Sanus Adjustable Height Speaker Stand (fba htbs) 1983

Review for adjustable height speaker stand

Price was $39.99. These are strong, sturdy and heavy for such a small stand. Not that easy to knock over. I would recommend them. I did have an issue with the speakers i had, they needed a flat surface to sit on. No mounting holes, etc. So i had to make a couple platforms for my speakers to sit on out of some old plywood i had in the garage and painted it black. I used some velcro tape to secure the speakers to the wood and i am in business. The speaker cable runs through the speaker support tube so no unsightly wires show. The height adjustment is a great feature. You can line up the height of the speakers to your needs.

-J. Parker

Adjustable Height Speaker Stand – Extends 28 To 38 – Holds Satellite & Small Bookshelf Speakers I.e. Bose, Harmon Kardon, Polk, Jbl, Kef, Klipsch, Sony Others – Set 2 – Model: The Sanus Vuepoint Htbs Satellite Speaker Stand Is The Perfect Addition To Any Home Theater. The Stand Is Height-adjustable, So Satellite Speakers Up To 3. 5 Lbs Can Be Positioned -Sanus Adjustable Height Speaker Stand – Extends 28 To 38 – Holds Satellite & Small Bookshelf Speakers I.e. Bose, Harmon Kardon, Polk, Jbl, Kef, Klipsch, Sony Others – Set 2 – Model: Htbs

  1. Included: Height-adjustable Stand Positions Speakers At Optimum Level – 28 To 38 Inches.
  2. Included: Heavy-gauge Offset Steel Pillar Features Integrated Wire Channel.

Sale Sanus Adjustable Height Speaker Stand (Consumer Electronics) Fba Htbs

Buy Now


Foreword

I have a samsung tv sound bar with s sub woofer and surround sound rear speakers. The rear speaker model number is ps-ks1-1 (see photo). These stands come with several sizes of mounting screws, but none of them fit into the keyhole opening in the back of the rear speaker. I used the optional two-sided mounting tape method which is acceptable. Because of the size of the samsung connector on one end of the speaker wire, the wire must be fed through the base of the stand and up through the pole to the speaker. Stands are a decent weight, stable, and good quality. Best adjustable height speaker stand | Sanus-Consumer Electronics Review ( Jul 2019 ) Included Sanus Adjustable Height Speaker Stand - Extends 28" to 38" - Holds Satellite & small Bookshelf Speakers (i.e. Bose, Harmon Kardon, Polk, JBL, KEF, Klipsch, Sony and others) - Set of 2 - Model: HTBS Fits most satellite speakers up to 3. 5 lbs.. Height-adjustable stand positions speakers at optimum level - 28 to 38 inches. Heavy-gauge offset steel pillar features integrated wire channel. 5-year manufacturer's warranty. Includes top plate, l-shaped brackets and keyhole adapter .

Sanus adjustable height speaker stand - extends 28 to 38 - holds satellite & small bookshelf speakers i.e. bose, harmon kardon, polk, jbl, kef, klipsch, sony and others - set of 2 - model: htbs Review (fba htbs)

Speaker stand is very sturdy, adjustment heights are perfect, and comes with a bunch of different fitments for speakers. . Now the cons. Installing the stand was pretty straight forward but as soon as i mounted the base plate to stand, the stopping tap snapped, not a big deal because you can just make it tighter, but a bit of a let down none the less. Another thing was that there was not enough sliding pads to cover all the spots on the bottom of the stand. Most time consuming part was fishing the connections through. Overall good product, haven t had any issues so far would recommend. -I. Rhonda

Sanus Adjustable Height Speaker Stand

  • Order: Electronics
  • Brand: Sanus
  • Color: Black
  • EAN: 0885427682035
  • Product Dimensions:
    Height:7.75 inches
    Length:28.00 inches
    Weight:11.00 pounds
    Width:9.88 inches
  • Manufacturer: Sanus
  • Model: FBA HTBS
  • MPN: FBA HTBS
  • Quantity: 1
  • Part/Serial Number: FBA HTBS
  • Sub-Type: CE
  • Category: CONSUMER ELECTRONICS
  • UPC: 793795380456
  • Warranty: 5-year Manufacturer's Limited Warranty On Parts

