Mounting Dream Md2296 Bracket Articulating (Av Furniture) 921

Review for tv wall mount bracket inch led

Price was $54.99. It s an amazing mount! they make it so easy to set up. It has a adhesive template to put on the wall to tell you where to put the holes as well as a level for that template! there are different parts in case your tv doesn t fit the mount. I chose this one over another company because their mount was 16 inches wide on the wall so it would fit two studs. I can t say enough good things. About a tv mount. I have a 55 inch sharp tv, the full motion this mount offers is great as well. No problems. If you re debating which mount, this one for sure.

-V. Michele

Tv wall mount bracket 42-70 inch led, lcd oled flat screen tv, full motion swivel articulating arms, up to vesa 600 x 400mm 100 upgraded version wall mount fits 42-70″ tvs this mount passed test of 4 times claimed loading weight capacity. this mount fits most of 42-70″ tvs sold today. it fits tvs mounting -mounting dream md2296 tv wall mount bracket 42-70 inch led, lcd oled flat screen tv, full motion swivel articulating arms, up to vesa 600 x 400mm 100 lbs

  • Characteristic: Viewing Becomes More Comfortable: Tilts Tv Up 5 And Down 15 To Reduce Glare, Swivels Tv Left Or Right According To Your Seats Position. Pull Out To 15. 6 Inch And Retract Back To 2. 8 Inch, Making Your Tv Alive To Move.
  • Characteristic: Easy Installation With Decent Instruction And All Included Hardware In Pre-labeled Bags. +/-5 Post-installation Adjustment Allows Perfect Tv Leveling. Comes With 6 Ft Hdmi And Torpedo Level. Easy Tilting Adjustment With Tool-free Spring Loaded Handle.

OnSale Mounting Dream Md2296 Bracket Articulating (Av Furniture) Md2296

Buy Now


Foreword

Easy to install. Studs are typically 16 inch on center. The main bracket allows you to screw into two giving amazing stability. My only regret is that i didn't invest in this puppy 10 years ago. . Hung a lg. Bolt pattern matched perfectly. . Didn't need wd40 or any special instructions to adjust. Strongly advise against simply mounting to drywall. Studs are a must. . Took a few min to figure out how to get close to the wall. Spread the main brackets first (left nc right), then push the mounted tv to snug to the wall. . I did need a 15 foot hdmi cable. 10 feet was too short. The Best tv wall mount bracket inch led ( Dec 2019 ) | Mounting Dream-Av Furniture Review Characteristic Mounting Dream MD2296 TV Wall Mount Bracket for most 42-70 Inch LED, LCD and OLED Flat Screen TV, with Full Motion Swivel Articulating Arms, up to VESA 600 x 400mm and 100 LBS Heavy duty unit fits for most of 42-70" tvs up to 100 lbs, with max vesa of 600 x 400mm/mounting holes spacing. our mounts are tested with 4 times loading listed. images on left side will help you see if this mount perfectly fits your tv in the aspects: vesa, studs spacing and possible blocked input. not perfect? you can check other mounting dream mounts for best options.. Viewing becomes more comfortable: tilts tv up 5 and down 15 to reduce glare, swivels tv left or right according to your seats position. pull out to 15. 6 inch and retract back to 2. 8 inch, making your tv alive to move.. Easy installation with decent instruction and all included hardware in pre-labeled bags. +/-5 post-installation adjustment allows perfect tv leveling. comes with 6 ft hdmi and torpedo level. easy tilting adjustment with tool-free spring loaded handle.. Technology of robot welding makes whole unit sturdy and safe.. Us based customer support answers your pre-purchase and installation questions. our mount is 10-year warranted! .

Mounting Dream Md2296 Tv Wall Mount Bracket For Most 42-70 Inch Led, Lcd And Oled Flat Screen Tv, With Full Motion Swivel Articulating Arms, Up To Vesa 600 X 400mm And 100 Lbs Review (md2296)

This truly is a mounting dream. I had bought a mount from another website and it was such a failed mount that i was searching for a replacement with haste. . Best buy has some sanus full range whatever but it was $300 and i just didnt feel like spending that money if i didnt have to. . Then this mount came and changed my life. Everything in here is packaged with such care. All the screws are approriately labeled. Theres like the cutest 6" level with a magnet strip on the bottom for convenience. Every part was labeled. . I didnt think this mount could get any better but then i saw it. . It was a beautiful template with tape on the back to allow easy holes to be made. Theres a small water piece from the level you can stick in the middle to ensure that even the template is level. . I almost cried with joy. . Buy this mount and use it. It is life changing. -Z. Laura

Mounting Dream Md2296 Bracket Articulating

  1. Class: Electronics
  2. Brand: Mounting Dream
  3. Color: 16" Wood Stud
  4. EAN: 6920138100189
  5. Product Dimensions:
    Height:17.01 inches
    Length:25.59 inches
    Weight:19.00 pounds
    Width:16.54 inches
  6. Manufacturer: Mounting Dream
  7. Model: MD2296
  8. MPN: MD2296
  9. Total Items: 1
  10. Quantity: 1
  11. Part/Serial Number: MD2296
  12. Type: Home Theater
  13. Category: AV FURNITURE
  14. Size: 16" Wood Stud

tv wall mount bracket 42-70 inch led, lcd oled flat screen tv, full motion swivel articulating arms, up to vesa 600 x 400mm 100 Home Theater, Upgraded version wall mount fits 42-70" tvs this mount passed test of 4 times claimed loading weight capacity. this mount fits most of 42-70" tvs sold today. it fits tvs with mounting holes as close as 4"x4" or as wide as 24"x16" (in tv terms - vesa 100x100mm to 600x400mm). specifically, it fits for vesa 100x100, 200x100, 200x150, 200x200, 300x200, 300x300, 400x200, 400x300, 400x400, 500x300, 600x200, 600x400mm. retracts 2. 4" low profile, extends 14. 6" from the wall. with dual articulating arm design, this mount retracts to 2. 4"(to wall) to save space, and extends up to 14. 6" from the wall. tilt, swivel and rotate function +5 /-15 tilt, +/-3 rotate and swivel side to side for comfortable viewing flexibility, provide smooth adjustment for all directions, make it easy to view your tv from multi-angles. easy tilting angle adjustment handle this mount is equipped with tool free spring-loaded handle for easy tilting angle adjustment. heavy duty steel construction and automatic robot welding technology this mount is constructed with heavy duty steel materials and with durable powder coated finish, and 100% welded by automatic robot, this advanced welding technology makes the mount sturdy and ensures mounted tv stable and secure, supports tv weight up to 100 lbs. torpedo level and 6' high speed hdmi cable it comes with torpedo level and 6' hdmi cable. hdmi cable supports 3d, ethernet, 1440p and audio return conforming to latest hdmi 1. 4 standard. includes all necessary mounting hardware this mount ships with hardware for both wall and tv mounting. anchor included is only for concrete wall installation not for dry wall installation! Mounting Dream Md2296 Bracket Articulating (MD2296-Mounting Dream).

Mounting Dream Md2296 Bracket Articulating Home Theater

PROS
  • This is a great tv mount. It was easy to install with the included template and stick on level. I thought the level was a gimmick, but i checked it with my own level and it was very accurate. The tv is very secure and i have no concerns about it falling off the wall (which i was worried about prior to installation). They included many different bolts to mount the tv and overall it installed much faster than i anticipated. I'm not very handy and expected trouble at some point in the process but it was simple. I should add that i mounted this on a sheet of 3/4" plywood that's part of a built in cabinet/entertainment center. I did have to buy different bolts and nuts but i have a non-traditional mounting scenario. I would recommend this to friends and family and i will be buying additional mounting dream hardware for my other tvs.
  • The template it came with was a life saver! i mounted my 60in 4k uhd samsung smart tv to the wall with minimal issues. I had to adjust the mount that attached to the tv slightly off center so i could still access the optical outlet and i needed to hit up the hardware store for a 3 drillbit screw head for the lag bolts. My drill was stripping them with the default drill head while trying to screw them into the wall studs. . My only gripe, is that when moving the tv while attached, it rocks off level slightly, even after securing it with the two nuts as tightly as i could. Not a big deal though.
CONS
  • We have it up and we pulled it out and now we csnt get it bsck to the wall? it seems like a good product, nothing is bent just once ut was pulled out it wont fold back in.
  • This mount does the job but engineering on the vertical azimuth adjustment lever is in the wrong place or to short. It will not let to tighten the screw down tight enough, so i had to saw off part of the lever and tighten with a pliers.
  • I love the sturdiness and the material of this item but when i attach this to my tv, the screw does not hold the tv well. It moves! i followed all the installation instructions too. What's the point if it is not sturdy? 65' vizio.

tv wall mount bracket inch led Mounting Dream MD2296 TV Wall Mount Bracket for most 42-70 Inch LED, LCD and OLED Flat Screen TV, with Full Motion Swivel Articulating Arms, up to VESA 600 x 400mm and 100 LBS (Switch to Mobile/Desktop Version)

Great mount, everything included. Very good construction, fits my 55" tcl roku tv perfectly without any of the extra attachments. This mount make me love my tv more which i didn't think was possible. I've mounted every relatives tv on the wall. This was the easiest no trips to the store it was like have the mount custom fitted. The manufacturer obviously listens to the reviews. One review i read said they should add a paper drilling template. When i opened the package what do i find, a drilling template. Definitely ordering two more for the other tv's in my house.

Mounting Dream Md2296 Tv Wall Mount Bracket 42-70 Inch Led, Lcd Oled Flat Screen Tv, Full Motion Swivel Articulating Arms, Up To Vesa 600 X 400mm 100 Lbs
Click to see NoticeMounting Dream Md2296 Bracket Articulating (Av Furniture)"This has been the best first mount i have ever bought. Built sturdy. Works fine with my older 46" sony lcd which has to be pushing 50+lbs. If anyone needs to hang their tv, definitely use this mount. Took about an hour to do as it was my first time, but the instructions are pretty much spot on. Just make sure you use the correct length screws (which were provided) and installation is seemless. I could definaly hand a separate tv in half the time. Would definitely recommend to anyone. May buy 2 more for future projects."

(0) Question: Better yet, is there a manual online somewhere for this item?


(1) Question: Once the tv is mounted and pulled out away from the wall, can it then to turned left/right? or is it one or the other?


(2) Question: Will this work with 2017 lg 6ouj77? i was told to stick to an lg bracket as others would not fit properly?



Computer & Monitor Mounts » Projector Mounts » Speaker Mounts » Mounting Dream Md2296 Bracket Articulating (Av Furniture) Md2296


TV Wall Mount Bracket Full Motion Dual Articulating Arm 37-70 Inch LED, LCD, OLED, Flat Screen,Plasma TVs up to 132lbs VESA 600x400mm Tilt, Swivel Rotation HDMI Cable PERLESMITH

This was the first mount i ve bought from them so i was nervous to get it and put it up. . I usually buy from monoprice. Com. I mounted my 55inch tcl roku tv and it worked great! i would definitely buy again to mount another tv!

Description: the full motion mount fits 37" to 70" flat panel tvs with vesa mounting hole patterns within 200-600mm wide and 100-400mm high. This tv mount is constructed with heavy duty solid steel with powder-coated black finish providing security and stability. Adjustable tilt, swivel, rotation and extension place your tv in perfect viewing angles. The lock and release design secures the tv into place for additional security and offers convenient installation, articulating arm design allows display to be folded parallel to wall to save space. Please check whether the mount is suitable for your tv: first, please check your wall for wood studs, it can't be used on concrete wall or drywall alone. Next, the weight of your tv should be less than 120lbs. Then, mounting holes distance on the back of tv must be less than 24" (600mm) horizontally and 16" (400mm) vertically. Your tv should be at least 37 inch. Otherwise, you will see the bracket. Finally, please check possible blocked cable/input. Specifications: fits 37" to 70" flat panel tvs supports tv weight up to 132lbs fits vesa mounting hole patterns: 600x400mm/ 400x400mm/ 400x300mm/ 300x300mm/ 300x200mm/ 200x200mm/ 200x100mm tilt adjusts 15 degrees forward or 5 degrees backward swivel up to 180 degrees extends up to 16" and folds 2. 8" from the wall to save space wall mounting studs distance up to 16" rotate 6 degrees for perfect tv level adjustment package includes: 1x tv wall mount 1x standard mounting hardware 1x user manual 1x 6ft high speed hdmi cable 1x 3-axis magnetic bubble level 5x cable ties

TV Wall Mount Bracket Full Motion Dual Articulating Arm 37-70 Inch LED, LCD, OLED, Flat Screen,Plasma TVs up to 132lbs VESA 600x400mm Tilt, Swivel Rotation HDMI Cable PERLESMITHBracket-Articulating-600x400mm-Rotation-PERLESMITH

Bracket Articulating 600x400mm Rotation Perlesmith (pslfk1) FAQ.

