Mount Mi 803 Component Playstation4 Projector (Mount It) 2305

Review for mountit floating wall mounted

Price was $54.99. Really like it, i wanted the bottom touching a shelf which left no room under the bottom shelf, but it is versatile enough to build it upside down and now it is perfect with about an 8" space underneath where i put accessories like earphones, remotes, etc. Looks very classy too. Very solidly built, would probably hold more than it's rating if you really needed to.

-P. Anonymous

Mount-it Floating Wall Mounted Shelf Bracket Stand Av Receiver, Component, Cable Box, Playstation4, Xbox1, Vcr Player, Blue Ray Dvd Player, Projector, Load Capacity 66 Lbs, Three Shelves, Tinted Tempered Mount-it! Floating Wall Mounted Triple Shelves Allow You To Get Rid Of Your Floorstanding Tv Furniture And Complement The Look Of Your Wall Mounted Flat Screen Television. The Triple -Mount-it Mi-803 Floating Wall Mounted Shelf Bracket Stand Av Receiver, Component, Cable Box, Playstation4, Xbox1, Vcr Player, Blue Ray Dvd Player, Projector, Load Capacity 66 Lbs, Three Shelves, Tinted Tempered Glass

  1. Items: Shelf Size: 17. 5 Inch Wide, 14 Inch Deep. The Black Tempered Glass Shelf Is Tinted And Is Oversized To Support Of Various Equipment. The Wall Bracket Measures 29. 94 Inches High And Should Be Installed On A Wall Stud For Safe Floating Shelf Installation. The Wall Bracket Has Cable Management Holes That Allow You To Route Cables Neatly To Your Components.
  2. Items: With Its Heavy-duty Design, This Shelving System Can Support Up To 22 Lbs. The Tempered Black Glass Is 6 Mm (approximately 1/4 Inches) Thick.

Sale Mount Mi 803 Component Playstation4 Projector (Av Furniture) Mi 803

Buy Now

Introduction

Assembly required but what doesn't these days? get someone to help hold it together while you tighten the rods and it goes pretty well. Better than i expected actually. It is heavy, so again get someone to help hang it on the wall. . After the pre-assembly there are two parts. The wall plate and the curved part with the shelves. Screw the small wall plate to a stud. Simple. Lift the heavy shelving unit onto the plate. There are two screws at the top that secure it. Done. . There seemed to be some concern in the reviews about the space in the back for wire. I thought it was plenty but it does get a little tight with the power plugs and hdmi plugs. My solution was to run the wires and place the cable box and blu-ray player on the shelves and then lift it to the wall. I had my wife help me but it was only about 30 lbs. So it went really well. No arguing! . . Thought about giving it 4 stars because of the assembly but it wasn't that bad and now that it is up i love it. Nice and clean look with my new tv mount. Looks great so 5 stars on this. Best mountit floating wall mounted | Transform Partners-Av Furniture Review ( Nov 2019 ) Items Mount-It! MI-803 Floating Wall Mounted Shelf Bracket Stand for AV Receiver, Component, Cable Box, Playstation4, Xbox1, VCR Player, Blue Ray DVD Player, Projector, Load Capacity 66 lbs, Three Shelves, Tinted Tempered Glass Elegant, modern and decorative aluminum plate and glass triple wall shelf designed to hold dvd players, dvrs, hd recorders, cable tv boxes, av components, gaming systems, for storage of cds, dvds and any other media, even to mount projectors. it will complement your wall mounted tv and help you achieve an uncluttered look with no need for large media stands or tv furniture.. Shelf size: 17. 5 inch wide, 14 inch deep. the black tempered glass shelf is tinted and is oversized to support of various equipment. the wall bracket measures 29. 94 inches high and should be installed on a wall stud for safe floating shelf installation. the wall bracket has cable management holes that allow you to route cables neatly to your components.. With its heavy-duty design, this shelving system can support up to 22 lbs. the tempered black glass is 6 mm (approximately 1/4 inches) thick.. Standard mounting hardware and easy to use instructions included. it is very easy to install. this shelf can be installed in one corner on the wall with an adjacent on the other corner. easy to mount the shelf on the wall with the provided wall-mounting bracket.. Mount-it! experience and guarantee. mount-it! is the expert in television wall mounts and home theater accessories. we apply our decade long experience in this field to offer the best features at value prices. all our products are guaranteed for satisfaction. contact our friendly customer support team for any questions or issues. .

Mount-it mi-803 floating wall mounted shelf bracket stand for av receiver, component, cable box, playstation4, xbox1, vcr player, blue ray dvd player, projector, load capacity 66 lbs, three shelves, tinted tempered glass Review (mi 803)

This is a spectacular option for a receiver. It's the only thing sturdy enough and large enough to handle it. I bought another set of shelves from these guys. Their stuff is super easy to install, looks great, and works great. If you're looking for a shelf for your receiver, this is it! it even has a bit of swivel and some space back behind it so you can connect new components back there more easily. -E. Wells

Mount Mi 803 Component Playstation4 Projector

  • Order: Electronics
  • Brand: Mount-It!
  • Color: High Gloss Black
  • EAN: 0628586132337
  • Product Dimensions:
    Height:15.25 inches
    Length:27.25 inches
    Width:4.75 inches
  • Manufacturer: Transform Partners LLC
  • Model: MI-803
  • MPN: MI-803
  • Total: 1
  • Quantity: 1
  • Part/Serial Number: MI-803
  • Sub-Type: Speakers
  • Category: AV FURNITURE
  • Size: 3 Shelf
  • UPC: 628586132337

mount-it floating wall mounted shelf bracket stand av receiver, component, cable box, playstation4, xbox1, vcr player, blue ray dvd player, projector, load capacity 66 lbs, three shelves, tinted tempered Speakers, Mount-it! floating wall mounted triple shelves allow you to get rid of your floorstanding tv furniture and complement the look of your wall mounted flat screen television. the triple shelf design allows you to place dvd players, cable boxes and other av components on the wall. the shelving system is very durable and can carry up to 66 pounds of total weight. made from sturdy extruded aluminum and tempered glass. its large surface area can easily hold gaming systems and bluray dvd players. the installation is very easy. simply locate the wall stud and use the provided hardware to hang the wall mounting plate on the wall. once the wall plate is installed, place the tempered glass shelves on the wall bracket channels. cable management holes hide the unsightly cables. features and specifications: dimensions: 17. 5 inch wide, 14 inch deep, 29. 84 inches high. 8. 78 inches of vertical clearance between each shelf. fits most dvd players, cable boxes, av receivers and gaming consoles. 6 mm thick black tempered glass. powder coated aluminum wall plate for modern look and scratch resistance. cable management system. 22 lbs carrying capacity for each shelf, 66 lbs total. warning: the installer of these products must verify that the mounting surface or wall, will safely support the combined weight of all attached equipment and hardware. Mount Mi 803 Component Playstation4 Projector (MI-803-Mount It).

Mount Mi 803 Component Playstation4 Projector Speakers

PROS
  • Just installed this yesterday 12/17/2015. It definitely takes two people to install it. It is quit heavy. I found that where i wanted to install this i didn't have a stud behind the wall to bolt it into. Easy fix. I went to home depot and bought 4 steal anchors. $2. 00 (holds 70 pounds). Do not use the anchors they give you. Plastic and most likely wont hold. I set them into place and they anchored behind the sheetrock. It looks great. Enough room for my cable box, ps4, and my full size blue ray player. Worth the buy. The only negative thing i have to say is about the coating underneath the glass plates. It is very easy to scratch. But if you do scratch it your cable box with cover it.
  • It came quickly and was packaged well. Pretty straight forward wall mounting (for full rating capacity, 30 , it must be secured to a wall stud). It's a very attractive unit and i have a audio receiver, blu-ray, and satellite receiver monted on it and it's very sturdy. It's being used below our tv mounted on the wall and the only down side is that there's no cable management with the unit, that being said i still give it 5 stars. Highly recommend.
CONS
  • The mount looks great on the wall. We have a receiver, xbox one, ps4 and a directv box on the 3 shelves. Here's why it gets 3 stars. The holes u run the wires through are not large enough to accomidate the special cords that the xbox one and ps4 come through. So while all the other cords are hidden, those can't be bc that cylinder hard plastic piece that's on both ends of the game consoles cords won't go through the top or bottom hole on the cable management part of this shelf. Other than that it looks great, very sturdy and well made. Maybe i shouldn't fault this company, i should fault microsoft and sony.
  • Not too impressed. It looks ok, but wow is it a pain to put together. Then when you are ready to put it on the wall you have to, only then, run the cables you want in its "cord mismanagement" system. The amount of space given for cables is a joke. It would be impossible to run the wires once it is on the wall. All they needed to do to correct this would be to use a little more metal to make the unit wider. Also, this thing was made in china.
  • Unit is made well but shelf depth measurement is from back of glass shelf and not from vertical support. Unit is to shallow and weak for and av receiver units. It works well for cable box and game consoles/blu-ray players.

mountit floating wall mounted Mount-It! MI-803 Floating Wall Mounted Shelf Bracket Stand for AV Receiver, Component, Cable Box, Playstation4, Xbox1, VCR Player, Blue Ray DVD Player, Projector, Load Capacity 66 lbs, Three Shelves, Tinted Tempered Glass (Switch to Mobile/Desktop Version)

We brought 2. My husband turned an old computer into our movie library/media center so we needed a large wall mount for that and his receiver. We've had both of them up for months now and it's been holding up steady. There was a problem with a non-essential piece that wouldn't stay in place but i'm still giving it a 5 start rating because this was the only shelf i could find in these dimensions.

Mount-it Mi-803 Floating Wall Mounted Shelf Bracket Stand Av Receiver, Component, Cable Box, Playstation4, Xbox1, Vcr Player, Blue Ray Dvd Player, Projector, Load Capacity 66 Lbs, Three Shelves, Tinted Tempered Glass
Click to see NoticeMount Mi 803 Component Playstation4 Projector (Mount It)"What a great option for a single shelf solution. You can mount this either right side up or you can invert the back plate if need be. I needed to simply because i was mounting this over a plasma t. V. I needed that hole you see in the photograph below not above the shelf. It takes a little getting used to the assembly but if you are mechanically inclined it will be no problem. If you suck at mechanical stuff, please don't give up. It will come to you, trust me. If you are looking for a small, modern looking shelf to hold a piece of equipment or two, this is it. It went up in under an hour from assembly to installation. Cheers,"

(0) Question: What are the actual usable shelf space dimensions? it says 14" deep but it looks like some of that is offset by the mount frame so is it less?


(1) Question: Are these shelves adjustable?


(2) Question: What are the usable shelf dimensions?



Mount-It Wall Mounted Floating Shelf Bracket Stand AV Receiver, Component, Cable Box, Playstation4, Xbox1, VCR Player, Blue Ray DVD Player, Projector, Three Shelves, Tempered Glass MI-813

Mount-it! floating wall mounted triple shelves allow you to get rid of your floorstanding tv furniture and complement the look of your wall mounted flat screen television. The triple shelf design allows you to place dvd players, cable boxes and other av components on the wall. The shelving system is very durable and can carry up to 52. 8 pounds of total weight. Made from sturdy extruded aluminum and tempered glass. Its large surface area can easily hold gaming systems and bluray dvd players. The installation is very easy. Simply locate the wall stud and use the provided hardware to hang the wall mounting plate on the wall. Once the wall plate is installed, place the tempered glass shelves on the wall bracket channels. Cable management holes hide the unsightly cables. Features and specifications: dimensions: 15 inch wide, 11 inch deep, 22. 8 inches high. Adjustable vertical clearance between each shelf. Fits most dvd players, cable boxes, av receivers and gaming consoles. 5 mm thick black tempered glass. Powder coated aluminum wall plate for modern look and scratch resistance. Cable management system. 17. 6 lbs carrying capacity for each shelf, 52. 8 lbs total. Warning: the installer of these products must verify that the mounting surface or wall, will safely support the combined weight of all attached equipment and hardware. Accommodates various components such as: -cable boxes -satellite boxes -digital converters -dvrs -blu-ray players -dvd players -vcr players -video game consoles -routers -home theater systems

Mount-It Wall Mounted Floating Shelf Bracket Stand AV Receiver, Component, Cable Box, Playstation4, Xbox1, VCR Player, Blue Ray DVD Player, Projector, Three Shelves, Tempered Glass MI-813Mount-Floating-Component-Playstation4-Projector