adjustable height speaker stand - extends 28 to 38 - holds satellite & small bookshelf speakers i.e. bose, harmon kardon, polk, jbl, kef, klipsch, sony others - set 2 - model: Ce, The sanus vuepoint htbs satellite speaker stand is the perfect addition to any home theater. the stand is height-adjustable, so satellite speakers up to 3. 5 lbs can be positioned 28 in to 38 in from the floor for a customized setup. it can be assembled in minutes using just a phillips screwdriver. each heavy-gauge steel pillar is offset for optimum sound and features an integrated wire channel for easy management. includes top plate, l-shaped brackets and keyhole mount adapters to fit most small satellite speakers. comes with 5-year manufacturer's warranty speakers not included Sanus Adjustable Height Speaker Stand (FBA_HTBS-Sanus).

Sanus Adjustable Height Speaker Stand Ce

PROS
  • The product looks and feels solid and i gave it 5 stars because it will serve the purpose it was intended for. However, in my case, it will not work as i wanted since my remote speakers came with rca jacks already build in and the hole on the stand intended to run the wire thru is too small to accommodate for the width of the rca jack head. The only way would be to split the wire and run it thru the hollow stand pole. In any case, even when i attached the wires to the outside of the poles with black tight wraps still looks good.
  • I bought these to set up my wireless surround system and needed stands for the satellite speakers. The height is just right for me as they are level with the top of my couch. . I like how you can conceal the wires right inside the stand. Something to take into consideration is that the holes at the top of the stand are small enough to get speaker wires through to the bottom if you have bare wire on both ends of your speaker cable. Mine had a crimped connector on one end to connect to the wireless receiver so i had to feed it from the bottom and pull out the wire through the top. It took a while because i had to fish out the bare end with a paperclip. . The provided mounting hardware seems to work for many different kind of speakers. I used the l brackets and it works well. But the provided screw that goes into the speaker cutout in the back had a larger head than the opening. But not by much. I had to use a little force to get it in the opening. . Overall i am quite satisfied with the stand and would definitely recommend it. Just note the weight of your speakers because i believe the box said that the max weight capacity for each stand was 3. 5lbs.
CONS
  • Manufacturer has made a product that should be simple to assemble both complicated and tedious. Try peeling stick-on tape from 26 tiny (and i mean tiny) dots and then trying to stick them onto an equal number of equally small dots on teh bottoms of each stand-despite each one sticking to your fingers as you try to do it. And that's only the beginning. I'm returning it.
  • I'm frustrated with this purchase because not one of the bolts for the speakers fit the speakers that the listing said would fit. I had to upcycle a few screws from my random screw collection to make this work. I also could not get the wiring down the tube because the holes were too small for the plugs that connect to the woofer. Otherwise i would've been happy as they're a sturdy build and the perfect height to reach above the back of my couch.
  • I made it fit but i have a full set of tools. The mounting hardware won't fit as delivered in any combination. . I had to remove the mounting bracket from the speaker, drill out the bolt slot a hair, use a file to finish it off - then custom make a washer to hold the head of the bolt into the now too large slot. . As well as having the speaker facing the wrong direction from the goose neck because otherwise the speaker will not mount. . I'm going to play it and see if the mods generate excess buzzing. . I'd find an expliticty listed onkyo supported stand if i could do it over again. . -+. Also. Also, the one base had a stain on it. Brand new product that certainly appears used. A bleach wipe would not remove the stain, so i used that stand for the corner of the room where it will be out of sight

adjustable height speaker stand Sanus Adjustable Height Speaker Stand - Extends 28" to 38" - Holds Satellite & small Bookshelf Speakers (i.e. Bose, Harmon Kardon, Polk, JBL, KEF, Klipsch, Sony and others) - Set of 2 - Model: HTBS (Switch to Mobile/Desktop Version)

The stands are really sturdy and well made. The only reason i am giving it 4 stars instead of 5 is the fact that it took a long time for me to run the wire through the upper part of the stand and through the opening in the top (had to use tweezers to pull it out). It might have been a lot easier with an uninsulated speaker wire but since the one i got were insulated had to strip out huge portions in order to fit it through. But now that everything is setup i am happy with the purchase.