Best mount! bought one to try out and liked it so much i bought 2 more for my house and 2 as christmas gifts for family. I will not purchase a different mount ever again. Easily holds my two 70" tvs and my dads 75". -Notice from X. Carol, Alsace

Click to Show bracket articulating 600x400mm rotation perlesmith (pslfk1) Details

Nothing to complain about. I'm just wondering if this support would work with the new 75" or bigger tvs since it's strong and the new tvs are lighter.

Bracket-articulating-600x400mm-rotation-perlesmith-(pslfk1) set picture

- V. CageenExtremely well-built. Mounting kit includes everything you need for wood stud mounting (but i bought toggle bolts for a metal stud installation and it worked fine). Great adjustability for tilt and fine adjustment for leveling. Excellent value.

Boxed up nicely, instructions easy to follow, seems to be pretty sturdy and doing a good job holding the tv up. Note: when mounting the bracket to the wall, make sure the arrow is up.

Y. Gina, Calderdale

TV WALL MOUNT BRACKET FULL MOTION DUAL ARTICULATING ARM 37-70 INCH LED, LCD, OLED, FLAT SCREEN,PLASMA TVS UP TO 132LBS VESA 600X400MM TILT, SWIVEL ROTATION HDMI CABLE PERLESMITH Pros
Brand :    perlesmith
Color :    Black
Model :    PSLFK1
Quantity :    1
Order click here :    normally ships in 24 hours
  • Save space: dual articulating arms that retract 2. 8" from the wall in home position to save space and also extend to a maximum 16" from the wall. therefore saving you some valuable space and adding a nice, neat appearance to your household.
  • Universal design: full-motion wall mount for 37" - 70" flat-panel tvs up to 132lbs, vesa(mounting hole pattern) - compatible faceplate fits vesa 200x100mm (8"x4") 200x200mm(8"x8") 300x200mm (12"x8") 300x300mm (12"x12") 400x300mm (16"x12") 400x400mm (16"x16") 600x400mm (24"x16"), wall mounting studs distance up to 16" only.
  • Safe to use: rest assured that your tv is in safe hands. this heavy-gauge tv mount has high standards, holding 37" - 70" tvs weighing up to 132lbs, which are tested to hold 4 times the weight they're rated to based on ul standard.
  • Adjustable optimal viewing: +5 /-15 tilt, +/-90 swivel (maximum swivel angle depends on tv size) and +/-3 rotation for maximum viewing flexibility. choose the perfect angle to view the screen from anywhere in the room. post-installation level adjustment allows the tv to level perfectly.
  • Product includes: standard mounting hardware, 6 ft hdmi cable, 3-axis magnetic bubble level, 5 pieces pack of cable ties, and our incredible 5-year warranty and friendly customer service. we provide what you need to make installation as easy and convenient as possible!
Price :    $32.79 (was $129.99)
Ce :    Best Consumer Electronics (perlesmith product review) for TV Wall Mount Bracket Full Motion Dual Articulating Arm 37-70 Inch LED, LCD, OLED, Flat Screen,Plasma TVs up to 132lbs VESA 600x400mm Tilt, Swivel Rotation HDMI Cable PERLESMITH available ( Dec 2019 )

Mounting Dream MD5420 Sound Bar Bracket Universal Sound Bar TV Mount Mounting Above Under TV Fits Most of Sound Bars up to 22 LBS, Detachable Long Short Extension Plates

The tv mount i purchased from mounting dream was absolutely fantastic, so i bought this sound bar mount next. Even with the longer arms, it didn't fit my tcl 55" tv and vizio 36" sound bar. After jerry-rigging the two side arms together to get extra length, it sort of worked, but it looked pretty bad. So i started completely from scratch and ended up reversing the main arm and the longer side arm, and it just barely fit. I had to pull spare parts including longer screws and spacers from the original mount kit that i saved, but at the end it looks great and i'm happy. That said, it shouldn't have been this hard, and they need to include a 3rd set of "extra long" arms. Took about 2 hours to finally get right.

22 lbs loading capacity the bracket adopts high quality 2. 0mm steel, fits sound bar up to 22 lbs/10kg. Withstood 2 time loading test (44 lbs) for secure and stable use. Flexibility with long and short extension plates two sets extension plates are adjustable and more flexible for most of tvs with standard tv mounting holes patterns sits above or under tv secure sound bar parallel above or under tv, provide clean look with wires running behind tv back. Save space without need of shelf, and avoid leaving screw holes in wall. Compatible with mount for better auditory auditory will be enhanced if apply sound bar with wall mounts (fixed, tilt, full-motion mount). Full-motion mount works especially well with sound bar bracket, for sound bar installed with sound bar bracket follows mounted tv to move toward same direction for best auditory and view. These mounting dream full motion mounts are compatible with sound bar brackets: http:// http://www. Online store. Com/dp/b00kxz79vk hardware for tv and sound bar installation easy installation with all necessary hardware included for tv and sound bar.

Mounting Dream MD5420 Sound Bar Bracket Universal Sound Bar TV Mount Mounting Above Under TV Fits Most of Sound Bars up to 22 LBS, Detachable Long Short Extension PlatesMounting-Dream-Universal-Detachable-Extension

Mounting Dream Universal Detachable Extension (fba md5420) FAQ.

These are good for the price. When adjusting they did slip loose a couple times and it was difficult to out then up in till cause of the mount, hey hold well once in place. They are comparable to what you would pay $30 for at target. -Notice from V. Russell, Sefton

Click to Show mounting dream universal detachable extension (fba md5420) Details

I did not think this product would work as my tv is recesses in the back. Bracket came with spacers that filled that recessed gap. I could not ask for more. Very fair price.

Mounting-dream-universal-detachable-extension-(fba-md5420) set picture

- G. AmandaThis is exactly what i needed to mount my sound bar above my tv screen. I didn't have room to mount it below and was thinking about mounting it on the stone wall above the screen. I ordered this and it did the job. The only difficulty i experienced was that the sound bar had flimsy female sockets for the machine screws supplied with the mount. The socket threads were stripped when i tried to tighten them and i had to re-fill, re-drill and re-tap the sockets to complete the job. This wasn't the fault of the mount vendor. The blame has to be shared between me and the sound bar manufacturer. Among all the idiotic and useless warnings and pre-cautions that come with stuff these days, this one would have been useful for both the sound bar and the mount vendors to include. The assortment of hardware and mounting brackets should solve any sound bar mounting challenge.

These mounting brackets are awesome! well worth the purchase. So easy too put together and all items that came with it really helps. Very well made and designed!

H. Nielsen, Brent

MOUNTING DREAM MD5420 SOUND BAR BRACKET UNIVERSAL SOUND BAR TV MOUNT MOUNTING ABOVE UNDER TV FITS MOST OF SOUND BARS UP TO 22 LBS, DETACHABLE LONG SHORT EXTENSION PLATES Features
Brand :    mounting dream
  • Easy installation with decent instruction and all included hardware in pre-labeled bags. us based customer support answers your pre-purchase and installation questions. our bracket is 10-year warranted!
  • Two sets extension plates are adjustable for most of tv with standard tv mounting holes patterns, allows 180 degrees swivel for more mounting flexibility than fixed (regular) brackets sold on the market.
  • Heavy duty and universal sound bar mounting bracket holds sound bar up to 22lbs/10kg.
  • Tool free knob easily secures the sound bar above or below tv, teeth on the arms connection lock the sound bar firmly in place, provide clean look and save space, avoid leaving screw holes in wall.
  • Compatible with wall mounts (fixed, tilt, full-motion mount). tv mounting holes compliant: 200x100, 200x200, 300x300, 400x200, 400x400, 600x400mm.
Price :    $13.99
Model :    FBA_MD5420
Quantity :    1
Order click here :    normally ships in 24 hours
Ce :    Best Computer Component (mounting dream product review) for Mounting Dream MD5420 Sound Bar Bracket Universal Sound Bar TV Mount Mounting Above Under TV Fits Most of Sound Bars up to 22 LBS, Detachable Long Short Extension Plates available ( Dec 2019 )

Mounting Dream MD2413-MX TV Wall Mount Bracket of 26-55 Inch LED, LCD, OLED Flat Screen TV Full Motion Swivel Articulating Arm, up to VESA 400x400mm 60 LBS Tilting

Easy to mount, everything you need included. Goes from 100x100 to 400x400. I mounted 46" 400x400 vesa tv. The extras like a level are a nice touch and useful afterwards. Instructions were straight forward, and it was easy to assemble. Plenty of screws and offsets for different tv shapes. Once up it was easy to adjust to a good viewing angle. I'd get another one for my next wall mount.

Fits most of 26-55" tvs this mount fits most of 26-55" tvs sold today. It fits tvs with mounting holes as close as 4"x4" or as wide as 16"x16" (in tv terms - vesa 100x100mm to 400x400mm). Specifically, it fits vesa 100x100mm, 200x100mm, 200x200mm, 300x300mm, 400x200mm, 400x400mm. Retracts 2. 9" low profile, extends 19" from the wall. With articulating arm, this mount retracts to 2. 9"(to wall) to save space, and extends up to 19" from the wall. Tilt, swivel and rotate function +5 /-15 tilt, +/-90 swivel (maximum swivel angle depends on tv size) and +/-5 rotate for maximum viewing flexibility, provide smooth adjustment for all directions, make it easy to view your tv from multi-angles. Heavy duty steel construction and automatic robot welding technology this mount is constructed with heavy duty steel materials and with durable powder coated finish, and 100% welded by automatic robot, this advanced welding technology makes the mount sturdy and ensures mounted tv stable and secure, supports tv weight up to 60 lbs. Includes all necessary mounting hardware this mount ships with hardware for both wall and tv mounting, including bubble level. Anchor included is only for concrete wall installation!

Mounting Dream MD2413-MX TV Wall Mount Bracket of 26-55 Inch LED, LCD, OLED Flat Screen TV Full Motion Swivel Articulating Arm, up to VESA 400x400mm 60 LBS TiltingMounting-Dream-MD2413-MX-Articulating-400x400mm

Mounting Dream Md2413 Mx Articulating 400x400mm (Av Furniture) FAQ.

This is the first mounting dream tv wall mount i purchased and i liked it so much i bought a second mounting dream mount for a different tv. This bracket was amazingly simple to install once i purchased a stud finder with center finder. You only have to drill three holes, ratchet wrench three bolts in, adjust the level and you are good to go. It is nice that a level is provided with the install kit. I would recommend this mount or any mounting dream mount as everything you need to mount this on the wall is provided in well marked packaging. Directions are easy to follow and i had my tv up on the wall in just a few minutes. -Notice from S. Newell, Alaska

Click to Show mounting dream md2413 mx articulating 400x400mm (av furniture) Details

Very heavy , solid , high quality feeling mount very hard to beat for the money if i had to make any complaint it would be that the tv doesn't swivel very far up and down like to level it it does move a little bit maybe half inch up or down but it comes with a small level so when you're attaching it to the wall you keep it at least close to level i've seen other models that allow you to basically spin the tv in a circle if the chords didn't get tangled but still this is a very high quality mount for the money i couldn't have asked for anything better

Mounting-dream-md2413-mx-articulating-400x400mm-(av-furniture) set picture

- G. RoseI ordered this based on the overwhelmingly positive reviews, and it definitely lives up to them. The bracket is more than sturdy enough, installation was simple, and the included hardware is good quality as well. The little level that comes with it is a nice freebie - not a particularly great level, but the $99 bracket at the electronics store that shall not be named didn't include any tools, so what's to complain about? overall, i am very pleased with this mount. Note that the wall anchors that are included are intended for use in a concrete wall, not for drywall. If you can't screw directly into a stud and you have a hollow wall, use toggle bolts as other people have suggested.