MOUNT-IT WALL MOUNTED FLOATING SHELF BRACKET STAND AV RECEIVER, COMPONENT, CABLE BOX, PLAYSTATION4, XBOX1, VCR PLAYER, BLUE RAY DVD PLAYER, PROJECTOR, THREE SHELVES, TEMPERED GLASS MI-813 Spotlight
Brand :    mount-it!
Color :    Black
Size :    3 Shelf
Model :    MI-812
Quantity :    1
Order click here :    normally ships in 24 hours
  • Mount-it! experience and guarantee. mount-it! is the expert in television wall mounts and home theater accessories. we apply our decade long experience in this field to offer the best features at value prices. contact our friendly customer support team for any questions or issues.
  • With its heavy-duty design, this shelving system can support up to 17. 6 lbs on each shelf. the tempered black glass is 5 mm (approximately 0. 2 inches) thick. the height of each shelf can be adjusted up and down on the back plate. this allows you to adjust the vertical clearance you would need for different components.
  • Elegant, modern and decorative aluminum plate and glass triple wall shelf designed to hold dvd players, dvrs, hd recorders, cable tv boxes, av components, gaming systems, for storage of cds, dvds and any other media, even to mount projectors. it will complement your wall mounted tv and help you achieve an uncluttered look with no need for large media stands or tv furniture.
  • Standard mounting hardware and easy to use instructions included. it is very easy to install. this shelf can be installed in one corner on the wall with an adjacent on the other corner. easy to mount the shelf on the wall with the provided wall-mounting bracket.
  • Shelf size: 15 inch wide, 11 inch deep. the black tempered glass shelf is tinted and is oversized to support of various equipment. the wall bracket measures 22. 8 inches high and should be installed on a wall stud for safe floating shelf installation. the wall bracket has cable management holes that allow you to route cables neatly to your components.
Price :    $35.99
Home :    Best Home (mount-it! product review) for Mount-It Wall Mounted Floating Shelf Bracket Stand AV Receiver, Component, Cable Box, Playstation4, Xbox1, VCR Player, Blue Ray DVD Player, Projector, Three Shelves, Tempered Glass MI-813 available ( Nov 2019 )

Three Floating DVD DVR Shelf 3x Wall Mount AV Shelves 15x11 inch Strengthened Tempered Glass - PS3, PS4, Xbox One, Xbox 360, TV box & Cable Box - Bonus 6 Slim HDMI Cable PERLESMITH

Comfortably fits our dvd player, roku, modem & wi-fi unit. Looks nice, just the right size both depth and width.

Maximum load capacity give your components a sturdy and sleek home with the three shelf wall mount. The shelf can hold up to 16. 5lbs of components such as a game console, cable box, or blu-ray player. Adjustable shelf height adjustable shelf height ensures that your unit is mounted at the perfect height. 5mm black tempered glass shelves black tempered glass gives an added touch to your home theater system while providing security and stability when mounting your devices. Make better use of your space free up your floor space and organize your entertainment center better in your living room, family room, media room, den or office. Cable management perlegear shelf wall mounts allow you to place your cable box, blu-ray player and all of your other tv necessities close to your tv, all while hiding your cables. Includes a bonus 6 feet hdmi cable and 3 piece cable ties. Sleek look the dvd player wall mount is finished with an all-black coating for a sleek look. The streamlined design will give your house some serious cred. Mounting hardware our hardware kit includes all necessary hardware for concrete walls and single wood stud mounting. Lifetime warranty buy now risk free with our lifetime warranty guarantee!

Three Floating DVD DVR Shelf 3x Wall Mount AV Shelves 15x11 inch Strengthened Tempered Glass - PS3, PS4, Xbox One, Xbox 360, TV box & Cable Box - Bonus 6 Slim HDMI Cable PERLESMITHThree-Floating-DVD-DVR-Shelf

Three Floating Dvd Dvr Shelf (Perlesmith) FAQ.

We received our order fast. It was delivered right on time. Installation was easy. The difficult part was organizing tje cords so it didnt look tacky. Lol. The product was well worth it. The shelves are very nice. It was a great buy. Will highly recommend. -Notice from M. Widmer, Brandenburg

Click to Show three floating dvd dvr shelf (perlesmith) Details

Easy install, does a good job of holding dvr, roku, or cable box.

Three-floating-dvd-dvr-shelf-(perlesmith) set picture

- V. NogueraEasy to install. works for what i bought it for

Easy to install, but cable run is very hard to use due to the size and hardness of the plastic guides. But it looks great and works.

Y. Matherly, Nottingham

THREE FLOATING DVD DVR SHELF 3X WALL MOUNT AV SHELVES 15X11 INCH STRENGTHENED TEMPERED GLASS - PS3, PS4, XBOX ONE, XBOX 360, TV BOX & CABLE BOX - BONUS 6 SLIM HDMI CABLE PERLESMITH Spotlight
Brand :    perlesmith
Color :    Black
Size :    3 Shelf
  • Load capacity: our floating shelf can hold up to a whopping 16. 5 lbs. this wall shelf allows you to place multiple av components on it without any worries.
  • Compatibility: the wall mount shelf is compatible with wood and concrete walls. the adjustable floating shelf feature ensures that your unit is mounted at the perfect height.
  • Durability: our wall mounted shelf is built with one large strengthened tempered glass shelf (15 x 11 inch shelf and 5mm thick), designed for dvd/blu-ray players, satellite/cable boxes, games consoles, hi-fi and surround sound speakers.
  • What you get: all of the mounting hardware is included with this dvd shelf mount plus a bonus 6 feet super slim hdmi cable and 3 piece cable ties. feel the love with our lifetime worry-free warranty and friendly customer service.
  • Easy installation: our product comes with an easy to use instruction manual for quick and easy installation with fittings provided. install the tv shelf without any hassle.
Price :    $26.99 (was $89.99)
Model :    PSDSK3
Order click here :    normally ships in 24 hours
Furniture :    Best Home Furniture And Decor (perlesmith product review) for Three Floating DVD DVR Shelf 3x Wall Mount AV Shelves 15x11 inch Strengthened Tempered Glass - PS3, PS4, Xbox One, Xbox 360, TV box & Cable Box - Bonus 6 Slim HDMI Cable PERLESMITH available ( Nov 2019 )

WALI Floating Wall Mounted Shelf Strengthened Tempered Glasses DVD Players/Cable Boxes/TV Accessories, multiple combination function, 3 Shelf, Black

Was easy to install, l love it . But didn't take in the size for dish network box . Need bigger shelf for it , hang off of it about inch. Husband worried about it , but i'm not. This can be use in any room.

Wali has earned a reputation for delivering quality yet elegant mounting solutions. For customers seeking a reliable floating shelf with strengthened tempered glass, look no further. The ultra-slim wali wall mount has an all-black coating and adjustable shelf height to enhance the look of your entertainment system and free-up floor space. The sleek 5 mm black tempered glass shelf allows you to mount your dvd player, gaming consoles, or cable box weighing up to 17. 6 lbs. The slim wall plate protrudes just 19 mm from the wall allowing you to discreetly organize and hide your messy cables. Complete mounting hardware kit and user manual included for easy installation to wood, brick or concrete wall.

WALI Floating Wall Mounted Shelf Strengthened Tempered Glasses DVD Players/Cable Boxes/TV Accessories, multiple combination function, 3 Shelf, BlackWALI-Floating-Strengthened-Accessories-combination

Wali Floating Strengthened Accessories Combination (wa cs303) FAQ.

Its very sturdy. I'm sure it helps if you install it correctly. It is a huge space saver and our remote controls dont have anything in the way now so it makes for a much more pleasant living room experience. -Notice from Z. Guest, Hartlepool

Click to Show wali floating strengthened accessories combination (wa cs303) Details

Wali 1x black shelf dvd dvr vcr wall mount bracket component shelf for dvd player dds receiver video audio cable boxi ordered 2. Both only took a few minutes to install. Very easy. Very modern. Can't beat the price. I'd highly recommend to anyone.

Wali-floating-strengthened-accessories-combination-(wa-cs303) set picture

- T. AlmaWorks fine and looks good. Instructions are a bit off; they are apparently made for this one-shelf model as well as possibly another with two-shelves, because they mention a second shelf. That is a bit uncalled for, but no problem. Also, i think i was expecting to be able to completely hide any cables from this stand to the tv, but it cannot do that. Again, no big deal, but if that is something you need, you may want to look at other shelves

Solid shelf for smaller set top box or similar. We have tivo's (premier's and minis) on ours and no issues. Not sure i would want anything bigger or heavier than a normal cable box / tivo though on it.

I. Walsh, Gateshead

WALI FLOATING WALL MOUNTED SHELF STRENGTHENED TEMPERED GLASSES DVD PLAYERS/CABLE BOXES/TV ACCESSORIES, MULTIPLE COMBINATION FUNCTION, 3 SHELF, BLACK Advantage
Brand :    wali
Color :    Black
Size :    3 shelves
Model :    WA-CS303
Quantity :    1
Order click here :    normally ships in 24 hours
  • Features: this updated 3 shelves system that can be detached and reconstructed into a 1 shelf unit and 2 shelves unit. large strengthened tempered glass shelf (each glass measures 15 inch x 11 inch x 5mm thick), supporting a maximum weight up to 8kg (17. 6lbs) per shelf.
  • Package includes: 1 x wali floating shelf system (black), 3 x strengthened tempered glass, 1 x mounting hardware kit, 1 x user manual, 10 year-warranty
  • Smart design: elegant floating shelf (with adjustable height) to free-up floor space and enhance the look of your entertainment system.
  • Environment: quality wall mount solution for holding dvd/blu-ray players, satellite/cable boxes, games consoles, hi-fi and surround speakers, etc.
  • Cable management: the slim all-black wall plate (3 inch wide) with built-in cable management on both sides protrudes just 19mm from the wall when installed, providing a clean overall look with cables neatly hidden.
Price :    $26.99 (was $29.99)
Furniture :    Best Home Furniture And Decor (wali product review) for WALI Floating Wall Mounted Shelf Strengthened Tempered Glasses DVD Players/Cable Boxes/TV Accessories, multiple combination function, 3 Shelf, Black available ( Nov 2019 )

Kanto AVS3 AV Component Wall Shelf System - Triple

The product is well designed and easy to install. Took approximately 30 min for to install everything. The only complaints i have is when mounting it on dry wall one of the dry wall anchors would not establish a postive grip inside the wall, so i was only able to tighten the screw to a light tension or it would loose tension and turn freely. The other compliant is if you accidentally bump one of the shelves from the side it will move from side to side slightly for about ten seconds.

Kanto audio and video component wall shelves are designed to maximize space and minimize mess. Three tempered glass shelves hold your dvd, satellite, game console or cable tv box while the black removable covers contain a built-in wire management system to protect and conceal cables. These shelves are easy to mount and complement any tv wall-mount installation.

Kanto AVS3 AV Component Wall Shelf System - TripleKanto-AVS3-Component-Shelf-System

Kanto Avs3 Av Component Wall Shelf System - Triple (Av Furniture) FAQ.

Worked like a charm. After ordering an omnimount and having monumental problems with a screwhead snapping off and everything falling in the floor, i was hesitant to attempt another component wall shelf. I am glad i did as i installed this one today and thus far am highly impressed. Easy to install ( even covering up part of the omnimount screw that was still stuck in the stud). Looks great, holds my new tivo beautifully and hides all the wicked wires. Couldn't ask for more. Very pleased. -Notice from J. Melissa, Gloucestershire

Click to Show kanto avs3 av component wall shelf system - triple (av furniture) Details

It was perfect. The directions left something to be desired, however, so i just used common sense.

Kanto-avs3-av-component-wall-shelf-system---triple-(av-furniture) set picture

- Q. SmithThis is the best floating wall shelf. Hides the cables with ease. Setup is easy as well. It looks cool.

My room has limited space so this is exactly what i was hoping for. Great product with reasonable price.

M. Mays, Maryland

KANTO AVS3 AV COMPONENT WALL SHELF SYSTEM - TRIPLE Reviews
Brand :    kanto
Color :    Black
Size :    Triple
Weight :    25.70 pounds
  • Built-in wire management system
  • 3 vertically adjustable, black tempered-glass shelves
  • Mounts on wood studs or drywall for a sleek "floating" look
  • Holds up to 60lbs (27kg)
  • Each shelf is 17 inches wide, 13 inches deep
Price :    $61.19 (was $74.99)
Model :    AVS3
Quantity :    1
Order click here :    normally ships in 24 hours
Speakers :    Best Av Furniture (kanto product review) for Kanto AVS3 AV Component Wall Shelf System - Triple available ( Nov 2019 )

Basics RCA Component Video Cable - 6 Feet 1.8 Meters

Online storebasics products are quality electronics accessories offered at a great value.

