapter (lineso product review) for LINESO 3.5mm Stereo To RCA Red White Audio Balun Extender Over Cat5 available ( Jul 2019 )

BAFX Products IR Repeater - Remote control extender Kit

I'm used to using the snap a/v units from work (a/v integration company), but this was cheaper than our cost on those units. I extended this unit from my media rack to my 3 tv's after purchasing 2 additional i. R. Eyes, and extended them using bafx's cat-5 extender kit. This added about $42 to the cost of a $27 unit, but i could have saved half of the extra cost by cutting the i. R. Eyes' cables to extend over cat-5 with dolphin connectors. I prefer the cleaner look. I only have a blu-ray player and denon reciever on this repeater, both working as expected. Only notable thing is to know that if the (presumably intentionally very bright) blue light is constantly illuminated on the main unit it means there is an input fault, in my case one of the wire pairs on my cat-5 extension cable were shorting. I had to replace an rj-45 tip at one tv to regain functionality. . Included is a photo of the main unit (only 2 of my inputs installed, 1 output) and one of the ir repeaters on a blu-ray player over the ir reciever.

Newly improved ir receiver for better compatibility and ease of use! same great product! want to place your cable box or other devices in a cabinet or other room and still be able to control them from in front of your tv? this bafx products ir repeater (remote control extender) allows you to do just that! simply place the ir receiver from the repeater kit where you wish to aim your remote control, run the ir receiver wire from the kit to the distribution block. Now run the ir emitters from the kit to the devices you wish to control and place them over the devices ir receivers, plug the kit into a wall outlet and your all set! the kit includes: 1 distribution block 1 ir receiver 1 power plug 4 dual ir emitters (control up to 8 devices) manual link to a setup video specs the ir receiver cord is 5' long. Can be extended using a 3. 5mm av extension cable the distribution block measures approx. 1. 9"x4. 3"x0. 87" & has slots for mounting if desired (screws not included) the distribution block can also be powered by a usb printer cable (not included) the kit contains 4 ir emitter cords to control 8 device & has slots for 2 more emitter cables 1 yr bafx products warranty against manufacturing defects! *important note for plasma tvs plasma tv's emit ir frequencies that can interfere with the ir receiver of this device (not applicable to lcd or led). This can usually be fixed by placing the ir receiver further away from the plasma tv or by placing a piece of scotch tape over the ir receiver to reduce it's sensitivity! this does not occur with lcd or led*1 year warranty only valid when purchased from bafx products or authorized dealers with a valid receipt

BAFX Products IR Repeater - Remote control extender KitBAFX-Products-IR-Repeater-extender

Bafx Products Ir Repeater - Remote Control Extender Kit (54 5exn symf) FAQ.

Works great. more than met my expectations. -Notice from F. Mary, Washington

Click to Show bafx products ir repeater - remote control extender kit (54 5exn symf) Details

Easy to install and works great to keep evreything neat and clean

Bafx-products-ir-repeater---remote-control-extender-kit-(54-5exn-symf) set picture

- E. HakalaVery easy to setup and it works great! i had no issues. I was even able to add a stereo mini plug extension of 20ft with this unit. No delay

Item was perfect! super easy to hook up! controls all my av equipment!

G. Maria, Somerset

BAFX PRODUCTS IR REPEATER - REMOTE CONTROL EXTENDER KIT Featured
Price :    $27.88 (was $27.90)
  • New, smaller foot print & black in color to better blend in with your setup!
  • 1 year bafx products warranty against manufacturing defects*
  • Improved! newly improved ir receiver for better performance and ease of use! compatible with all ir controlled devices including formerly incompatible, marantz devices!
  • Control your ir remote controlled devices that are hidden behind doors or in other rooms where they can't normally be reached by the remote control
  • Kit controls up to 8 devices - expandable to 12 devices (additional ir emitters sold separately)
Brand :    bafx products
Color :    Standard
Size :    Single Zone
Weight :    0.82 pounds
Model :    54-5EXN-SYMF
Quantity :    1
Order click here :    normally ships in 24 hours
Ce :    Best Networking Device (bafx products product review) for BAFX Products IR Repeater - Remote control extender Kit available ( Jul 2019 )

Cmple - IR Repeater Wall Plate Sensor Receivers Dual Frequency

In-wall infrared receiver receives ir signals from a handheld ir remote control and relays this to the audio/video equipment for operation from another room. Mounts to a single gang standard electrical box using a decorate cover plate. Features stylish decorate design. Available in white colors. Dual color led. Green for system status and blue for talk back. Ultra thin design. Mounts easily in any j-box or p-ring. Wide band ir. Receives ir from many types of remotes. Specifications receive frequency range: 34 khz to 60 khz transmit frequencies: 38 khz to 56 khz range: 40ft 38 khz 25ft 56 khz power requirements: 12vdc, 30ma max wire requirements: 2 twisted pair, with our without shield some hd cable or satellite operates at higher frequency signal. Cable boxes like the sa hdtv dvr's and direct tv h21. We recommend to use cat5 or cat6 twisted cable for installation.