Sanus Adjustable Height Speaker Stand - Extends 28 To 38 - Holds Satellite & Small Bookshelf Speakers I.e. Bose, Harmon Kardon, Polk, Jbl, Kef, Klipsch, Sony Others - Set 2 - Model: Htbs
Click to see NoticeSanus Adjustable Height Speaker Stand (fba htbs)"The stands are easy to put together, sturdy, and come with different speaker mounting hardware depending on the type of speakers you have. Apparently you're supposed to feed the speaker wire from the top but because i had already connected mine to the receiver previously and the wire was too thick (12 gauge) to get through hole at the top when fed from the bottom, i just wire tied it down the back of the pole."

(0) Question: Are there a lot of pieces to put together?


(1) Question: Will they work on a sb36-1 ?


(2) Question: Will these fit the panasonic sc-ht790v or sc-ht800v surround speakers? (model no. sb-fs803a)



Featured Categories » Gold Merchants » Specialty Boutique » Sanus Adjustable Height Speaker Stand (Consumer Electronics) Fba Htbs


Samsung 54 W RMS SWA-8500S 2.0 Speaker System Wireless Speaker s Wall Mountable Black Model SWA-8500S/ZA

I just bought these at best buy for $65. They were on sale because the box was opened. Nothing touched inside. Everything works beautifully. I've read a lot of the negative comments but i really like these speakers. If they seem quiet or not putting out much sound, it's because you have to raise the level of the rear speakers on the sound bar menu. If you do, you will be pleased with the result.

Experience powerful surround sound. With the convenience of wireless and easy connectivity with samsung soundbar, the wireless rear speaker accessory kit will enhance your surround sound, taking it to the next level for more dynamic entertainment.

Samsung 54 W RMS SWA-8500S 2.0 Speaker System Wireless Speaker s Wall Mountable Black Model SWA-8500S/ZASamsung-SWA-8500S-Wireless-Mountable-ZA

Samsung Swa 8500s Wireless Mountable Za (swa 8500s za) FAQ.

I bought these to work with a samsung sound bar. They work really well, but i wish you could turn them down more and or adjust the volume per side. All in all i am happy with these and running the thin wires was cake. I was able to mount these in a sanus stand. It took a little effort but it works. -Notice from K. Cindy, Wyoming

Click to Show samsung swa 8500s wireless mountable za (swa 8500s za) Details

Great surround speakers to go with my samsung sound bar/subwoofer. Small speakers but put out great sound. Easy hookup

Samsung-swa-8500s-wireless-mountable-za-(swa-8500s-za) set picture

- J. PearsonI purchased this rear speaker module to go along with my new samsung soundbar . This module makes your soundbar a true surround system similar to the home theater in a box systems. I mounted this to my wall behind my couch and it sounds just as great as my other samsung htib system in the other room (which also uses a wireless rear module. ). . Pros:. - easy to set up, just follow the instructions to link to the samsung system, very easy. - low profile, easy to hide behind a couch or other furniture to make it out of sight. - makes your new samsung soundbar a true 5. 1 system. . Cons:. - yes the speakers themselves are wired, at this price point you are not going to find truly wireless speakers that are worth anything

Easy setup! quick shipping great sound for price.

O. Marguerite, Kirklees

SAMSUNG 54 W RMS SWA-8500S 2.0 SPEAKER SYSTEM WIRELESS SPEAKER S WALL MOUNTABLE BLACK MODEL SWA-8500S/ZA Pros
Brand :    samsung
Color :    black
Weight :    1.54 pounds
Model :    SWA-8500S/ZA
Quantity :    1
Order click here :    normally ships in 24 hours
Speakers :    Best Speakers (samsung product review) for Samsung 54 W RMS SWA-8500S 2.0 Speaker System Wireless Speaker s Wall Mountable Black Model SWA-8500S/ZA available ( Jul 2019 )
Price :    $59.75 (was $129.99)
  • Wall mountable
  • Bring wireless surround to these samsung sound+ soundbars: hw-m360, hw-m450, hw-m4500, hw-m550
  • Create an immersive surround experience to bring you into the action of your favorite movies, shows, and sports.
  • Simply plug-in and pair to enjoy all the action of your favorite entertainment in surround sound. clutter-free experience

Nakamichi Shockwafe Ultra 9.2Ch DTS:X 1000W 45-Inch Sound Bar System Dual 10 Wireless Subwoofers & Four 2-Way Rear Satellite Speakers

