Mount Mi 484c Articulating Premium Capacity (Mount It) 2075

Review for mountit articulating corner mount

Price was $59.99. Bought this mount for a 49 inch samsung qled tv. It is rock solid in the wall. Used 4 screws into studs and 2 tapcons to go all the way into the concrete of the house, so the tv isnt going anywhere. I think this is very good for the price. Was a bit heavy so not real easy to install on your own. Would be fairly difficult to measure and mark holes while trying to hold it up yourself, but this is the first wall tv mount ive installed, so might be easier for people that have done it before. Would buy again for other rooms if the need ever arises.

-R. Courtney

Mount-it articulating corner mount tv premium swivel full motion wall bracket 37-63 inch screen lcd oled plasma 4k flat panel screens vesa up to 800×400, 132 lb capacity, mount-it! experience and guarantee. mount-it! is the expert in television and computer monitor mounts. we apply our decade long experience in this field to offer the best features 2305620-mount-it mi-484c articulating corner mount tv premium swivel full motion wall bracket 37-63 inch screen lcd oled plasma 4k flat panel screens vesa up to 800×400, 132 lb capacity, black

  • Bonus: Universal Tv Wall Mounting Bracket Design Fits Most Of 37-63 Inch Lcd/led/plasma Tvs On The Market (even Up To Some 70 Inch Tvs) Up To Vesa 800×400 And 132 Lbs (fits Vesa 800×400, 700×400, 600×400, 600×300, 600×200, 400×400, 400×300, 400×200, 300×300, 300×200, 200×200, 200×100, 200×150, 100×100 Mm). Please Check Vesa (mounting Hole Pattern Behind Tv), Stud Spacing, Possible Blocked Cable/input And Tv Weight Prior To Making Purchase Decision To Determine Whether This Tv Wall Mount Fits Your Tv And The Installation Application.
  • Bonus: This Wall Mounting Kit Is Compatible With Samsung, Sony, Lg, Sharp, Insignia, Vizio, Haier, Toshiba, Sharp, Element, Tcl, Westinghouse 37, 40, 42, 48, 49, 50, 51, 52, 55, 60, 63 And Some 65 And 70 Inch Tvs. Tilt, Swivel, Articulate, Extend, Collapse With This Universal Tv Wall Mounting Bracket.

Reasonable Mount Mi 484c Articulating Premium Capacity (Av Furniture) Mi 484c

Buy Now


Foreword

The instructions are weak. But it's a solid product and it works well so i'm not going to dock a star. . For drywall installation, i used 1x8" boards attached to 16" on center studs. I made sure each board covered two studs and went to the corner. I then screwed the lag bolts from the mount into the boards. The final result is super solid. . I wish that i was given measurements of how far out to space the mounts from the corners for articulation vs. Tv size. A simple guide/tv size table would've been great. I mounted a 55" tv and spaced out each mount base 10" from the inside edge of the mount to the corner. . Overall, once it was all installed, it worked great and is very solid. The 55" tv can articulate a bit left and right, and a lot up/down. It's easy to move The Best mountit articulating corner mount ( Jun 2019 ) | Transform Partners-Av Furniture Review Bonus Mount-It! MI-484C Articulating Corner Mount for TV Premium Swivel Full Motion Wall Bracket for 37-63 inch Screen LCD OLED Plasma 4K Flat Panel Screens VESA up to 800x400, 132 lb Capacity, Black Unique articulating wall mount designed specifically for corner installation. mount arms can independently articulate to allow centered or off-centered corner installation. by separating the wall plates, they can be installed on separate adjacent walls. if the wall plates are attached to the same wall, the mount can be installed just like any other articulating tv wall mount.. Universal tv wall mounting bracket design fits most of 37-63 inch lcd/led/plasma tvs on the market (even up to some 70 inch tvs) up to vesa 800x400 and 132 lbs (fits vesa 800x400, 700x400, 600x400, 600x300, 600x200, 400x400, 400x300, 400x200, 300x300, 300x200, 200x200, 200x100, 200x150, 100x100 mm). please check vesa (mounting hole pattern behind tv), stud spacing, possible blocked cable/input and tv weight prior to making purchase decision to determine whether this tv wall mount fits your tv and the installation application.. This wall mounting kit is compatible with samsung, sony, lg, sharp, insignia, vizio, haier, toshiba, sharp, element, tcl, westinghouse 37, 40, 42, 48, 49, 50, 51, 52, 55, 60, 63 and some 65 and 70 inch tvs. tilt, swivel, articulate, extend, collapse with this universal tv wall mounting bracket.. Continuous tilt feature (up to 15 degrees up or down) for better viewing angle and reduced glare. low-profile design ensures tv is close to the wall for a sleek finish. large open wall plate design assures easy access to back of the tv and cables.. Weight rated to 132 lbs - this bracket is one of the strongest brackets available on . install your precious tv with confidence. dual arm design prevents sagging that might be visible on lower weight rated and single arm mounts. constructed from reinforced steel. quick and easy to install - bracket comes complete with full instructions, integrated bubble level, installation hardware. .

Mount-it Mi-484c Articulating Corner Mount For Tv Premium Swivel Full Motion Wall Bracket For 37-63 Inch Screen Lcd Oled Plasma 4k Flat Panel Screens Vesa Up To 800x400, 132 Lb Capacity, Black Review (fba mi 484c)

1 day owned (will edit review later). . Mount is exactly as described and depicted. Appears to be made of high quality components. It is mounted in a corner holding a 100 pound t. V. . 2 weeks owned. . Mount was easy to mount in the corner. Insure when mounting you use studs and mount as far in toward the pivots as possible for greatest stability. It is holding a 50" toshiba plasma t. V. Weighting approximately 110 lbs. Mount has been extended near full extension since install and has not flexed, shifted, or moved in any negative fashion. I am very pleased with this purchase and would recommend this mount for anyone needing to mount a t. V. In a corner. . 6 months +. . This mount has held strong and worked great. I would recommend this to anyone who needs a corner installed mount. -. Gilmore

Mount Mi 484c Articulating Premium Capacity

  1. Class: Electronics
  2. Brand: Mount-It!
  3. Color: Black
  4. EAN: 0818103020227
  5. Product Dimensions:
    Height:10.75 inches
    Length:35.00 inches
    Width:4.63 inches
  6. Manufacturer: Transform Partners LLC
  7. Model: MI-484C
  8. MPN: FBA MI-484C
  9. Total Items: 1
  10. Quantity: 1
  11. Part/Serial Number: FBA MI-484C
  12. Type: Speakers
  13. Category: AV FURNITURE
  14. Product Type: 2305620
  15. Size: 35 X 4.6 X 10.8 Inches
  16. UPC: 628586571877

mount-it articulating corner mount tv premium swivel full motion wall bracket 37-63 inch screen lcd oled plasma 4k flat panel screens vesa up to 800x400, 132 lb capacity, Speakers, Mount-it! experience and guarantee. mount-it! is the expert in television and computer monitor mounts. we apply our decade long experience in this field to offer the best features at value prices. contact our friendly customer support team for any questions or issues. features: fits most of 37-63" tvs large extension capability is ideal for entertainment center installation. tilt, swivel and extend/collapse function easy tilting angle adjustment heavy duty steel construction and high-tech welding technology built-in bubble level makes leveling work easy and convenient includes all necessary mounting hardware specifications: - tv size range: 37 - 63 (some even up to 75" depending on vesa bolting pattern and the tv weight) - max tv weight: 132 lbs - mounting pattern: universal and up to vesa 800x400 and 132 lbs (fits vesa 800x400, 700x400, 600x400, 600x300, 600x200, 400x400, 400x300, 400x200, 300x300, 300x200, 200x200, 200x100, 200x150, 100x100 mm) - tv mounting holes: up to 32. 5 in apart horizontally and up to 15. 75 in vertically - wall plate dimensions: each plate is 8. 9 wide by 8 high. Mount Mi 484c Articulating Premium Capacity (MI-484C-Mount It).

Mount Mi 484c Articulating Premium Capacity Speakers

PROS
  • It took some planning and measuring and the use of a stud finder was very helpful. Mine came with instructions only for concrete/brick walls. If you're application is into regular study/drywall rooms then here's your guide:. . Step 1: use stud finder to find edges of studs and mark them. Step 2: measure for desired height of tv/mount and mark holes for lag screws (6 inches apart (center to center) top to bottom). Step 3: mark holes for third (and/or 4th) screws on each arm of mount. Note these will not go into a stud. Read on:. Step 4: use toggle anchors or i recommend using cobra driller toggle drywall anchors for securing extra bolts in drywall applications. Step 5: drill pilot holes for lag screws and anchors. Step 6: screw in anchors. Step 7: have someone hold up the mount while you screw in two of the stud side lag screws on one of the mount arms (helper dismissed till step 12). Step 8: screw in lag screws for other mount arm. Step 9: screw in bolts for anchors. Step 10: use built in level to adjust level-ness and then tighten the screws securing mount arms to mount surface. Step 11: bolt mounting brackets to tv - back out the screws that will secure the brackets to the mount from underneath. Step 12: use helper to help hang tv/brackets onto mount (helper dismissed! ). Step 13: tighten underside screws to secure brackets to mount. Step 14: enjoy / sigh relief! . . Install certainly takes some measuring and planning but it's worth it. My wife and i have our 55" tv hanging from the wall with this mount so that it is on there rock solid. There is no chance of the tv falling over if kids are running/jumping around in the living room. (important especially if you have a wii! ) i'm a worry wort and i feel much safer with the tv bolted to both walls of the corner with this rock solid mount. Love it.
  • I could easily be that person who takes a star off for a tiny reason, but i won't. After going into bestbuy to look for corner units, and being told "good luck finding that" by the sales guy; i found this gem. First and foremost it's a solid piece of equipment, it is holding my 55" screen no problem. One piece of advice first, measure your tv for the corner and how much it will stick out. Second look for your studs, anyone who tries to use the drywall mounts is a brave soul. Lastly, go buy better lag bolts. The hardware they send is decent for attaching your tv, but the lag bolts for the studs are lack luster. Either way this mount has saved my living space and allowed me to get the set up i need. It's truly a great product.
CONS
  • This item looks very nice in the pictures, but after receiving it and looking it over i could clearly tell that it is less than impressive. After installing it and mounting my 40" plasma tv on it the previous opinion of "less than impressive " quickly went to completely unimpressed and removed and reordered a better mount. For starters this is just a metal frame with cheap plastic that covers it to make it look heady duty. It would be ok for tvs up to 32" if it is a very light weight tv. Anything larger than that or if it is a heavy tv, it will not impress. My worry is not that it will pull out from the wall, but that the metal will bend or break from the weight of the tv. I followed the manufacturer's instructions and i am under the minimum tv size rating. Over all this is a very cheap product and would only be good for mounting a small lightweight tv 32" or smaller.
  • Good mount. Holds my 43" lg led up just fine in the corner. Nice range of articulation and doesn't stick out of the corner too much. It is an absolute bear to install with 1 person. Only fasteners given were for concrete/block. Needed some drywall anchors along with some wood screws for the few studs i could find.
  • It works. But it's stiffer than a 90 year olds back. Great quality and idea, but moving it in and out is very difficult.