Cmple - IR Repeater Wall Plate Sensor Receivers Dual FrequencyCmple-Repeater-Sensor-Receivers-Frequency

CMPLE - IR REPEATER WALL PLATE SENSOR RECEIVERS DUAL FREQUENCY Feature
Brand :    cmple
Weight :    0.24 pounds
  • Color - white
  • Dual color led. green for system status and blue for talk back
  • Wide band ir. receives ir from many types of remotes
  • Stylish decorate design. available in white colors
  • Ultra thin design. mounts easily in any j-box or p-ring
Price :    $9.00
Model :    1140-Amazon
Quantity :    1
Order click here :    normally ships in 1-2 business days
Speakers :    Best Remote Control (cmple product review) for Cmple - IR Repeater Wall Plate Sensor Receivers Dual Frequency available ( Jul 2019 )

Keystone IR Receiver BlastIR Classic other IR Extenders

Clean home theater set-ups (especially set-ups with wall-mounted hd tvs) can require you to store your video equipment (like blu-ray players, dvd players, tivos, etc. ) in a remote place like a closet or another room. Since your remote controls require line-of-sight to control your equipment, you won't be able to use them unless you can send the remote signal which is an infrared (or ir) signal to your equipment with a wired extender. This ir receiver is used in tandem with the blast ir classic. The receiver is mounted on a keystone wall plate near your tv. If you're starting from square one, check out our ir reciever kits.

Keystone IR Receiver BlastIR Classic other IR ExtendersKeystone-Receiver-BlastIR-Classic-Extenders

KEYSTONE IR RECEIVER BLASTIR CLASSIC OTHER IR EXTENDERS Features
Brand :    sewell direct
Color :    White
Size :    Standard
Model :    SW-32904
Quantity :    1
Order click here :    -
Ce :    Best Remote Control (sewell direct product review) for Keystone IR Receiver BlastIR Classic other IR Extenders available ( Jul 2019 )
Price :    $17.19 (was $19.95)
  • Receiving frequencies: 34 - 60 khz
  • Works with all brands of audio/video ir remote controls
  • Designed to be inserted into a standard keystone hole
  • Ir receiving distance: 20' - 40' (remote control dependent)
  • Dimensions: 50mm tube length, 11. 75mm tube diameter, 15. 7 head diameter - 4. 5ft cable

Infrared Repeater System IR Repeater Kit Control Up To 10 Devices Hidden IR System Infrared Remote Control Extender Kit

1. Ir repeater kit comes with 1 receiver and 5 dual emitters that could be able to control up to 10 home theater devices kept behind closet doors or in a closed cabinet with ir infrared remote control extender repeater system. 2. Ir repeater system allows you to control a/v equipment with your existing ir remote controller, such as: receiver, amplifier, tv, home theatre system, cable box, stereo receiver, satellite tv receiver, cd player, dvd player, blu-ray player, etc. 3. Plasma displays emit ir frequencies during use and may cause interference. 4. It is advised to distance the it receiver from any plasma tv or display ability to control multiple appliances at various locations up to 10 m1. 5. Connect ir receiver to any of the 3. 5 mm ports on the ir transceiver, if 2 or more ir receiver are connected, the distance between 2 ir receiver should not be less than 6 m to avoid interference. 6. Cfl friendly: this unit can be installed in an area with compact fluorescent lighting and work in the most lighting environments. 7. Remote indication lights on ir receiver:green being power connected while flashing red indicates the signal is being sent. Package content: 1x distribution block 1x power plug 1x ir receiver 5x dual ir emitters 1x manual

Infrared Repeater System IR Repeater Kit Control Up To 10 Devices Hidden IR System Infrared Remote Control Extender KitInfrared-Repeater-Control-Devices-Extender