Components 9. 2-channel surround soundbar with dts:x, dolby audio and neural:x upmixing technology the duet: signature dual 10Ó wireless subwoofers with bass as low as 30hz the quartet: four 3s (synchronized surround sound) high performance 2-way rear surround speakers 18 speaker drivers (8 in soundbar, 8 in rear surrounds + 2 subwoofers) 45Ó sound bar with built-in exclusive surround effects tweeters 52-key backlit remote performance quad-core cirrus logic digital signal surround processor 1000 watts of power: sound bar 330w; subwoofers 470w; two-way 3s rear speakers 200w 110db of cinema-quality surround sound connectivity bluetooth with aptx hdmi arc; hdmi 2. 0; 4k pass thru; hdcp 2. 2; hdr advanced connectivity: 1 x hdmi arc; 3 x hdmi 4k; 1 x optical; 1 x coaxial; 1 usb; 1 aux dimensions & weight soundbar: 45. 5 (l) x 3. 3 (w) x 3. 0 (h) inches, 7. 27 lbs subwoofer: 13 (l) x 11 (w) x 25. 6 (h) inches, 25. 6 lbs (each) rear speaker: 5. 0 (l) x 5. 4 (w) x 8 (h) inches, 2. 8 lbs (each)

Nakamichi Shockwafe Ultra 9.2Ch DTS:X 1000W 45-Inch Sound Bar System Dual 10 Wireless Subwoofers & Four 2-Way Rear Satellite SpeakersNakamichi-Shockwafe-Ultra-9-2Ch-DTS

NAKAMICHI SHOCKWAFE ULTRA 9.2CH DTS:X 1000W 45-INCH SOUND BAR SYSTEM DUAL 10 WIRELESS SUBWOOFERS & FOUR 2-WAY REAR SATELLITE SPEAKERS Summary
Brand :    nakamichi
Color :    Black
Size :    Ultra 9.2 DTS-X
Weight :    23.85 pounds
Model :    SHOCKWAFE ULTRA 9.2 DTS:X
Quantity :    1
Order click here :    normally ships in 24 hours
  • Shockwafe ultra 9. 2 dtsx - review rating 4. 8 stars (as of 9/27/2018). 1 rated surround soundbar based on all branded soundbars on . transform your living room into a state-of-the-art cinematic auditorium. our 9 discrete channels, dual 10" wireless subwoofers and four 2-way surround speakers make it the industry's only soundbar that delivers 360-degree 3d surround sound. winner of the best high end soundbar battle at ces 2018, be prepared to be completely blown away.
  • The main soundbar unit features upgraded high-performance speaker drivers, including our signature front surround effects tweeters that deliver a 35% wider soundstage. the embedded quad-core cirrus logic chipset handles demanding high-resolution soundtracks effortlessly, allowing support for dts:x object-based and neural:x upmixing surround technologies. get ready to be blown away by 1000 watts of room-filling sound as loud as 110db.
  • Our dual 10" wireless subwoofers (industry's first! ), the new soundbar reference standard for bass, produce ground-shaking rumbles that turn your living room into an epicenter of adrenaline-pumping action. they merge to distribute the sonic boom evenly throughout the room with zero localization. unleash cinema-level volumes without a trace of distortion, replicating the perfect cinema experience. agreed among experts, two subwoofers are a must for ultimate home theaters.
  • Four 2-way surround speakers (industry's first! ). each of them is constructed with a tweeter that reproduces high frequencies with captivating clarity, and a full-range driver that delivers surround effects with power and precision. modular in form (industry's first! ), they can be attached as dipoles to disperse surround effects to expanded listening sweet spots or detached as 4 individual speakers to deliver ultra 9. 2's signature 360-degree surround sound to any room shape or size.
  • Enjoy advanced connectivity with support for the latest video standards including 4k uhd pass-through, high dynamic range (hdr), hdcp 2. 2 and hdmi audio return channel (arc). connect up to 6 devices via 1 hdmi arc, 3 hdmi (v2. 0), 1 optical and 1 coaxial inputs. the full-feature 52-key backlit remote allows seamless control of source inputs, dsp settings, individual channel volume, dts:x dialog, and room size optimization. bluetooth aptx delivers wired quality sound - wirelessly.
Price :    $949.38 (was $1099.99)
Ce :    Best Home Theater System Or Htib (Ce product review) for Nakamichi Shockwafe Ultra 9.2Ch DTS:X 1000W 45-Inch Sound Bar System Dual 10 Wireless Subwoofers & Four 2-Way Rear Satellite Speakers available ( Jul 2019 )