Product arrived on time and intact. Very easy to install. Just make sure you find the wall stud. Comes with a good quality hdmi cable. Even the little leveler comes in handy for other projects. Like hanging pictures. . I used this to hang a 42" sony led in my home office. It looks fantastic and i can swivel it around or fold it away as needed. Plus, it didn't block any of the inputs on the back. Great product.

Q. Valdez, Franche-Comte

MOUNTING DREAM MD2413-MX TV WALL MOUNT BRACKET OF 26-55 INCH LED, LCD, OLED FLAT SCREEN TV FULL MOTION SWIVEL ARTICULATING ARM, UP TO VESA 400X400MM 60 LBS TILTING Benefit
Price :    $17.59 (was $25.96)
  • Us based customer support answers your pre-purchase and installation questions. our mount is 10-year warranted!
  • Easy installation with decent instruction and all included hardware in pre-labeled bags. +/-5 post-installation adjustment allows perfect tv leveling. comes with bubble level and velcro ties for cable management.
  • Technology of robot welding makes whole unit sturdy and safe.
  • Heavy duty unit fits for most of 26-55" tvs up to 60 lbs, with max vesa/mounting holes spacing of 400 x 400mm. our mounts are tested with 4 times loading weight claimed. images on left side will help you see if this mount perfectly fits your tv in the aspects: vesa, stud location and possible blocked input. not perfect? you can check other mounting dream mounts for best options.
  • Viewing becomes more comfortable: tilts tv up 5 and down 15 to reduce glare, swivels tv left or right according to your seats position. pull out to 19" and retract back to 2. 9", making your tv alive to move.
Brand :    mounting dream
Color :    TV Size 26"-55"
Model :    MD2413-MX
Quantity :    1
Order click here :    normally ships in 24 hours
Speakers :    Best Av Furniture (mounting dream product review) for Mounting Dream MD2413-MX TV Wall Mount Bracket of 26-55 Inch LED, LCD, OLED Flat Screen TV Full Motion Swivel Articulating Arm, up to VESA 400x400mm 60 LBS Tilting available ( Dec 2019 )

Mounting Dream MD2268-LK TV Wall Mount Tilting Bracket Most 42-70 Inch LED, LCD Plasma TVs up to VESA 600 x 400mm 132 LBS Loading Capacity, 6 FT HDMI Cable Torpedo Level

The mount works perfectly the only negative i have is that, ones the tv is mounted oin the wall it is impossible to assess the hdmi ports unless you take the tv off of the stand. Easy install and click in design for putting up and taking down the tv.

Fits 42-70" tvs this mount fits most of 42-70" tvs sold today. It fits tvs with mounting holes as close as 8"x4" or as wide as 24"x16" (in tv terms - vesa 200x100mm to 600x400mm). Low 1. 5" profile flush-tilt design is only 1. 5" from wall yet still tilts to improve viewing and reduce glare. Heavy duty steel construction and automatic robot welding technology this mount is constructed with heavy duty steel materials and with durable powder coated finish, and 100% welded by automatic robot, this advanced welding technology makes the mount sturdy and ensures mounted tv stable and secure, supports tv weight up to 132 lbs. Fits 16" or 24" studs plus concrete wall this mount fits for 16" or 24" studs plus concrete wall typical in us homes. Not for dry wall alone application. All installation hardware included. Torpedo bubble and 6' high speed hdmi cable it comes with torpedo level and 6' hdmi cable. Hdmi cable supports 3d, ethernet, 1440p and audio return conforming to latest hdmi 1. 4 standard. Includes all necessary mounting hardware this mount ships with hardware for both wall and tv mounting. Rohs certified this product is rohs certified, rohs is the european union directive standard of restriction of hazardous substance, aiming to protect human health and environment. Prevents falling off from both sides of horizontal bar you can slide the tv assembly left and right over the horizontal bar of the wall plate but still can prevent the tv assembly from falling off from the horizontal bar because of the stop plates at both ends of the bar.

Mounting Dream MD2268-LK TV Wall Mount Tilting Bracket Most 42-70 Inch LED, LCD Plasma TVs up to VESA 600 x 400mm 132 LBS Loading Capacity, 6 FT HDMI Cable Torpedo LevelMounting-Dream-MD2268-LK-Tilting-Capacity

Mounting Dream Md2268 Lk Tilting Capacity (Av Furniture) FAQ.

Made of heavy duty painted steel, this wall mount is extremely strong and well made. They provide a large package of mounting screws in different lengths and gauges to attach the bracket to your tv, so you can be assured that one set will fit. They also provide a large set of different sized spacers, so you can space the bracket away from the tv (necessary for some tvs). You can also use spacers to space the tv away from the bracket to allow it to tilt down more without the bottom edge hitting the wall. . It comes with heavy duty lag screws and washers, and even a torpedo level (handy) and a high-spec hdmi cable. They give you everything you need in one great package. -Notice from Y. Peggy, West Virginia

Click to Show mounting dream md2268 lk tilting capacity (av furniture) Details

Great mount simple and effective. Fits very tight to wall for a clean look. Hardly see and cables or brackets once mounted. Had all the proper hardware in the box ready to go. I mounted to studs only, if i were to hange from drywall (do not recommend) i would purchase different drywall anchors. The slotted holes didn't line up with my studs so i just drilled new holes in bracket, easy adjustment for me since i had the proper tools. Great mount at a great price!

Mounting-dream-md2268-lk-tilting-capacity-(av-furniture) set picture

- U. PeteThis was purchased for a 50" tv and i am very pleased with this. We have several televisions on the wall and this was the easiest one to install. The locking slides is a nice bonus and a good security feature for those homes that have kids playing nearby. This appears to be well made and with a great price. I would recommend this product.

All the reviews that say this is incredibly easy to mount are 100% correct. As easy as it gets to set up, and the end result is amazing. The tilt feature is worth it alone. Follow the instructions, and you won't have to worry.

T. Shayna, Maryland

MOUNTING DREAM MD2268-LK TV WALL MOUNT TILTING BRACKET MOST 42-70 INCH LED, LCD PLASMA TVS UP TO VESA 600 X 400MM 132 LBS LOADING CAPACITY, 6 FT HDMI CABLE TORPEDO LEVEL Advantage
Brand :    mounting dream
Color :    Black
Size :    42-70 Inch
Model :    MD2268-LK
Quantity :    1
Order click here :    normally ships in 24 hours
Home Theater :    Best Av Furniture (mounting dream product review) for Mounting Dream MD2268-LK TV Wall Mount Tilting Bracket Most 42-70 Inch LED, LCD Plasma TVs up to VESA 600 x 400mm 132 LBS Loading Capacity, 6 FT HDMI Cable Torpedo Level available ( Dec 2019 )
Price :    $21.96
  • Place your tv close to wall, 1. 5 flush profile, saving space greatly with stylish appearance.
  • Fits most 42-70" tvs up to 132 lbs, with max vesa/mounting holes spacing of 600 x 400mm. our mounts are tested 4 times loading weight claimed. images on left side will help you see if this mount perfectly fits your tv in the aspects: vesa, studs spacing and possible blocked input. not perfect? you can check other mounting dream mounts for best options.
  • Us based customer support answers your pre-purchase and installation questions. our mount is 10 year warranted!
  • Tilt your tv forward to reduce glare for better viewing.
  • Easy installation with decent instruction, and all included hardware in pre-labeled bags. pulling straps locks and releasestv breezily. comes with 6 ft hdmi, bubble level and velcro ties for cable management.

ECHOGEAR Full Motion Articulating TV Wall Mount Bracket 37-70 inch LED, LCD, OLED Plasma Flat Screen TVs w/ VESA patterns up to 600 x 400 - 16 Extension - EGLF1-BK

Featuring up to 150 of smooth swiveling capability, this large full-motion tv mount is a real mover. Not a shaker. Safety tested and ul certified to hold up to 132 lbs, you can rest assured your 37" - 70" led, lcd or plasma tv will be safe on the strong arm of this echogear tv mount. What the h is "ul certified"? it means we've tested this tv mount to verify that it will hold 4 times the weight rating and some safety science guys (that's a real thing) certified it. We'll do the math for you. 4 x 132 528 lbs! tech specs:vesa compatibility: 200x100 up to 600x400 (universal increments) tv extension from wall: 16" profile from wall (recessed) 2. 6" swivel: up to 150 degrees side-to-side (37" tv) tension adjustable? (for smoother/stiffer articulation): yes, using 7/32" hex key on joint bolts tilt: 5 up and 15 down post-install tv leveling adjustment: 3. 5 left or right wall plate dimensions: 17. 1" (w) x 10. 2" (h) max mounting hole dimensions: 16" (w) x 8. 9" (h) wall plate openings for in-wall cable management: 5. 6" (w) x 7. 6" (h) - two openings on each side construction: 100% high grade steel with plastic end caps for tv interface favorite color: echogear orangehdmi: v1. 4 high speed cable with bandwidth to support 1080p, 3d, and 4k/uhd 2160p picture 60 fps length: 6 ft. Install hardware included: 5/16" x 2. 75" lag bolts (4) lag bolt washers (4) m4 x 12mm screws (4) m4 x 35mm screws (4) m6 x 12mm screws (4) m6 x 35mm screws (4) m8 x 16mm screws (4) m8 x 20mm screws (4) m8 x 35mm screws (4) m4/m5 washers (4) m6/m8 washers (4) 22mm (7/8") tv spacers (4)

ECHOGEAR Full Motion Articulating TV Wall Mount Bracket 37-70 inch LED, LCD, OLED Plasma Flat Screen TVs w/ VESA patterns up to 600 x 400 - 16 Extension - EGLF1-BKECHOGEAR-Motion-Articulating-Bracket-patterns

ECHOGEAR FULL MOTION ARTICULATING TV WALL MOUNT BRACKET 37-70 INCH LED, LCD, OLED PLASMA FLAT SCREEN TVS W/ VESA PATTERNS UP TO 600 X 400 - 16 EXTENSION - EGLF1-BK Summary
Brand :    echogear
Size :    37-70 inch
Model :    EGLF1-BK
Quantity :    1
Order click here :    normally ships in 24 hours
Home Theater :    Best Av Furniture (echogear product review) for ECHOGEAR Full Motion Articulating TV Wall Mount Bracket 37-70 inch LED, LCD, OLED Plasma Flat Screen TVs w/ VESA patterns up to 600 x 400 - 16 Extension - EGLF1-BK available ( Dec 2019 )
Price :    $54.99 (was $79.99)
  • Pulling out to 16" and back in to 2. 6" from the wall gives your tv smooth moves. swivel your tv 150 degrees to the left or right to get all the views your room could ever need.
  • Feel the love with our 5-year warranty - included with all of our tv mounts.
  • Window glare bugging you? 15-degree tilt capability makes adjustments easy. no tools, no fuss, no hands. just kidding, you'll need your hands.
  • Mounting has never been so easy: 30 minutes to install on 16" studs, with all hardware included and pre-divided. our u. s. -based customer care team members will even pick up the phone on sundays. seriously.
  • Our heavy-gauge universal tv mount holds 37"-70" tvs weighing up to 132lbs. don't worry, we'll do the heavy lifting: echogear tv mounts are tested to hold 4 times the weight they're rated to. safety tested - ul certified.