Basics RCA Component Video Cable - 6 Feet 1.8 MetersAmazonBasics-RCA-Component-Video-Cable

BASICS RCA COMPONENT VIDEO CABLE - 6 FEET 1.8 METERS Reviews
Brand :    basics
Color :    Black
Size :    6 Feet/1.8 Meters
Weight :    0..84 pounds
Model :    1
Quantity :    1
Order click here :    -
  • Constructed to minimize interference; durable, black pvc outer layer; and corrosion-resistant, gold-plated connectors for optimal signal transfer
  • Ships in certified frustration-free packaging
  • Connects dvd and blu-ray players, satellite receivers, video game consoles, and cable boxes to hdtvs and video projectors
  • One 6-foot-long (1. 8 meters) rca component video cable
Price :    $8.99
Speakers :    Best Cable Or Adapter (basics product review) for Basics RCA Component Video Cable - 6 Feet 1.8 Meters available ( Nov 2019 )

Mount-It MI-893 Floating Wall Mounted Shelf Bracket Stand AV Receiver, Component, Cable Box, Playstation4, Xbox1, DVD Player, Projector, 53 Lbs Capacity, 3 Shelves, Tinted Tempered Glass

Mount-it! triple shelf wall mount for tv components instead of taking up valuable floor space with a large system cabinet, mount your dvd player, cable box, and/or other home entertainment devices on the wall using this triple shelf wall mount for av components this shelf system mounts to any wall (brick, concrete, wood stud, etc. ) and provides three 14. 2" x 9. 85" shelves. The shelves are made of 5mm thick tempered glass for extra strength and is safely secured to the wall bracket with screws. Each shelf can support up to 17. 6 lbs (8 kg) of weight. Mount-it! shelving system is ul certified for the rated load capacity. Our competition does not have this certification. The shelving system is tested to 3 times the load to be eligible for the certification. Do not trust your valuable components to cheap and flimsy shelves selling on the market. The wall plate measures 3. 3" wide x 22" high and is 1. 3" thick. The shelf's vertical position on the wall plate can be adjusted. Cable management is available through designed cable holes on the glass shelves. Accommodates various components such as: -cable boxes -satellite boxes -digital converters -dvrs -blu-ray players -dvd players -vcr players -video game consoles -routers -home theater systems glass size: depth: 9. 85" by width: 14. 2" designed to be used in combination with your wall mounted tv. Height-adjustable shelves allows you to adjust the height of the shelves to best accommodate your components. Mounting type: single stud application - must be mounted onto wooden stud(s) or solid concrete wall. Color: black with smoked black glass

Mount-It MI-893 Floating Wall Mounted Shelf Bracket Stand AV Receiver, Component, Cable Box, Playstation4, Xbox1, DVD Player, Projector, 53 Lbs Capacity, 3 Shelves, Tinted Tempered GlassMount-MI-893-Component-Playstation4-Projector

MOUNT-IT MI-893 FLOATING WALL MOUNTED SHELF BRACKET STAND AV RECEIVER, COMPONENT, CABLE BOX, PLAYSTATION4, XBOX1, DVD PLAYER, PROJECTOR, 53 LBS CAPACITY, 3 SHELVES, TINTED TEMPERED GLASS Highlight
Brand :    mount-it!
Color :    Black
Size :    3 Shelf
Model :    MI-893
Quantity :    1
Order click here :    normally ships in 24 hours
Furniture :    Best Home Furniture And Decor (mount-it! product review) for Mount-It MI-893 Floating Wall Mounted Shelf Bracket Stand AV Receiver, Component, Cable Box, Playstation4, Xbox1, DVD Player, Projector, 53 Lbs Capacity, 3 Shelves, Tinted Tempered Glass available ( Nov 2019 )
Price :    $26.24 (was $28.49)
  • Triple shelf design: included 3 shelves are constructed out of tempered glass and they have height adjustability. adjust any of your shelves for different components. each shelf is 14. 2in. x 9. 85in.
  • Organizing device: saves space and neatly organizes your av equipment. height-adjustable shelves allow you to adjust the height of the shelves to best accommodate your components. cable management will be much easier
  • Place any device on it: designed for use with dvd players, dvr, hd recorders, cable boxes, mp3, speakers, gaming consoles (xbox, playstation, nintendo, etc) and other audio video equipment.
  • Heavy duty construction: weight capacity of 17 lbs per shelf. load capacity is tested to 3 times the rated load
  • Install within minutes: easy and secure installation with easy to follow instructions manual. elegant design: they have a silk black coat finish. the wide shelving design and color scheme are convenient and sleek.

Mount Factory Heavy-Duty Full Motion Articulating TV Wall Mount - 40 in. - 70 in. HDMI cable

This premium articulating mount is designed to universally fit most led, lcd, plasma tvs and other flat panel displays from 42" to 70". This unit is designed to use the standard vesa patterns installed in almost all flat screen tvs with a range of 200mm x 200mm up to 400mm x 600mm. Constructed from commercial-grade, heavy-duty steel, and high-quality barrel hinges, this sturdy unit is rated with a capacity up to 100 pounds. The smooth-motion, articulating design allows for tilting, panning, and extension to find the perfect viewing angle. The arms of the television mount can be extended up to 20 inches from the wall or retracted back to within about 3 inches. In addition, the tv can rotate up to 160 degrees left or right and the tilt can be set from +8 to -5 degrees to find your ideal settings. Convenient openings in the arms and back plate provide space to pass cables and wires through for a clean and uncluttered look. For your convenience, the articulating arms and back plate are pre-assembled right out of the box and the step by step instructions will guide you through the simple assembly and installation process. Certifications: rohs, ce & iso-9001. Also included is a 6 inch magnetic level to help you get the perfect installation. As an added bonus, we have included a 10' hdmi braided nylon cable with gold plated connectors.

Mount Factory Heavy-Duty Full Motion Articulating TV Wall Mount - 40 in. - 70 in. HDMI cableMount-Factory-Heavy-Duty-Motion-Articulating

MOUNT FACTORY HEAVY-DUTY FULL MOTION ARTICULATING TV WALL MOUNT - 40 IN. - 70 IN. HDMI CABLE Reviews
Brand :    mount factory
Color :    Black
Model :    PRO-X6
Quantity :    1
Order click here :    normally ships in 24 hours
Speakers :    Best Av Furniture (mount factory product review) for Mount Factory Heavy-Duty Full Motion Articulating TV Wall Mount - 40 in. - 70 in. HDMI cable available ( Nov 2019 )
Price :    $48.99 (was $97.98)
  • Universal fit - fits vesa hole patterns from 200mm x 200mm to 400mm x 600mm
  • Extends out from wall or compresses flat for low profile use and features +/- tilt and 160 degree swivel
  • Heavy-duty mount; rated for televisions up to 100 pounds
  • Universal fit and compatibility for televisions from 42 - 70 in.
  • Includes magnetic level (color may vary) and 10' braided hdmi cable

VideoSecu MW380B3 Full Motion Articulating TV Wall Mount Bracket 37 -70 LED LCD Plasma HDTV up to 165 lbs VESA 684x400 600x400 400x400 200x200mm, Dual Arm pulls out up to 16 AW8

I used to install tvs for people professionally, so i have used many different mounting systems. I was looking for something cheap, but reliable to hang a 50" lg 50la6200 lcd tv. I looked at a lot of options both on online store as well as elsewhere before settling in this one. I am happy that i did! . . For starters, this comes with everything that you could possible need to hang your tv, with the exception of a 2 phillips head screwdriver and a drill. Included are a complete assortment of screws, bolts and washers (all neatly organized and labeled in individual packets), a double-sided spanner wrench, a very nice magnetic level, and even a 10' hdmi cable. The instructions say to use the "optional" expansion kit for larger tvs. Usually, this is code for "kit not included. " i was pleasantly surprised to find that that was not the case here. For once, the "optional" kit was actually included! . . Installation was a breeze for me, even without instructions since i already know how this works, but i found the instructions relatively easy to follow for those who need them. All of the various configurations for the expansion arms can get confusing, but just try each one until you find the right setup for your tv. . * please note *. There is one change to the instructions that i highly suggest, however. The instructions say to drill a 7/32" pilot hole into the stud for each mounting bolt. Then screw the bolt in with a phillips head screwdriver. When i first mounted this (i wound up moving it shortly thereafter), i followed the suggestions for the pilot hole. Sure enough the screw did thread in easily. A little too easily. The second hole from the top actually stripped out and i was not putting much force behind the screwdriver at all! when i moved this to the other side of the room, i decided to go with a smaller pilot bit. I used a 3/16" bit instead. Granted, you are not going to thread the bolt in with a screwdriver - you will need a 10mm socket - but doing it this way, those bolts are not going anywhere! you could probably get away with a 13/64" bit, but to really protect your expensive tv, i would want all of the bite i could get! . . I also found that the inside diameter of one of the washers was a smidge too small for the bolt to go through. I just enlarged it with a round needle file, but since they don't include any spares, if you don't have a file or another washer laying around, you'll need to get one. Just thought i'd throw that out there in the interest of full disclosure. . Once this was installed, i was impressed with not only the sturdiness, but also with the complete range of motion. This is fully articulated. You can put your tv pretty much anywhere you want to. The only thing it can't do is move your tv up or down, although you can tilt it to a certain degree.

The videosecu full motion articulating mount is designed for mid to large size lcd led plasma flat panel screen display. Constructed with high gauge steel, it handles screens up to 165lbs. This articulating mount supports tv vesa 684x400, 684x300, 600x400, 600x300, 600x200, 500x300, 400x400, 400x300, 400x200, 300x300, 200x200, 200x100mm. Dual arm design allows 160 degree side-to-side swivel (the max degree is depending on your display size), 15 degree forward and 15 degree backward tilt and extends the flat panel screen for perfect view positioning and reduce glare. The wall plate is 17. 5" wide, allowing it to be mounted into two standard wood studs 16" apart. Post installation level adjustment allows 3 degree rotation for perfect level in different view angles. How to ensure the mount compliance with your selected display? first, the weight of your display should be less than 165lbs. Next, mounting holes distance on the rear of tv must be less than 27" (684mm) horizontally and 16" (400mm) vertically. Last, your tv should be at least 37 inch. Otherwise, you will see the bracket. Notice: this mount fits most 37-60" tvs (vesa hole patterns from 200x200 mm (8x8") to 684x400mm (27x16")), some up to 65 70 inch tvs manufactured in recent 3 years

VideoSecu MW380B3 Full Motion Articulating TV Wall Mount Bracket 37 -70 LED LCD Plasma HDTV up to 165 lbs VESA 684x400 600x400 400x400 200x200mm, Dual Arm pulls out up to 16 AW8VideoSecu-MW380B3-Articulating-Bracket-200x200mm

Videosecu Mw380b3 Articulating Bracket 200x200mm (Av Furniture) FAQ.

This is holding my 52" on the wall with no problem. The mount takes a minute to put together because it is so versatile, but once you set it up for your tv, it's great. -Notice from Y. Guest, Aquitaine

Click to Show videosecu mw380b3 articulating bracket 200x200mm (av furniture) Details

Very nice wall mount for price. Little to no wobble at all. Only hilding a 12 pound tv now. Might not be as sturdy with older heavy tv's when extended out. Also, the brain team i had install this put it up upside diwn, but did not notice and it still looks great. Cant tell it affected anything. They had the mount plate already attached this way and i just bolted tv to plate in this upside diwn position! not quite sure hiw i would take it down now if removing tv leaving plate attached to it! but heck, it dure is not comkng off the mount! recommed it for the newer light tv's. Dont hang a 60 pound plasma on it!