mountit articulating corner mount Mount-It! MI-484C Articulating Corner Mount for TV Premium Swivel Full Motion Wall Bracket for 37-63 inch Screen LCD OLED Plasma 4K Flat Panel Screens VESA up to 800x400, 132 lb Capacity, Black (Switch to Mobile/Desktop Version)

I purchased the 42"-70" model for a 60" lcd. It is well built and comes with perfect sized lag bolts to secure to the wall studs. This thing could hold a heavy 70" with no problems. The only thing i didn't like was the way the tv hangs on the mount. Its a bit sloppy there and you need to rig up a slat board or something to make the screen flat instead of slightly angled down. . Its a two person job mounting this to the wall. We just marked up the wall where we wanted the tv and moved the mount to the nearest studs. The two vertical bars shown in the pic that mount to the back of the tv, slide along that track allowing you to center the tv in case the studs aren't centered. Sliding the tv back and forth did cause some slight leveling problems but the front mount plate has screws for fine adjustment to the level, so its not hard to get your tv perfectly level even if you got off mounting the back plate to the wall. . It could just be me but i also prefer to have 2 people to swing this thing out away from the wall. I tried to do it myself but became uncomfortable with how much flexing the tv was doing trying to operate it. Its a little stiff. . Highly recommend this.

Mount-it Mi-484c Articulating Corner Mount Tv Premium Swivel Full Motion Wall Bracket 37-63 Inch Screen Lcd Oled Plasma 4k Flat Panel Screens Vesa Up To 800x400, 132 Lb Capacity, Black
Click to see NoticeMount Mi 484c Articulating Premium Capacity (Mount It)"I am very impressed by this television mount. I bought it to mount a tv outside in brick and mortar, and around a corner, instead of how most people use it (in a corner, like inside a room). I couldn't find anyone who had reviewed the product who had mounted it this way, so i wasn't sure it was going to work, but the way the outer-most brackets appeared to hinge in the photos made me believe it would work. Now, i can swivel the tv toward the outside fireplace, or all the way around the other direction toward my smoker. . The product is extremely sturdy, made with heavy gauge metal. And as a surprising but absolutely delightful bonus, the pre-drilled holes in the mounting plates were perfectly spaced to fall on mortar joints between standard size brick used on houses. So i was able to drill through mortar only and didn't have to drill through the brick itself, which could have produced open space behind the brick face that wouldn't have secured the anchor bolts nearly as well as solid mortar. I've posted a pick from underneath looking up to give people an idea of how great this product is for this purpose."

(0) Question: Will this mount work with samsung uhd curve 750d


(1) Question: Will it hold a 65 inch tv


(2) Question: What is written on the mount-it *box*? is the max. tv size supported by this mount 60 or 70 inches?



Computer & Monitor Mounts » Projector Mounts » Speaker Mounts » Mount Mi 484c Articulating Premium Capacity (Av Furniture) Mi 484c


Small Corner Duct Cable Raceway 1075 Series - 5 Feet - Taupe

Perfect for commercial, industrial and residential environments, the corner duct cable raceway wedges neatly into any corner and hides unsightly cables running from the ceiling to the ground. This triangular channel comes standard with a pre-applied adhesive backing on two sides and includes a slide-on cover for easy access and installation. In individual orders, the corner duct cable raceway comes in white, and can be painted to blend into any room.

Small Corner Duct Cable Raceway 1075 Series - 5 Feet - TaupeSmall-Corner-Duct-Cable-Raceway

SMALL CORNER DUCT CABLE RACEWAY 1075 SERIES - 5 FEET - TAUPE Feature
Brand :    electriduct
Color :    Taupe
Size :    1 Stick
  • Channel size: (see picture 2). this is the small (1075) corner raceway
  • Manufactured of pvc, ul 94-vo compliant and flame retardant
  • 1 stick - length of each stick: 5 feet - pre-applied adhesive backing - attention: clean wall surface, allow 48 - 72 hrs for adhesive to cure before adding cables. depending on location (ceiling), surface type, and weight, additional adhesive or screws may be needed for permanent installation.
  • Medium: /gp/product/b00uibwcvg large: /gp/product/b00uibw7ts
  • Can be painted with a latex based paint to help blend in with walls and ceilings
Price :    $10.99 (was $13.98)
Model :    CECOMINOD041540
Quantity :    1
Order click here :    normally ships in 24 hours
Speakers :    Best Ce Accessory (electriduct product review) for Small Corner Duct Cable Raceway 1075 Series - 5 Feet - Taupe available ( Jun 2019 )

Small Corner Duct Cable Raceway 1075 Series - 5 Feet - White

Perfect for commercial, industrial and residential environments, the corner duct cable raceway wedges neatly into any corner and hides unsightly cables running from the ceiling to the ground. This triangular channel comes standard with a pre-applied adhesive backing on two sides and includes a slide-on cover for easy access and installation. In individual orders, the corner duct cable raceway comes in white, and can be painted to blend into any room.

Small Corner Duct Cable Raceway 1075 Series - 5 Feet - WhiteSmall-Corner-Cable-Raceway-1075

SMALL CORNER DUCT CABLE RACEWAY 1075 SERIES - 5 FEET - WHITE Feature
Brand :    electriduct
Color :    White
Size :    1 Stick
Weight :    0.50 pounds
  • Manufactured of pvc, ul 94-vo compliant and flame retardant
  • Can be painted with a latex based paint to help blend in with walls and ceilings
  • Channel size: (see picture 2). this is the small (1075) corner raceway
  • Medium: /gp/product/b00uibwcvg large: /gp/product/b00uibw7ts
  • 1 stick - length of each stick: 5 feet - pre-applied adhesive backing - attention: clean wall surface, allow 48 - 72 hrs for adhesive to cure before adding cables. depending on location (ceiling), surface type, and weight, additional adhesive or screws may be needed for permanent installation.
Price :    $8.70 (was $14.50)
Model :    1075
Quantity :    6
Order click here :    normally ships in 24 hours
Speakers :    Best Ce Accessory (electriduct product review) for Small Corner Duct Cable Raceway 1075 Series - 5 Feet - White available ( Jun 2019 )

WELLAND Big Size Phoenix Corner Wall Mount Shelf DVD Players/Cable Boxes/Games Consoles/TV Accessories, Black

Phoenix corner wall mount shelf makes space utilization possible from any corner it appears to literally float, attached to the wall by an unknown force. Use to organize books or display pictures and family artifacts. The black color fit for any living decor.

WELLAND Big Size Phoenix Corner Wall Mount Shelf DVD Players/Cable Boxes/Games Consoles/TV Accessories, BlackWELLAND-Phoenix-Consoles-Accessories-Black

WELLAND BIG SIZE PHOENIX CORNER WALL MOUNT SHELF DVD PLAYERS/CABLE BOXES/GAMES CONSOLES/TV ACCESSORIES, BLACK Pros
Price :    $36.49 (was $39.99)
  • Size:the biggest three sides are about 17 1/4" x 17 1/4" x 14", the thickness is 1 3/4". more detail please see the sixth image for the dimension
  • Easy to install and hang, all hardwares and instruction are included, strong enough to hold the weight up to approximate 30 lbs, when installed properly
  • The feature: turn any corner into elegant and useful storage and display space. the corner shelves not only offer an attractive and contemporary way to display your books, cd, jewelry and so on, but also can holder dvd players/cable boxes/games consoles/tv accessories
  • Any other questions free to contact with us, 24 hours seller support at your service, 100% satisfaction guarantee.
  • Material: made of laminate and composite wood. durable, mildly waterproof and environmentally friendly
Brand :    welland
Color :    20-inch Black
Weight :    6.60 pounds
Model :    WSV109-200 Black
Order click here :    normally ships in 24 hours
Home :    Best Home (welland product review) for WELLAND Big Size Phoenix Corner Wall Mount Shelf DVD Players/Cable Boxes/Games Consoles/TV Accessories, Black available ( Jun 2019 )

InstallerParts 37 -65 TV Corner Mount Swivel/Tilt 20 Dual Extension Arm Heavy Duty LCD LED TV Monitor Flat Panel Screen, HDMI Cable

Compatibility installerparts flat tv wall mount is designed to fit televisions of all brands, including samsung, lg, sony, vizio, toshiba, insignia, sharp, and any other hdtv sets between 37" to 65". Where can you use our tv mount? this mount is perfect for installation in your living room, family room, garage, or fitness area or in commercial settings such as a bar, restaurant, fitness center, waiting area, dentist office, doctors office and any other area where two walls come together. Product features heavy duty swivel and tilt lcd/led flat screen tv mounting bracket. Tilts up to 15 up and down and swivels 60 , which results in a wide range of motion for maximum flexibility. The distance from the wall to the tv mount is shortest at 5" (125mm) and extends to 20" (515mm), permitting you to adjust the tv to your desired height. Will my tv fit? this tv wall mount fits most 37"-65"; lcd/led flat panels up to 132lbs (60kg). Supported screen size is shown as a guidance. Please check bracket dimensions and make sure overall bracket size does not exceed tv. Our plasma tv mount meets vesa mounting interface standards (mis). Vesa is an international nonprofit that supports and sets industry standards for the pc workstation and consumer electronic industries. The led tv mount comes with full mounting hardware included and a slide-in vesa plate can be taken off for a quick and easy install. Product specifications: brand: installerparts tv size: 37"-65" wall to tv: 5" to 20" (125mm to 515mm) tilt angle: 15 up and down swivel: 60 weight capacity: 132lbs (60kg) vesa compatibility: 200x200mm to 800x400mm color: black

InstallerParts 37 -65 TV Corner Mount Swivel/Tilt 20 Dual Extension Arm Heavy Duty LCD LED TV Monitor Flat Panel Screen, HDMI CableInstallerParts-65-Corner-Mount-Extension

INSTALLERPARTS 37 -65 TV CORNER MOUNT SWIVEL/TILT 20 DUAL EXTENSION ARM HEAVY DUTY LCD LED TV MONITOR FLAT PANEL SCREEN, HDMI CABLE Features
Brand :    installerparts
Color :    Black
Model :    5590
Quantity :    1
Order click here :    -
Ce :    Best Av Furniture (installerparts product review) for InstallerParts 37 -65 TV Corner Mount Swivel/Tilt 20 Dual Extension Arm Heavy Duty LCD LED TV Monitor Flat Panel Screen, HDMI Cable available ( Jun 2019 )
Price :    —
  • Swivel & tilt: swivels 60 in either direction and tilts 15 upwards and downwards.
  • Heavy duty universal corner mount: fits most 37 to 65 inch flat panel displays up to 130lbs
  • Vesa compliant: our tv mount meets vesa mounting interface standards (mis) and is compatible with mounting hole patterns from 200x200 to 800x400.
  • Easy installment: standard hardware required to fasten your lcd led or plasma tv to your corner mount, comprehensive product installation manual and hdmi cable included.
  • Design: made with solid toughened steel construction and a durable scratch resistant finish.