Mounting Dream MD2380 TV Wall Mount Bracket 26-55 Inch LED, LCD, OLED Plasma Flat Screen TV, Full Motion Swivel Articulating Dual Arms, up to VESA 400x400mm 99 LBS Tilting

Great tv mount with amazing mobility. Similar mounts in stores are about 3x the price. It worked perfect for my 55" smart tv. I was only able to find 1 stud in the wall i wanted to mount on, since you need 2 to support the weight i used the included lag bolts in the middle of the bracket on the stud, then bought a pack of toggle bolts and installed those into the wall where the corners of the bracket are. Each lag bolt can support 100lbs, so with 4 of those and 2 lag bolts into the stud, my tv isn't going anywhere. Love it!

Fits 26-55" tvs this mount fits most of 26-55" tvs sold today. It fits tvs with mounting holes as close as 3"x3" or as wide as 16"x16" (in tv terms - vesa 75x75mm to 400x400mm). Specifically, it fits vesa 75x75mm, 100x100mm, 200x100mm, 200x150mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm. Retracts 3" low profile, extends 15. 2" from the wall with articulating arm, this mount retracts to 3"(to wall) to save space, and extends up to 15. 2" from the wall. Tilt, swivel and rotate function +5 /-15 tilt, +/-45 swivel and +/-3 rotation for maximum viewing flexibility, provide smooth adjustment for all directions, making it easy to view your tv from multi-angles. Heavy duty steel construction, 99 lbs loading capacity constructed with heavy duty steel materials with durable powder coated finish. This mount is 100% welded by automatic robot. This advanced welding technology makes the mount sturdy, and ensures mounted tv stable and secure, supporting tv weight up to 99 lbs. Bubble level and 6' high speed hdmi cable it comes with bubble level and 6' hdmi cable. Hdmi cable supports 3d, ethernet, 1440p and audio return conforming to latest hdmi 1. 4 standard. Includes all necessary mounting hardware this mount ships with hardware for both wall and tv mounting. Anchor included is only for concrete wall installation not for dry wall alone application! rohs certified this product is rohs certified (european union directive standard of restriction of hazardous substance), aiming to protect human health and environment.

Mounting Dream MD2380 TV Wall Mount Bracket 26-55 Inch LED, LCD, OLED Plasma Flat Screen TV, Full Motion Swivel Articulating Dual Arms, up to VESA 400x400mm 99 LBS TiltingMounting-Dream-Bracket-Articulating-400x400mm

Mounting Dream Bracket Articulating 400x400mm (Av Furniture) FAQ.

I really do not know very much about mounting tv's so this might not be the best review to judge by. It was fairly easy to install. But once the tv was up it was hard to adjust. It was very crooked at first so we had to unscrew and adjust several times. This was a little irritating because i am short and had to work at an awkward angle on a step stool to reach where we mounted it. There was a measurement graph that you put on the wall to mark where everything is going to go before actually mounting the hardware. We thought that was really cool but it wasn't perfect. The tv still sits at a slight angle but we've managed to level it out enough that we don't notice it anymore. -Notice from B. Courtney, Nevada

Click to Show mounting dream bracket articulating 400x400mm (av furniture) Details

Versatile articulating panel tv bracket puts your tv exactly where you want it! get the viewing angle right whether you tilt the tv down or aim it to the left or right for the best view. . I found this to be a quality, solidly constructed, articulating wall mount for my 55" tv. This model is designed for wall studs with 16" centers. Studs further apart require a different model. . Caveats:. 1. Drywall alone will not provide adequate support. The mount itself is heavy and built for large tvs and an overkill on a small tv. 2. Centering on a wall. If mounting on wood studs with 16" centers, you may not be able to place the mount exactly where you want. The mounting frame itself is approximately 17". Centering may require additional materials. 3. Try to obtain a mounting template from the seller before purchase to avoid a return. . It can also be mounted on solid wood or concrete. I mounted mine on cultured. Stone, which is made from concrete. It is not real stone. . Mounting on concrete requires a "hammer drill" and hammer drill bit for concrete, so an investment in equipment may be required. Tapcon concrete screws can usually be screwed into the drilled holes and provide strong support. It is much easier to attach to wood wall studs with wood screws. Studs may not, however, always be exactly 16" apart. . It will take two people to lift a large tv onto the mount. Much of the wiring could be done before the lift. Since the mount adjusts, you do have adequate clearance to place wiring after the tv is installed. . The mount is very compact and is inconspicuous. The tv moves freely to tilt up or down, or side to side. The more it is adjusted, the more wall clearance is required, thereby requiring you to pull the bracket forward. . The instructions are excellent. Parts for installing various tvs are provided. A free hdmi cord, a level and assorted spacers are included. A template is also provided to mark where fasteners should be located.

Mounting-dream-bracket-articulating-400x400mm-(av-furniture) set picture

- . AnonymousI was suprised with all the hardware this comes with. It came with multiple metric bolts for different thread sizes for different tv's. It comes with everything you need. As long as you mount it to a stud its not going anywhere.

I love this mount! i wanted one with full range and i felt that this mount did a good job providing swivel and tilt options. However, the directions were extremely overwhelming when we opened the box. There are a lot of parts and detailed instructions. I think this is because there are multiple ways you can hang it (using studs in the wall frame or just on solid wall). We ended up modifying the instructions to use our own method. We got it up and i think it looks great in the living room. Very happy with the purchase!

F. Powell, Swindon

MOUNTING DREAM MD2380 TV WALL MOUNT BRACKET 26-55 INCH LED, LCD, OLED PLASMA FLAT SCREEN TV, FULL MOTION SWIVEL ARTICULATING DUAL ARMS, UP TO VESA 400X400MM 99 LBS TILTING Review
Brand :    mounting dream
Color :    16" Wood Stud
Size :    16" Wood stud
Model :    FBA_LYSB00SFSU53G-ELECTRNCS
Quantity :    1
Order click here :    normally ships in 24 hours
Home Theater :    Best Av Furniture (mounting dream product review) for Mounting Dream MD2380 TV Wall Mount Bracket 26-55 Inch LED, LCD, OLED Plasma Flat Screen TV, Full Motion Swivel Articulating Dual Arms, up to VESA 400x400mm 99 LBS Tilting available ( Dec 2019 )
Price :    $27.99 (was $34.99)
  • Viewing becomes more comfortable: tilts tv up 5 and down 15 to reduce glare, swivels tv left or right according to your seats position. pull out to 15. 8 and retract back to 3. 6, making your tv alive to move
  • Technology of robot welding makes whole unit sturdy and safe.
  • Us based customer support answers your pre-purchase and installation questions. our mount is 10 year warranted!
  • Heavy duty unit fits for most of 26-55" tvs up to 99 lbs, with max vesa of 400 x 400mm/mounting holes spacing. our mounts are tested with 4 times loading listed. images on left side will help you see if this mount perfectly fits your tv in the aspects: like vesa, 16" studs spacing and possible blocked input. not perfect? you can check other mounting dream mounts for best options.
  • Easy installation with decent instruction and all included hardware in pre-labeled bags. +/-3 post-installation adjustment allows perfect tv leveling. comes with 6 hdmi and torpedo level as gifts.

PowerBridge TWO-CK Dual Outlet Recessed In-Wall Cable Management System PowerConnect Wall-Mounted Flat Screen LED, LCD, Plasma TV s

Conceal cables and power for your wall mounted tv. Introducing the all new two-ck in-wall power and cable management system. Dual-gang size all-in-one design. Designed to simplify wiring behind wall-mounted flat-panel tv. This discreet system allows low voltage cables and wires to be routed through the wall for a clean look. Code compliant to install power, includes hardware and helpful mounting template make the two-ck the perfect do-it-yourself solution for any skill level, without the need for an electrician. No wiring, simple snap together power connectors make this safe and easy.

PowerBridge TWO-CK Dual Outlet Recessed In-Wall Cable Management System PowerConnect Wall-Mounted Flat Screen LED, LCD, Plasma TV sPowerBridge-TWO-CK-Management-PowerConnect-Wall-Mounted

POWERBRIDGE TWO-CK DUAL OUTLET RECESSED IN-WALL CABLE MANAGEMENT SYSTEM POWERCONNECT WALL-MOUNTED FLAT SCREEN LED, LCD, PLASMA TV S Featured
Brand :    powerbridge solutions
Color :    White
  • Included recessed wall mount plates are hidden behind flat screen tv mount and should work with the thinnest tv mounts and thinnest tv's on the market.
  • The included in-wall powerconnect cable and 6-foot power cord is code compliant. does not include hdmi cables or other low voltage audio visual cables.
  • This system allows for wall mounted tv's to hide low-voltage cables and wires routed behind the wall for a clean look.
  • Dual outlet in-wall cable management system for wall mounted flat screen led, lcd, and plasma televisions. this kit includes two power outlets for mounting either two (2) tv's or one (1) tv and one (1) audio visual accessory such as a soundbar.
  • No more messy cables hanging down the wall between the tv and the floor. no electrician needed with snap together power connectors.
Price :    $62.96 (was $69.95)
Model :    TWO-CK
Quantity :    1
Order click here :    normally ships in 24 hours
Speakers :    Best Ce Accessory (powerbridge solutions product review) for PowerBridge TWO-CK Dual Outlet Recessed In-Wall Cable Management System PowerConnect Wall-Mounted Flat Screen LED, LCD, Plasma TV s available ( Dec 2019 )

Mounting Dream MD2380-24 TV Wall Mount Bracket 26-55 Inch Flat Screen TV, Full Motion Swivel Articulating Dual Arms, up to VESA 400x400mm 99 LBS Fits Stud Spacing up to 24 Inch

Comes with all mounting components and great directions. More solid than i expected (it is very stable, no wobble or bouncing). Holds a 48 inch led tv with no problems. Can be adjusted in and out and panned side to side. It can be tilted, but it requires tools. The only possible drawback is cable management. Since the arms collapse into the frame, the cables can get caught if you don't route and secure them well. The bracket does come with a plastic clip and three velcro 'ties', but the routing is still slightly difficult to make sure that they don't get caught. Overall, i would recommend.

Fits 16', 18', 24' wood stud spacing one-piece 24' wall plate can work on most of wood stud spacing; easy centering for wood stud spacing less than 24'. Caution: this mount is not for drywall alone installation! fits 26-55" tvs this mount fits most of 26-55" tvs sold today. It fits tvs with mounting holes as close as 3"x3" or as wide as 16"x16" (in tv terms - vesa 75x75mm to 400x400mm). Specifically, it fits vesa 75x75mm, 100x100mm, 200x100mm, 200x150mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm. Retracts 3" low profile, extends 15. 2" from the wall with articulating arm, this mount retracts to 3"(to wall) to save space, and extends up to 15. 2" from the wall. Tilt, swivel and rotate function +5 /-15 tilt, +/-45 swivel and +/-3 rotation for maximum viewing flexibility, provide smooth adjustment for all directions, making it easy to view your tv from multi-angles. Heavy duty steel construction, 99 lbs loading capacity constructed with heavy duty steel materials with durable powder coated finish. This mount is 100% welded by automatic robot. This advanced welding technology makes the mount sturdy, and ensures mounted tv stable and secure, supporting tv weight up to 99 lbs. Torpedo level and 6' high speed hdmi cable it comes with torpedo level and 6' hdmi cable. Hdmi cable supports 3d, ethernet, 1440p and audio return conforming to latest hdmi 1. 4 standard. Includes all necessary mounting hardware this mount ships with hardware for both wall and tv mounting. Anchor included is only for concrete wall installation not for dry wall alone application!

Mounting Dream MD2380-24 TV Wall Mount Bracket 26-55 Inch Flat Screen TV, Full Motion Swivel Articulating Dual Arms, up to VESA 400x400mm 99 LBS Fits Stud Spacing up to 24 InchMounting-Dream-MD2380-24-Articulating-400x400mm

Mounting Dream Md2380 24 Articulating 400x400mm (Consumer Electronics) FAQ.