Videosecu-mw380b3-articulating-bracket-200x200mm-(av-furniture) set picture

- G. RossBeen looking at wall mounts for years, thinking to wall mount my pc lcd monitors. I bought this one to instead mount a samsung 32" smart hdtv. I was amazed at the lower prices these days than before. I would buy this again if the day comes where i need another wall mount. It comes with everything you need. The hardest part for me was finding a stud. I also needed this to hang above my two desktop setting monitors, so i had to carefully measure the height from the floor of where i drilled the top hole of the part of the mount that fixes to the stud. . Other reviewers have said the hdmi cable featured did not come with the mount. Mine did (2/11/16). And a good set of instructions , and the level which worked fine for its purpose (to plumb the part that screws to the stud). And as mentioned, by others, all the mounting hardware imaginable, which is labelled. Use or implementation is simple. The backplate mounts to the tv in all the vesa configs shown (mine was 200x200). It has a what videosecu calls a 'hook' and the tv plate of the mount is slotted and fits over a tang (the 'hook') on the swivel or main part of the mount. As the whole thing swings away from the wall, you can see, rather than feel, what you are doing when you hang the tv to the rest of the mount. This hook/tang system is loose. Not loose enough for the set to fall free from the mount, but, loose enough to where the tvt can 'tilt' horizontally. Which is a good thing if you did not install the mounting bracket plumb on the stud. And though it does tilt, it is easy enough to level my tv once i have it positioned for viewing. And i found that i could tighten a locking nut with the included wrench to stop this 'tilting'. . In short i love the mount. The mount is heavy, made of metal and very robust. The articulating arms do not swing easily, so once you have the tv where you want it , the tv stays there. Highly reco this and an easy product to give 5 stars to. My first time and it all went well without a hitch or glitch. Lg

Vervideosecu ml531be tv wall mount for most 22"-55" led lcd plasma flat screen monitor up to 88 lb vesa 400x400 with full motion swivel articulating 20 in extension arm, hdmi cable & bubble level wp5. . I just finished installing this videosecu ml531be tv wall mount over our fireplace with my 40" tv today. . I chose this mount after much research and deliberation, and i'm *very* glad that i did. . The mount arrived within the 2 day prime shipping window, and when i opened the shipping box, i found that the mount was packaged very well in an attractive retail box, complete with very easy to follow instructions, with all the hardware and screws for just about every tv and configuration, a wrench and hex key, and a small torpedo level and a hdmi cable. Perfect! . . The mount itself is very solid and secure, looks impressive, and there is almost no play in the pivot points. In fact, the pivot points are all adjustable for tightness or looseness depending on one's personal preference. There are secure tightening points for all adjustments of level and plumb. We used the mount with a 40" tv 200x200 vesa configuration, so we didn't need the extra brackets for the wider spacing that were included. The mount allows the 40" tv to be swung totally perpendicular to the wall so we can see the tv from another room at times. . If i ever need to mount another flat panel of a large size, this is the mount i will choose again. It's definitely a bargain for what you get. . (i am not affiliated with the seller or with videosecu, and i did not receive the mount for any promotion. I paid the full listed price of $24. 99 (an absolute bargain imo) and received no compensation for this review. I just believe in supporting merchants who provide an excellent product at an excellent price). . Bluegrass picker

J. Palmer, Newfoundland and Labrador

VIDEOSECU MW380B3 FULL MOTION ARTICULATING TV WALL MOUNT BRACKET 37 -70 LED LCD PLASMA HDTV UP TO 165 LBS VESA 684X400 600X400 400X400 200X200MM, DUAL ARM PULLS OUT UP TO 16 AW8 Advantages
Brand :    videosecu
Color :    Black
Size :    37-70 inch
Weight :    17.00 pounds
Model :    MW380B
Quantity :    1
Order click here :    normally ships in 24 hours
Speakers :    Best Av Furniture (videosecu product review) for VideoSecu MW380B3 Full Motion Articulating TV Wall Mount Bracket 37 -70 LED LCD Plasma HDTV up to 165 lbs VESA 684x400 600x400 400x400 200x200mm, Dual Arm pulls out up to 16 AW8 available ( Nov 2019 )
Price :    $51.99 (was $64.99)
  • Fit 16 inch apart wood studs; free hdmi cable and standard mounting screws included
  • Supports display up to 165 lbs; adjustable tilt +15/-15 degrees and swivel side-to-side for comfortable viewing angle
  • Arm fold less than 3" or extend 16" from wall ; post-installation level adjustment allows the tv to perfectly level
  • Articulating arm tv wall mount fits 37" 40" 42" 46" 47" 50" 52" 55" 58" 60" 62" 63" 65" 70" lcd led plasma display; mounting hole pattern compatible from 200x200 300x300 300x200 400x200 400x300 400x400 600x400 684x300 684x400mm
  • Easy installation and adjustment

Pyle Speaker Wall Mount, Pair of Speaker Stands, Sound Bar Speaker, Large Small Speakers, Center Channel Speaker Wall Mount, Adjustable & Extendable Length, 110 Lbs Capacity, Black PSTNDW17

The pyle soundbar wall mount brackets provides rugged and reliable speaker placement. Adjustable and extending bracket lengths allow for universal soundbar speaker compatibility - they can also be used to mount center channel speaker systems. Install the holder brackets on any wall or flat surface for safe and convenient speaker placement. Reinforced engineered steel construction supports a weight capacity up to 110 lbs. Perfect for home or office use. Features: includes (2) speaker bracket arms rugged & reliable wall mounting universal sound bar / speaker compatibility adjustable & extending bracket lengths convenient hanging wall mount design mountable to virtually any wall or flat surface perfect for home or office use technical specs: construction material: engineered steel adjustable arm length (distance from wall): 6. 7 - 11. 8 -inches maximum speaker weight capacity: 110 lbs. Single bracket dimensions (l x w x h): 7. 1 x 3. 9 x 1. 6 -each sold as: pair weight: 2. 2 lbs.

Pyle Speaker Wall Mount, Pair of Speaker Stands, Sound Bar Speaker, Large Small Speakers, Center Channel Speaker Wall Mount, Adjustable & Extendable Length, 110 Lbs Capacity, Black PSTNDW17Pyle-Speakers-Adjustable-Extendable-PSTNDW17

PYLE SPEAKER WALL MOUNT, PAIR OF SPEAKER STANDS, SOUND BAR SPEAKER, LARGE SMALL SPEAKERS, CENTER CHANNEL SPEAKER WALL MOUNT, ADJUSTABLE & EXTENDABLE LENGTH, 110 LBS CAPACITY, BLACK PSTNDW17 Overview
Brand :    pyle
Model :    PSTNDW17
Quantity :    1
Order click here :    normally ships in 24 hours
Ce :    Best Ce Accessory (pyle product review) for Pyle Speaker Wall Mount, Pair of Speaker Stands, Sound Bar Speaker, Large Small Speakers, Center Channel Speaker Wall Mount, Adjustable & Extendable Length, 110 Lbs Capacity, Black PSTNDW17 available ( Nov 2019 )
Price :    $24.74 (was $29.99)
  • Easy installation: the shelf speaker wall mount is designed to be mountable on to virtually any wall or flat surface with a weight capacity of up to 110 lbs.
  • Adjustable bracket length: these pyle shelf speakers feature adjustable and extending bracket lengths that allow for universal speaker compatibility. its universal fit makes it suitable for heavy and light speakers.
  • Durable wall mounting: the wall mount speakers are made of reinforced engineered steel, giving you extra support and peace of mind for safe and convenient placement.
  • Versatile use: the universal speaker mount is adaptable enough to be used in a variety of settings. great for home or office use.
  • Universal compatibility: the speaker wall mounts features a universal sound bar and speaker compatibility. can be used to mount center channel speaker systems.

Legrand - Wiremold CMK50 Cord Mate II Kit- Raceways Cord Management Kit to Hide Cables, Cords, Wires- 4 Channels, White

Especially suited for covering home entertainment wires, speaker cables, tv/video cabling and home office wiring. Organize and hide cords and cables easily. Self-adhesive backing makes for easy installation. Stylish design complements any interior setting. Paintable.

Legrand - Wiremold CMK50 Cord Mate II Kit- Raceways Cord Management Kit to Hide Cables, Cords, Wires- 4 Channels, WhiteLegrand-Wiremold-Raceways-Management-Channels

LEGRAND - WIREMOLD CMK50 CORD MATE II KIT- RACEWAYS CORD MANAGEMENT KIT TO HIDE CABLES, CORDS, WIRES- 4 CHANNELS, WHITE Highlight
Brand :    wiremold
Color :    White
Size :    1 Pack
Weight :    1..4 pounds
Model :    CMK50
Quantity :    1
Order click here :    normally ships in 24 hours
Home Improvement :    Best Hardware (wiremold product review) for Legrand - Wiremold CMK50 Cord Mate II Kit- Raceways Cord Management Kit to Hide Cables, Cords, Wires- 4 Channels, White available ( Nov 2019 )
Price :    $17.58 (was $24.99)
  • Big money saving cable raceway pack: the kit includes 12 connector parts: 4 cordmate ii cord channels, 3 c59-couplings, 2 c56-flat elbows, 1 c57-inside elbow, 1 c58-outside elbow, 1 c51 t-fitting.
  • Cord cable management kit: the cmk50 cord mate ii kit is the perfect cord organizer. it contains everything to conceal and organize those messy cables. each package contains 4 cordmate ii cord channels of 31. 8 x 3. 7 x 2. 7 inches. that's 120 inches of cable concealment.
  • Simple and easy installation: wiremold cable cover kit offers flexibility while installing the product. just peel and then press to install the wire covers. the self-adhesive backing makes it easy to install on a baseboard or a wall. if you need a different size, simply cut the covers to your desired length.
  • 1 best seller cord cover: wiremold cmk50 cord mate ii kit is the best seller in cable raceways, and it also comes with a manufacturer's warranty.
  • Sleek and stylish raceways: this wiremold white cord cover kit has a slim and sleek design and blends with any décor. its channels can be painted to match the color of your wall. this cord cover is ideal for phone wires, cables, power cords and speaker wire.

TV Wall Mount Bracket Full Motion Dual Articulating Arm 37-70 Inch LED, LCD, OLED, Flat Screen,Plasma TVs up to 132lbs VESA 600x400mm Tilt, Swivel Rotation HDMI Cable PERLESMITH

Very sturdy and strong, currently with a 40 inche tv. It bring everything you need to be mounted and the instructions are very easy to follow. Update. Just bought a 55 tv and the mount works great still.

Description: the full motion mount fits 37" to 70" flat panel tvs with vesa mounting hole patterns within 200-600mm wide and 100-400mm high. This tv mount is constructed with heavy duty solid steel with powder-coated black finish providing security and stability. Adjustable tilt, swivel, rotation and extension place your tv in perfect viewing angles. The lock and release design secures the tv into place for additional security and offers convenient installation, articulating arm design allows display to be folded parallel to wall to save space. Please check whether the mount is suitable for your tv: first, please check your wall for wood studs, it can't be used on concrete wall or drywall alone. Next, the weight of your tv should be less than 120lbs. Then, mounting holes distance on the back of tv must be less than 24" (600mm) horizontally and 16" (400mm) vertically. Your tv should be at least 37 inch. Otherwise, you will see the bracket. Finally, please check possible blocked cable/input. Specifications: fits 37" to 70" flat panel tvs supports tv weight up to 132lbs fits vesa mounting hole patterns: 600x400mm/ 400x400mm/ 400x300mm/ 300x300mm/ 300x200mm/ 200x200mm/ 200x100mm tilt adjusts 15 degrees forward or 5 degrees backward swivel up to 180 degrees extends up to 16" and folds 2. 8" from the wall to save space wall mounting studs distance up to 16" rotate 6 degrees for perfect tv level adjustment package includes: 1x tv wall mount 1x standard mounting hardware 1x user manual 1x 6ft high speed hdmi cable 1x 3-axis magnetic bubble level 5x cable ties

TV Wall Mount Bracket Full Motion Dual Articulating Arm 37-70 Inch LED, LCD, OLED, Flat Screen,Plasma TVs up to 132lbs VESA 600x400mm Tilt, Swivel Rotation HDMI Cable PERLESMITHBracket-Articulating-600x400mm-Rotation-PERLESMITH

Bracket Articulating 600x400mm Rotation Perlesmith (pslfk1) FAQ.

Bought two for my new tvs, the installation was simple. All the hardware and more was included plus simple instructions for setting everything up. Both tvs have been mounted for a couple weeks now no issues at all with the mounts at all. -Notice from . Arnett, Champagne-Ardenne

Click to Show bracket articulating 600x400mm rotation perlesmith (pslfk1) Details

Extremely well-built. Mounting kit includes everything you need for wood stud mounting (but i bought toggle bolts for a metal stud installation and it worked fine). Great adjustability for tilt and fine adjustment for leveling. Excellent value.

Bracket-articulating-600x400mm-rotation-perlesmith-(pslfk1) set picture

- Q. FabianAmazing design ! very functional, probably could hold much more than it is rated for, as long as it is installed according to directions. Easy to install, best product on the market for the price !

This was the first mount i ve bought from them so i was nervous to get it and put it up. . I usually buy from monoprice. Com. I mounted my 55inch tcl roku tv and it worked great! i would definitely buy again to mount another tv!