Mount-It TV Wall Mount Shelf Bracket Under TV Cable Box, DVD Player, Stereo AV Components Shelf,Black

Sturdy, but difficult to put together with poor instructions. Wish it wasn't glass, but seems secure.

This dvd mount bracket is designed-inch attach-inch the back of your tv in its vesa mount holes. The unit has a smoked tempered glass shelf that can be placed above or below the tv-inch hold a dvd player or any other similarly sized device. The bracket can fit on almost any tv with a maximum vesa mount size of 400x380. The maximum weight capacity of the bracket is 10 kg (22 lbs) so if it is setup with the shelf under the tv the-inch tall weight of the tv and whatever is put on the shelf cannot exceed the maximum weight capacity. The shelf can also be mounted above the display in which case it can support the entire 22 lb. Weight. Ps: tv mount is not included. Instruction on how to install and hardware included.

Mount-It TV Wall Mount Shelf Bracket Under TV Cable Box, DVD Player, Stereo AV Components Shelf,BlackMount-Bracket-Player-Stereo-Components

Mount Bracket Player Stereo Components (Mount It) FAQ.

I found that installing this shelf was a little challenging. It was difficult to get the shelf onto the back of the tv and attach the wall mount all at the same time. Since i can't think of a way to make it easier, i am not going to count that against the product. Once it was installed, it looked very good and was a perfect size. It holds a cable box as well as a small power strip and does not extend out so far from the tv to be a problem. Overall, a great solution for the price. -Notice from K. Evelyn, Tower Hamlets

Click to Show mount bracket player stereo components (mount it) Details

I bought this to have some place to put the cable box under a tv that is mounted to the wall. Very easy to install and works perfectly.

Mount-bracket-player-stereo-components-(mount-it) set picture

- Y. AnonymousHave two of these for our wall mounted tvs.

Awsum ! i just recently thought about , what if there was a shelf that could hang off of the wall bracket , for my dvd , & cable box , if you hang a tv on the wall , you have to have , either a cable box or ethernet dvd , to watch tv where i live , so its either route all the wires to a stereo cabinet or something , or a shelf such as this , & this is a much cleaner look ! freeing up space in the room it serves

M. Lisa, Alberta

MOUNT-IT TV WALL MOUNT SHELF BRACKET UNDER TV CABLE BOX, DVD PLAYER, STEREO AV COMPONENTS SHELF,BLACK Benefit
Brand :    mount-it!
Color :    Black
Size :    1 Shelf
  • Ideal for storing your cable or satellite box, dvd player or your playstation/xbox
  • Tempered glass shelf with a load capacity of 22lb
  • Color: high gloss black
  • The bracket can fit on almost any tv with a maximum vesa mount size of 400x380
  • This dvd mount bracket is designed-inch attach-inch the back of your tv in its vesa mount holes
Price :    $32.99
Model :    MI-8401
Quantity :    1
Order click here :    normally ships in 24 hours
Speakers :    Best Av Furniture (mount-it! product review) for Mount-It TV Wall Mount Shelf Bracket Under TV Cable Box, DVD Player, Stereo AV Components Shelf,Black available ( Jun 2019 )

Mount-It Tilt TV Wall Mount Bracket 40 - 80 inch LCD, LED, Plasma Flat Screen TV - Super-strength Load Capacity 220 lbs - 15 Degree Tilt Up & Down, Max VESA 850x450 FREE 6 ft HDMI cable

Mount-it! mi-303l heavy-duty tilting tv wall mount meets most of wall mounting needs in a simple and affordable design. It will safely secure your precious flat screen tv to any wall. It is one of our top selling tilting wall mounts. Don't risk your tv with the cheaper models! cheaper mounts use lower grade and thinner materials. Mi-303l is made from 2mm thick cold-rolled high-grade steel. Mi-303l is suitable for lcd, plasma or led tvs in sizes ranging from 40" to 70". Continuous tilt motion is possible without the use of tools. Tilting function improves viewing and reduces glare. Powder coated steel construction provides a sleek, high-tech look. Built in lateral shift. Includes complete hardware kit, integrated bubble level and installation instructions. Features: fits most of 40-70" led, lcd, plasma and oled tvs. Low profile of only 3 inches. Easy tilting angle adjustment with easy-to-turn adjustable tilt knobs. Wide open wall plate allows easy access to cables behind the tv and helps with installation. Heavy duty steel construction and high-tech welding technology.   specifications: tv size range: 40" - 70" (some even up to 75" depending on vesa bolting pattern and the tv weight). Max tv weight: 220 lbs. Mounting pattern: universal and up to vesa 850 x 450. Fits vesa 850x450, 800x400, 750x450, 700x400, 600x400, 600x300, 600x200, 400x400, 400x300, 400x200, 300x300, 300x200, 200x200, 200x100 mm. Mounting holes: up to 34" apart horizontally and 17. 7 vertically.

Mount-It Tilt TV Wall Mount Bracket 40 - 80 inch LCD, LED, Plasma Flat Screen TV - Super-strength Load Capacity 220 lbs - 15 Degree Tilt Up & Down, Max VESA 850x450 FREE 6 ft HDMI cableMount-Tilt-Wall-Mount-Bracket

MOUNT-IT TILT TV WALL MOUNT BRACKET 40 - 80 INCH LCD, LED, PLASMA FLAT SCREEN TV - SUPER-STRENGTH LOAD CAPACITY 220 LBS - 15 DEGREE TILT UP & DOWN, MAX VESA 850X450 FREE 6 FT HDMI CABLE Featured
Brand :    mount-it!
Color :    Black
Size :    40 - 80 inch
Model :    MI-303L/MI-303L_CBL
Quantity :    1
Order click here :    normally ships in 24 hours
Speakers :    Best Av Furniture (mount-it! product review) for Mount-It Tilt TV Wall Mount Bracket 40 - 80 inch LCD, LED, Plasma Flat Screen TV - Super-strength Load Capacity 220 lbs - 15 Degree Tilt Up & Down, Max VESA 850x450 FREE 6 ft HDMI cable available ( Jun 2019 )
Price :    $20.42 (was $36.99)
  • Fits 8", 16" or 24" studs. continuous tilt feature for better viewing angle and reduced glare. low-profile design ensures tv is close to the wall for a sleek finish. open plate design assures easy access to back of the tv and cables.
  • Safety screw ensures the tv is safely connected to the wall mounting plate, so you don't have to worry about accidentally knocking off the tv from the wall.
  • Universal tv wall mounting bracket design fits most of 40-70" lcd/led/plasma tvs on the market (even up to some 80 inch tvs) up to vesa 850x450 and 175lbs (fits vesa 850x450, 800x400, 750x450, 700x400, 600x400, 600x300, 600x200, 400x400, 400x300, 400x200, 300x300, 300x200, 200x200, 200x100 mm). please check vesa (mounting hole pattern behind tv), stud spacing, possible blocked cable/input and tv weight prior to making purchase decision to determine whether this tv wall mount fits your tv and the installation application. this wall mounting kit is compatible with samsung, sony, lg, sharp, insignia, vizio, haier, toshiba, sharp, element, tcl, westinghouse 40, 42, 47, 48, 49, 50, 52, 55, 60, 65, 70 inch tvs.
  • Quick and easy to install - bracket comes complete with full instructions, integrated bubble level and free installation hardware
  • Weight rated to 220 lbs - this bracket is one of the strongest brackets available on . install your precious tv with confidence. constructed from 2. 0 mm reinforced steel.

Medium Corner Duct Cable Raceway 1150 Series - 5 Feet - Black

Big size - definately will hold multiple cables. This one holds two hdmi, two usb, two rca, and three stero cables, with room for more

Perfect for commercial, industrial and residential environments, the corner duct cable raceway wedges neatly into any corner and hides unsightly cables running from the ceiling to the ground. This triangular channel comes standard with a pre-applied adhesive backing on two sides and includes a slide-on cover for easy access and installation. In individual orders, the corner duct cable raceway comes in white, and can be painted to blend into any room.

Medium Corner Duct Cable Raceway 1150 Series - 5 Feet - BlackMedium-Corner-Duct-Cable-Raceway

Medium Corner Duct Cable Raceway 1150 Series - 5 Feet - Black (Electriduct) FAQ.

I love this thing. It finally hid some hideous wires ii had going down the corner of my wall. Great quality and look. -Notice from E. Denise, New York

Click to Show medium corner duct cable raceway 1150 series - 5 feet - black (electriduct) Details

Used for running tv power and coaxial cable in corner. Straight and true. I painted to match the wall with latex paint. Coverage was fine but would scrape off with finger nail. Would be 5 stars but it is a pretty tight fit to slide the front piece into back piece. I would not feel comfortable doing so when it is on the wall in fear of pulling it down. So i ran the cords through then put it up.

Medium-corner-duct-cable-raceway-1150-series---5-feet---black-(electriduct) set picture

- D. AnonymousThese channels are perfect for keeping wires less noticeable along the wall. The top snaps on tightly so it holds the wires well.