I was super impressed with this mounting system. Came with everything. And i mean everything to mount it. Surprised they didn't ship a drill with it as well. Has multiple levels, all the screws you could dream of, and surprisingly clear directions. They give you straight forward information about the options for mounting. No wiggle, and takes a little effort to move the tv around which is good so it's not just swinging in the breeze. Really like this mount and will be suggesting them to friends. -Notice from J. Linda, Florida

Click to Show mounting dream md2380 24 articulating 400x400mm (consumer electronics) Details

I used the -24 model to mount a sony 55x900e to a stud wall. Worked like a charm, even when full extended. Decent instructions and easy to adjust. I appreciated how heavy the mount was, considering it was holding up some expensive electronics. I couldn't exactly center the mount, but hole openings and other adjustments allowed me to center the television on the wall, even though the mount itself wasn't. Glad i didn't buy on that costs 2x or 3x as much, you wouldn't get more for your money.

Mounting-dream-md2380-24-articulating-400x400mm-(consumer-electronics) set picture

- B. HaywardIt is more compact than some but gets the job done for a great price. . The instructions were clear to me but this is not the first wall mount i have installed. The template supplied really made marking the wall a snap. I mounted it to studs that were 16 inches apart. (suggestion - use a hole punch and punch out the cardboard markings where the screws are to be placed. This makes it easy to mark the exact placement with a pencil. ) when mounted it can be adjusted multiple ways. Tilt forward down, up move right and left. Be sure to tighten the screw controlling tilt and the one securing the versa mount to the rail. I looked at a similar mount selling for $139. 99 today. Quite similar. The online store sold mounting dream was a much better buy.

Comes with a very stiff cardboard template with sticky strips on the back, plus two levels. One sticks on the template, the other is just a typical small spirit level. . I would prefer that the template have the center point indicated. I had to fold the template both ways to find the center, which i used to figure out where it needed to be on the wall. Then i adjusted slightly to hit the studs. With the template on the wall i pre drilled the mount holes and used the included lag bolts to mount it. The mount is of course pretty heavy, so it s definitelt a two person job, but it took less than half an hour start to finish.

. Donna, West Sussex

MOUNTING DREAM MD2380-24 TV WALL MOUNT BRACKET 26-55 INCH FLAT SCREEN TV, FULL MOTION SWIVEL ARTICULATING DUAL ARMS, UP TO VESA 400X400MM 99 LBS FITS STUD SPACING UP TO 24 INCH Pros
Price :    $39.59 (was $48.99)
  • One-piece long wall plate: fits for solid concrete wall/ wood stud spacing of 16', 18', 24'. easy centering (lateral adjustment) with this long wall plate, and paper template for easy installation. caution: this mount is not for drywall alone installation!
  • Easy installation with decent instruction and all included hardware in pre-labeled bags. +/-3 post-installation adjustment allows perfect tv leveling. comes with 6 ft hdmi and torpedo level as gifts.
  • Heavy duty unit fits for most of 26-55" tvs up to 99 lbs, with max vesa of 400 x 400mm/mounting holes spacing. our mounts are tested with 4 times loading capacity listed. images on left side will help you see if this mount perfectly fits your tv in the aspects: like vesa, studs spacing and possible blocked input. not perfect? you can check other mounting dream mounts for best options.
  • Viewing becomes more comfortable: tilts tv up 5 and down 15 to reduce glare, swivels tv left or right according to your seats position. pull out to 15. 2 inch and retract back to 3 inch, making your tv alive to move.
  • Us based customer support answers your pre-purchase and installation questions. our mount is 10-year warranted!
Brand :    mounting dream
Color :    16"-24" Wood Stud
Size :    16"-24" wood stud
Model :    MD2380-24
Quantity :    1
Order click here :    normally ships in 24 hours
Ce :    Best Consumer Electronics (mounting dream product review) for Mounting Dream MD2380-24 TV Wall Mount Bracket 26-55 Inch Flat Screen TV, Full Motion Swivel Articulating Dual Arms, up to VESA 400x400mm 99 LBS Fits Stud Spacing up to 24 Inch available ( Dec 2019 )

Samsung Electronics UN65MU6300 65-Inch 4K Ultra HD Smart LED TV 2017 Model

I was hesitant to pull the trigger on a new tv, but i'm i glad i did and chose this one. I had planned to spend all evening setting it up and had prepared myself to run into snags. This was a piece of cake! delivery service was excellent. They kept me informed all along the way and even called to ask if they could deliver early. The delivery men were courteous and professional and carried it upstairs for me. It took me less than 30 minutes to get it out of the box, set up and all my connections and apps working. The longest part was getting it out of the box, attaching the stand and lifting it up all by myself. And even that was easy and only about 10 minutes. This tv set itself up! it found my wifi network, internet, accessories and the accounts for my apps so seamlessly. I was watching tv in less than 30 minutes from delivery. I went from a 10 yr old 37" model to this 55" uhd. The picture is amazing, and so lifelike. It's almost 3d. Will take a little getting used to such clear and deep resolution. I watched my gopro travel videos on youtube and the picture quality was just amazing! i am really glad i selected this brand and model. So much easier than setting up a smart phone or new computer even!

The samsung mu6300 ultra hdtv redefines the viewing experience by producing a colorful high dynamic range (hdr) picture. Our new smart tv user-interface (ui), the new smart remote controller with voice navigation capability provides faster access to your favorite streaming content choices and more.

Samsung Electronics UN65MU6300 65-Inch 4K Ultra HD Smart LED TV 2017 ModelSamsung-Electronics-UN65MU6300-65-Inch-Ultra

Samsung Electronics Un65mu6300 65-inch 4k Ultra Hd Smart Led Tv 2017 Model (un65mu6300fxza) FAQ.

I bought this to place in my bar/mancave the men have commented on the high quality picture and ask questions that i could not answer. I just gave them the book that came with it so they could purchase one. Great value and great picture -Notice from . Betty, North Yorkshire

Click to Show samsung electronics un65mu6300 65-inch 4k ultra hd smart led tv 2017 model (un65mu6300fxza) Details

This was my first smart tv and i was blown away by what it could do. We have actually got rid of our cable and solely use apps such as netlflix and hulu. It's the tv you want to have in your home, especially if you are a tech person or have online streaming devices. . The clarity on the tv is amazing as well!

Samsung-electronics-un65mu6300-65-inch-4k-ultra-hd-smart-led-tv-2017-model-(un65mu6300fxza) set picture

- V. ImeldaLoving this samsung 43 tv. I purchased this for my bedroom, and could not be happier with the picture and sound quality it produces. The set is sleek and beautiful on my dresser. Love the smart features it offers, which easily lets me view netflix and hbo without any additional equipment.

So far for a bedroom tv this is just what i needed and much better then expected from all the reviews ( which were all over the charts). I will not use for gaming as i have a g-sync 165hrz monitor for my gaming pc. The picture is really good once you work with the settings a bit. I really love the remote and it works with my xfinity cable box just great! the remote also turns on my roku box and works well with it . Tho you need to have the tv set to home screen for the roku box to shut down on its own. I would mention that one thing that helped me out a lot was downloading the e-manual and reading it thru. I have also paired the tv with bluetooth senso headphones for night time and have not had any trouble with them disconnecting. . There is one con which i have seen reported in other reviews and that is the power cord connection to the back of the tv, the cord is real easy to knock out, so i replace that. It does not bug me enough to take a star off

P. April, Mississippi

SAMSUNG ELECTRONICS UN65MU6300 65-INCH 4K ULTRA HD SMART LED TV 2017 MODEL Featured
Price :    $754.05 (was $1191.90)
  • Smooth action on fast-moving content with motion rate 120
  • Please note the differences between the mu6300 and the mu630d. mu6300: black cabinet, 450 nits hdr sustained brightness, mega dynamic contrast mu630d: dark titan cabinet, 430 nits hdr sustained brightness, ultra dynamic contrast
  • 4x more pixels than full hd means you're getting 4x the resolution, so you'll clearly see the difference.
  • Oneremote automatically detects and controls all your connected devices and content with no manual programming required*.
  • See vibrant and pure color for a realistic experience. stand size (wxhxd): 37. 9 x 8. 7 x 14. 5 inches
Brand :    samsung
Color :    NA
Size :    65-Inch
Weight :    56.70 pounds
Model :    UN65MU6300FXZA
Quantity :    1
Order click here :    normally ships in 24 hours
Home Theater :    Best Television (samsung product review) for Samsung Electronics UN65MU6300 65-Inch 4K Ultra HD Smart LED TV 2017 Model available ( Dec 2019 )

Sony XBR65X850E 65-Inch 4K Ultra HD Smart LED TV 2017 Model

Sony xbr65x850e 65-inch 4k ultra hd smart led tv (2017 model)

Sony XBR65X850E 65-Inch 4K Ultra HD Smart LED TV 2017 ModelSony-XBR65X850E-65-Inch-Ultra-Smart

SONY XBR65X850E 65-INCH 4K ULTRA HD SMART LED TV 2017 MODEL Features
Brand :    sony
Color :    65-Inch
Size :    65-Inch
Weight :    77.16 pounds
Model :    XBR-65X850E
Quantity :    1
Order click here :    normally ships in 24 hours
  • Pairs 4k ultra hd picture clarity with the contrast, color, and detail of high dynamic range (hdr) for the most lifelike picture.
  • Edge-lit led produces great picture quality with sleek slim design. motionflowtm xr keeps the action smooth
  • 120hz native refresh rate plus motionflow xr gives you fast moving action scenes with virtually no motion blur
  • Dimensions (w x h x d): tv without stand: 57. 3" x 33. 1" x 1. 8", tv with stand: 57. 3" x 35. 8" x 10. 5"
  • Smart functionality gives you access to your favorite apps and content using sony's android tv.
Price :    $988.35 (was $1198.00)
Home Theater :    Best Television (sony product review) for Sony XBR65X850E 65-Inch 4K Ultra HD Smart LED TV 2017 Model available ( Dec 2019 )

OmniMount ECSB Component Shelf Wall Shelf TVs Video Accessories

The ecs is a glass wall shelf that is designed to hold a cable box, dvd player, or virtually any other component that needs to be located near a mounted television. Whats in the box : 8mm tempered glass shelf, wall plate, pivoting arm and complete hardware kit

OmniMount ECSB Component Shelf Wall Shelf TVs Video AccessoriesOmniMount-ECSB-Component-Shelf-Accessories

OMNIMOUNT ECSB COMPONENT SHELF WALL SHELF TVS VIDEO ACCESSORIES Feature
Price :    $25.00 (was $29.99)
  • Tempered glass shelf with metal wall plate, concealed bolts and integrated cable management
  • Includes complete hardware kit for installation, single-stud mounting
  • Holds dvd player, vcr, cable box, satellite, etc. , with support for up to 30 lbs
  • Dimensions: 18. 0 x 9. 1 x 20. 1 inches (457 x 231 x 571 mm) (w x h x d)
  • Pivoting arm for side-to-side movement, black nylon stabilizing strap
Brand :    omnimount
Color :    Black
Size :    One Size
Weight :    13.30 pounds
Model :    ECSB
Quantity :    1
Order click here :    normally ships in 24 hours
Speakers :    Best Av Furniture (Speakers product review) for OmniMount ECSB Component Shelf Wall Shelf TVs Video Accessories available ( Dec 2019 )

Mounting Dream MD2298 Premium TV Wall Mount Bracket Fits 16, 18, 24 inch Wood Stud Spacing Full Motion Articulating Arm 42-70 Inch LED, LCD Plasma TV up to VESA 600x400mm 132 lbs

Very easy to install. This is my first time to install a tv mount. There is a paper template that you can tape to the wall to layout the drill holes. . I installed a 65inch samsung ks8000 and the included screws are not long enough. I went to homedepot and got 4 screws for about $5. Everything works out perfectly.