INFRARED REPEATER SYSTEM IR REPEATER KIT CONTROL UP TO 10 DEVICES HIDDEN IR SYSTEM INFRARED REMOTE CONTROL EXTENDER KIT Benefit
Brand :    icespring
Weight :    0.5 pounds
Model :    4330159445
Quantity :    1
Order click here :    normally ships in 24 hours
  • Note: plasma displays emit ir frequencies during use and may cause interference. it is advised to distance the it receiver from any plasma tv or display ability to control multiple appliances at various locations up to 10 m1. connect ir receiver to any of the 3. 5 mm ports on the ir transceiver, if 2 or more ir receiver are connected, the distance between 2 ir receiver should not be less than 6 m to avoid interference
  • Ir repeater controls up to 10 home theater devices kept behind closet doors or in a closed cabinet with ir infrared remote control extender repeater system. this product allows you to control a/v equipment with your existing ir remote controller, such as: amplifier, cable box, stereo receiver, satellite tv receiver, cd player, dvd player, blu-ray player, etc
  • Infrared repeater kit controls your ir remote controlled devices that are hidden behind doors or in other rooms. kit controls up to 10 devices - expandable to 12 devices
  • High sensitivity, real time transmission without any delay with its high sensitivity sensor. remote indication lights on ir receiver:green being power connected while flashing red indicates the signal is being sent. cfl friendly: this duafire unit can be installed in an area with compact fluorescent lighting and work in the most lighting environments
  • Ir repeater kit comes with broadband remote control, it is compatible with almost all the electronics appliances in the market with its wide frequency range. ir remote control repeater ( transceiver) is a product which amplifies the ir signal of your appliances, you may be able to conceal your appliances such as in your tv console or cabinet
Price :    $21.90 (was $39.90)
Network Media Player :    Best Accessory Or Part Or Supply (icespring product review) for Infrared Repeater System IR Repeater Kit Control Up To 10 Devices Hidden IR System Infrared Remote Control Extender Kit available ( Jul 2019 )

AV Access HDMI Extender HDBaseT ,Uncompressed 4K 60Hz over Single Cat5e/6a, 70m 230ft 1080P,40m 130ft 4K,PoE+IR+RS232+HDCP2.2,HDR & Dobly Vision,Dolby Atmos & DTS:X

Package contents 1xtransmitter 70tx 1xreceiver 70rx 1xuser manual 1xpower supply 1xir emitter cable 1xir receiver cable(30khz-50khz) troubleshooting 1. Power:make sure all devices are powered on. (source, extender, display devices) 2. Indicator:make sure led indicators of transmitter and receiver are normal according to user manual. 3. Devices:make sure picture can be shown normally when connecting source to display devices directly. 4. Cable:try to plug in and out hdmi/ catx cable or change another hdmi/ catx cable. 4-1 cat 5e/ 6/ 6a/7 cable is recommended, do not use cat5 cable. 4-2 make sure catx cables is less than 230ft for 1080p, 130ft for 4k resolution. 4-3 make sure the two connectors of one catx cable are same standard (eia/tia 568b). 5. Compatibility:please test other source and display devices to determine whether it is a compatibility issue. 6. Ir cable:when control dvd at tv side by dvd remote controller. 6-1 plug ir receiver cable to receiver ir in port 6-2 plug ir emitter cable into transmitter ir out port; make sure the ir emitter head is secured over ir window center of source device. General information product dimension (wxhxd) 145mmx25mmx77mm weight 0. 4kg mountingmounting ear power supply dc18v 1a power consumption11w (pair) input 1x hdmi 1. 4(tx), 1x hdbt 1. 0(rx) input resolution 4960x2160 24/25/30/60hz, 3840x2160 24/25/30hz, 1080p output 1xhdbt (tx), 1xhdmi(rx) output resolution 4960x2160 24/25/30/60hz, 3840x2160 24/25/30hz, 1080p transmission distance cat 6a/7: 3840x2160 60hz 4:2:0 8bit max. 40m(130ft) cat 6a/7: 1920x1080p 60hz max. 70m (230ft) audio format stereo, lpcm, dolby dts-hd control method bi-directional ir+rs232 pass through

AV Access HDMI Extender HDBaseT ,Uncompressed 4K 60Hz over Single Cat5e/6a, 70m 230ft 1080P,40m 130ft 4K,PoE+IR+RS232+HDCP2.2,HDR & Dobly Vision,Dolby Atmos & DTS:XAV-Access-Extender-HDBaseT-Uncompressed

AV ACCESS HDMI EXTENDER HDBASET ,UNCOMPRESSED 4K 60HZ OVER SINGLE CAT5E/6A, 70M 230FT 1080P,40M 130FT 4K,POE+IR+RS232+HDCP2.2,HDR & DOBLY VISION,DOLBY ATMOS & DTS:X Feature
Price :    $116.99 (was $335.99)
  • Recommendation if you need hdmi extender with arc, please check : b01mua0eil (4kex70-arc); if you need a extender to work with apple tv 4k, roku 4, fire tv, cisco cable box, please check : b073ql6yt3 (4kex70-h2). 1-year warranty and free lifetime technical support (av access)
  • Plug and play supports bi-directional poe, ir and rs232; automatic edid management; high compliance with hdcp 2. 2, hdmi1. 4 and hdmi 2. 0b (4k/uhd 60hz with 4:2:0 chroma subsampling only) ultra-slim with fix mounting ear.
  • Uncompressed uhd supports 1080p 60hz up to 70m( 230ft), 4k 60hz 4:2:0 8bit hdr up to 40m(130ft) via cat5e/6a/7 cable; supports 1080p 3d. audio supports dolby atmos, dts:x, dolby truehd, dts-hd master, lpcm 2. 1/ 5. 1/ 7. 1ch, provides you a great picture and fantastic audio.
  • High compatibility the extender can do a really good job with your pc, ps3/ps4, x box, dvd player, apple tv, satellite box, cable box, android box etc; ideal for digital signage, home theater, boardrooms, workshop, seminar, classrooms, conference, gaming, video production etc.
  • High reliability built-in surge/ lightning protection; superior esd protection: +/- 8kv (air-gap discharge) +/- 4kv (contact discharge); one transmitter supports one receiver only. mounting ear for easy installation.
Brand :    av access
Color :    01. 4K HDMI 70M Extender[4KEX70-L]
Weight :    0.88 pounds
Model :    4KEX70-L
Quantity :    1
Order click here :    normally ships in 24 hours
Speakers :    Best Ce Accessory (av access product review) for AV Access HDMI Extender HDBaseT ,Uncompressed 4K 60Hz over Single Cat5e/6a, 70m 230ft 1080P,40m 130ft 4K,PoE+IR+RS232+HDCP2.2,HDR & Dobly Vision,Dolby Atmos & DTS:X available ( Jul 2019 )