Sony Sound Bar Speaker HT-Z9F: 3.1ch Dolby Atmos / DTS:X TV Soundbar WiFi & Bluetooth Technology Virtual Surround Sound - Wall Mountable Home Theater System TVs Wireless Subwoofer

Feel the thrill of your favorite shows and movies. The z9f 3. 1ch dolby atmos/dts:x sound bar's new vertical surround engine places you in the middle of the action. Five different sound modes optimize audio to what you re hearing. Wireless and network-capable, the z9f can also connect to select rear speakers for a full-room solution that provides a cinematic experience.

Sony Sound Bar Speaker HT-Z9F: 3.1ch Dolby Atmos / DTS:X TV Soundbar WiFi & Bluetooth Technology Virtual Surround Sound - Wall Mountable Home Theater System TVs Wireless SubwooferSony-Sound-Bar-Speaker-HT-Z9F

SONY SOUND BAR SPEAKER HT-Z9F: 3.1CH DOLBY ATMOS / DTS:X TV SOUNDBAR WIFI & BLUETOOTH TECHNOLOGY VIRTUAL SURROUND SOUND - WALL MOUNTABLE HOME THEATER SYSTEM TVS WIRELESS SUBWOOFER Benefit
Brand :    sony
Color :    Black
Weight :    31.90 pounds
Model :    HTZ9F
Quantity :    1
Order click here :    normally ships in 24 hours
Ce :    Best Home Theater System Or Htib (sony product review) for Sony Sound Bar Speaker HT-Z9F: 3.1ch Dolby Atmos / DTS:X TV Soundbar WiFi & Bluetooth Technology Virtual Surround Sound - Wall Mountable Home Theater System TVs Wireless Subwoofer available ( Jul 2019 )
Price :    $522.77 (was $898.00)
  • Easy connectivity: connect via hdmi / arc, optical or analog / stereo mini input cables or via usb
  • 4k compatible: a 4k hdr 18 gbps pass-through preserves the clear, crisp sounds of 4k entertainment
  • Wireless streaming: stream hi-res audio with the systems chromecast or use the sony music center app
  • 5 sound modes: customize your television viewing with movie, music, gaming, news and sport settings
  • Superior sound: vertical surround engine with max 7. 1. 2ch sound creates a truly immersive experience

VIZIO SB3651-E6B 5.1 Soundbar Home Speaker, Black Manufacturer Certified Refurbished

Introducing the all-new vizio smart cast 36 5. 1 wireless sound bar system. Redefine your home theater experience with full 5. 1 surround sound. With chromecast built-in, use your phone to stream music from any chromecast-enabled audio app, like iheartradio, google play music, pandora, spotify and more. Download the free vizio smart cast app and turn your mobile device into a powerful remote. Works with google assistant on devices like google home. Control your vizio smart cast sound bar using just your voice! connect multiple vizio smart cast sound bars or speakers over wi-fi and control them using the vizio smart cast app from anywhere in the house. Chromecast, google play and google home are trademarks of google inc. Download of vizio smart cast app required on a mobile device with ios 9. 0+ or android 4. 4+. The applications and content of the applications pictured or described herein may only be available in certain countries or languages, may require additional fees or subscription charges, and may be subject to future updates, modifications or discontinuation without notice. Vizio has no control over third party applications or content and assumes no responsibility for the availability or interruption of such applications or content. Additional third party terms, conditions, and restrictions apply. High-speed/ broadband internet service and access equipment are required and are not provided by vizio. Third party account required to download apps to your mobile device. Spotify premium account required. Additional supported smart cast or chromecast-enabled audio products are required (not included) for multi-room feature. Streaming different songs to different speakers at the same time is not supported when using a single app running on a single mobile device. To stream a different song to different speakers at the same time, you ll need to stream from a different app or a separate mobile device.