It's good. Very white color and stick good to the wall

U. Nellie, Sandwell

MEDIUM CORNER DUCT CABLE RACEWAY 1150 SERIES - 5 FEET - BLACK Overview
Brand :    electriduct
Color :    Black
Size :    1 Stick
Weight :    0.50 pounds
Model :    4330219087
Quantity :    1
Order click here :    normally ships in 24 hours
Speakers :    Best Ce Accessory (electriduct product review) for Medium Corner Duct Cable Raceway 1150 Series - 5 Feet - Black available ( Jun 2019 )
Price :    $15.95
  • Can be painted with a latex based paint to help blend in with walls and ceilings
  • 1 stick - length of each stick: 5 feet - pre-installed adhesive backing
  • Manufactured of pvc, ul 94-vo compliant and flame retardant

Corner TV Wall Mount, UNHO Adjustable Dual-Arm Full Motion Swivel Tilt TV Bracket Fits 32 to 65 LED LCD Plasma Flat TV Screen Monitors VESA Max 600x400 110 lbs, TV Wall Bracket

Articulating full motion tv wall mount bracket for 32"-65" screen monitors specification: material: spcc cold rolled steel color: black size adjustable distant to wall: 75mm-420mm(2. 95-16. 54in) max adjustable mount length: 600mm(23. 62in) max adjustable mount width: 400mm(15. 75in) package size: 710*228*78mm weight: 5. 3kg tv weight capacity: 110 lbs fits tv screen size up to: 32'-65" tv screen adjustment angle: tilt 0 +15 distance from the wall: 2. 95 - 16. 54' vesa size range: (vesa) 50x50 75x75 100x100 100x200 200x200 200x300 300x300 300x400 400x400 400x500 400x600 package included: 1 x corner tv wall mount 1 x manual 1 (set) x screw fittings note: - the package provides the required mounting screw fittings. - the tv sizes recommended for this mount are provided as a guide only. The weight and the distance between the mounting holes on the back of your display are the main determining factors of whether this mount is compatible with your display. - your tv weight should not exceed 110lbs. Recommended for 32'-65' tvs. - please refer to the measurement. Tiny measuring error is allowable in normal range. - there might be a little color difference due to the monitor, camera or other factors, please refer to the physical item. If you have any question, before leaving the feedback, pls contact us. Any problems, pls contact us firstly before leave negative feedback or claim a-to-z. We would love to resolve the issue for you! if you are satiafied with our service , please leave us a positive feedback , it is very important for us, thanks for your support.

Corner TV Wall Mount, UNHO Adjustable Dual-Arm Full Motion Swivel Tilt TV Bracket Fits 32 to 65 LED LCD Plasma Flat TV Screen Monitors VESA Max 600x400 110 lbs, TV Wall BracketAdjustable-Dual-Arm-Bracket-Monitors-600x400

CORNER TV WALL MOUNT, UNHO ADJUSTABLE DUAL-ARM FULL MOTION SWIVEL TILT TV BRACKET FITS 32 TO 65 LED LCD PLASMA FLAT TV SCREEN MONITORS VESA MAX 600X400 110 LBS, TV WALL BRACKET Pros
Brand :    unho
Color :    U-500A
Quantity :    1
Order click here :    normally ships in 2-3 business days
Speakers :    Best Av Furniture (unho product review) for Corner TV Wall Mount, UNHO Adjustable Dual-Arm Full Motion Swivel Tilt TV Bracket Fits 32 to 65 LED LCD Plasma Flat TV Screen Monitors VESA Max 600x400 110 lbs, TV Wall Bracket available ( Jun 2019 )
Price :    $43.94 (was $52.79)
  • Discussion on the angle problem of wall surface: please check the angle of the wall fit which one, when the angle of the wall is 100 degrees 180 degrees, this unho tv mount can be supported 32" to 65". when the angle of the wall is 90 degrees 100 degrees, this interval is partly supported 32" to 65".
  • Adjustable optimal viewing: quickly and easily tilts down 15 and swivel 90 help you to get the best viewing angles and reduced screen glare, low profile tilting, swivel and articulate design, retracts to 2. 95" and extends 16. 54" from the wall to save space.
  • Heavy duty corner mount: this unique dual articulating arm wall mount is specifically ideal for corner installation, dual arms can be installed on separate adjacent walls or one same flat walls to fit in any corner, angled walls or single flat wall, giving you the best flexibility to place your tv anywhere on the wall.
  • Super safe & strong: simple 3-step installation, swivel tv corner mount comes with full fittings and clear instructions, suitable for wood brick, wood or concrete walls and can be installed easily by one person. made of cold rolled steel, this adjustable corner tv mount supports up to 110lbs weight capacity, dual arms design makes the whole unit more sturdy and prevent sagging, making it one of the most strongest mount you can trust, 100% lifetime manufacturer warranty, ul certified.
  • Universal tv mount: fits for most 32-65 inch tvs, our tilt corner tv mount compatible with vesa 600x400; 400x400; 300x300; 200x200; 200x100; 100x100mm(mounting hole pattern behind tv), suitable for lg samsung sony finlux sanyo toshiba panasonic philips sharp emerson .

InstallerParts Corner TV Wall Mount Most 23 -55 LED LCD Plasma Flat Screen Monitor up to 132 lb VESA 400x400 Full Motion Swivel Articulating Dual Arm, HDMI Cable

Compatibility installerparts flat tv wall mount is designed to fit televisions of all brands, including samsung, lg, sony, vizio, toshiba, insignia, sharp, and any other hdtv sets between 23" to 55". Where can you use our corner tv mount? this mount is perfect for installation in your living room, family room, garage, or fitness area or in commercial settings such as a bar, restaurant, fitness center, waiting area, dentist office, doctors office and any other area where two walls come together. Product features heavy duty swivel and tilt lcd/led flat screen tv mounting bracket. Tilts up to 3 up and 12 down and swivels 60 in either direction, which results in a wide range of motion for maximum flexibility. The distance from the wall to the tv mount is shortest at 5" (125mm) and extends to 20" (515mm), permitting you to adjust the tv to your desired height. Will my tv fit? this tv wall mount fits most 23"-55"; lcd/led flat panels up to 132lbs (60kg). Supported screen size is shown as a guidance. Please check bracket dimensions and make sure overall bracket size does not exceed tv. Our plasma tv mount meets vesa mounting interface standards (mis). Vesa is an international nonprofit that supports and sets industry standards for the pc workstation and consumer electronic industries. The led tv mount comes with full mounting hardware included and a slide-in vesa plate can be taken off for a quick and easy install. Product specifications: brand: installerparts tv size: 23"-55" wall to tv: 5" to 20" (125mm to 515mm) tilt angle: 3 up and 12 down swivel: 60 either direction weight capacity: 132lbs (60kg) vesa compatibility: 100x100mm to 400x400mm color: black free hdmi cable included in box

InstallerParts Corner TV Wall Mount Most 23 -55 LED LCD Plasma Flat Screen Monitor up to 132 lb VESA 400x400 Full Motion Swivel Articulating Dual Arm, HDMI CableInstallerParts-Corner-Monitor-400x400-Articulating

INSTALLERPARTS CORNER TV WALL MOUNT MOST 23 -55 LED LCD PLASMA FLAT SCREEN MONITOR UP TO 132 LB VESA 400X400 FULL MOTION SWIVEL ARTICULATING DUAL ARM, HDMI CABLE Featured
Brand :    installerparts
Color :    Black
  • Easy installment: standard hardware required to fasten your lcd led or plasma tv to your corner mount, comprehensive product installation manual and free hdmi cable included.
  • Universal corner mount: fits most 23 to 55 inch flat panel displays up to 130lbs (60kg)
  • Vesa compliant: our tv mount meets vesa mounting interface standards (mis) and is compatible with mounting hole patterns from 100x100 to 400x400
  • Design: made with solid toughened steel construction and a durable scratch resistant finish.
  • Swivel & tilt: swivels 60 in either direction and tilts 3 upwards and 12 downwards.
Price :    $43.99 (was $69.99)
Model :    FBA_11180
Quantity :    1
Order click here :    normally ships in 24 hours
Ce :    Best Consumer Electronics (installerparts product review) for InstallerParts Corner TV Wall Mount Most 23 -55 LED LCD Plasma Flat Screen Monitor up to 132 lb VESA 400x400 Full Motion Swivel Articulating Dual Arm, HDMI Cable available ( Jun 2019 )

Legrand - Wiremold C4050 Home Entertainment Cord Cover Kit

The wire mold home entertainment cord cover kit puts audio, video, and power cables and cords out of sight quickly and easily. Just use the self-adhesive backing to fit the kit into corners. You can paint and stain this kit so that it blends into your room, and the stylish design complements any decor.

Legrand - Wiremold C4050 Home Entertainment Cord Cover KitLegrand-Wiremold-C4050-Entertainment-CoverThe wiremold home entertainment cord cover kit puts audio, video, and power cables and cords out of sight quickly and easily. Just use the self-adhesive backing to fit the kit into corners. You can paint and stain this kit so that it blends into your room, and the stylish design complements any decor.

LEGRAND - WIREMOLD C4050 HOME ENTERTAINMENT CORD COVER KIT Highlight
Price :    $17.70 (was $23.78)
  • Readily fits into room corners
  • Paint or stain to match your room's color
  • Space-saving concealer of your cables and wires
  • 4-48" sections of cord mate ii 3-48" sections of corner mate 2 cord mate ii transition fittings 2 cord mate ii couplings
  • Simple self-adhesive backing
Brand :    wiremold
Color :    White
Size :    1 Pack
Weight :    2.95 pounds
Model :    C4050
Quantity :    1
Order click here :    normally ships in 24 hours
Home Improvement :    Best Hardware (wiremold product review) for Legrand - Wiremold C4050 Home Entertainment Cord Cover Kit available ( Jun 2019 )

Impact Mounts Corner TV Wall Mount Plasma, LCD, LED TVs 37 -63 37 40 42 46 47 50 55 60 63 Full Motion Articulate Articulating Tilts Swivels

This awesome dual-arm articulating wall mount will be perfect for tvs up to 63 inches, 80lbs. Unique two wall plates specially designs for corner installation. Full motion allows maximum flexibility - tilts and swivel your tv for easy viewing from any seat in a room. Post-installation level adjustment allows the tv to "roll" up to 5? clockwise and counterclockwise to ensure it is perfectly level. Compatible with vesa hole up to 600x400

Impact Mounts Corner TV Wall Mount Plasma, LCD, LED TVs 37 -63 37 40 42 46 47 50 55 60 63 Full Motion Articulate Articulating Tilts SwivelsImpact-Mounts-Articulate-Articulating-Swivels