ir repeater system - hidden ir control system for home theater Price : 15, was : 21 as 2018-01-14
USUKDEFRESITJPCNCAGlobal
United States
Great Britain
German
France
Spain
Italy
Japan
China
Canada
World Wide
Ir Repeater System - Hidden Ir Control System Home Theater (400020) Reviewed by on puqus.com

Top ir repeater system - hidden ir control system home theater (400020) Content

The F.A.Q. for ir repeater system - hidden ir control system for home theater

Love this ive bought several and use them on evert theater and suround sound system i install.

A number of questions have been asked here.

Showing 20 Q&A on IR-Repeater-System-Control-Theater

(0) Question: Does this work with the remotes that came with my devices (xfinity cable box, dvd player, etc)? or do i need to buy a special aftermarket remote?


(1) Question: Has anyone tried using this adapter with sony bdp-s5100 3d blu-ray disc player with wi-fi?


(2) Question: Does this work with denon a/v receivers (i have x4000)?


(3) Question: I already have a 22/4 wire run from tv mount to closet through attic where at&t u-verse cable box is, can i splice the connection on both ends?


(4) Question: I just switched from verizon fios box to cablevision. the repeater does not work with either cable's samsung box or their scientific atlantic box. ?


(5) Question: Does this work with the new timewarner cisco hd boxes?


(6) Question: How many feet away from the receiver can i install the repeater controller using a mini keystone with 2 conductor shielded cable


(7) Question: Do the emitters have to be on the reciving units? if not, how far away can they be?


(8) Question: My sound bar blocks the current infrared on my tv and my remote won't work. is there a way to use this product to fix the problem?


(9) Question: What is the product number for a longer ir receiver "bar" and if i understand, the (2) dual ir emitters, would handle 4 components?


(10) Question: What is the max distance the equipment can be located


(11) Question: Where can i get a longer i. r. reciever cable


(12) Question: Have a new wall-mounted 65" tv with the cable box and dvr in a closet about 25' away ; want to control tv and closet components by aiming at tv only.


(13) Question: Is this repeater compatible with rcmm components such as u-verse stbs?


(14) Question: I have a samsung 46" lcd which i need to mount on the wall and i've thought about using this ir repeater system. i have a time warner cable box. can anyone advise me whether the ir repeater system will work with my setup?


(15) Question: Will this unit work "as-is" with a motorola time warner cable box in an hd environment or do i need extra parts to support the hd?


(16) Question: Does this system work with direct tv remotes



(note) Question: where/how to get Cables Direct Online (manufacturer's brand) accessories & similiar Cables Direct Online's products

Click to Show/Hide the Answer
Answer:

https://puqus.com/ir-repeater-system-control-theater-1417016pm63w/

Click on the marked text to copy to Clipboard

I have a system where all the components are located in a cabinet on the other side of a half wall because i didn't want everything stacked up in plain view. My problem is that all my surround speaker wires run to this cabinet and i watch tv through an xbox one so changing everything around and keeping surround sound wouldn't work. If you've ever tried to watch tv through an xbox you will know that using the handheld controller is a pain, not only because you have to use gaming buttons to control everything but because the controller will enter sleep mode after some time of nonuse. So if you just want to change channels quick to see a sports score or something you have to go through a process of waking up the controller and then navigating a few menus. There is also xbox smart glass to use your smart phone as a remote but that's just as troublesome. . My choice was to either spend $400 on an rf remote which would control everything or figure out an ir system with my current setup, this little guy did the trick at 1/10 of the cost. I wanted to get away from watching tv through the xbox and watch it on a direct connection from the cable box so i needed to control the cable box separately. I put the ir receiver out by my tv, ran the cord under the carpet to my cabinet, installed the brainbox inside the cabinet, and ran ir eyes to each component. Once the install was done it's a matter of plugging-in to power and boom, i was up and running. . As for the ir device itself the receiver is fairly unobtrusive, it's about 1"x1"1. 5" and has a long cord on it, 10 feet i believe. There is a small blue led indicator on the face which blinks when you send a command though it has nothing to do with actual ir function, if you didn't want to see the light you could paint or tape over it. It comes with some double-sided tape attached to the back for mounting but i wanted mine attached using the top so i had to add tape there. The receiver is strong, even without a direct line of sight it still picked up signals from the remotes, i'm thinking its cone of reception is pretty wide. . The brainbox is small too, smaller than a deck of cards and has flanges if you wanted to mount it to something, i laid mine in the cabinet behind the cable box. The power cord does have a transformer but it's fairly small, i was able to fit it on the surge controller without crowding the existing plugs from other devices. There is 1 input for ir receiver and 6 outputs for ir transmitter though you can use multi-eye cords from each of those giving you what, a total of 18 devices you could control. Do you even have 18 devices? i don't. The brain sends the signal uber-fast, the moment i press a remote button the controlled device is doing what it should be doing, there is no lag that i notice. . And finally there are two double-eye emitter cords included to control up to four devices, i only needed to control three so the other eye is rolled-up and twisty-tied out of the way. The little eyes each have double-sided transparent tape on them, remove the backing, stick to the ir window on the device you're controlling and that's it. These cords are also 10 feet long so i had no trouble reaching all my devices in the cabinet. . In my setup i needed a longer cord to get from the tv to the cabinet so i also purchased a 30' extender cord to connect the ir receiver to the brainbox, any av cord will do as long as the tip is 3. 5mm. You don't need a special cord, just find the cheapest audio headphone cord and go with it, and though i'm not sure how long a cord you could use i've seen other reviews here where people have used cords at over 100 feet long. My 30' cord works fine, i don't notice any delays or interference with the signal. . As a final comment i tried using the "spaceship" rf remote extender in the past (i have a review of that too) but they didn't last, and the cost of additional rf transmitters was more than this ir device cost. These seem to be very similar devices across manufacturer and provider, i figure if this device dies in the future i could swap it out fairly quickly and easily. Overall i'm very happy with it and for less than $30 it was a no-brainer for me.


Bestsellers, Remote ControlTop Ir Repeater System - Hidden Ir Control System Home Theater (400020) FAQ Content

Best ir repeater system - hidden ir control system home theater (400020) in review

I have had my first one a year or two and it works perfectly well. Needed a second one for bedroom, so went with same thing. I have seen some complaints about interference from tvs, when i turn on my samsung lcd in the tv room, i can see the ir receiver flashing from the interference, but once it is on, there is no problem. Hoping my led in the bedroom won't have problems. Positioning of the ir receive may have an effect on the amount of interference you receive. My tv room receiver is about 8 feet from the tv, (diagonal and below the wall mount tv).

B. Ruff, Connecticut

You might like to see Gp100 Video Projector,lcd 1080p Full-hd Level Image Quality,3500 Lumens Led Luminous Efficiency, Wxga Resolution, In Your Living Room Bedroom Meet Entertainment,games,video Don't Worry About Noise. To Ensure Sufficient Brightness, You Need More Power. Meaning That Heat Needs More Stable Fans. Our Noise Level Is Controlled In Acceptable Range (international -Vivibright Gp100 Video Projector,lcd 1080p Full-hd Level Image Quality,3500 Lumens Led Luminous Efficiency, Wxga Resolution, In Your Living Room Bedroom Meet Entertainment,games,video Viewing
  1. Supplementary: 2. High Resolution&high Brightness :3500 Lumens(typical) Led Light Utilization Efficiency With 380 Lux Color Brightness, Hd Level Minimum Requirements 1280x800pixels Physical Resolution. This Means That Your Picture Quality Is Very Clear, But Choose 480p, Means That You See That's Vcd Picture Quality. Gp100 Top-quality Projector - Wxga Resolution (1280x 800) Offers 3. 5x More Resolution Than Svga(800x480) For Hd Image Content.
  2. Supplementary: 3. Trust Gp100, Need 3500 Lumens Led Light Utilization Efficiency, Means Accepting Its Noise : Select Gp100 With Greater Screen Size Compatibility, More Suitable For Your Family, Your Child, Your Wife, As Well As Their Friends Together To Feel The Big Screen. Because We Need 3500 Lumens Led Light Utilization Efficiency, The Higher Power Of The Led Light Source Has Enough Optical Efficiency, Too Much Heat To Require Faster Speed Fans To Lower Their Heat, These Designs Are Reasonable.
Price Fall Vivibright Projector Efficiency Resolution Entertainment (Office Electronics) Vbgp100 Vivibright Projector Efficiency Resolution Entertainment
Or you might like to consider Led Clock Echo Dot 2nd Generation Znewtech Led Clock - A Cool New Gadget For Echo Dot Owners This Elegant Clock Is Designed To Work Online Store Echo Dot 2nd Generation. It Holds Echo Dot Very Well And Allows Customers -Znewtech Led Clock Echo Dot 2nd Generation Black
  1. Properties: Modern And Stylish White Color Led Display.
  2. Properties: Auto-adjust Daylight Savings Time (dst).
Best Price Znewtech Led Clock Echo Dot 2nd Generation Black (Portable Audio) Zc X1b Znewtech Led Clock Echo Dot 2nd Generation Black (Portable