VIZIO SB3651-E6B 5.1 Soundbar Home Speaker, Black Manufacturer Certified RefurbishedVIZIO-SB3651-E6B-Manufacturer-Certified-Refurbished

VIZIO SB3651-E6B 5.1 SOUNDBAR HOME SPEAKER, BLACK MANUFACTURER CERTIFIED REFURBISHED Overview
Price :    $179.99
  • Enjoy 101 db of true surround sound with the included wireless subwoofer and rear satellite speakers
  • A certified refurbished product has been tested and certified to work and look like new, with minimal to no signs of wear by manufacturer. all products are backed by a manufacturer's 90 day warranty.
  • Download the vizio smart cast app and turn your mobile device into a powerful remote
  • Stream music from any chromecast-enabled audio app over wi-fi with no interruptions
Brand :    vizio
Color :    Black
Weight :    13.62 pounds
Model :    SB3651-E6B
Quantity :    1
Order click here :    normally ships in 24 hours
Home Theater :    Best Home Theater System Or Htib (vizio product review) for VIZIO SB3651-E6B 5.1 Soundbar Home Speaker, Black Manufacturer Certified Refurbished available ( Jul 2019 )

Mounting Dream MD5401 Height Adjustable Speaker Stands Mounts, Two in One Floor Stands, Heavy Duty Base ExtendableTube 11 LBS Capacity Per Stand, 35.5-48 Height Adjustment

Holds speaker up to 11 lbs heavy duty cast iron for durability and stability, supports speaker up to 11 lbs/5kg per stand. Heavy gauge steel in black finish. Floor standing and extendable tube from 35. 5 to 48 floor standing design features with strong triangle shape base. Extendable tube is adjustable from 35. 5 to 48 depending on listening area for surround sound multiple speaker attachment options 4 attachment options are available for different speakers. Adjustable height attachment design for vertical hole and key hole, adapter bar for horizontal holes, and round holder for wooden speaker without hole cable management solution cable ties provides cable solution for a neat appearance. Check and measure your speaker to ensure speaker compatibility highly recommend checking speaker holes location before purchase. Please refer to the pictures at left side for attachment options and speaker hole distance requirement.

Mounting Dream MD5401 Height Adjustable Speaker Stands Mounts, Two in One Floor Stands, Heavy Duty Base ExtendableTube 11 LBS Capacity Per Stand, 35.5-48 Height AdjustmentMounting-Dream-MD5401-Adjustable-ExtendableTube

MOUNTING DREAM MD5401 HEIGHT ADJUSTABLE SPEAKER STANDS MOUNTS, TWO IN ONE FLOOR STANDS, HEAVY DUTY BASE EXTENDABLETUBE 11 LBS CAPACITY PER STAND, 35.5-48 HEIGHT ADJUSTMENT Advantage
Price :    $26.24 (was $34.99)
  • Floor-standing design features with heavy gauge triangle shape base. extendable tube is adjustable from 35. 5" to 48" for optimum acoustics.
  • Cable ties included in packaged to help run the cable around the stand tube.
  • Heavy duty cast iron for durability and stability, supports weight up to 11lbs/5kg per stand with black finished steel.
  • Check speaker compatibility: highly recommend checking speaker holes location before purchase. please refer to picture lists' attachment options and speaker hole distance requirement.
  • Multiple attachment options are available for different speakers: adjustable height attachment design for vertical hole/key hole, adapter bar for horizontal holes, and round holder for wooden speaker without hole
Brand :    mounting dream
Size :    Height Adjustable Speaker Stand
Weight :    12.52 pounds
Model :    MD5401
Quantity :    1
Order click here :    normally ships in 24 hours
Ce :    Best Ce Accessory (mounting dream product review) for Mounting Dream MD5401 Height Adjustable Speaker Stands Mounts, Two in One Floor Stands, Heavy Duty Base ExtendableTube 11 LBS Capacity Per Stand, 35.5-48 Height Adjustment available ( Jul 2019 )

Yamaha YHT-4930UBL 5.1-Channel Home Theater in a Box System Bluetooth

Yamaha yht-4930ubl 5. 1-channel home theater in a box system with bluetooth

Yamaha YHT-4930UBL 5.1-Channel Home Theater in a Box System BluetoothYamaha-YHT-4930UBL-5-1-Channel-Theater-Bluetooth