Fits 42-70" tvs this mount fits most of 42-70"lcd/led/plasma tvs sold today. It fits tvs with mounting holes as close as 8"x8" or as wide as 24"x16" (in tv terms - vesa 200x200mm to 600x400mm). Specifically, it fits vesa 200x200, 300x200, 300x300, 400x200, 400x300, 400x400, 500x300, 600x200, 600x400mm) fits wood stud spacing of 16" and 24", one-piece long wall plate design fits for solid concrete wall and wood stud spacing of 16" and 24". One piece wall plate design differs from wall plate which is knocked down into two pieces, no need wall plate assembly. Long wall plate provides centering flexibility for wood stud installation and no need extra extension bracket or polywoods. Smart tv hanging design and safe guard clips brackets attached with tv hang onto wall plate easily, two tube clips lock brackets with tv onto wall plate in safe manner supreme dual arms with 132 lbs loading capacity dual arms extends to 18. 5", and retracts to 2. 5" to save place. It adopts automatic robot welding technology for smooth and stable movements, holding tv up to 132 lbs full motion with dual spring loaded handles with +5 /-15 tilt, +/-45 swivel and +/-3 rotation, the mount maximizes viewing flexibility. Post-installation level adjustment allows the tv to perfectly level. Dual spring-loaded handles enhance stability cable management cable clips and velcro cable ties offer cable management for neat look includes all necessary mounting hardware, 6' hdmi cable and bubble level this mount ships with hardware for both wall and tv mounting. Bubble level makes leveling work easy and convenient heavy duty steel construction and rohs certified constructed with heavy duty steel materials with durable powder coated finish. This product is rohs certified (european union directive standard of restriction of hazardous substance), aiming to protect human health and environment

Mounting Dream MD2298 Premium TV Wall Mount Bracket Fits 16, 18, 24 inch Wood Stud Spacing Full Motion Articulating Arm 42-70 Inch LED, LCD Plasma TV up to VESA 600x400mm 132 lbsMounting-Dream-MD2298-Articulating-600x400mm

Mounting Dream Md2298 Articulating 600x400mm (Av Furniture) FAQ.

Excellent tv wall mount. Looks and feels durable. Easy to mount. Great price compare to big brand stores. Although it came with a variety of screws sizes, i just wish that screws for use on samsung tv are bit longer, however, i can still manage to make it worked. Would recommend to everyone. -Notice from P. Gladys, Texas

Click to Show mounting dream md2298 articulating 600x400mm (av furniture) Details

Heavy duty wall mount! . Installation was quit simple; they even include a little level and a template with adhesive tape to stick to the wall to make sure you drill in the correct place. Takes the fear out of drill holes in your walls! . . I put a 65 inch lg near a corner on this mount. Works great! . . Customer service was very helpful before the purchase. After buying a mount that didn t fit the curvature of the back of the lg, in spite of what the box indicated, i emailed this company with a picture of the back of my tv and the model number and they recommended this model. Great help!

Mounting-dream-md2298-articulating-600x400mm-(av-furniture) set picture

- . AnonymousVery stable product. Excellent build and materials and hardware that were supplied were great for any set up. Didnt need to buy anything and the 24" wall plate is the way to go. Paid a little more for this product than others that claim to be like it and i am glad i did. Very fast shipping.

Great product so far! been up for over a week with our 65 inch lg tv. Went up easy. Very heavy duty. Worth the $

X. Alberta, Wigan

MOUNTING DREAM MD2298 PREMIUM TV WALL MOUNT BRACKET FITS 16, 18, 24 INCH WOOD STUD SPACING FULL MOTION ARTICULATING ARM 42-70 INCH LED, LCD PLASMA TV UP TO VESA 600X400MM 132 LBS Features
Brand :    mounting dream
Color :    16"-24" wood stud
Model :    MD2298
Quantity :    1
Order click here :    normally ships in 24 hours
Ce :    Best Av Furniture (mounting dream product review) for Mounting Dream MD2298 Premium TV Wall Mount Bracket Fits 16, 18, 24 inch Wood Stud Spacing Full Motion Articulating Arm 42-70 Inch LED, LCD Plasma TV up to VESA 600x400mm 132 lbs available ( Dec 2019 )
Price :    $50.99 (was $67.99)
  • One-piece long wall plate: fits for solid concrete wall/wood stud spacing of 16"and 24", caution:this mount is not for dry wall alone installatoin! easy centering with this long wall plate, and with paper template for easy installation.
  • Supreme arms: holds tv up to 132 lbs with 18. 5" extension and 2. 7" depth to wall, adopting automatic robot welding technology for smooth and stable movements. cable clips on arms offer cable management for neat look.
  • Fits for most of 42-70" lcd/led/plasma tvs in 132 lbs, with max vesa of 600x400mm/24" x 16" (from 200x200, 300x200, 300x300, 400x200, 400x300, 400x400, 500x300, 600x200, to 600x400mm). please check vesa (mounting holes pattern), studs spacing, possible blocked cable/input and tv weight to ensure compatibility.
  • Smart tv hanging design: brackets attached with tv hang onto wall plate easily, two tube clips lock brackets with tv onto wall plate in safe manner.
  • Full motion: +5 /-15 tilt, +/-45 swivel and +/-3 rotation for maximum viewing flexibility. dual spring-loaded handles design for easy tilting angle adjustment. all hardware, 6' hdmi cable, bubble level included. finish of the mount and all hardware is rohs (restriction of hazardous substance) certified.

mounting dream md2296 tv wall mount bracket for most 42-70 inch led, lcd and oled flat screen tv, with full motion swivel articulating arms, up to vesa 600 x 400mm and 100 lbs Price : 30, was : 54 as 2018-01-12
USUKDEFRESITJPCNCAGlobal
United States
Great Britain
German
France
Spain
Italy
Japan
China
Canada
World Wide
Mounting Dream Md2296 Bracket Articulating (Av Furniture) Reviewed by on puqus.com

Top mounting dream md2296 bracket articulating (av furniture) Content

The F.A.Q. for mounting dream md2296 tv wall mount bracket for most 42-70 inch led, lcd and oled flat screen tv, with full motion swivel articulating arms, up to vesa 600 x 400mm and 100 lbs

I really like this mount! i installed it myself, but the instructions were a little tricky (i think i cried at one point). None-the-less, i think they aren't that bad, considering i was able to successfully mount my 48-in samsung flatscreen singlehandedly. It's been holding my tv well and has great extension and turning capabilities. A little stiff to move regularly, however. Also, i don't know if it's just mine, but the tilting screw keeps coming loose, so the tv is always sloped downward. Do put the hdmi and cables in before mounting, as it's nearly impossible to do afterward.

A number of questions have been asked here.

Showing 20 Q&A on Mounting-Dream-MD2296-Bracket-Articulating

(0) Question: Will this be compatible with sony xbr55a1e


(1) Question: Will this work with the vizeo m65 series?


(2) Question: Is there an addon bracket for the cable box? model number? thank you!


(3) Question: Will it work on a samsung ks8000?


(4) Question: Can this hold a tv with vesa pattern 300 x 500?


(5) Question: Can i use this mount for metal studs?


(6) Question: Will this work with samsung un55j6201afxza?


(7) Question: Will this be compatible with a tcl 4k hdr flat screen tv?


(8) Question: This mount is very stiff and difficult to move. can you loosen the arms of it?


(9) Question: Once the bracket is on the wall, can the tv be shifted left or right in position to center it on a location on the wall?


(10) Question: I have sony bravia kdl40v3000 and wondering if this is the best option for me as i would like flexibility to put larger tv in the future.


(11) Question: I am mounting off center. from what i read the tv can be mounted left or right of center, on the brackets, a maximum of 3 inches? correct?


(12) Question: Will this fit my lg uh6090 with a 300x300 vesa? may be a dumb question, but i want to be sure.


(13) Question: Will this fit the lg oled65c6p?


(14) Question: I want to center this on a wall above a cabinet but the studs are not centered on the wall. is the wall bracket adjustable so i can do this?


(15) Question: This works for a samgsung tv un60ju6390fxza ?


(16) Question: Will this work with 2017 lg 6ouj77? i was told to stick to an lg bracket as others would not fit properly?



(note) Question: where/how to get Mounting Dream (manufacturer's brand) accessories & similiar Mounting Dream's products

Click to Show/Hide the Answer
Answer:

Click on the marked text to copy to Clipboard

Excellent mount, good instructions, very heavy-duty metal. I've got my 60" led samsung mounted on it in my living room, and if i ever need to mount another tv, i will definitely be buying another one of these.


Accessories & Supplies 704182, Audio & Video Accessories 235271, Electronics 282271, TV Accessories & Parts 466271, TV Ceiling & Wall Mounts 697067Top Mounting Dream Md2296 Bracket Articulating (Av Furniture) FAQ Content

Best mounting dream md2296 bracket articulating (av furniture) in review

Such a good product for the price. Very sturdy! kind of heavy but really helps the confidence in it holding your tv. Took about an hour to set it all up with 2 people. Very nice and easy motion. Other than needing a separate extension for the 24" studs this mount is amazing. ! . . *does not fit 24"studs, you'll need extention kit "md5231" which is also available on online store rather cheap*

G. Watson, Massachusetts

You might like to see - 180-degree panoramic hd wifi video monitoring surveillance security camera, two-way audio, night vision & free cloud the tend insights v-series video monitors help you stay connected to the people, places and pets that you value most-no matter where you are. now all tend insights v-series video monitors -kodak cfh-v20 - 180-degree panoramic hd wifi video monitoring surveillance security camera, two-way audio, night vision & free cloud storage
  • Attribute: 180-degree View - See The Entire Room In Stunning Hd Video Quality During The Day Or At Night.
  • Attribute: Wide Dynamic Range - Enjoy Enhanced Image Quality In Scenes With Extreme Lighting Conditions.
Half Price Kodak Cfh V20 180 Degree Monitoring Surveillance (Surveilance Systems) Cfh V20 Kodak Cfh V20 180 Degree Monitoring Surveillance (Surveilance
Or you might like to consider Case All-new Fire 7 Tablet 7th Generation, 2017 Release - Slim Folding Stand Cover Case Fire 7, Black Auto Wake / Compatibility: Custom Designed For Your Precious All-new Online Store Fire 7 2017 Tablet, This Moko Case Features A Combination Of Functionality And Style. Well Built To Protect Your -Moko Case All-new Fire 7 Tablet 7th Generation, 2017 Release - Slim Folding Stand Cover Case Fire 7, Black Auto Wake / Sleep
  1. Bonus: Lightweight And Protective. Premium Pu Leather Exterior And Microfiber Interior.
  2. Bonus: Built In Flip Stand With Typing And Viewing Angles. Magnetic Closure And Stylus Loop.
Price Fall Moko All New Generation Release (Consumer Electronics) Moko All New Generation Release (Consumer

R. Nellie, City of Kingston upon Hull says

I love this wall mount! i actually ordered a flat mount before this one and i am so glad that i decided to upgrade to this mount. First of all, installation was pretty easy. You want to be sure it is even and hitting studs so it does take a lot of measuring and planning but overall it was easy. I really like that it has a small leveler on the planning paper that you stick to the wall so you can make sure where the bolts go are completely level. The mount is very heavy so i was a bit worried that it would be too much weight with the tv but i was wrong- the bolts are so much stronger and thicker than the previous mount i had bought and it is so sturdy with the metal that your tv is completely snug. I love it and am so glad i got it!

. Cortney, Baden-Wuerttemberg

Well built. Very strong. Super easy to install. Took me all of 10 minutes to install this unit to a wall with a 49" tv. Not joking. The tv i mounted had a 300 x 300 vesa pattern, so i was able to use x-plate with out the vertical and horizontal cross members. I am sure that saved time, but maybe and extra 15 minutes max. My vizio m492i-b2 tv came with m6 x 8mm screws, so i used them instead of the ones supplied by mounting dream. However, there a multiple sizes and lengths of screws along with spacers to accommodate most tv's in its range. . I have installed roughly 5 different types of tv mounts from 32" tv to 65" tv and the mounting dream was by far the absolute easiest that i have installed to date. I would buy this again before any other mount and highly recommend it. . Note to mounting dream: since this unit is so well constructed of heavy guage steel, it did make holding the unit to the wall to mark the drill holes somewhat of a challenge. I strongly recommend that you include a paper template that can be taped to the wall and used from drilling the mount holes, in the case that the installer does not have a second set of hands to hold the mount securely while marking.