A. Imelda, Durham says

Doesn't work awesome 100% of the time. Mostly works well. I had a nerd-friend install it for me and he did it in like 2-3 minutes and he was hammered. I couldn't figure it out. Granted, i didn't try very hard to figure it out. I'm just happy i don't have to have my door open to use my home theater.

K. Noguera, Bolton

I have a wall mounted tv in the bed room and the blue ray player is in the closet behind it. I can watch dvds in bed without having to get up and point the remote inside the closet. Which does not face the bed. Only issue ive had is the double sided tape on the repeater sensor mounted on the blue ray fall off from time to time. I need to get new double sided tape and clean the blue ray player before reattaching it.

S. Mays, Nevada says

I have a comcast cable box and have been frustrated by its lack of responsiveness to the remote control since i got it two years ago. Now that i'm using the repeater it seems to no longer have problems understanding what i'm trying to tell it to do. I have two of the repeater emitters glued onto the inside of the cabinet door and everything works like a charm! i have the receiver mounted next to the ir receiver on my flat panel tv and the wire tucks under and up and down through the wall into the cabinet below: i. E. That wire is sufficiently long. . I have been wanting something like this for years but have always been worried whatever i purchase would be junk - but after using it for two months i would say this thing is awesome. . Not to mention the fact that now i can keep the doors on my grand parents beautiful 1940's wooden tv cabinet closed, so i can enjoy the pretty outside of it instead of look at the mess inside.

T. Williams, Illinois

This unit is identical to another being sold for much much more. This is not a cheap knock-off - it is identical. Works perfectly. Good manual. Great price. . Note that there are some ir devices that this unit will not work with . Some use special (uncommon/non-standard) ir frequencies for their remote control. And of course, this does noting if your remote control is rf or bt. But for the vast majority of typical devices, it works great.

X. Perez, South Tyneside says

Simple to install. Took maybe 1/2 hr. I had to try the ir receiver in a couple different places before it worked well from a distance. I can be 20' away and it works fine. . The first time i put the receiver at the base of the tv, slightly behind the screen, and could only get it to work if i was within a couple feet of it. The panasonic tv i have has a blacked out area a couple inches wide that runs around the edge of the screen. I ended up sticking the receiver to the top edge of that and the unit works perfectly. . No issues with any of it. Happy camper!

R. Carrie, Camden

I recently mounted my television and hid the components in a cabinet. My main concern was getting my components to recognize my remote and the ir repeater system does what it's supposed to! just be wary where you install the repeater. I originally place it near the top left of my tv and couldn't seem to get it to work. I moved it down to the bottom middle of the tv and it works a little better. Sometimes i still need to point it directly at the sensor to get it to work. Other than that, the ir system works pretty well for what i need!

Y. Lisa, Salford says

Works great on my houseboat so that i can keep the electronics hidden but still control them.

W. Beale, Sandwell

Works exactly as described. Easy to set up and use.

Z. Kristen, Milton Keynes says

Works like its supposed to good price

U. Paula, Quebec

Worked very well, outside (under patio cover) from across the pool. Like the blue activity led to show you the ir has been received. Would purchase again!

J. April, Montana says

Works as advertised. Now able to leave cabinet doors closed and still operate ir electronics.

L. Shawna, City of London says

The price was right on. It shipped quickly. . The instructions are very minimal, but it seemed pretty straight forward. I was a little concerned at first because it didn't show the blue light that shows the ir signal is being received. But after a little while, i realized the power was plugged into the wrong port. . After that it did take some trial and error to place the ir transmitter eyes. But once fine tuned, it works very well. . I am using it with a comcast motorola cable box. The distance from the ir remote to the receiver was about 12 feet away and it is working well.

G. Weber, Northern Territory

Great item - works as expected and affordable.

N. Angela, North East Lincolnshire says

First, your remote needs fresh batteries to set this up! plug the base unit power supply in and connect the ir receiver (long thin piece). Aim the remote at the sensor from about a foot and press buttons. Your remote should make the (blue) led in the sensor light up, if not then the unit will never work for you. Second, take some time and experiment with the angles that the receiver can see your remote's ir signal. That will help you with positioning the receiver at the most effective angle and in the best location. Third, i found i needed to play with the position of the ir emitters at the dvd player. I ended up positioning the emitters where they consistently triggered the dvd player, and then used a small piece of black electrician's tape to hold them there. In my case with a panasonic dvd player, that meant having them on top of the unit, hanging over a bit onto the ir receiver in the dvd player. So it did take a little time (30 minutes or so) to get good, consistent results. But, once i got everything ironed out, it has worked very well.