T. Meredith, Auvergne

TV WALL MOUNT BRACKET FULL MOTION DUAL ARTICULATING ARM 37-70 INCH LED, LCD, OLED, FLAT SCREEN,PLASMA TVS UP TO 132LBS VESA 600X400MM TILT, SWIVEL ROTATION HDMI CABLE PERLESMITH Spotlight
Brand :    perlesmith
Color :    Black
Model :    PSLFK1
Quantity :    1
Order click here :    normally ships in 24 hours
  • Universal design: full-motion wall mount for 37" - 70" flat-panel tvs up to 132lbs, vesa(mounting hole pattern) - compatible faceplate fits vesa 200x100mm (8"x4") 200x200mm(8"x8") 300x200mm (12"x8") 300x300mm (12"x12") 400x300mm (16"x12") 400x400mm (16"x16") 600x400mm (24"x16"), wall mounting studs distance up to 16" only.
  • Adjustable optimal viewing: +5 /-15 tilt, +/-90 swivel (maximum swivel angle depends on tv size) and +/-3 rotation for maximum viewing flexibility. choose the perfect angle to view the screen from anywhere in the room. post-installation level adjustment allows the tv to level perfectly.
  • Product includes: standard mounting hardware, 6 ft hdmi cable, 3-axis magnetic bubble level, 5 pieces pack of cable ties, and our incredible 5-year warranty and friendly customer service. we provide what you need to make installation as easy and convenient as possible!
  • Safe to use: rest assured that your tv is in safe hands. this heavy-gauge tv mount has high standards, holding 37" - 70" tvs weighing up to 132lbs, which are tested to hold 4 times the weight they're rated to based on ul standard.
  • Save space: dual articulating arms that retract 2. 8" from the wall in home position to save space and also extend to a maximum 16" from the wall. therefore saving you some valuable space and adding a nice, neat appearance to your household.
Price :    $19.79 (was $45.99)
Ce :    Best Consumer Electronics (perlesmith product review) for TV Wall Mount Bracket Full Motion Dual Articulating Arm 37-70 Inch LED, LCD, OLED, Flat Screen,Plasma TVs up to 132lbs VESA 600x400mm Tilt, Swivel Rotation HDMI Cable PERLESMITH available ( Nov 2019 )

NavePoint 250ft In Wall Audio Speaker Cable Wire CL2 16/2 AWG Gauge 2 Conductor Bulk White

Navepoint's 16 gauge speaker cable is the perfect solution for wiring your home, car, or office stereo system. Connect your speakers to amplifiers or recievers. Made from professional grade materials, this cable features 64 strands of 0. 16mm copper clad aluminum. This cable is available in bulk 250 ft length with white pvc jacket and the convenient pull box packaging with clip makes it easy to store for future use.

NavePoint 250ft In Wall Audio Speaker Cable Wire CL2 16/2 AWG Gauge 2 Conductor Bulk WhiteNavePoint-250ft-Audio-Speaker-Conductor

NAVEPOINT 250FT IN WALL AUDIO SPEAKER CABLE WIRE CL2 16/2 AWG GAUGE 2 CONDUCTOR BULK WHITE Summary
Brand :    navepoint
Color :    White
Model :    4330098819
Quantity :    1
Order click here :    normally ships in 24 hours
Ce :    Best Consumer Electronics (navepoint product review) for NavePoint 250ft In Wall Audio Speaker Cable Wire CL2 16/2 AWG Gauge 2 Conductor Bulk White available ( Nov 2019 )
Price :    $23.95
  • 2 high quality (64 strands of 0. 16) 16 awg conductors.
  • Made of copper clad aluminum (cca).
  • The perfect choice for your home, car, or office audio needs.
  • Convenient pull box for diy projects and professional installers alike.
  • Top quality design and construction.

Mount-It AV Component Media Stand, Glass Shelves, Audio Video Components, Storage Xbox, Playstation, Speakers, Cable Boxes, 88 Lb Load Capacity, Black Silk Mi-867

Looking for a beautiful black multi-level media component stand to complement your tv? style and grace. Mount-it's mi-867 this audio video four tiered tower is meant to bring convenience, style, and function back into the contemporary home. The black shelves and three steel supports provide a stable organizer for your sound systems. The large gaps between the tiers creates a healthy air flow for your equipment, ensuring that they don't overheat or operate at an unsafe temperature. The alternative benefit to the open space design, is the ability to reach your products easily and conveniently without unplugging, opening, or closing anything features: the mi-867 unsightly cables no longer need drilling, zip tying, or fastening because our av stand is constructed with cable management in mind. The holes located on the rear provide the primary leads for your cables. As an alternate method, you can use the corner gaps at the back of each glass shelf to feed your cables down. The corners on the shelves make this a great piece for the corner of your living room or directly adjacent to a cabinet or desk. All four tiers can create a number of combinations to suit your specific needs: audiophiles can store mixers, controllers, amplifiers, switchers, routers, and pre amps. Common applications are for home theaters, gaming, speakers, amplifiers, cable boxes, servers, pcs, and tvs. Specifications : * material: glass, metal * column material: steel * column size: . 8, 1. 5 inches * column color: black * product dimensions (l*w*h): 22*16. 5*27. 5 inches * supports flat panel tv's up to 88lbs. * shelves: 4 * glass finish: black silk screen * glass thickness (top-bottom): 6/4/4mm * cable management: yes

Mount-It AV Component Media Stand, Glass Shelves, Audio Video Components, Storage Xbox, Playstation, Speakers, Cable Boxes, 88 Lb Load Capacity, Black Silk Mi-867Mount-Component-Components-Playstation-Speakers

MOUNT-IT AV COMPONENT MEDIA STAND, GLASS SHELVES, AUDIO VIDEO COMPONENTS, STORAGE XBOX, PLAYSTATION, SPEAKERS, CABLE BOXES, 88 LB LOAD CAPACITY, BLACK SILK MI-867 Features
Brand :    mount-it!
Color :    Black
Model :    MI-867(HF201B)
Quantity :    1
Order click here :    normally ships in 24 hours
  • High weight capacity: each shelf is made from tempered glass for maximum strength and security. they each have an 88 lb weight capacity that can maintain most av and speaker equipment. supports speakers, lcd or led tvs, consoles, cable boxes, amplifiers, etc.
  • Four shelves: thick tempered glass paired with sleek aluminum legs. this furniture stand has four different levels for audio video component equipment. these shelves are ideal for homes, businesses, lobbies, hotels, bedrooms, living rooms, dorms, and other applications
  • Dimensions: each shelf is 22 inches wide and 17 inches long which provides plenty of space for the modern led and lcd display. the gaps between each shelf are 7. 25" except for the top shelf which has a gap of 11" which can accommodate larger appliances
  • Cooling airflow: each shelf has been architecturally engineered for maximum airflow, which will keep your systems from overheating and operating at dangerous temperatures. the top tier is raised the highest to allow for the most amount of airflow
  • Stylish appearance: the metal frame and glass shelves are both silk black to compliment modern technology. this storage unit comes with cable management systems in the back panel to ensure your cords are neatly organized and hidden from view.
Price :    $82.99
Office Sale :    Best Office Sales (mount-it! product review) for Mount-It AV Component Media Stand, Glass Shelves, Audio Video Components, Storage Xbox, Playstation, Speakers, Cable Boxes, 88 Lb Load Capacity, Black Silk Mi-867 available ( Nov 2019 )

ECHOGEAR Full Motion Articulating TV Wall Mount Bracket 37-70 inch LED, LCD, OLED Plasma Flat Screen TVs w/ VESA patterns up to 600 x 400 - 16 Extension - EGLF1-BK

Seriously glad i purchased this mount. I've never had to mount a tv before but in this house it was my most feasible option. What i mounted was a 55" 9000 series samsung, which was honestly heavier than i thought it was gonna be but, i'm not worried at all. I can pull it all the way out and feel totally confident it's not coming down. People actually get sketchy when i do that lol. Reminder, if you install it wrong it's not the mounts fault. If you're mounting any kind of tv, it's in your best interest to make certain you are center of the studs and you pre-drill the holes for the lags provided. If you're off of you go in crooked you will most certainly split your stud. The extra 5 minutes of your time is cheaper than a new tv and whatever it falls on.

Featuring up to 150 of smooth swiveling capability, this large full-motion tv mount is a real mover. Not a shaker. Safety tested and ul certified to hold up to 132 lbs, you can rest assured your 37" - 70" led, lcd or plasma tv will be safe on the strong arm of this echogear tv mount. What the h is "ul certified"? it means we've tested this tv mount to verify that it will hold 4 times the weight rating and some safety science guys (that's a real thing) certified it. We'll do the math for you. 4 x 132 528 lbs! tech specs:vesa compatibility: 200x100 up to 600x400 (universal increments) tv extension from wall: 16" profile from wall (recessed) 2. 6" swivel: up to 150 degrees side-to-side (37" tv) tension adjustable? (for smoother/stiffer articulation): yes, using 7/32" hex key on joint bolts tilt: 5 up and 15 down post-install tv leveling adjustment: 3. 5 left or right wall plate dimensions: 17. 1" (w) x 10. 2" (h) max mounting hole dimensions: 16" (w) x 8. 9" (h) wall plate openings for in-wall cable management: 5. 6" (w) x 7. 6" (h) - two openings on each side construction: 100% high grade steel with plastic end caps for tv interface favorite color: echogear orangehdmi: v1. 4 high speed cable with bandwidth to support 1080p, 3d, and 4k/uhd 2160p picture 60 fps length: 6 ft. Install hardware included: 5/16" x 2. 75" lag bolts (4) lag bolt washers (4) m4 x 12mm screws (4) m4 x 35mm screws (4) m6 x 12mm screws (4) m6 x 35mm screws (4) m8 x 16mm screws (4) m8 x 20mm screws (4) m8 x 35mm screws (4) m4/m5 washers (4) m6/m8 washers (4) 22mm (7/8") tv spacers (4)

ECHOGEAR Full Motion Articulating TV Wall Mount Bracket 37-70 inch LED, LCD, OLED Plasma Flat Screen TVs w/ VESA patterns up to 600 x 400 - 16 Extension - EGLF1-BKECHOGEAR-Motion-Articulating-Bracket-patterns

Echogear Motion Articulating Bracket Patterns (eglf1 bk) FAQ.

It isn't often that you find a product that's intended to be hidden behind something else that is as well designed and as well made as this one. From the smoothness of the extension operation to the finish paint, it's a work of art. While the manufacturer says it's designed to hold up to 132 pounds, it could probably support a refrigerator. There just isn't anything not to like about this tv wall mount. . The instructions are simple, well illustrated, clear and complete. The hardware package is totally adequate for any installation on a wall framed with conventional wood studs 16 inches on center. I can't speak to mounting on masonry walls or walls framed with light steel studs. The provisions for vertical tilt and for side-to-side adjustment allow for avoiding glare in almost any setting. . Notes to echogear:. . (1)this item would be perfect if it permitted some flexibility in the width of the spacing between studs. That could be accomplished by offering an expanding "arm" or bracket, like the arms the tv set hangs from, to span irregular vertical gaps. That could be an add-on extra. . (2) some flexibility in the final vertical positioning would be helpful. That could be accomplished by modifying the brackets that attach to the back of the tv so that the tv could hang a little higher or a little lower. -Notice from S. Cindy, British Columbia

Click to Show echogear motion articulating bracket patterns (eglf1 bk) Details

This is my third full motion articulating tv wall mount. This one is the best by far. Lightweight, easy to follow instructions and strong enough to hold up 132 pounds. No new flat screen weighs that much (or not that i have seen) my new samsung weighs under 40 pounds, so this mount is perfect. A couple of things, it will fit flat against the wall with everything folding together. So it does not project the tv out into the room. Next, it will extend out a full 16". I had a cavity set into the wall to mount a tv. The contractor must not have know that all tv's were flat screen and he made it 16" deep. A problem for my old mount and why i replaced it. Finally, even i can learn after two units and i released some of the tension on the swivel bolts. Turning them somewhere between 1/4 and 1/2 a turn. That made all the difference. Now it functions smoothly, before it was too tight to adjust without serious effort. I am still using the old one at another location and loosened the bolts on it. Works better, but clearly inferior to the echogear.

Echogear-motion-articulating-bracket-patterns-(eglf1-bk) set picture

- N. BertieWe selected this item based on the positive online store reviews. It was used to wall mount a 65 in sony lcd tv. My son, an audio/visual technician at a top las vegas luxury resort hotel, is very accustomed to handling tasks and gear like this, and he mounted the tv for us. He had positive comments about this wall mount. It is very heavy duty and easily handles our 65 in lcd tv, which weighs about 50 pounds. We did notice that, after mounting, one of the hdmi ports on the tv is obstructed. We are still fine, despite this obstruction, since the tv has other available ports. The directions were useful when questions arose. Do not expect to change the vertical tilt of the tv after you mount it. Rather, find the desired angle for the vertical tilt, then lock it in. Note: left and right motion is readily available after mounting, as is the distance from the wall - simply pull the tv out and turn it to the left or right as desired. We are satisfied with this wall mount and recommend it.