IMPACT MOUNTS CORNER TV WALL MOUNT PLASMA, LCD, LED TVS 37 -63 37 40 42 46 47 50 55 60 63 FULL MOTION ARTICULATE ARTICULATING TILTS SWIVELS Advantage
Brand :    impact mounts
Color :    Matte Black
Weight :    16.00 pounds
Model :    IM-484C
Quantity :    1
Order click here :    normally ships in 1-2 business days
Speakers :    Best Ce Accessory (impact mounts product review) for Impact Mounts Corner TV Wall Mount Plasma, LCD, LED TVs 37 -63 37 40 42 46 47 50 55 60 63 Full Motion Articulate Articulating Tilts Swivels available ( Jun 2019 )
Price :    $49.99
  • Installed bubble level. lockable for theft prevention. padlock not included. package weight 16lbs
  • Unique dual wall plate designed especially for corners. can also be used for flat walls
  • Arm extension: 125 515mm (5 20")
  • Tilt: -15 +15 up and down, swivel (side to side): 60
  • Universally fits most lcd led and plasma tvs from 37-63" up to 80lbs (max vesa 600x400)

mount-it mi-484c articulating corner mount for tv premium swivel full motion wall bracket for 37-63 inch screen lcd oled plasma 4k flat panel screens vesa up to 800x400, 132 lb capacity, black Price : 55, was : 59 as 2018-11-20
USUKDEFRESITJPCNCAGlobal
United States
Great Britain
German
France
Spain
Italy
Japan
China
Canada
World Wide
Mount Mi 484c Articulating Premium Capacity (Mount It) Reviewed by on puqus.com

Top mount mi 484c articulating premium capacity (mount it) Content

The F.A.Q. for mount-it mi-484c articulating corner mount for tv premium swivel full motion wall bracket for 37-63 inch screen lcd oled plasma 4k flat panel screens vesa up to 800x400, 132 lb capacity, black

Just purchased this beast for a friend and we installed a 55 samsung 4k curve a few days ago. Here are some mounting tips. . The mount will probably weigh twice as much as the tv you are hanging so try and convince a handy friend to stop over for some huck-finn fun. The directions in the box are more or less a complete joke unless you are one of the millions and millons of homeowners with concrete walls as the mounting arms/plates are 8"x8" with three holes top and bottom. Know any wall studs like that? i have no idea if they think anyone would actually use one lag bolt (top and bottom) on each arm to "hang-dangle" their expensive purchase from but i am not the daring type. Plus, if you use a stud finder or understand wall construction, you would find that the center of the studs won't be the same distance from the corner and then the arms will be of different length, making you kink/bend one arm to accomodate the offset and then you get closer to the corner and that may make the tv touch the wall. So, plan on a trip to the store to buy a board at least 8" wide and whatever distance it is to overlap the two studs on each side, ours happened to be 29" and 30" (because his wall didn't have 16" on center studs) which added to the fun. . Once you figure out how high to mount the boards in the corner, its pretty easy sledding and don't get too fussy about being perfectly level as there is plenty of wiggle room later. Use at least 3 1/2" lag bolts to mount the boards. We measured out 18" inches from the corner and made that the inside edge of the mounting plate and it also extended the arms to perfectly straight so we had max distance from the corner. I used (4) 1 1/2" lag bolts on each arm plate and, keep in mind, the little level on the front of the mount may give you a false reading as that whole thing can be rotated and, probably was while you were wrestling with this thing. So, if your mount boards are "level" mount it and it will all work out after you hang the tv, trust the melon on this one. . We didn't have to use any adjusters to mount the long brackets on the back of the tv, just two different size bolts and it was a piece of cake. A minute later it was hanging and then you can rotate the whole tv to level and slide it side to side to make it perfect. Make sure you tighten the lock screws on the back of the long brackets so your investment will never get knocked off. Good luck!

A number of questions have been asked here.

Showing 20 Q&A on Mount-MI-484C-Articulating-Premium-Capacity

(0) Question: Will this work with the vizio e320-b0 32-inch 720p 60hz led tv


(1) Question: How far apart are the mounting holes that attach to the tv?


(2) Question: The corner that i am looking at has studs on the left wall at 4 1/2" & 16 1/2", and the right wall has studs at 3 1/2" & 10". will the brackets work?


(3) Question: Will this bracket mount a 60" vizio in the corner of a finished basement that has studs that are 24" out from the corner?


(4) Question: Is it possible to rotate the plate that attached to tv to make it 100x200? (as opposed to 200x100)? thanks.


(5) Question: Does it have leveling rotation or does mounting the bracket have to be perfect?


(6) Question: Will this work for the 55 inch lg oled curved 1080 2015 model


(7) Question: How do i make it so i get the maximum extension, do i keep the mounting brackets close together?


(8) Question: Will this mount fit tcl 55s405 55-inch 4k ultra hd roku smart led tv (2017 model)


(9) Question: The item weight says "49. 1 pounds" but the shipping weight says "26 pounds", can anyone verify which is correct.


(10) Question: Does it hold a 70 inch tv sharp aquos


(11) Question: With a 60 inch tv is there any room to swivel side to side ?


(12) Question: Once mounted, can i take the tv off as needed.


(13) Question: Is this bracket compatible with 300x300 vesa mounting pattern? my visio e-55 c1 uses the 300x300 vesa pattern.


(14) Question: What is the length & width of those huge bolts? i need a super long drill bit.


(15) Question: I have a 42" panasonic plasma that i want to corner mount. will this item work?


(16) Question: I need a bracket that will allow a 60 inch tv to rotate 90 degrees. will this bracket work?



(note) Question: where/how to get Mount It (manufacturer's brand) accessories & similiar Mount It's products

Click to Show/Hide the Answer
Answer:

Click on the marked text to copy to Clipboard

Great corner wall mount. Some of the flat wall mounts look a little frail, but this thing is sturdy and heavy. I had concerns with mounting my slightly heavier 42" panasonic viera plasma television in a corner, but seeing this mount and feeling it washed away all doubts about it. When secured properly, your television should go no where. I do have a small gripe, but its an easily fixed one. I was mounting the panasonic which feels heavier than my newer flat screen hd's so i didn't trust the little (diameter wise) screws that came with it. I went to home depot and bought some longer heavy duty screws for the wall and bolts for the plate to connect to the television. Installation was a little tricky with one person so i had help, but it works great and i even have room to pull the television out more if i wanted to.


Accessories & Supplies 704182, Audio & Video Accessories 235271, Electronics 282271, TV Accessories & Parts 466271, TV Ceiling & Wall Mounts 697067Top Mount Mi 484c Articulating Premium Capacity (Mount It) FAQ Content

Best mount mi 484c articulating premium capacity (mount it) in review

Mount is strong and i feel confident holding my samsung 55" led. I owned a wall mount for this tv already, but because i was moving the tv into a corner i wanted a different style with more stability as it was going in my game room. My biggest complaint about this mount is that it i had to use the outermost holes. I didn't like this because once i hang the bracket i wasn't going to be able to adjust the tv up or down. What i did was make a template out of cardboard (pictured). You can see from the template that the bracket is at its most outer holes for my tv. This means no up/down adjustment. The add say holds up to a 63", but i wouldn't buy this for over a 55" unless you measure your mounting hole ahead of time. I attached some pictures you can see what it looks like when mounted in a corner and what the tv looks like when done. Bracket is made well with good quality material. I like the tilt feature. This allowed me to mount the tv a little higher and angle down. As with most wall mounts, do not use the wall hardware or anchors. Go get more durable mounting hardware. Hope this helps.

A. Josephine, North Tyneside

You might like to see Tv Wall Mount Shelf Bracket Under Tv Cable Box, Dvd Player, Stereo Av Components This Dvd Mount Bracket Is Designed-inch Attach-inch The Back Of Your Tv In Its Vesa Mount Holes. The Unit Has A Smoked Tempered Glass Shelf That Can Be Placed Above Or Below The Tv-inch -Mount-it Tv Wall Mount Shelf Bracket Under Tv Cable Box, Dvd Player, Stereo Av Components Shelf,black
  1. Reviews: This Dvd Mount Bracket Is Designed-inch Attach-inch The Back Of Your Tv In Its Vesa Mount Holes.
  2. Reviews: The Bracket Can Fit On Almost Any Tv With A Maximum Vesa Mount Size Of 400x380.
Price Fall Mount Bracket Player Stereo Components (Av Furniture) Mi 8401 Mount Bracket Player Stereo Components (Mount
Or you might like to consider Electronics Un55mu6490 Curved 55-inch 4k Ultra Hd Smart Led Tv 2017 The Samsung Mu6490 Curved Ultra Hdtv Redefines The Viewing Experience By Producing A Colorful High Dynamic Range (hdr) Picture. Our New Smart Tv User-interface (ui) Provides Faster -Samsung Electronics Un55mu6490 Curved 55-inch 4k Ultra Hd Smart Led Tv 2017 Model
  1. Listed: See Vibrant And Clear Color For An Experience Beyond Hd.
  2. Listed: Get Smooth Action On Fast-moving Content With Motion Rate 120.
Bargain Samsung Electronics Un55mu6490 Curved 55 Inch (Television) Un55mu6490fxza Samsung Electronics Un55mu6490 Curved 55 Inch

O. Cassella, Utah says

I've used the mount-it! mi-484c articulating corner mount for tv premium swivel full motion wall bracket for 37-63 inch screen lcd oled plasma 4k flat panel screens vesa up to 800x400, 132 lb capacity, black to mount our 2017 sony 65 inch, 50lb tv in the corner of our room. This works well with about 6 inches of clearance either side of the tv with both arms of the mount at near full extension allowing for both left / right lateral movement and tilt. - for a standard installation to the wall i'm guessing there would only be an inch of so of clearance. A couple of bolts at the left and right of the central pivot were tightened once the mount was leveled using the built in level to retard any left / right rotation. After hanging the tv onto the mount and centering it, only very slight adjustment was necessary using an external level across the top of the tv. Everything seems to be nicely secure. . I found the instructions that came with the mount are adequate, but for my older eyes difficult to read given the tiny printing used in places. . Our installation:. As we weren't sure whether there would be sufficient space for a 65" tv, we elected to install some 10x2 to the walls that was lag bolted into studs. The mount was then installed onto these 10x2's using the 6 supplied lag bolts / washers. My original thought for this was that it would position the tv a little further out just in case the 65 inch tv would not fit when mounting to the wall, and more importantly that the mount would be in a more secure position given that an ac duct is behind one of the walls.

Y. Emma, East Riding of Yorkshire

These hinges are tight right now, messed with it on the floor first. I like the way the tv moves and the tilt locks. I've got two screws on each side in the studs, the other two just in the 1/2 x 8" tounge in groove pine. Why six screws included instead of eight? not a problem for one guy to do this job! our tv screen is firmly three feet up in the air now.