YAMAHA YHT-4930UBL 5.1-CHANNEL HOME THEATER IN A BOX SYSTEM BLUETOOTH Featured
Brand :    yamaha audio
Color :    Black
Weight :    16.30 pounds
Model :    YHT-4930UBL
Quantity :    1
Order click here :    normally ships in 24 hours
  • Ypao sound optimization for automatic speaker set up
  • 5. 1-channel compact black gloss speaker package
  • 4k ultra hd pass-through with hdcp 2. 2 support. rated output power (1khz, 1ch driven) : 100 w (8 ohms, 0. 9 percentage thd)
  • Bluetooth for wireless music streaming with compressed music enhancer
  • 6-1/2" 100 watt powered subwoofer
Price :    $379.77 (was $389.95)
Receiver Or Amplifier :    Best Receiver Or Amplifier (yamaha audio product review) for Yamaha YHT-4930UBL 5.1-Channel Home Theater in a Box System Bluetooth available ( Jul 2019 )

VIZIO SB4451-C0 SmartCast 44 5.1 Sound Bar System

Introducing the all-new vizio smartcast 44 5. 1 sound bar system. The included wireless subwoofer and rear satellite speakers deliver fully immersive 5. 1 true surround sound at levels up to 103 db1. Download the vizio smartcast app2 to turn your mobile device into the ultimate remote and discover music across multiple apps at once. With google cast built-in, you can cast your favorite tunes from 100+ audio apps you already know and love to your sound bar. Connect multiple vizio smartcast sound bars or speakers together to cast the same or different music to any or every room.

VIZIO SB4451-C0 SmartCast 44 5.1 Sound Bar SystemVIZIO-SB4451-C0-SmartCast-Sound-System

VIZIO SB4451-C0 SMARTCAST 44 5.1 SOUND BAR SYSTEM Summary
Price :    $350.51 (was $399.99)
  • Wall mountable: yes; remote included: yes
  • Subwoofer: wireless. system frequency response l&r: 90 hz - 20 khz / center: 160 hz - 20 khz, subwoofer frequency response: 40 hz - 90 hz, satellite speaker frequency: 170 hz - 20 khz, system frequency: 40 hz - 20 khz
  • Inputs: 1 analog, 1 digital. 1 optical, 1 usb, 1 hdmi, 1, wi-fi, 1 ethernet
  • Connectivity: wi-fi and bluetooth
  • 44" 5. 1 channels-ideal for 42" and larger tvs
Brand :    vizio
Color :    Black
Weight :    10.80 pounds
Model :    SB4451-C0
Quantity :    1
Order click here :    normally ships in 24 hours
Speakers :    Best Speakers (vizio product review) for VIZIO SB4451-C0 SmartCast 44 5.1 Sound Bar System available ( Jul 2019 )

Sony Z9R Wireless Speaker Z9F Sound bar SA-Z9R

Experience cinematic surround sound with dedicated wireless rear speakers for ht-z9f. Take movies, shows, sports, and music to the next level with these wall-mountable rear speakers by pairing them with your sony ht-z9f soundbar. Crystal clear, room-filling sound is packed into two sleek, discreet speakers that blend seamlessly into any home theater environment.

Sony Z9R Wireless Speaker Z9F Sound bar SA-Z9RSony-Wireless-Speaker-Sound-SA-Z9R

SONY Z9R WIRELESS SPEAKER Z9F SOUND BAR SA-Z9R Features
Price :    $199.99 (was $298.00)
  • Direct wireless connection with the ht-z9f sound bar.
  • Dedicated wireless rear speakers for use with the ht-z9f sound bar.
  • Quick and easy setup
  • Wall mount capable
Brand :    sony
Color :    Black
Weight :    4.65 pounds
Model :    SAZ9R
Quantity :    1
Order click here :    normally ships in 24 hours
Ce :    Best Portable Audio (sony product review) for Sony Z9R Wireless Speaker Z9F Sound bar SA-Z9R available ( Jul 2019 )

VideoSecu 2 Heavy duty PA DJ Club Adjustable Height Satellite Speaker Stand Mount - Extends 26.5 to 47 i.e. Bose, Harmon Kardon, Polk, JBL, KEF, Klipsch, Sony, Yamaha, Pioneer others 1B7

Designed to accommodate satellite surround loudspeakers from most major manufacturers. Adjustable height for personal preference. Unsightly cables concealed via central hole in the provided brackets. Universal compatibility with the majority of leading brands of surround loudspeakers, including acoustic energy, sony, bose and many others. Notice: speakers not included.