P. Connie, California

This product worked just as described. Was easy to hook up, and the cost is quite reasonable. My only complaint is that you need to be careful when dealing with the wires for that connect the emitters to your components. If you snag a wire accidentally after attaching an emitter, the emitter will pull off the end of the wire rather easily, and you can't reattach. I had to order another set of emitters after doing that to one, but it was reasonably priced and the new one worked fine. Just exercise some care when hooking this unit up.

O. Mathis, Alabama says

The delay is really bad, but it works.



Top ir repeater system hidden ir control Review

Disadvantage and Critical reviews

O. Eleanor, New Brunswick says

Simple put too much delay or something for the cable box, you have to hold down the button extra long so you guessed it; if too long then multiple signals of that button will be processed. . Too bad.

D. Sheila, Barnsley

This appears to be a good product, i just could not get it to work with my tivo premiere. In testing it i was able to get it to work with a couple of other electronics, so the issue appears to be specifically with it repeating the single to the tivo. Unfortunately the company wasn't able to offer a solution, but they did issue a refund for the product. Better trouble shooting options and tips would be nice along with a list of products it will and will not work with the repeater.

T. Eva, Southwark says

I installed this unit as described in the instructions but the functions will not work with the att uverse cable box. I'm aware that this remote and box require the dual band frequencies to work and according to the item description it should work fine. I've tried various placements of the ir emitter, without success. . The repeater works fine with my sony receiver and samsung bluray player. . I think for the price it should include the dual frequency capability.

. Hakala, York

Had some problems with getting this to work correctly.

M. Guest, Tameside says

Unit was non-functional. The ir confirm light never came on, so the problem was definitely on the receiver side.

Q. Ruby, Torbay

Pain to setup, ir repeater doesn't work very well.

N. Beale, Cheshire says

I found the transmitters to be so weak that if they were not placed directly on the receiving diode it would not work at all. I was able to get it to work with my dvd player and audio receiver after hunting for the best location. It never would control my cable box. In another review i found that there is a replacement receiving element that might solve this issue but i'm not interested in spending more on something that may or may not work, and still have spotty performance from the weak nature of the transmitters. Keep searching, spend a little more give this one a pass.

Z. Patricia, Hampshire

They are a big disappointment. The range is only about five feet. Our couch is about twelve feet away from unit. They just don't work for us.

I. Cathy, Sutton says

I bought this for a simple install to repeat signals to a xbox360. I hooked it up and as soon as i plugged in the ir receiver it burnt the plastic right off the front. I thought maybe the ir receiver was bad and i had an extra laying around so i plugged mine into it and it melted the plastic off of it too. A total bust and i would not waste time or money on this. I am going to buy a better model and then this cheap piece of crap. I literally had it for two minutes and it broke. . Do not buy! do not buy!

H. Guest, South Dakota

The unit does what is advertised. If you are using a plasma, then you need to mount it behind the tv (mine is about 4 inches, on the wall) does its job well. . The only problem is that this is the third time i have purchased the unit (the parts are run through the wall and i don't feel like opening the wall) it is very fragile and the slightest electrical disturbance renders it useless. On top of that you can't just buy a replacement brick. One time when the power went out, and another time when i was reconnecting a displaced connector.

W. Cecilia, Baden-Wuerttemberg says

I thought i would try an alternative ir remote repeater to use for my video surveillance installations instead of the xantech brand i have been using. At my dealer cost is still more than double the price of this brand. . This product really only works at the close hard-wired range of around 10 ft. Or shorter. My experience has been at about 25 ft. Or longer, this unit is not powerful enough to project the signal for longer distances. . I tested this unit right beside the xantech model, and the xantech unit worked. . You get what you pay for.

F. Benton, New Jersey

The repeater doesn't work well with at&t. It's at&t's fault for using a non-standard frequency, but these guys should have adapted by now and made a working product. Don't buy if you have uverse.

K. Susana, Walsall says

Would be better to have a powerful flasher instead of having to attach to each component.

E. Emma, Bayern

Works fine, tv has a hard time reading to it sometimes but i think thats the tv remote

V. Pamela, Tennessee says

I bought this one thinking it would work as needed. Didn't work at all. Had to return it and get a better quality repeater system and when that one came it worked even better then i thought. Don't waist your time with this one. Would not recommend. Also it cost me $10 to have it shipped back to company.

X. Nees, Greenwich

Not as good as first repeater i had

. Kelly, Bath and North East Somerset says

Works as intended, the only thing i don't like is that the sensor bar seems to really need a direct line of site, where the blu-ray player and dvr box it is replacing didn't need you to really point the remote at it directly. Didn't work with my hr-24 directv box, but i switched it to rf so no problem there. Also the little stickies on the ir transmitters seem to fall off the ir receiver, so i added some 3m tape to hold the ir cables on to the blu ray player. So, overall, does the job, is the cheapest of the lot, and it works ok.