B. Meghan, Poitou-Charentes says

I bought this to go with my lg 42" led tv. I would like to recommend this for larger tv's 50+ inches. This if mainly due to the size and weight of the mount overall. Size wise on my 42" there was roughly 2 inches on both sides when centered on the bracket, i tried sliding it over for better positioning but the side would start to protrude and wasn't very pleasing to see. Weight wise it was more than my tv weighed + 5lbs, i could understand this for larger tv's as i have a 60" in my living room with the non articulating variant of this and love the heft and durability. The only other complaint i had was the bars that mount on the tv itself were fairly tall there was only one or two positions that i could set it with out seeing them above or below the tv. On the upside it is incredibly well built and sturdy, very nicely packaged with all possible bolts and anchoring screws included nicely. You have to also be careful of the cable layout of your tv as this blocked the lan port and cable jack on the center of mine. I would definitely recommend this for for larger/heavier tv's above 48-50" but for lower 40's it limits your mounting and positioning options.

U. Edna, Hawaii

I felt the need to add a five star review to counteract the handful of bad reviews on this product. . I will list the two negatives first:. 1. I will admit that the instructions are not what an average use needs, so find the other review that gave more detailed instructions if you're confused! . 2. Only having 6 wall mount screws is ridiculous. Will 6 hold it if properly installed and used within the weight and size restrictions? absolutely. Do only having 6 wall mount screws when you could easily have 8 or 12 instill confidence in the average user? absolutely not. Add a few extra screws for peace of mind! . . Other than that, i love this thing. The mount articulates very well from side to side, the included level is great, and the entire thing just feels sturdy. I mounted a 7 year old 42" plasma (heavier than your average modern 55" oled) and i didn't notice any bending in any part of the mount. It is also awesome that it comes completely assembled so all you had to do is install the tv rails and screw the mount into the wall! i will try to update this once i get a 55" tv on it in the next few months. If you don't see an update, assume that it still hasn't fallen off the wall!

V. Terry, Poole says

It's very sturdy and worked out perfectly for my 65" samsung.

. Whiteman, Worcestershire

I mounted a 60" tv vizio in corner with this. Worked great. The instructions that are included specifically say can only fit a tv that is 63" wide. I would have to agree with this. No idea how a 65" or larger tv would work with this mount. I have mine mounted on plywood behind for better support and with a 60" tv i only have maybe 1" on each side of tv to work with. . Seems sturdy and well built. I did entire mounting and hanging on my own. So not sure why it requires two people. I did take mount apart to make it easier to hang. Turned out great and looks awesome with tv mounted. Can't see the mount once hung.

J. Campbell, District of Columbia says

Installation is not difficult, but here are my tips. The instructions are to install the monitor brackets to the tv first. Follow this step and note the centerline of the tilt hinge pins to help determine where to install the mounting bracket. (i did not and needed to move my mounting bracket). The mounting bracket consists of a wall bracket, articulating arm, and a tv bracket. I removed the wall bracket from the articulating arm which made installation to the wall easier. Re-installing the arm to the wall bracket may require two and the arm will need to be juggled to get the bracket pin lined up with the hinges. You will want to level the wall bracket, but there is also level adjustments on the tv bracket which is not mentioned in the manufacturer instructions. I happened to notice this because the wall bracket was level and the tv bracket obviously was not. There are 4 bolts attaching the tv bracket to the articulating arm that i used for adjusting level.

E. Julie, Newcastle upon Tyne

So the most confusing part about this little contraption, other than articulating being in the title, is that the instructions that are included with it only tell you how to install it to brick or masonry. Why is this, you ask? does mount-it! inc. Think that everyone who owns a flat screen tv lives in the land of the 3 little pigs and a big bad wolf is coming to blow their house down? did they simply decide to build a product that only 1 in 100 us homeowners could use? do they thumb their turned up cheeky noses at the inventors of sheetrock? most likely they have found a clever way to clear themselves of any and all liability if and when their product is installed incorrectly. End of story. If installed correctly on sheetrock this thing is going nowhere. . To install on sheetrock, simply use a stud finder to locate your studs, ideally you want the ones closest to the corner, in standard construction these will probably by about 6-10" from the corner give or take. Use the stud finder to locate the end points of each stud and then mark the center. For best results you want to get your bolts as close to the center of the stud as possible. The mount includes 3 lag bolts for each plate of the mount. Each. Plate is only 8" wide. So you are probably saying to yourself, tom, my studs are 16" apart how am i going to get the other lag bolt into a stud? the answer is simple; you don't have to. 2 of the lag bolts( top and bottom) will hit the stud. Ideally these 2 will be as close to the arm as you can get them. This will carry 99% of the load. For the 3rd one simply use the masonry/drywall anchor that they include. Again if you install the anchor correctly you should get impact, but even if you don't its not the end of the world. Word to the wise, have a 2nd person help you put this up. You can do it with one but you'll be hating life and getting it level is a pita.

C. Pamela, Suffolk says

I purchased this mount to wall mount a 55" vizio hdtv. The mount is very well made and feels completely solid. Attaching it to the wall can be done with one person, but i wouldn't recommend it. As it was, i had a bit of help from my wife for marking the location for the lag screws as well as starting the lab screws while i held the mount up. Once the screws are started, it is easy enough to let the mount hang while the screws are tightened. The instructions indicate that the mount must be installed into two studs. More on that later. Once installed, it feels rock solid, and i am able to rotate the 55" tv to be perpendicular to the wall in either direction. Moving the tv is not super simple, but with a little practice, it seems like it won't be too much of a hassle. As others have reported, pushing the tv back against the wall takes some guiding of the articulated arm so that it folds properly. I find that this manipulation does not take long and is therefore not a problem, even though we swivel the tv pretty often (that said, the tv has been mounted for less than a week). I have noticed no sag whatsoever in the arm even when the tv is fully extended away from the wall. Of course, the mount is rated for over 200 pounds, and the tv is only 35 pounds, so ymmv. I installed a wall box for the outlet and cables which i ran through the wall. This required that i put some washers between the mount and the wall to allow space for the wall box, but was not difficult to do. The hole in the middle of the mount allowed plenty of space to run the cables and access the plugs for power and ethernet that are in the wall box. I ziptied the cables and power cord to the top and bottom of the wall side arm and used rubber bands to take up the slack when the arms are fully folded so that the cables don't hang below the tv, but are also able to fully extend without putting strain on the cables. A couple of points to note:. 1) i read several reviews that said the included lag screws broke on installation, and the screws included with the mount felt lightweight and cheap, so i went ahead and bought some lag screws from home depot for $4 so i could be confident that they would not break. For such a low price, it seemed like easy insurance against having a screw break. 2) the little level that is part of the mount seemed like a great idea. Until i had mounted the tv and realized that it was not, in fact, level, despite the bubble being perfectly centered between the two lines. My bad for trusting the included level, but also a little disappointing. Obviously this can be avoided by double checking with an accurate level. . Overall i am happy with the mount and would certainly recommend it. For the price it does everything i want it to (especially the full swivel) and was about half the price of comparable fully articulating mounts i had researched.

. Veronica, City of Bristol

Mounted an expensive 4k television in a corner of my secret lab with this mount. The tv cost a fortune and i wanted something robust for fear of it falling off the wall and wrecking my tv budget. This mount is rock solid and does the job just fine. . This mount isn't for sissies. It is pretty heavy gauge steel and weighs quite a bit. I managed to install it by myself, but it would have been much easier with a helper. Even though it is a corner mount, it still articulates left and right and you can slide the television left and right on the mount itself if needed for precise centering. . I think an 8 year old wrote the instructions but won't hurt that kid's feelings by deducting a star. The instructions only cover block or concrete wall installation. Be sure to measure out 16" to the next stud from the corner and user appropriately sized lag bolts for your installation.

T. Shayna, Enfield says

I would've given this 4 stars due to the lack of instructions for anything other than concrete walls, but i feel like anyone who's purchasing this specific product knows what they're in for. My previous experience consists of traditional wall mounts, and the only thing different here was that i had to deal with having to balance this thing from time to time, as well as purchasing separate anchors from the hardware store (as other reviews have mentioned, just as a feel-good measure). . If you have the time, you can definitely do this on your own if you're so inclined. The hardest part was balancing it while i was doing the staging and marking for positions on the wall. After that, i pre-drilled the anchor holes and it made setting the anchors a breeze. . The device itself has great build quality and even has the ability to adjust the axis it sits on, just in case you're not as square as you thought you were. :-)

Q. Powell, West Virginia says

Excellent corner tv mount. I mounted this to a wall with drywall with the lag bolt supplied. If you do this make sure you mount it in the studs. I did a layout on the wall and removed the arms for installation. I was able to install this in about an hour by myself. I only have a 40" tv hanging on it but you could safely go bigger mounting it this way as long as it is an lcd or led tv since they don't weigh much. Also make sure you pre-drill the holes to avoid splitting the stud which will lead to an epic fail at some point.

I. Valencia, North Dakota

Well, its been 6 months and my tv hasnt fallen yet so im happy. . I've never mounted a tv before or even owned a power tool, so i was hesitant about installing this myself. I cant recall anymore but i believe i used the included hardware. Bought a drill and bit the size of the root, worked out where to put it, pre drilled the studs, screwed it in place (2 directly under each hinge) and hung the tv. So far so good, i check in on it every so often and it feels as solid as the day i put it up. . One thing to note, as others have pointed out but i still failed to realize until installing it. Its not designed to be put up in pieces so its all at once and can be quite heavy to hold extended in front of you, let alone trying to screw it in at the same time so you'll need a friend to help. In hindsight i may choose something a little easier that can disassemble so you can install the mounting plate then the swing arm then the tv, but for the price this was really hard to pass up. . Btw, the instructions only tell you how to mount it into concrete so be prepared to do some research before install if your like me and havnet done this before.

S. Lewis, Nebraska says

Bought this after reading reviews. The price was very good. As mentioned in other reviews, this unit comes with hardware to mount it to a concrete or block/brick wall. I bought this to hang a 50" lg led tv, so the weight was not a factor for me. I located one wall stud for each bracket. One of the wall studs locations put it on the end of the bracket furthest from the pivot arm. I simply unbolted the bracket and flipped it around so both brackets were mounted to a stud directly at the area where the pivot arms bolt to the brackets. The only downside to this unit that i don't feel should take away a star is the access to the connections in the back. I had to plug my power cord into the back before mounting it because the bracket blocks the cord connection. The other connections are not very easy to get to, but not impossible. I'm not planning on needing to plug and unplug anything repeatedly, so i am fine with it. Very strong unit, and i'm glad i went with this one. If you are mounting this to drywall covered interior walls, make sure to locate a stud for each. It would probably be ok with some heavy duty drywall zipit anchors placed properly, but that also depends on how much your tv weighs.