We picked this mount based on a friend's recommendation. Even though our studs were 24" on center and we couldn't use this mount directly, we picked up a nice 3'x1' cherry board, finished that nicely and attached this mount to that. In the end, with the additional 1" thick board, this mount and the spacers needed to clear the soundbar on the tv, the glass surface of our new set sits about 6. 5" from the wall. Certainly not tight, but acceptable given that we can tilt it down a few degrees and side to side as needed. This mount is very sturdy. I was surprised by its weight, but that's what it takes to hold up a 60 pound tv, so i feel confident that it will do its job without drama. The install was straightforward and not at all difficult. I would recommend this unit to others.

D. Diana, New Jersey

ECHOGEAR FULL MOTION ARTICULATING TV WALL MOUNT BRACKET 37-70 INCH LED, LCD, OLED PLASMA FLAT SCREEN TVS W/ VESA PATTERNS UP TO 600 X 400 - 16 EXTENSION - EGLF1-BK Benefit
Brand :    echogear
Size :    37-70 inch
Weight :    18.00 pounds
Model :    EGLF1-BK
Quantity :    1
Order click here :    normally ships in 24 hours
  • Pulling out to 16" and back in to 2. 6" from the wall gives your tv smooth moves. swivel your tv 150 degrees to the left or right to get all the views your room could ever need.
  • Our heavy-gauge universal tv mount holds 37"-70" tvs weighing up to 132lbs. don't worry, we'll do the heavy lifting: echogear tv mounts are tested to hold 4 times the weight they're rated to. safety tested - ul certified.
  • Mounting has never been so easy: 30 minutes to install on 16" studs, with all hardware included and pre-divided. our u. s. -based customer care team members will even pick up the phone on sundays. seriously.
  • Feel the love with our 5-year warranty - included with all of our tv mounts.
  • Window glare bugging you? 15-degree tilt capability makes adjustments easy. no tools, no fuss, no hands. just kidding, you'll need your hands.
Price :    $60.00 (was $79.99)
Home Theater :    Best Av Furniture (echogear product review) for ECHOGEAR Full Motion Articulating TV Wall Mount Bracket 37-70 inch LED, LCD, OLED Plasma Flat Screen TVs w/ VESA patterns up to 600 x 400 - 16 Extension - EGLF1-BK available ( Nov 2019 )

Pinpoint Mounts AM15-Black Universal Center Channel Speaker Wall Mount

The pinpoint mounts am15 universal center channel speaker wall mount has been designed for maximum flexibility and compatibility for today's home theater speakers. Sold as a single mount, the am15 offers full flexibility for mounting center channel speakers up to 30 lbs. And depths from 7-inch to 11. 5-inch . Simple 2 "l-inch bracket design has adjustable arm for providing the correct depth and unlimited width. As most center channel speakers do not come with traditional mounting points, the am15 is designed to rest the speaker on the arms using the included isolation pads providing a solid and vibration free mounting. All mounting hardware is included. The am15 is available in black.

Pinpoint Mounts AM15-Black Universal Center Channel Speaker Wall MountPinpoint-Mounts-AM15-Black-Universal-Channel

PINPOINT MOUNTS AM15-BLACK UNIVERSAL CENTER CHANNEL SPEAKER WALL MOUNT Feature
Brand :    pinpoint mounts
Color :    Black
Weight :    2.95 pounds
Model :    AM15-Black
Quantity :    1
Order click here :    normally ships in 1 to 3 weeks
Speakers :    Best Ce Accessory (pinpoint mounts product review) for Pinpoint Mounts AM15-Black Universal Center Channel Speaker Wall Mount available ( Nov 2019 )
Price :    $29.99
  • Sold as a single unit to mount one center channel speaker
  • Supports speaker from bottom by 2 "l-inch arm brackets.
  • Unlimited width adjustment.
  • Supports speakers up to 30 lbs. (13 kg)
  • Depth adjustment from 7-inch to 11. 5".

mount-it mi-803 floating wall mounted shelf bracket stand for av receiver, component, cable box, playstation4, xbox1, vcr player, blue ray dvd player, projector, load capacity 66 lbs, three shelves, tinted tempered glass Price : 42, was : 54 as 2018-01-19
USUKDEFRESITJPCNCAGlobal
United States
Great Britain
German
France
Spain
Italy
Japan
China
Canada
World Wide
Mount Mi 803 Component Playstation4 Projector (Mount It) Reviewed by on puqus.com

Top mount mi 803 component playstation4 projector (mount it) Content

The F.A.Q. for mount-it mi-803 floating wall mounted shelf bracket stand for av receiver, component, cable box, playstation4, xbox1, vcr player, blue ray dvd player, projector, load capacity 66 lbs, three shelves, tinted tempered glass

This was a pretty nice product. It took me a little time to figure out how to install it, but it was pretty easy in the end. The pieces went together easily and made for a nice clean look when done. The cords can go through the back and be contained and hidden. The shelf is sleek and clean and can hold a normal sized cable box or a dvd player. If you have a tv mounted on the wall and have components that need to go on a shelf, this is a good way to handle that.

A number of questions have been asked here.

Showing 20 Q&A on Mount-MI-803-Component-Playstation4-Projector

(0) Question: What is the size are the glass shelf


(1) Question: Whats the total distance from the wall to the front edge of shelf?


(2) Question: Are the shelves adjustable?


(3) Question: Is this suitable for a turntable?


(4) Question: What is the ft-lbs the screws should be torqued to?


(5) Question: What is the width of the center mounting bracket. doing molding and i need to get the space ready?


(6) Question: Has anyone had a subwoofer successfully on the top shelf? i want an xbox one, cable box, and subwoofer on these shelves.


(7) Question: How wide is the bracket?


(8) Question: Was anyone's wall plate different from the wall plate shown in the assembly instructions? my wall plate has is smaller and has 6 holes - the instructions show a wall plate with 7. is it ok to put it up? i assume so.


(9) Question: Can the shelf be easily remove from the mount, to be used as a temporary mount for a speaker


(10) Question: Can you paint it to match the color of the wall?


(11) Question: The "wall plate" piece that was sent with the mount-it was very small & looks different then the illustrated picture? will this matter?


(12) Question: Can it be mounted in corner


(13) Question: Is the glass shelf well attached to the bracket or is there risk of it detaching / falling - will be using it near but above children


(14) Question: Can you hide cables behind mounting bracket?


(15) Question: What is the width of the mounting bracket that goes on the wall? i know the length appears to be 14. 7


(16) Question: What are the dimensions of the mounting bar? can you install a receptacle behind it?



(note) Question: where/how to get Mount It (manufacturer's brand) accessories & similiar Mount It's products

Click to Show/Hide the Answer
Answer:

Click on the marked text to copy to Clipboard

Absolutely awesome! very sleek and good looking design! i purchase this in conjunction with the mounting dream md2268-mk tilt tv wall mount bracket for 26-55 inches tv with vesa from 75x75mm to 400x400mm, black to store my xbox one. The shelf had ample room to fit the unit without issue. . The installation method that i chose was to assemble directly into the sheet rock with the supplied anchors. . I would have given 5-stars but the assembly instructions could have been a little more user friendly. However with a little time, patience and re-assembly, i manage to figure it out.


Av Furniture, BestsellersTop Mount Mi 803 Component Playstation4 Projector (Mount It) FAQ Content

Best mount mi 803 component playstation4 projector (mount it) in review

I got this shelf to mount my av receiver out of the reach of a toddler. For that it does its job well. I have it mounted above my tv, slightly offset so i could rotate the arm and have the receiver sitting closer to the wall (it sticks out a good way if pointed straight out from the wall). The shelf looks nice, is the perfect size for my receiver and is quite sturdy.

W. Julia, Nevada

You might like to see Rolling tv cart mobile tv stand up to 70 inch led, lcd, plasma, flat panel tv displays monitors camera top tray middle shelf. universal mount solid, durable, all steel constructed, height adjustable tv cart universal tv mount and one adjustable middle shelf. recommended for up to 70" flat panel tv (box said 65", technical -elitech rolling tv cart mobile tv stand up to 70 inch led, lcd, plasma, flat panel tv displays monitors camera top tray middle shelf. universal mount wheels.
  • Attribute: The Tv Cart Loading Capacity Is 100 Lbs. Middle Shelf Loading Capacity: 10 Lb.
  • Attribute: Height Of Tv Is Adjustable From 40. 5" To 60" At 2" Incremental.
Bargain Elitech Rolling Displays Monitors Universal (Av Furniture) El150065 Elitech Rolling Displays Monitors Universal
Or you might like to consider Clovertale Home Outlet Wall Mount Holder Alexa Echo Dot, Bose, Anker, Home Mini Round Speakers Ac Wall Home Outlet Mount Saves Space And Allows Various Speakers (home Mini, Alexa Echo Dot, Anker, Bose, Round Puck Speakers) To Mount On The Wall. Makes A Great Christmas Holiday -Clovertale Home Outlet Wall Mount Holder Alexa Echo Dot, Bose, Anker, Home Mini Round Speakers Accessories
  1. Attributes: Flexible Wings That Allow Various Sized Speakers To Slide And Lock In Works For Horizontal And Vertical Ac Wall Outlets. Comes With 3m Vhb Double Sided Tape For Additional Security So The Mount Will Not Fall Off.
  2. Attributes: No Screwdrivers Or Tools Required, Just Place Your Speaker In And Plug It In, Installs In Seconds. Great For Bathrooms, Kitchen, Garage And All Other Rooms. Don't Want To Install It On Your Outlet? Use The Included Double Sided Tape To Stick It Anywhere! Makes A Great Christmas Holiday Gift!.
Lower Price Clovertale Outlet Holder Speakers Accessories (Home Furniture And Decor) Echo Dot Wall Mount Clovertale Outlet Holder Speakers Accessories (Fstop

. Ross, Bury says

Looks so cool on the wall. Had it installed under a sound bar and a samsung 60" tv. It looks classy. The cable guide hides 3 hdmi cables and 2 power cords without a problem. I do wish there was an extension of the cable guide which extends about 6" below the unit to cover my plug and the outlet which is directly under the bottom shelf. Oh well, no big deal. As of now, it is holding a cable box and bluray player. I have left the bottom shelf empty for now; just the hdmi is showing. I would recommend this. Good purchase

Z. Cunningham, Hillingdon

I must stop reading the poor reviews when i buy from online store. I delayed my purchase of this wall mount for months due to some of the reviews on this forum. I couldn't find anything similar so i took a gamble. My first impression once unpacked was the high quality of the components and finish, first class with beautiful high quality glass. I fully assembled and wall hung it 30 minutes. Everything fitted together perfectly and it looks amazing. Don't hesitate. Its worth every penny and very easy to assemble. Ignor the poor reviews. I suspect some of these poeple have never picked up a screw driver.

D. Neva, Kansas says

Surprised at how quick and easy it went together (i put it together by myself in about 10 minutes) and the wall mount was a very simple bracket that mounted right into the sheetrock with some screw inserts. I didn't even screw it into studs and it has no problem holding my cable box, stereo receiver and then have my phone charger on the top rack. All of the cords fit nicely down the center to hide them. I also like how you have the option of glossy or matte glass shelving (depending on the side of the glass you choose to face up/down).

F. Edna, Texas

We ordered this shelving system because we were mounting our 46" tv on the wall for the first time and had nowhere to keep the components, and more importantly we didn't want the tangle of cords coming down the wall from the tv and 3 accessory components. . It was easy to build, sturdy, and nice looking, and overall we are satisfied with only one exception: the back of the unit, which the cords from each shelf are supposed to go through a cutout and all come out the bottom to be plugged in is far too tight for more than two cords. We were only able to feed the tv power cord and the coaxial cable for the tv through before it was "full. ". . We ended up mounting an outlet strip on the wall behind where the tv was tilted outward, and running the cords for the dvr, dvd player, and video game console upwards from their shelves and plugging them in up there. We were left with one unsightly cord (the main power cord from the outlet strip) running down the wall and directly to the outlet below. If the glass shelves of the unit didn't sit flush against the wall, we could have run the cord along the outside of the cord keeper behind the shelves, and it wouldn't have been so obvious, but that wasn't possible because the shelves do sit flush against the wall. . The setup still looks better than it would without the unit, but the power cord situation was disappointing, since the fact that they would be hidden was one of the main reasons we chose this product.