C. Delgado, Mississippi

*fire hazard* do not order this unit. The ir receiver melted promptly after i powered up the unit. Not safe at all.

J. Linda, Rhode Island says

I've rated it a three and will change this depending on how the seller and/or manufacturer handles my recent inquiry. . The product is pretty simple and so are the instructions. Plug it in, put your new ir receiver some where convenient for all angles and stick the led's to the ir receiver on your devices. I did this. I get status lights indicating it should work but no signals make it to my devices. . It appears to be a good product with nice packaging. The cable inputs on the little black box do feel a little rough and snug but other than that feel like quality stuff. It comes with all necessary stuff to get you going including extra stickies in case you need to move your led's. . I hope i hear back soon and i can bump this to a 5.

R. Nielsen, Arizona

Garbage, died after 4 months and the phone number they have listed does not work. Can't return it. So $27 down the drain.

B. Cageen, Colorado says

If you have dish network, or one of the other systems that use dual band infrared, then don't waste your money buying this item. It will not work. Remote signals for other devices worked fine, and the blue light flashes when it is passing a signal through. It is one way you can tell that the dish signal is not working. No blue flashing light. For about $2. 00 more, you can buy the "eforcity infrared extender system kit , black" on ebay and they advertise that theirs is dual band. I thought this was identical, but it is not.

S. Erickson, Salford

Repeater would only work if the blaster was precisely located over the receiver and even then only one out of five signals would go through. This was probably for the best as most of the signals were mistranslated (volume up changed the input, volume down changed the channel, etc). Returning the item.

A. Donna, Wakefield says

Mounting of the emitters is questionable and emitter housings fell apart, so i used my own tape to attach them to my component equipment ir receivers. Works fine other than that. Love the blue conformation light at the tv.

U. Angelica, Arkansas

Typical, received item with the power supply missing. Had to send it back so i don't even know if it worked.

P. Morgan, Stoke-on-Trent says

Worked intermitten had to buy some other product



Leave a Reply

You must be logged in to post a comment.


Back to Top

Related Products

  • Buy Now
    Anymote Home - Smart Universal Remote Control Iphone, Ipad Android (tc1amh1)

    Anymote Home – Smart Universal Remote Control Iphone, Ipad Android (tc1amh1) 174

    Fast Deal Anymote Home - Smart Universal Remote Control Iphone, Ipad Android (tc1amh1), - Smart Universal Remote Control Iphone, Ipad Anymote Home Turns Your Phone Or Tablet Into The Hub Of Your Home Control, Allowing You To Connect To All Your Infrared, Wifi Or Smart Home Devices And Control Them From A Unified -Anymote Home - Smart Universal Remote Control Iphone, Ipad Android
    1. I've been using this for over a month now, and i can say it's the best remote i've ever used. I've made it my personal research project to find a good remote, read all the cnet, engadget, online store etc. Reviews before i made a decision and ended up with anymote, and i'm happy with my decision. Mo... go to https://puqus.com/anymote-home-universal-control-android-17416sie5bc/#anymote-home-universal-control-android
    2. Benefit: More Than 1, 000, 000 Devices Supported - Tv, Set Top Box, Dvd & Blue Ray Players, Projectors, Etc.
    3. Benefit: No Wires, 12 Months Battery Life (2xaa) - Bluetooth 4. 0 Le.
    Lowest Price Anymote Home - Smart Universal Remote Control Iphone, Ipad Android (Remote Control) Tc1amh1
  • Add to Cart
    Bond Ceiling Instantly Compatible (bd 1000)

    Bond Ceiling Instantly Compatible (bd 1000) 1457

    Very Cheap Bond Ceiling Instantly Compatible (bd 1000), - Makes Your Old Ceiling Fan Smart Wi-fi Instantly. Works Echo Google Home Bond Makes Ceiling Fans Smart Home Automation Should Not Break The Bank. Bond Lets You Keep Your Beloved Appliances, Connect Them To Wi-fi And Control Them Your Alexa Or Google Home -Bond - Makes Your Old Ceiling Fan Smart Wi-fi Instantly. Works Echo Google Home Compatible
    1. Reviews: Control Up To 6 Ceiling Fans - A Single Bond Can Control Up To 6 Ceiling Fans From One Central Location.
    2. Reviews: Ios And Android App For Quick Setup.
    3. This device works seamlessly. The setup was easy and all my fans now operated via voice through my online store echo devices. Great addition to my smart home setup https://puqus.com/bond-ceiling-instantly-compatible-145771gvgvvh/#bond-ceiling-instantly-compatible
    Reasonable Bond Ceiling Instantly Compatible (Remote Control) Bd 1000

Product Image Gallery

Top-ir-repeater-system-control-theater-1417016pm63w-Content