M. Gloria, Berlin

Great product, heavy duty steel and all the harware you'll need. Makes my tiny living room feel much more open and room to mount my massive sat box behind it. I love it. Built a little shelf for the ps4 underneath. 55" vizio

W. Palmer, Nottingham says

Great wall bracket. This bracket was able to support my 75 in. Lg 4k television. My television weighs 105 pounds. This bracket can support larger televisions than what's stated. As long as your television is below the weight listed on the bracket, you are good to go. Also make sure your television and the bracket have the same wall mount configurations, mine is vesa 600 x 400. I hope this review helps someone.

D. Rowe, Arkansas

I just installed this mount two days ago. As other reviewers have mentioned, this is a two person job because the mount is heavy and awkward to handle and mark hardware locations with just one person. Also, as others said, the instructions are less than poor, so if you do not have experience with tv wall mounts or not considered an average "handy man", i would not recommend this product. . This mount is ideal for just about any stud location in your home. My studs were located at 11" and 16" from the corner where i wanted to mount my tv, and the movement/flexibility of the independent arms was just what i needed. . My only complaint, which is why it's 4 star and not 5 star rating, is that the hardware that it came did not seem robust enough for me to trust holding my 50" tv. I went and purchased 5/16" by 2 1/2" lag bolts (hex head) with washers, which fit perfectly into the pre-made slots. Following other reviews, i wanted to get 3 mounting bolts in each bracket, so for the third location in each bracket i used an ez dry wall anchor capable of 75 lb load. Make sure to buy the 'fender' washer that will work with the included screw in the dry wall anchor kit, as the head alone is too small of a diameter to catch the bracket. . I hope this mount holds up over time, and so far it looks like it was very much worth the money and will serve its purpose well.

Z. Olga, Mississippi says

Fit perfect in the corner. Came preassembled which was nice and cut down on the installation time. Free things you should know, this thing is heavy! i wad able to install myself, but it was not easy due to the weight, i would definitely get dine one to help hold it while it is anchored to the wall. While we are talking about anchoring to the wall, instructions do not specify to attach to a stud. It even comes with plastic anchors that make you think it can be attached to just the sheet rock. In the words of general akbar, "it's a trap! " there is no way sheetrock can hold this mount and a tv. Other than the instructions being a waste of paper and ink, this mount is very solid and my 55" vizio looks great, and we now habe a lot more room

X. Alice, Lewisham

We had to buy different mounting hardware because we hung up our tv and the bolts were coming out of the wall and our tv isn't as heavy as the max weight. Not a huge deal, just went back to the home improvement store to get stronger hardware for it. I had a feeling we were going to have to do that because of the different reviews i read. Still a good purchase for the price!



Top mountit articulating corner mount Review

Disadvantage and Critical reviews

M. Debra, Auvergne says

I installed this on wooden studs with a 50" plasma weighing about 100 lbs. . I was able to install it myself taking about 30-45 minutes. It was a huge pain because this is an awkward mount; with that said most people will have two people and that would be much easier. But, it can be done by one person. . The swivels are very tight. Once one gets locked it place it is very difficult to adjust it. This is compounded by the fact that there are two swivels; adjusting one takes so much force you end up adjusting the other one by accident. That was a rinse & repeat process for about 5 minutes to get it just right. . I originally had a 42" lcd and this mount was great for that. I upgraded to a 50" plasma which is really too heavy for this mount. I have a strong tilt going on that i cannot remedy. It really lowers my satisfaction level with this product. . While the mount does its job, it is difficult to install; structurally it supports the weight limits it presents, however it has a big tilt on a heavy tv. I would not purchase this product again if i was looking for another corner mount.

G. Josephine, Aquitaine

This this was horrible to install. Each bracket was very uneven and not close to being level, although the part where the tv mounts was level. Without the tv mounted on the brackets both of the pieces that mount to the wall were very crooked. The bubble read level so i went with it. I can stand knowing the mounts are uneven even though the tv is level. I would not buy this again.

O. Anonymous, Lincolnshire says

This thing came with a sheet that was supposed to be instructions, but it was useless and didn t help much. -1 star for that. The mounting hardware that it came with was super questionable, it came with drywall anchors and some really weak looking lag bolts. Will probably go buy some bolts at the store to replace long term. -1 point for that given the price of this mount. I have a lot of cheaper mounts that came with much better hardware. . Overall the mount itself seems very sturdy and solid, impressed by that. Mounting this is definately a 2 person job, having 3 might even be helpful. I found that mounting one side first allowed me to more easily mark holes for the second side (and the mount had no trouble supporting itself with only one side in and no tv). The built in level was nice and the tilt/rotate were great. . I have bought 4 different tv mounts, although this is my first corner mount, this one by far had the worst instructions and hardware out of all of them. It was also the most challenging to mount. If i did it over i would definitely choose a different brand and probably just get an articulating arm style.

X. Irene, Sheffield

Unfortunately, this product doesn't mention in the details that the wall mounting hardware it comes with is for concrete or brick walls. If you are trying to mount this into drywall, i strongly suggest you buy specific drywall anchors to additionally add the support this mount needs. If you are fortunate to have a stud in the corner area you plan to mount it, you still may want to think about getting additional anchors. Also, it takes at least two people to put this mount onto the wall. In order to get it level, i found it easier to just take the legs of the mount apart and mount them separately after the spots were marked. It also made drilling and screwing the mount plates into the wall easier with out the rest of the mount in the way. The mount is a great way to clear off some counter space, especially in corners where space can be tight. All in all it's a good product.

Q. Emily, British Columbia says

No instructions for install. Adjustment for tilt not very good. As tight as i can make it and screen will still droop forward.

W. Jacqueline, Massachusetts

Unless you know how to use tools, water level, stud finder, lag bolts, etc. Don't try to install this tv mount yourself. At best this mount is useful only for occasionally moving the tv away from the wall to gain access to the back. Due to the torque the tv places on the extension arms the tv won't stay level in the extended position. If you level the tv in the extended position it's not level when you move it back against the wall. You get what you pay for, so for the price it's ok. However if you are looking for an "articulating" wall mount the moves easily and stays level, this one isn't it. Look at the peerless mounts, they're expensive but work flawlessly. Good luck.

L. Nielsen, Oregon says

As others have said, the instructions included are laughably lacking. Also as others have said, i replaced the wall mount hardware with 5/16" steel lag bolts. Make sure to put at least two of the three wall bracket bolts into the studs. . That said, my 55" samsung does cause some of the linkage to sag a few degrees. The tv can't weigh more than 30lbs, and even with the linkage retracted most of the way, it still sags a bit. Not worried about it falling, but i was still a bit disappointed. Wouldn't want to see how a heavier, larger tv would hang on this linkage.

Z. Colleen, Islington

For the price i would assume it would come with the parts required to mount. Needed to go to the hardware store for correct anchors, and extra screws.

J. Erin, Derby says

I used this to mount a tv in the corner of our living room. It is very sturdy and heavy. It didn't come with screws that worked with my samsung tv, so, i needed to make a trip the hardware store for that. Also, the mounting hardware is only for outdoors into a block wall - not really helpful either. Probably the most frustrating thin however is that it's impossible to get the tv to be level because their is play in the adjustment mechanisms.

T. Lara, Leicester

The product itself is sold and well built and works excellent for corner mounting televisions. My biggest gripe would be the fact it is advertised as it mounts tvs up to 70", but when i received the package, the box states up to only 63". Not a big deal as i was using on a 60", but a fair warning for those with bigger screens.

D. Michele, East Riding of Yorkshire says

Overall it is what it says that it is, a pull out wall mount for a tv. Installation was relatively easy but putting the tv on was a pain. The instructions expect you to have someone hold the tv up and someone else attach the 4 screws to the back plate which is supposed to be already attached to the arm. I found it easier to attach the back plate to the tv and then hold it up and have someone install the bolt to attach the back plate to the arm instead. The plastic cover is good in theory to help manage the cables but don't expect to put more than 1-2 cables in there because they just won't fit. The other big issue i have with this is that it only has 1 knob to control tilt and rotation. So if you move the tv around much you will likely have to re-level it each time. In short, it does what it is supposed to but not very well. Not something that i would recommend or use in the future.

E. Edna, Illinois

Not a good mount. Yes it will hang a tv in a corner as advertised. However if you have to plug hdmi or any other cables it is difficult because the front plate covers right where you would need to connect hdmi, optical, or otherwise. Solid base however and holds well. Just not right for my 55" samsung.

F. Carmen, Bourgogne says

First off, the instructions are terrible. It took a long time to figure out whether we wanted to mount the arms close together or far apart (instructions gave no guidance), and then there was no way we could install it the way it was suggested. In the end we made a template (didn't come with one) to mark the wall, and we drilled and prayed we got it right. Which we did, but what should have taken 15 minutes, took an hour. More concerning is the quality of the wallboard anchors provided; none of the six bolts "hit bottom"; instead they kept turning. Gives me low confidence that it won't fall off the wall if someone gives it a good tug.

H. Wimbish, Nord-Pas-de-Calais

Mount seemed very sturdy, but the one we received was intended for drilling into brick or concrete. I could have gone and gotten different hardware, but the mount itself was so heavy i was concerned about attaching it to drywall, so i returned it instead. I wish the product description included more information.

C. Watson, Nova Scotia says

Let's break this product down. The frame itself is great and well built. 3 stars for that alone. The real issue comes with the mounting hardware they supply. The sheetrock anchors are useless and just pulled right out of the sheetrock. I was able to extend the bracket out a lot farther than. I wanted to secure to studs in the wall. Without doing that the product would not have worked.

B. Stacey, Leeds

While this wall mount seems very solid and easily accommodates my 48" led tv, i had several issues with set-up. . Two vertical brackets attach to the back of the tv and these brackets hang on the arm of the wall mount. The kit comes with many options of bolts to attach the brackets to the tv, however the ones that fit the threads of my samsung led tv were either too short or too long. I used some included spacers (meant for curved-back tvs) to make the long bolts fit. The "ultra-low profile" nature of the mount means that any cables that plug into the back of the tv may not fit between the tv and the arm once mounted. I worked around this problem by using the spacers between the tv and the brackets to allow for more room for cables to pass. (be sure to thread the cables between the arm and the tv so that they will not get caught in the mount when it is pushed against the wall. ). . The vertical brackets are adjustable to tilt the tv, however, they will not remain perfectly vertical due to the weight of the tv and the extra distance given with the spacers. It is also nearly impossible to adjust the tightness of the bolts that control the tilting once mounted. . The brackets are designed to hang on the top edge of the arm then swing into place at the bottom. A small screw on each bracket can be tightened to keep the bottom of the bracket from swinging away from the arm. These screws are attached to the one weak point of the bracket, so they bend that small piece of bracket and therefore don't provide enough support to keep the brackets from sliding back and forth on the arm when adjusting the position of the tv. I overcame this problem by using multiple layers of duct tape on either side of where the brackets hang on the arm to keep the brackets from sliding. . Despite these issues, the mount is clearly secure on the wall and has little to no "play" vertically even when fully extended. Extending the mount takes a little effort as all the joints are rather tight, and i suspect they may free up with time.