L. Widmer, Dudley says

I have had this mount installed on my wall for several months now and thought i would post a review on it. I have my verizon fios box and my ps4 on it and i am not afraid anything will fall. It is extremely sturdy and well made. It looks extremely modern and goes nicely with my a v setup. Below is a list of my pro's and con's. . Pro's. -inexpensive. -easy to install. -looks fantastic and good build quality. . Con's. -shelves could be a few inches larger to accommodate for large boxes such as dvr's and game systems. -running the power cords through the wall mount is not easy. I ended up taking the mount off of the wall to run the cords behind it instead of up through the hole in the bottom of it.

. Pete, West Berkshire

I bought this for our house as i had run wires from beside the fireplace to above the fireplace and i didn't have enough devices to merit a media cabinet. The 2 shelves easily fit my bluray on one shelf, and my kid's wii and wii remote charger and goodies on the other. The "instructions" are 4 pictures, which are easy enough to puzzle out. I had to hold the shelves while my wife put the rods though the different pieces and screwed it together. Seems sturdy enough and looks sharp. It's all metal and glass aside from some isolation pieces for the glass-to-metal transitions. . For the cost, it's fantastic.

S. Shawna, Derbyshire says

I purchased two of these units and found them to be just what i needed. I mounted these in the corner of the rooms under my tvs and pivoted them out towards the room. One tv is large and the shelf fits underneath it near perfectly. The other tv is smaller (32") and the shelf sits out farther than the tv. These shelves stick out much further than you might think. I pre-drilled the holes for the lag bolts and used a 10mm socket to get them into the studs (i would not mount these using the supplied anchors . Find the stud). Overall they look good, hold the cable boxes and pivot about as needed. You could swivel the shelf for a more unique installation also but i found that the pivot action was acceptable. Buy with confidence that this is a very capable shelf.

U. Jennifer, Delaware

I would give this product 5 stars but for one issue. Once mounted, there is substantial play in the mounting pin which causes the shelf to tilt. I am using 2 of these shelves to hold my yamaha receiver, 22 lbs on one and my xbox one on the other. I had to make a shim to place around the long bolt that holds the arm to the wall mount in order to compensate for some of the play. Even then, i would say the front edge of the shelf dips by 1/4 inch. The plastic shims i made have allowed this to work, but it could be so much better.

. Joanna, Croydon says

We are very happy with this mounting shelf our tv is above the fireplace and the show is to the left of the fireplace it fits our cable box and our dvd player and our wi-fi everything is all in one and its very nice everything fits on it and it doesn't look cluttered we would recommend this to anyone if you have any questions you can email us at rays techworld yahoo. Com have a blessed evening and happy

J. Margaret, Torbay

I built an extention to my wall to mount this for functionality and to hide massive amounts of wires. This looks slick and keeps my electronics off the floor out of the reach of my children. Wire channel works well, but ithink the holes for the wires to go through should be larger but either way still better than seeing all the wiring. I have my dvd/surround sound on a roll of tape cause the toslink connector will be flexed if placed directly onto the glass

H. Mary, Wigan says

Upon receipt of the product (which ships fast) my parts did not work, i contacted seller via email with what parts i thought were wrong. The seller emailed that same day and had the replacement parts shipped out. I received the parts and the shelving unit was still not going together correctly. Emailed the seller with all the measurements and they promptly responding advising they would like to just send me a new 3 shelve unit. They provided me with a prepaid fedex shipping label to send the old one back and i received my new unit yesterday. This one went together perfectly and looks really good; there's no better looking 3 shelve mounting unit at this price. . I did read allot of the reviews and wanted to let everyone know how my components worked out. Blueray fits nice on top with tons of room; second shelve my direct tv hd-dvr sits and hangs off about an inch with cords and all (honestly it looks fine); the third shelve i have my sony receiver which hangs off a little over and inch (due to all my wires). Even though they hang off the receiver and hd-dvr make it almost unreconizable since they are pretty much the same size. I couldn't find any other products that had bigger shelves which would be my only complaint - just on 1 inch in lenght. . Completely recommend this product and the customer service is outstanding. . Hope this helps with your decision.

M. Audrey, Nordrhein-Westfalen says

The shelf looks very nice and seems sturdy. We have a surround sound receiver on the bottom shelf, a playstation 4 on the middle shelf, and various networking devices on the shelf. The cable channel is a bit difficult to feed multiple cabels through. I found that i had to use a stiff guide to get cables from top to bottom. It goes together fairly easy, it helps to have an extra set of hands especially when mounting on the wall due to its weight. It has been in place for several months we have not had any issues with support

I. Sharon, East Riding of Yorkshire

I was a little nervous about this shelf because i saw reviews saying it wasn't big enough to fit some electronics. One reviewer noted that his direct tv box fit along with his dvd player and other items. I was worried about my dtv box because it was the biggest item. . Unfortuneatly my box does not fit. Depending on what receiver you have you may or may not have the same problem. If i swap my hr 24 living room box with the hr 21 box in the bedroom (where the shelf is located) it would fit great. The hr 24 is a few inches shorter. The hr 21 hdmi cable hits just below the shelve's circular opening for the cable so i may prop it up on something and see if sliding that cable end into the hole gives me the extra 1. 5 inches i need or i may just let it hang off the end. . It feels very sturdy and is good looking but i do wish they had made the shevles about 2 inches wider from the wall so that more things would fit. (my older dvd player for instance would have the same problem as the hr 21 box but i upgraded that shortly before getting the shelf. )

O. Meredith, Victoria says

Bought these to mount my polk audio monitor 40 book shelf speakers to make a little more room in my man cave. They are large enough to hold speakers standing on end or lying on their sides. They look so good that i intend to buy 2 more for my other 2 monitor 40's. Finally get to listen to 7. 1dd in this little 10 x 14 room. I recommend the 30 lb capacity mounts. You won't go wrong buying these. So go ahead an add them to your cart.

N. Anonymous, Lewisham

I don't know what all the comments about this item being difficult to assemble is all about, i say down with the directions, i went through the componets and made sure everything was there and marked up the directions with my own notes and it really went pretty good, all the parts where there, went together just fine, i was intimidated by some of the reviews as far as assembly. But no problems. The shelf, nice item, does just what i wanted it to do, and what it was designed to do, really happy with it, the only thing is i was told i should have consulted the little woman about this before i made the purchase because "you don't dust, and black shows dust terribly". So keep that in mind before you make the purchase.

C. Diana, Connecticut says

I really do, the price is just great, but the quality you get is even better. I have two, one in my bedroom and the other in the living room, and i use them for a dvd player in the bottom shelf, and a simple 2. 1 home theater heavy sub-woffer in the top shelf. Fit and finish are flawless, assembling very easy if you are handy, and running cables through it a snap (however, to avoid frustration i cut off the protruding edges of the ac plug so it goes easier, no big deal) (this can be avoided by running this wire first). Beautiful, expensive looking design, it beats down most other more expensive shelfs. Just make sure you drill right in the center of the stud and your life will be good.

A. Rose, Berlin

I bought this wall unit specifically to mount several sonos connect:amp wireless streaming music units. I also used the speaker wall plate with 16 binding posts to connect the wires to hardwired speakers throughout various areas in my house. I like this unit as it can hold either 3 sonos connect:amp units or if i want to stack them it will hold 6. Wiring goes through the back through a channel. I read other reviews on this unit where people had difficulty with the channel not being large enough but given that feedback i was careful to run the wiring so as to avoid this issue. Ran speaker wiring from the top down and 110v from each sonos connec: amp down through the channel to a plug below the wall unit. The unit was a bit difficult to assemble without someone else holding the unit during assembly but i like and recommend this triple shelf wall mount.

Q. Anderson, Utah says

Fantastic media mount. Looks sharp and is high quality construction. I assembled it with the help of the neighbor's 11 year old easily and he could have probably done it himself. The wall mount is ultra secure which was important because it is my first foray into wall-mounting electronics. The glass is thick and heavy, i don't worry about any breakage or stability. It takes the place of the bulky, hard to move and frankly ugly wooden entertainment center we used to have. Owned it almost 9 months and i still love it. A buy i'm actually happy to have spent the money on.

R. Imelda, Kansas

This product was very easy to setup and install. Also, it looks wonderful with a television mounted above it. We actually installed it just above the bottom line of our tv so it is quite seamless. The shelves are sturdy and i don't see any type of give on them at all. Don't freak out when you get the packing as the picture on online store shows black shelves and a plastic ridge. The package has two sides with one showing a silver ridge and black shelves and the other showing the same as the picture online. You will get the black version. The only gripe i have is that it won't fit a power cable for my ps3 behind the ridge, but i'll figure out a way to hide that somehow. For hdmi cables and other smaller plugs it should work well, otherwise you'll want to find another solution to hide cables. Overall, a very great modern design.

X. Meyer, Oklahoma says

I am using one of these in my computer room, to house all of my network gear. This is a great unit. . Pros:. - sturdy metal construction. - glass shelves are quality, and look nice and shiny. - the cable management system is awesome, no cables showing at all. - mounts to a single stud using a bracket, so its a piece of cake to wall mount. . Cons:. - heavy. - cable management track could be bigger. Getting large ferrite core clad cables through the track after mounting is pretty much impossible. You have to remove the unit, run the cabling, and then set it on the wall mount bracket. . Final word:. - well i own 2 of these now, so there ya go.

G. Susana, Gateshead

I purchased this to go beneath my wall mounted hdtv to hold my surround sound system. The unit itself is very nice. It does take more than one person to assemble. I did, however, have two problems. First, the cutout in the back for cord retention is a little small, i ended up having some bigger cords that wouldn't fit. Also, the drywall screws were a huge pain! they just pretty much crushed / crumbled as i tried to put them into the drywall. Ended up putting four holes in the wall that ended up being way too big. I had to get a wall patch and repair it before continuing. I ended up putting the concrete screw parts into my drywall because they held up much better than the drywall ones. Other than those, i feel this is a decent unit. It definitely holds some weight (i have a heavy surround sound system).

. Newell, Buckinghamshire says

Got two of these when we refinished our basement. They look great and we're beyond simple to install. One is holding my xbox one, and the other holds my a/v reciever (this is an old sony unit that i can't bring myself to upgrade, which means it's not exactly a light reciever. It's about twice the size of my xbox one) i was expecting the reciever to give this mount some issues based on the size and weight, but it is perfect. 100% solid, and it swivels so i was able to put one in each corner of the room, up high. All the wires go through the wall and plug in behind it. A wire free install was very important to me, and thsee mounts were just what i was looking for. I tried getting some picd, but the area my tv is in, is very low light (purposely) so the pictures didn't do it justice, and flash made the unit look awful.

Y. Nellie, Quebec

This is a very sturdy heavy duty glass shelf for a/v equipment. It is extremely heavy and i found impractical to use for just a couple gaming systems. In fact it is so heavy i am not sure my wall would have handled the weight. I decided to give to a friend that needed something of this strength. . Overall the quality is good but i personally was looking for something simpler.



Top mountit floating wall mounted Review

Disadvantage and Critical reviews

F. Pearson, Oklahoma says

Pay the extra money and go with a better one. Easy to install holds the weight of my electronics but if you have a ps4 pro it sticks off the glass looks terrible. No much room for the wires to hide. No channels to keep the wires separate. I would return it but i am too lazy to take it off the wall after the hell i went through with the wires.

H. Anderson, Vermont

It's a decent wall mount but with the default way you assemble it sticks soo far out from the wall it looks ridiculous. Even my onkyo a/v receiver with everything hooked up wouldn't require that much depth. I dunno what kind of components they planned people would use this thing for lol. . I did as another reviewer did and mount the bracket off to one of the sides and then where the arm attaches to the plate only put in the middle bolt. That allows you to swing the plate so the back side of it is flush on the wall. Much much better. Only downfall is if you are using heavy items on it you may need to tap some new screw holes on the bottom of the plate for a more secure hold. . The mount itself seems really well built and heavy duty. Just the design is lacking. I don't think it would have been very hard for them to add a couple extra screw holes in the bottom of the plate to accommodate an off center install like many have done.

L. McCarthy, Maryland says

I bought this a few years ago and decided to buy it again. It's like night and day. The manufacturer has redesigned it and it's for the worse. The back that mounts to the wall is significantly smaller, the glass shelves are thinner and the spacing between the shelves have been made shorter. The weight it handles is therefore less.

A. Sarah, Islington

This is a decent looking mount for what it does and will be holding up, 20 lbs is a lot of weight. Other than that, it looks nice on our wall and was very easy to assemble. The top of it where the cords from the wall mounted tv above it will drop into isn't visually appealing so we set it up to where the bottom of our flat screen above it just barely covers the connection. . This would be nicer if the top cover/cap had a sleeker design, but for the price, it's not a bad deal.