N. Veronica, Lincolnshire says

Worked out very well with my 60" sharp mounted in a corner. Exactly what i expected, down to the fact that i can't mount centered on 45 as the tv is too wide for the reach of this arm. I considered stepping off the wall to extend the reach, but the angle i ended up with works well with the room. I did offset the tv to the extent of the bracket to gain the maximum angle i could.

. Patricia, North Somerset

Mounted a 65in tv to the wall with this bad boy. Super easy but i recommend two people total with this. I guess the difficulty would also depend on the size of the tv and how heavy it is. If you do have a large tv, it is rather difficult pushing it back against the wall. It may be the stiffness of the brackets or just the size of the tv, but i basically left it at a certain point and am happy with its position. Recommended.

X. Benton, Blackpool says

Nothing wrong with this bracket. Does everything it claims to do, well. It is sturdy and provides a stable support for my 70" tv. I simply should have chosen a different type of bracket that allows for some x-y translation of the tv, after everything has been bolted together. . My fitting space was within 1/2 " along x-axis and i nailed it pretty good! ('cuz i am 'da x-man' ; ), but on the y-axis i made an assumption that the bracket will be at the geometric center of the tv and lg decided to off-set it some 4" - so my tv cannot fit y-wise. Now i'll have to dismantle it from the wall and drill another set of holes (in the brick :( to fix this offset . Should i have chosen a bracket that allowed for post-mortem x, y correction within 4" i could have saved myself the extra "fun" and the family comments ; )

J. Ruff, District of Columbia

Sturdy as hell! great instructions with a super helpful mounting template. Only con might be the tilt system. The nut is in a plastic lever that just barely gets tight enough to avoid interference when pushing the tv all the way back against the wall. I was worried about breaking the plastic as i tightened it down so hard. Everything but that lever is strong as hell, though. It also comes with a plethora of screws to mount to many types of tv.

I. Guest, Barnet says

My second mounting dream tv wall mount bracket and there's a reason. This is the most well made and well engineered product i've purchased in a long time and mounting couldn't be easier. All of the different parts are clearly marked and the instructions are written that anyone, and i mean anyone, should be able to put this together. Depending on how high you plan on hanging this, and how big your television is, you will need at least two people to hang the tv once the bracket is up, maybe even 3, but that shouldn't dissuade you from purchasing. Works like a charm. Hung a 60" samsung with this latest bracket.

. Connie, Utah

Own two and installed two for friends. Last one took 15 minutes. Very sturdy, comes with a paper template to stick to the wall. Includes a level, all hardware and complete adjustability even if you make a minor (level) error when attaching to the wall. No need to buy a more expensive unit.

W. Claudia, Florida says

This is my 2nd mounting dream mounting bracket that i have purchased. The bracket is well build, solid and easy to mount and move. The directions were concise and straight forward and everything you need is supplied except a screw driver. The mount holds my 70" 63lb visio easily, with no wobble or shaking and it moves smoothly. . I'm very pleased with this product and its design and would happily recommend them. . C. S. G.

S. Edna, Lancashire

This wall mount is great. There was step my step instructions on exactly what to do for all types of tv's. This mount came with all the hardware you need for hanging on studs or in to concrete. I recommend buying a stud finder if you don't have one already. I am using this mount to hang a 65" tv and it seems very sturdy. I was pretty scared hanging it on the wall being that large. Every time i came home for the first week, i was praying not to find it laying on the floor of my living room when i got home. But it's been about 6 months now and everything seems great still. I would highly recommend this product if your looking for a good quality and great priced tv mount. Also the swivel feature is really nice to have.

O. Meghan, Bexley says

The mount itself is good. It seems very sturdy and well built. A few things i thought people should know. The levels that come with the unit ( one sticky back one that is supposed to be attached to the mounting template and another one to check the mount as you install it) are inaccurate. I compared them to my level and both were off. So, use your own level. Second, it wasn't clear from the description but the plate that attaches to the wall is just large enough to span two 16" on center studs. If you want to place the mount exactly centered on a wall like i did the odds are pretty good that you will have to add additional bracing to your wall. Not really the fault of the mount, but but the way the studs happen to be located in my wall the choice was either mount the tv about 8" inches off center or add bracing to the wall.

L. Nancy, Darlington says

Amazing. Fairly simple to install. The only reason it got a 4 out of 5 stars was because i wasn't aware that i would need to buy a separate bracket to mount it (since the spacing of studs in my wall was greater than what the bracket in the box would provide for). I feel like they should just make that a little more well-known; i bought it, then had to wait 2 more days to install it simply because i wasn't aware of the stud spacing. Besides that, the product works amazing. Very easy to adjust screen from left to right and up/down.

E. Whiteman, Haute-Normandie

This mount seems like it will work however read carefully if your studs are not 16" apart you must purchased the extenders. We just moved into a new home and didn't realize the wall we were hanging tv on had studs at 24" apart we didn't think to check as most homes are built to 16" as a standard. So check your stud placement before you order. We had to order the extensions and the tv is still sitting in the floor. Also from a cost perspective i may have chosen another bracket based on the additional cost.

C. Jackson, Halton says

This is a nice and sturdy wall mount. This is my first ever wall mount and i don't have any reservations about hanging my 46" samsung on it. Having never put one together, and not giving it much thought prior to installation, it did take about 20 - 25 minutes to get my tv on the wall. The instructions were ok and helped when i needed it. Although not used much, i do like the option of swing my tv out and facing it in toward the dining room, and since it is up above my fireplace, i like the tilting feature as well.

P. Glenda, Australian Capital Territory

This product is fantatstic for the price. I mounted it on my patio into a brick wall. All of the mounting holes lined up well with my 42 inch bravia smart tv. The mount is extremely sturdy, and well designed. My tv is only 20 pounds, so it hold it with ease. No sagging and no issues with heavy winds we have seen with recent storms. All of my inputs were easy to access. I mounted the tv in about 30 minutes using all included hardware. If there is a knock, it is that moving the tv side to side does not provide a wide range of motion, but that is more due to the size of the tv than the mount. Perhaps if it extended farther out this issue could be resolved, but you may sacrifice stability with such a long reach. I will take the stability.

T. Lara, Medway says

Truthfully love this product. My wife was nervous because the price is so much cheaper than other mounts with similar capabilities. I assure you that the product is sound. Great workmanship, sturdy construction, simple instructions. It even comes with a template with a level you attach to it to ensure you are mounting it correctly. I was able to mount the mount to the wall by myself, and our 55" samsung tv to the mount by myself as well. (i'm 6'3" 220lbs, average body) this isn't a humble brag, just a testament to how easy the process is. . Something of note for the tv. There are an assortment of screws that come with the mount to fit most tvs. Most being key. I had to go to the hardware store to purchase the appropriate length screw to properly secure my tv to the mounting bracket. Not a big deal at all, just something to be aware of.

Y. Wilson, Arizona

Great wall mount. Fits my 55" tv well. Only bad thing i can say is the main lag screws that hold the mount to the wall had issues penetrating the sheetrock/studs of my wall. My driver could not drive them in after predrilling holes at the specified diameter. I re-drilled hole one size larger, then had to go another size larger than that. I was afraid my drill/bit were going to strip the lag screw. Not sure what was up with that, but i finally made it work without stripping the screws. Instructions were adequate. Would purchase again if i needed another mount.

A. Anonymous, Rhode Island says

This wall mount is holding up a 47" lcd tv that is very heavy. We are buying a different tv that will be lighter, but wanted to see what this could do. The lever that allows the up and down tilt action sheered off completely and i am planning to contact the manufacturer to send a replacement. This piece is required for the tv to be level and not on a tilt. We realize the tilt function is not something we need, so we're getting a different one and plan to use this unit in a room where tilt is needed. Unless your tv is super high on the wall, tilt is probably not really necessary.

Q. Dorine, Lambeth

Excellent tv wall mount. We installed it with no problems and mounted our 65" tv in minutes. They made this easy - you lift the tv & set the bracket you have installed on the tv onto the bracket on the wall mount, then you screw down two clamps. That way, i wasn't trying to hold up a 65" tv while my husband got the clamps tightened. (yeah, i've been there before). For that alone, i am very happy. I love the full motion - tilt up, down, side-to-side, plus a leveling adjustment. The side-to-side is great because i can angle it to watch while i am in the kitchen. It is very easy to move and it stays where i move it. But even better - it retracts fairly close to the wall, considering the mechanism to provide all of that flexibility. It is very strong - i can't imagine this having a problem holding up an even bigger tv securely. I have nothing negative to say about this tv mount; i will be buying this again for other tvs in the future.

F. Aldana, Tasmania says

First of all i want to that mounting dream's customer rep(michael w. ) for his amazing customer service. I bought the model 2296 which only fits if the distance between the wall studs is 16" . Somehow in my case it was in between 16" and 18" and was not able to fix the mount. I sent an email and i got immediate reply from michael and he helped me finding the right extension for the mount. This happened during christmas i was expecting my relatives coming over. When i explained my situation he immediately sent the extension with express shipping with no cost. I really appreciate the service i got from mounting dream. . The product is very sturdy and very easy to install. It comes with the wall mount template and all the necessary screws and level indicator which is really helpful.



Top tv wall mount bracket inch led Review

Disadvantage and Critical reviews

B. Tracey, Solihull says

Needed extra screws for my samsung un65ju6400. . I bought 2 different wall mounts for 2 tvs (i used this one for 65" tv and another cheaper one for 50" tv) and my 65" tv required m5 x 20 screws (not remember exact screw model). This product came with a bunch of different screw types but did not have m5 x 20 (it came with m5 x 10 but too short for my tv, anyway). Fortunately, another cheaper wall mount has m5 x 20 screws so i could install my tv with this wall mount. . Strong enough. Missing a bubble level. Blocks two of rgb ports of the un65ju6400 model (not necessary for me since i don't use them).

S. Rowe, Pennsylvania

This mounting device is stiff and it remains tilted to it full potential when one only wants a slight tilt. Doers not extend as much as i expected.

G. Mays, Sheffield says

The product seems to be solid build and instructions thorough enough. I didn't expect a lot since mounts are simple, so at least i wasn't dissappointed? for the price i am happy though and it came with levels! the hardware is labeled, a. B. C. 1. 2. 3. So on and so forth. Mine was completely missing number 5 screws, with a notice to contact if missing hardware as if it might be expected? pretty bummed on that. 3 stars for inconvenience!

C. Sarah, Aquitaine

Was very good except it will not fit 24 inch studs which the wall i had to mount it on had. I had to go purchase a stick of shallow uni-strut and mount it on that. I just ordered another from another company because of that. Also the tilt adjustment up and down needs to be re-engineered. If you know you have 16 inches between studs this will be a good option.

O. Claudia, Massachusetts says

It's ok, smaller than my other mounts and seems less sturdy, but it was also cheaper. I'm not real comfortable with the swivel. Not suggested for a nice/new 65' tv

E. Hakala, Rhode Island

The mount is very difficult to maneuver left to right, or up and down. Even pulling it in and out is quite hard.

J. Anonymous, Illinois says

This works great, however, it seems a little weak and i constantly have to readjust the leveling

K. Linda, Windsor and Maidenhead

Not universal. did not fit my lg oled tv.

Q. Rochelle, Centre says

Mount was what you paid for. Didn't work for my 60" samsung very well. Bolts were not the right size and had to offset the brackets to allow for the power cord. Also paid for next day shipping and was not delivered next day. Contacted seller and haven't heard anything about being reimbursed.

. Terry, Champagne-Ardenne

It's built well except where it rests at the top of the tv clip/mount on the tv extension arms. It moves around way too easy/much. I am worried if you use much force to adjust the tv that the top of the tv clip will bend and the tv will fall forward and off.

U. Anonymous, Quebec says

I wouldn't use this mount to hang a large tv ( 40") on a plaster/2x4 construction wall. It takes very little to make the tv wiggle while mounted. Any vibration moves the tv. I ended up hanging a 55" tv on a concrete wall and didn't have any problems, but the slightest touch moves it.