R. Linda, Maine says

This mount is designed for older tv and not the flat/thin modern ones. It is also very stiff to move on the hinges. Because it is not designed for flat thin tv's i had to use shorter bolts to attach it to my tv. It works fine but there are better mounts on the market.

. Cindy, City of Kingston upon Hull

Kinda bulky. You will need two full sized men to assemble. Setup is way more involved than the flat wall mount. But one of those unless you absolutely need your tv in the corner. Other than that, it is sturdy and works well once you get it assembled.

S. Kimberly, Durham says

One of the worst mounts on the market for samsung tvs. Granted i didn't install it right when i got it, but for samsung tvs the square mount either does not fit the pre drilled holes on the tv (one of my tvs), or on the other one that it would actually work for the metal square blocks the power cord spot on the back. The construction of the mount is also not the most elegant and very difficult to manuver.

. Meghan, Tennessee

Absolutely the worst tv mount i could've bought. I let the price fool me and that's on me. The arm has flexibility options that range from rigor-mortis to wind chime. I'm lucky that the tv itself is unharmed, even though i've seen it almost take a dip when trying to adjust it. Do not buy this. Don't go discount for something that's holding up a much more expensive purchase.

P. Hannah, Brent says

I purchased 2 of these and they wearnt identical. The assembly instructions are vague at best and the customer service was nonexistent. I would not buy again!

A. Morgan, St. Helens

I mounted a 55" in the corner and it holds fine. The problem is i don't have any room to swivel the tv. It may as well be a solid mount.

Y. Dorothy, Newcastle upon Tyne says

Seemed like a good idea, but my 60" tv was actually too big for this mount and the corner where i was mounting it. The tv touched on both sides of the wall, and actually gouged the wall. I returned it and bought something locally. Built pretty solid. You'll need two people to install.

I. Jarvis, West Virginia

We purchased 3 of these to hold 3 70-inch tvs that weigh 90 pounds each. The manufacturer states that these mounts are rated for 175 pounds. As soon as we mounted a tv to one of the mounts, the arm began to bend significantly at the center joint of the articulating arm, making them unsafe for use. Unfortunately, we had to eat the cost of these because we were no longer able to return them, but that's more our fault then theirs. . They do feel strong, so i'm sure these would work for tvs weighing around 25-50 pounds, but i wouldn't go over that. The manufacturer needs to go back and evaluate their weight restrictions. We ended up going with a sanus mount instead that was of much higher quality. I would recommend to anyone looking into a mount for a heavier tv that the old adage "you get what you pay for" is very true.

U. Aldana, Calderdale says

The plate that mounts to the studs is slightly over 16" so i was able to catch two studs and mount it securely with the provided lag bolts. I may have been lucky in that there was a stud near the center of the wall so i was able to mount the plate to two studs and still have the tv centered on the wall. If the studs were located differently, centering the tv may have been a problem. A longer plate would provide more flexibility in positioning. Also, the bushings provided were not the proper size to mount my curved samsung tv. I had to cut them and add washers so the screws that attach the mounting brackets to the back of the tv fit properly. I had everything level when attached the plate to the wall, but when the tv is hung there appears to be sufficient torque that the tv is lower on one side than the other. Fortunately, the device is designed so that i did not have to remove the mount and start all over. I only had to remove the tv, loosen the bolts on the front plate and change the level-make it higher on one side to account for the torque. It is trial and error but relatively simple.

K. Rhonda, Australian Capital Territory

It didn't fit our tv even though it's only a 42 inch. The bolt holes in the back did not line up with the ones on the mount & it does not come with any extender pieces. I returned this one and bought a cheetah one that worked great.



Leave a Reply

You must be logged in to post a comment.


Back to Top

Related Products

  • See Offers
    Husky Mounts Universal Extenders Extensions (jra 01)

    Husky Mounts Universal Extenders Extensions (jra 01) 2158

    Low Price Husky Mounts Universal Extenders Extensions (jra 01), 4 Universal Vesa Adapters Extenders Converts 200x200 Mount To Fit 400x400, 400x200, 400x300 300x300 Patterns, Flat Screen Tv Wall Mount Bracket Please Note; Your Existing Mount Has To Be A Vesa 200x200 For The Adapters To Fit On It. 400mm X 400mm Adapters Extend Mountable Vesa Hole Pitch To 400mm X 400mm So That Larger Size -Husky Mounts 4 Universal Vesa Adapters Extenders Converts 200x200 Mount To Fit 400x400, 400x200, 400x300 300x300 Patterns, Flat Screen Tv Wall Mount Bracket Extensions
    1. Properties: 400mm X 400mm Adapters Convert Mountable Vesa Hole Pitch From Vesa 200x200 (8"x 8") To Vesa Up To 400mm X 400mm (16"x 16") So That Larger Size Tvs Can Be Mounted.
    2. Properties: Please Follow The Instruction Very Carefully, If You Can't Make Them Fit, Please Contact Us, We Will Guide You Through.
    3. Ez pz - needed to secure a new, larger tv on an older model wall mount stanchion and the adapters served up the perfect recipe. Quite the palatable result. https://puqus.com/husky-mounts-universal-extenders-extensions-21581mxysbgi/#husky-mounts-universal-extenders-extensions
    Modest Husky Mounts Universal Extenders Extensions (Av Furniture) Jra 01
  • Low Price
    Screens Motion Articulating Extension 600x400 (Basics Hardware)

    Screens Motion Articulating Extension 600×400 (Basics Hardware) 333

    Get Discount Screens Motion Articulating Extension 600x400 (Basics Hardware), Tv Wall Mount Fits 19 -55 Lcd/led/flat Screens Up To 66lb. Full Motion Swivel Articulating Arm. Tilt, 20 Extension Arm, Vesa 600x400, Hdmi Cable & Bubble   A Good Tv Wall Mount Is As Important As Your Flat-screen Tvs! Not Only Does It Secure The Tv Firmly In Place But A Wall Mount Will Also Enhance Your Viewing Experience By Holding -Tv Wall Mount Fits 19 -55 Lcd/led/flat Screens Up To 66lb. Full Motion Swivel Articulating Arm. Tilt, 20 Extension Arm, Vesa 600x400, Hdmi Cable & Bubble Level
    1. Details: Tilt, Swivel And Rotate Helps You Adjust The Tv To Perfectly Level To The Best View, No Matter Where You Sit In The Room.
    2. Details: Extend To 22" From The Wall For Smooth Moves And Retract To 3" To Save Space.
    3. This can't be beat for the price. Super easy to install and adjust. https://puqus.com/screens-motion-articulating-extension-600x400-3336wp5hy5r/#screens-motion-articulating-extension-600x400
    For Sale Screens Motion Articulating Extension 600x400 (Home) Bh2255
  • On Sale
    Aeon Stands Mounts Adjustment 50 Inch (aeon 60112)

    Aeon Stands Mounts Adjustment 50 Inch (aeon 60112) 996

    See Reviews Aeon Stands Mounts Adjustment 50 Inch (aeon 60112), Aeon Stands Mounts Small Tv Stand Swivel Height Adjustment 23 To 50-inch Sleek, Modern Design This Replacement Tv Stand Is Great For Smaller Displays. The Aeon 60112 Swiveling Universal Tv Stand Is Ideal For Flat Panel Displays 23-50". Works Great As A -Aeon Stands Mounts Small Tv Stand Swivel Height Adjustment 23 To 50-inch Tvs
    1. Details: Adjustable! Swivels Left Or Right So Achieving The Ideal Viewing Angle Has Never Been Easier. Also Height Adjustable So Your Tv Can Be Adjusted To Your Application Or Allow Room For A Soundbar Or Component Below. This Way The Ir Sensor On Your Tv Will Never Be Blocked And Your Remote Control Will Always Function As It Should.
    2. Have had this stand for some time now, and still love it! it was a little tricky to put together, but it's heavy, so won't tip over, and its versatility, with height, and the swivel, makes this an awesome tv stand! https://puqus.com/aeon-stands-mounts-adjustment-50-inch-9961bh2nftm/#aeon-stands-mounts-adjustment-50-inch
    3. Details: Replace Your Tv Stand. This Tv Stand Adds A Unique Ability To Swivel Where Others Cannot. Now Your Tv Can Be Directed Up To 45 Degrees In Each Direction Towards The Viewing Area By Pivoting The Unit. No Need To Twist The Base With It. This Feature Is Usually Available Only On Articulating Tv Mounts.
    Reasonable Aeon Stands Mounts Adjustment 50 Inch (Home Furniture And Decor) Aeon 60112
  • Get Discount
    Hta3770 Universal Replacement Swivel Feature (fba hta3770)

    Hta3770 Universal Replacement Swivel Feature (fba hta3770) 2364

    Purchase Now Hta3770 Universal Replacement Swivel Feature (fba hta3770), Hta3770 universal replacement tv stand / base swivel feature fits 37 -70 tvs flat panels, lcd, new tv replacement stand/base swivel feature. this stand will fit most 37"-70" flat panel tvs, lcd, led tvs. the design of this mount will allow your tv to swivel horizontally 30 -hta3770 universal replacement tv stand / base swivel feature fits 37 -70 tvs flat panels, lcd, led
    • Rick from the seller's warehouse was very responsive and detailed about helping me make sure this was the least costly unit for what i wanted it to do and most importantly that it fit my tv/mounting options. https://puqus.com/hta3770-universal-replacement-swivel-feature-23641btbvv5q/#hta3770-universal-replacement-swivel-feature
    • Quality: Swivel Function For Adjusting Viewing Angle Up To 30 Degrees.
    • Quality: Please Carefully Check Your Tvs Mounting Hole Pattern And Weight! . This Mount Will Work With Vesa Patterns Up To 600x400 (600mm X 400mm). (horizontal Measure 24-5/8" X Vertical Measure 15-3/4") Maximum Weight 70 Lbs (31. 75kg). Please Note: You Need To Carefully Check Your Tvs Mounting Holes Before Purchase. If Your Tv Is Not Compatible And The Stand Is Ordered In Error There Will Be A Restocking Fee On Any Returns.
    Low-End Hta3770 Universal Replacement Swivel Feature (Av Furniture) Fba Hta3770

Product Image Gallery

Top-mount-mi-484c-articulating-premium-capacity-2075052ht3uo-Content