. Carol, Nottingham says

I received a 2nd unit only to find the same problem. The wall mount bracket should be approximately 3"x8" and instead is 2"x3" and doesn't seem substantial enough to support the 18. 5lb shelf weight plus the additional weight of components. Either send the bracket shown or correct your diagrams. Very frustrating and not good when it comes to quality control.

D. Taylor, Kirklees

So many issues with this i'm not sure where to start. The most important item is that it came to me missing the correct wall plate. Yes, it came with a wall plate but it is not the one pictured in the "directions". Its much smaller and i would not trust it to up hold my entertainment system(s). Speaking of "directions" these are perhaps some of the worst i've ever seen. They aren't really even directions rather more of a diagram listed with the part numbers point out what goes where. They took something that should be anywhere from 15 to 20 steps and combined it into three. This is unacceptable. While i understand the assembly may seem simple to any idiot but when you have multiple parts that look the same and aren't labeled with a number it can be confusing. The construction of this shelf feels cheap along with the parts it comes with. Out of pure frustration i've opted to just build my own wall shelf. I won't be purchasing anymore items from mount-it! . I have a tv wall mount from them as well that is pretty much the same story.

C. Cassella, Blackpool says

Not very deep; i purchased this with the intention of hiding all my cabling. I didn't realize how little space there was for cords, and that a regular-sized yamaha home theater amp basically doesn't fit on it (it sagged and there wasn't enough room to plug speakers into it. Since i drilled holes into the wood paneling, i'm keeping it in place, but i'm really not happy with it and will probably replace it before the year is out.

X. Widmer, Virginia

This product is slightly smaller than what i anticipated. It is extremely sturdy and if you have smaller cable boxes and components this will work well. I would recommend this to others. It also does a pretty good job in hiding the wires but this must be done with patience.

Z. Smith, Manitoba says

Its made well and certainly supports a cable box. It sticks further out from the wall than we anticipated. The measurements say its 16 inches deep, it neglects to tell you that there is another 6 inches added from the "small arm" connecting the mounting bracket and the shelf. We decided to keep it as in the end its smaller than the what we had before but i'm not sure if we would have purchased this had we known about the additional length.

B. Patricia, Aquitaine

Looks awesome , when installed, very hard to asemble, and hard to mount on wall. Cable managment, hole in the back is too small, and hardware, is not engineerd right. If u buy brace urself, for a hard time mounting it , ur reward will be all the way to the end, u r goin to need help. Doin this at least two people, this thing is heavy. This install stress me. Im glad ill never install another one.

R. Anonymous, York says

I thought this would be great but problems started during the installation. Drywall anchor screws were easily stripped using a screwdriver, no drill was ever used. Replaced those with better drywall anchors. After three cables there wasn't enough room for the other two cables. Needed room for 2 hdmi cables, 2 power and a coax. There is room in the channel but the opening at the top is 3 4 x 1 1 4 inches. . Thought i would feed cables and then push the shelves on to the bracket. Fail. It dropped shattering the lower shelf. Moral of the story is install with 2 people if you buy this. Also, a wisk broom is a good way to pick up glass on carpet before vacuuming. . I give this 2 stars for looking pretty. Flecked black paint and high gloss shelves. Oh, and the way the glass shatters like safety glass. Now i have to figure something else out for shelves.

T. Shawna, Colorado

Arrived in pieces. not very well packaged or made.

I. Mathis, Northumberland says

The quality of these shelves are pretty s*ty. Assembly is pretty pathetic, glass shattered during assembly by hardly making contact with the next shelf while putting the floppy bulls* together. Luckily they are replacing it immediately or i'd get a refund and never by the pos again.

V. Mary, City of Kingston upon Hull

Was a little bit of a pain to assemble but it is pretty sturdy. Its very little space to get the cords through so i had to run the cords as i was putting it up. Huge pain. I dread the day i have to replace a media device and have to take the thing down. Looks good so im happy for now.

W. Rose, Texas says

Was still too small to safely hold a standard receiver. I think all of these wall shelves are not meant for normal audio components and instead smaller things like cable boxes

O. Noguera, North Dakota

I bought this probably 2 years ago now. Upon receiving it, i found that the shelves were not deep enough to set my dish receiver (at that time) on and the channel down the middle took up space where the connections on the back needed to be. So i set it aside for about a year. After getting a slightly smaller dish box, i'm now able to set it on the shelf without it hanging over the edges. The shelf looks really good mounted on the wall but if the shelves aren't deep enough, that really doesn't make any difference.

M. Miller, North Dakota says

I purchase this exact unit back in 2012. Today while i was in another room i heard this loud bang and what sounded like a truck load of marbles hitting the floor! what the blank? one of the shelf's gave out for no reason! what a mess, glass everywhere. I found glass 12 feet from where it happened. I am thankful no one was setting near or my grandson playing near these shelf's. True i purchased this 4 years ago and i was happy with the unit, but i cannot give this product a positive review knowing the possibility this could happen to someone else. These glass shelf's are only supported were they attach to the wall mount. Just beware. Update. I wanted to add some pic s to give you a better idea of what happened. The set-top box is an xfinity rng-150n which measures 8 x 10 and weighs 3 pounds. So weigh was not an issue. The picture doesn t show the very fine sharp glass slivers which left scratches on both the dvd player and the wood floor. I can t imagine what this would have done to a person.

Q. Alexia, Kentucky

Assembly is not as easy as i thought. The trick when doing this project solo is to lay it down on the floor then screw the bolt to hold everything in place. Once assmbled lifting the whole assmbly is easy. The organizer can be pulled outward from the bottom to help organize the cables at the back, otherwise it looks beautiful for the price its a bargain

G. Nielsen, Rhode Island says

Put one in each room of apartment. Very easy to assemble, and hang. Area for feeding wires thru from shelf to shelf is way too small! you can not put a stereo on these shelves simply because the surface area is too small. All of your components must be smaller than a vcr. Fortunately nowadays cable and satellite providers boxes are very small. The unit is sturdy enough to handle heavy items. They just have to be tiny.

J. Beale, Bexley

I may have read a little too much into the "corner" reference in the writeup. I wasn't able to use it properly in my corner-mount install, ended up with a bit of a kludge.

S. Cunningham, Languedoc-Roussillon says

Does not fit a a/v receiver or a cable box from media com. It would fit if it didn't have to plug anything in the back.

. Morgan, City of London

Looks good. The rail to hide the cables isn't big enough to hide many cables (power, hdmi, etc). Needs more room within that rail to accommodate multiple devices and the cables that those use.

U. Wimbish, Calderdale says

This item looks really nice, but the design leaves a lot to be desired. First of all, it's very difficult to put the unit together because the shelves are heavy and the steel rods holding the unit together don't fit securely into their ports. So they move around and the parts fall out of place. Then there's hanging the unit on the wall! the two screws for holding the unit onto the wall mount are very small and they have to be perfectly and exactly lined up with the unit to screw them in. Because the unit is heavy, it's hard to hold for a long time so it's hard to line up the screw holds. It took a long time to do all this and i haven't even connected the equipment yet.

N. Barbara, Newham

I can't give this item a bad review but i will advise any customer to measure the component you are placing on the unit against the dimensions stated in the item details. The platform was so small that i couldn't use it. Also it appears that they use the same pic for various size shelves so you can't go by the picture.

. Hannah, Suffolk says

Wall mounting plate looked different than in the instruction pictures. Its small! thought i was missing it at first. Also the shelves aren't t very deep, my dvd player is a bit to long, hang s over an inch, xbox one fits perfect. Its server s its purpose , nothing to brag about.

K. Theola, British Columbia

Remarkably heavy, and very little clearance for cables in the cable channel. Also has one ambiguity in install instructions that requires reasoning one's way through. Looks nice enough, feels secure, etc.

Y. Veronica, Tennessee says

I wish there was more space both between the shelves (you cant really mount a receiver on the bottom shelves) and with the cable management nook behind. Really, if youre running a 7 channel system with anything but very small gauge wire, youre going to run out of space (not including hdmi cables from other devices, power cables, network cables, etc). Lastly, the shelves are about 1-2" too short. The legs from my receiver hang over by about 1/2". Its not a saftey concern or anything, but be sure to measure your receiver and leave some space for the wires coming out of the back of the unit and going down the "cable management" space. . It looks sleek though, once constructed, its sturdy.



Leave a Reply

You must be logged in to post a comment.


Back to Top

Related Products

  • More Info
    Dji Mavic Battery Intelligent Flight Battery - 3,830mah/11.4v, Gray (cp pt 000587)

    Dji Mavic Battery Intelligent Flight Battery – 3,830mah/11.4v, Gray (cp pt 000587) 2835

    See Reviews Dji Mavic Battery Intelligent Flight Battery - 3,830mah/11.4v, Gray (cp pt 000587), Mavic battery intelligent flight battery - 3,830mah/11.4v, intelligent flight battery (3, 830mah/11. 4v) specially designed for the mavic. built-in sensors and bright leds tell you the status and remaining power of your battery in real time. -dji mavic battery intelligent flight battery - 3,830mah/11.4v, grayAffordable Dji Mavic Battery Intelligent Flight Battery - 3,830mah/11.4v, Gray (Camera Other Accessories) Cp Pt 000587
  • Purchase Now
    Fintie All New Generation Release (ekaj117us)

    Fintie All New Generation Release (ekaj117us) 788

    Free Shipping Fintie All New Generation Release (ekaj117us), Case all-new fire hd 10 tablet 7th generation, 2017 release - multi-angle viewing folio stand cover pocket auto wake / sleep fire hd 10.1 inch tablet, autumn fintie, a quality product in your reach. this case is designed for the all-new online store fire hd 10 tablet (10. 1" display, 7th generation - 2017 release). also compatible fire -fintie case all-new fire hd 10 tablet 7th generation, 2017 release - multi-angle viewing folio stand cover pocket auto wake / sleep fire hd 10.1 inch tablet, autumn love
    • Addition: This Case Allows You To Adjust The Fire Hd 10 To Multiple Angles Securely. Document Card Pocket Is Designed For You To Store Your Business Cards, Bank Cards, Notes Or Bills While On The Go.
    • Addition: Built From Durable Pu (synthetic) Leather Exterior And Soft Microfiber Interior - Snug Fit, Lightweight And Protective.
    • This case is a lot better than the one i had before. Only thing that bothered me was that i couldn't get the kindle to sit level in the case. Wasn't bad enough to send back. I don't notice it now. I usually sit in low light. The kindle sits good in landscape position. Love the pocket. https://puqus.com/fintie-all-new-generation-release-78876h3jp11/#fintie-all-new-generation-release
    Affordable Fintie All New Generation Release (Carrying Case Or Bag)
  • Today's Deal
    Klipsch R-25c Center Channel Speaker (r 25c)

    Klipsch R-25c Center Channel Speaker (r 25c) 2952

    Purchase Now Klipsch R-25c Center Channel Speaker (r 25c), Center channel the center channel is the unsung hero of a home theater system, delivering over 60% of a movie's soundtrack and almost all of its dialogue. the reference does just that. it's all about -klipsch r-25c center channel speakerDiscount Klipsch R-25c Center Channel Speaker (Speakers) R 25c
  • Very Cheap
    Sony Xbr75x900e 75-inch 4k Ultra Hd Smart Led Tv 2017 Model (Television)

    Sony Xbr75x900e 75-inch 4k Ultra Hd Smart Led Tv 2017 Model (Television) 954

    Purchase Now Sony Xbr75x900e 75-inch 4k Ultra Hd Smart Led Tv 2017 Model (Television), 4k ultra hd smart led tv 2017 4k hdr processor x1 powered by the 4k hdr processor zx1, the sony x900e pairs the brilliance of 4k clarity the brightness, color, and detail of high dynamic range. combined 4k ultra -sony xbr75x900e 75-inch 4k ultra hd smart led tv 2017 model
    • Great tv! great for hdr gaming on both the ps4 pro and the one x, works really well with the online store echo. There's a lot of videos and reviews stating that they have problems with the tv either bricking or slowing down. I haven't had any of those problems and would highly recommend this tv, esp... go to https://puqus.com/sony-xbr75x900e-75-inch-ultra-smart-9541n7xlyrf/#sony-xbr75x900e-75-inch-ultra-smart
    • Bonus: Smart Functionality Gives You Access To Your Favorite Apps And Content Using Sony's Android Tv.
    • Bonus: Pairs 4k Ultra Hd Picture Clarity With The Contrast, Color, And Detail Of High Dynamic Range (hdr) For The Most Lifelike Picture.
    Cut-Price Sony Xbr75x900e 75-inch 4k Ultra Hd Smart Led Tv 2017 Model (Television) Xbr75x900e

Product Image Gallery

Top-mount-mi-803-component-playstation4-projector-2305039hhk22-Content