A. Williams, Kentucky

Liked this and it fits perfectly in the area i need it. The only problem i have is that it does not stay positioned straight. It constantly tilts down. The device to tighten it is being blocked by the x bracket. I will have to take off that part so i can move it past the x bracket and then re-attach it back. Hoping that will resolve my issue.

D. Hayward, New Jersey says

Holds a 48 inch tv fine but traversing is limited as a large tv hits the wall. Would i buy again? perhaps, but for a 24 inch television.

Y. Alice, Saskatchewan

It is a strong mount but the actual bracket that bolts into the 2x4 is enough to fit were the edges of the bracket are meaning there is no room to make it dead center.

T. Rebecca, Stoke-on-Trent says

Fits the hole placement of our visio 42" tv but doesn't keep it upright very well. The adjustment on the back won't lock tight enough to keep it in an upright position, it falls so is always pointing down towards ground. We are using it out on the patio so do want it slightly down to avoid the sun shining directly onto it but it is either up or down, doesn't seem to be a middle ground.

N. Suzanne, Sefton

It works as desired but the system rocks easily sideways shifting the tv out of being level. No tightening helped the issue. Simply a design flaw. Not bad but i would buy a different mount next time for sure. Slightly worried my 65" will end up falling but as long as no one touches the tv it is fine.

. Barbara, Northamptonshire says

First, this is a great heavy duty tv mount, however, it says it fits the 60" samsung but i can tell you this is inaccurate. The nobs that the screws go thru on the back of mount to connect to tv were either to large or to small, thankfully we had some out in the tool box that were perfect. Now it works perfect.

M. Palmer, Buckinghamshire

This isn't the correct picture of the mount you will receive. The tv hangs on 4 oblong tubes that you put a screw in to keep it together. If i hadn't put holes in the wall and put the other parts together it would have been returned.

X. Matherly, Georgia says

We put our 70" up with this mount. The tilt (forward/backward) will not stay locked up, keeps falling to tilt all the way down. Also, the side to side tilt will not stay locked so the tv is crooked. I'm so disappointed and wished i'd spent the extra money for a good one. I guess my boyfriend gets to say, "i told you so. " :/

Z. Carmen, New Hampshire

It's is very easy to install that's a plus . But the tv tilt very easily right and left and it's very hard to manipulate the tv . You have to use force and all the strength to do it . I hope it will loosen up little bit in time . It included all the hardware needed to mount it , which was very cool .

I. Cindy, Middlesbrough says

This will only span one stud. Included drywalll screws are crap. I got good molly bolt hangers that will hold 1000 pounds each and used 4 in addition to the stud at one side. Don't go cheap on hardware. I used the same ones i used to hang the microwave, expensive but you'll sleep at night knowing it won't fall down. The tv kept flopping forward and the adjustment screw is wimpy. I am less one drill bit. I used it to keep the angle right. The directions say to use screws. Too much of a hassle. I put it up myself, next time i will get a mount that at least will span two studs for security.

. Mathis, Prince Edward Island

Description says the item is 300x300 vesa without having to add additional hardware on. This is not true i have a 65 inch lg that is 300x300 vesa and i have to add the additional brackets on to the x bracket to install this. Not a big deal but i did buy this item since my tv was 300x300 vesa and i didnt want to mess around with adding the extra brackets on, which are confusing and time consuming.

W. Moore, Franche-Comte says

Very heavy duty , very adjustable ! one small complaint though is that even though it is solid . The fact that it adjusts for side to side and front to back angles causes it to move very easily out of adjustment if touched . Even if you tighten it well - it can still be tilted side to side . If you never touch it . It is fine . . Over all it is a pretty good product .

V. Guest, Picardie

It does the job but buyer beware this is not easy to install. It took three people, 2 hours to install the mounting hardware on the back of our samsung 65" curve. So i'm not saying it can't be done and for the price you could argue it's worth it but patience is a must.

. Margaret, New York says

Its ok. It tilts forward a little which makes me afraid its one day going to come crashing down, but we shall see.

F. Courtney, Walsall

Great product. Wont let a bigger tv go 90 degrees. I returned this product.

R. Janice, Languedoc-Roussillon says

Said it was supposed to work for my 60" tv, but does not. I can line it up with either the top holes or the bottom holes on tve tv, but not both. I followed all of the charts and guides provided on the products page to make sure it would be a perfect fit, and it should have been if the guide was to be believed. After an hour of wasted effort, i would prefer to give this product a negative number of stars.



Leave a Reply

You must be logged in to post a comment.


Back to Top

Related Products

  • Show Details
    Vonhaus Wall Mount Models Plasma (05 006)

    Vonhaus Wall Mount Models Plasma (05 006) 2236

    Bestsellers Vonhaus Wall Mount Models Plasma (05 006), Tv Wall Mount Fits Models Lcd, Led & Plasma Tv - Samsung Sony Philips Toshiba - 17 - 37.5 - Super-strength 165lbs Load Capacity Tilt This Tv Bracket Is For Wall Mounting Flat Screen Tvs Between 17 And 37. 5 Inches. It Is A Universal Tv Bracket And Designed To Fit All Major Models And Makes Of Lcd, Led And Plasma -Vonhaus Tv Wall Mount Fits Models Lcd, Led & Plasma Tv - Samsung Sony Philips Toshiba - 17 - 37.5 - Super-strength 165lbs Load Capacity Tilt Mechanism
    1. Supplementary: Cut Outs To Mount Over Plug Sockets And Ariel Plates.
    2. Supplementary: This Bracket Is Universal And Will Fit 99% Of All Makes And Models Of Tv Within The Stated Size Range (17" To 37. 5") Max Vesa Dimensions 300 X 300mm.
    3. I'm giving this wall mount 4 stars mainly because i only spent $13 on it. The instructions are not great - they completely skip the step of putting the wall bracket together, so i had to study the picture and guess how the side bars were supposed to attach. The wall anchors are meant for solid wood ... go to https://puqus.com/vonhaus-wall-mount-models-plasma-2236044y5uo4/#vonhaus-wall-mount-models-plasma
    Low-End Vonhaus Wall Mount Models Plasma (Av Furniture) 05 006
  • Free Shipping
    Perlesmith Wall Mount 55 Tvs (psmfk1)

    Perlesmith Wall Mount 55 Tvs (psmfk1) 942

    Get Price Perlesmith Wall Mount 55 Tvs (psmfk1), Tv wall mount 23 -55 tvs - wall mount tv bracket swivel & extends 16 - create perfect viewing angle - tv mount fits led, lcd, oled flat screen tvs - bonus hdmi description: the articulating full motion tv wall mount fits most 23-55 inch led lcd oled plasma tv, vesa (mounting hole patterns) 400mm x 400mm, 400mm x 300mm, 400mm x 200mm, 300mm -perlesmith tv wall mount 23 -55 tvs - wall mount tv bracket swivel & extends 16 - create perfect viewing angle - tv mount fits led, lcd, oled flat screen tvs - bonus hdmi cable
    • Nice mount with everything included! https://puqus.com/perlesmith-wall-mount-55-tvs-9421jroimm2/#perlesmith-wall-mount-55-tvs
    • Bonus: Swivel & Tilt Features: Our Full Motion Tv Wall Mount Comes With A +3 /-10 Tilt, +/-90 Swivel (max. Swivel Angle Depends On Tv Size) And +/-3 Rotation For Maximum Viewing Flexibility. Choose The Perfect Angle To View The Screen From Anywhere In The Room.
    • Bonus: Extremely Safe: This Universal Tv Wall Mount Is Tested To Hold 4 Times The Weight They're Rated To Based On Ul Standard. Our Heavy-duty Swivel Tv Mount Is Made With High Grade Steel Which Ensures Reliable Weight Loading And Makes Whole Unit Sturdy And Safe.
    Inexpensive Perlesmith Wall Mount 55 Tvs (Computer Component) Psmfk1
  • Today's Deal
    Videosecu Monitor Articulating Extension Displays (fba ml14b)

    Videosecu Monitor Articulating Extension Displays (fba ml14b) 905

    Fast Deal Videosecu Monitor Articulating Extension Displays (fba ml14b), Tv Wall Mount Monitor Bracket Full Motion Articulating Tilt Arm 15 Extension 17 19 20 22 23 24 26 27 28 29 32 37 39 Lcd Led Displays Up To Vesa 200x200 Ml14b The Swing Arm Tv Wall Mount For Led Lcd Tv Monitors, Makes It Easy To View Your Tv Or Monitor From Different Angles. Fits Tv Or Monitor Vesa 75x75(3"x3"), 100x100(4"x4"), 200x100 -Videosecu Tv Wall Mount Monitor Bracket Full Motion Articulating Tilt Arm 15 Extension 17 19 20 22 23 24 26 27 28 29 32 37 39 Lcd Led Displays Up To Vesa 200x200 Ml14b Ws2
    1. Details: Compatible With Vesa 75x75mm (3"x3") Or 100x100mm (4"x4") Without Adapters, Fit Vesa 200x200 (8 "x 8 "), 200x100mm (8 "x 4 ") With 4 Extra Plate Adapters.
    2. I have three of these. I use them for my computer workbench, cnc workbench and 3d printer/laser workbench. They get the monitor out of the way and are adjustable in a multitude of angles and extensions when you are moving around while working. The only thing i would like to have, that this does not,... go to https://puqus.com/videosecu-monitor-articulating-extension-displays-905032phz1w/#videosecu-monitor-articulating-extension-displays
    3. Details: Adjustable +/-5 Degrees Tilt; 180 Degrees Swivel And 360 Degrees Rotate. Retracts To 2. 4"save Space; Extends Up To 15" From The Wall.
    Inexpensive Videosecu Monitor Articulating Extension Displays (Av Furniture) Fba Ml14b
  • Explore more
    Mounting Dream Md2380 24 Articulating 400x400mm (Consumer Electronics)

    Mounting Dream Md2380 24 Articulating 400x400mm (Consumer Electronics) 903

    Today's Deal Mounting Dream Md2380 24 Articulating 400x400mm (Consumer Electronics), Tv Wall Mount Bracket 26-55 Inch Flat Screen Tv, Full Motion Swivel Articulating Dual Arms, Up To Vesa 400x400mm 99 Lbs Fits Stud Spacing Up To 24 Fits 16', 18', 24' Wood Stud Spacing One-piece 24' Wall Plate Can Work On Most Of Wood Stud Spacing; Easy Centering For Wood Stud Spacing Less Than 24'. Caution: This Mount Is Not -Mounting Dream Md2380-24 Tv Wall Mount Bracket 26-55 Inch Flat Screen Tv, Full Motion Swivel Articulating Dual Arms, Up To Vesa 400x400mm 99 Lbs Fits Stud Spacing Up To 24 Inch
    1. Quality: One-piece Long Wall Plate: Fits For Solid Concrete Wall/ Wood Stud Spacing Of 16', 18', 24'. Easy Centering (lateral Adjustment) With This Long Wall Plate, And Paper Template For Easy Installation. Caution: This Mount Is Not For Drywall Alone Installation!.
    2. Pretty sturdy, but ridged movement when pulling all the way out or pushing back in can be a hassle sometimes if you don't use some finesse (the cost makes it still okay). Pros-. Feels pretty sturdy. Practically any angle if your not hanging it way too high. (doesn't tilt downward too much but still ... go to https://puqus.com/mounting-dream-md2380-24-articulating-400x400mm-9036xz6s9vg/#mounting-dream-md2380-24-articulating-400x400mm
    3. Quality: Viewing Becomes More Comfortable: Tilts Tv Up 5 And Down 15 To Reduce Glare, Swivels Tv Left Or Right According To Your Seats Position. Pull Out To 15. 2 Inch And Retract Back To 3 Inch, Making Your Tv Alive To Move.
    OnSale Mounting Dream Md2380 24 Articulating 400x400mm (Consumer Electronics) Md2380 24

Product Image Gallery

Top-mounting-dream-md2296-bracket-articulating-9210ky054bg-Content