VideoSecu 2 Heavy duty PA DJ Club Adjustable Height Satellite Speaker Stand Mount - Extends 26.5 to 47 i.e. Bose, Harmon Kardon, Polk, JBL, KEF, Klipsch, Sony, Yamaha, Pioneer others 1B7VideoSecu-Adjustable-Height-Satellite-Speaker

VIDEOSECU 2 HEAVY DUTY PA DJ CLUB ADJUSTABLE HEIGHT SATELLITE SPEAKER STAND MOUNT - EXTENDS 26.5 TO 47 I.E. BOSE, HARMON KARDON, POLK, JBL, KEF, KLIPSCH, SONY, YAMAHA, PIONEER OTHERS 1B7 Review
Price :    $39.89
  • Stylish - black finish steel support weight up to 30 lbs for stereo or surround sound
  • Adjustable screw-in rubber feet keep unit level on carpet or hard floor; concealed wire management, stability ensured
  • The top plate can pan 180 degrees and tilt +/-10 degrees for level adjustment
  • Side clamping top plate can adjust width from 5. 5 to 11 inches (140mm-279mm)
  • Height adjustable from 26. 5 inch to 47 inch (673mm - 1193mm)
Brand :    videosecu
Color :    Black
Weight :    11.00 pounds
Model :    MS07B
Quantity :    1
Order click here :    normally ships in 24 hours
Ce :    Best Cable Or Adapter (videosecu product review) for VideoSecu 2 Heavy duty PA DJ Club Adjustable Height Satellite Speaker Stand Mount - Extends 26.5 to 47 i.e. Bose, Harmon Kardon, Polk, JBL, KEF, Klipsch, Sony, Yamaha, Pioneer others 1B7 available ( Jul 2019 )

Monoprice Satellite Speaker Floor Stand Set of 2 , Black

First off, these stands are very sturdy. They are almost entirely metal and have significant weight to them. The speakers attach easily and are supported well. The bases are wide and accommodate the weight of the speaker nicely. Possibly the best feature is the ability to hide the speaker wires inside of the stands. It makes for a very neat appearance. . The minor flaws i mentioned are: 1. ) i ordered two sets of stands. In each set, only one of the bases was labeled "monoprice". Luckily, with two sets (four stands total) i had two pair, one with the label and one without. My ocd was pleased at this fact. Issue 2. ) the fact that there are no holes drilled into the stand for which the screw to enter when mounting the speaker assembly. The screw just provides oppositional tension between the plastic piece and the metal pole. . All in all, i'm very happy with these speaker stands. Great buy.

Many small satellite speakers have ports on the back, which are designed to improve the bass response. For best sound response, it is usually recommended to mount these speakers about 1-2 feet away from the wall, to allow the ports to work properly. This speaker floor stand set is designed to let you mount your satellite speakers in an ideal location, away from a wall. The stands are height adjustable from about 26. 8" to 43. 3", allowing you to mount the speakers at your ear height when sitting. They can hold speakers weighing up to 5 lbs each. The brackets mount onto speakers with a standard 1/4" x 20 mounting screw or via a keyhole mount. The stand tubes are hollow so that the speaker wires can be hidden within.

Monoprice Satellite Speaker Floor Stand Set of 2 , BlackMonoprice-Satellite-Speaker-Floor-Stand

Monoprice Satellite Speaker Floor Stand Set 2 , Black (103022) FAQ.

These work very well for those who are on a budget and have relatively small satellite speakers. They stand solid to the ground and perform as well as they should. My only gripe was with the holes drilled in the side of the shafts for feeding the wires through. I appears with some of my stands they got careless and allowed the drilled metal to fold inside the shaft (without removing it), which blocked the wires as i was attempting to feed them through the tube. I had to get some tools to pick out the excess to be able to do it properly. Otherwise, they appear to be doing a great job of keeping my satellite speakers mounted off the ground at the correct height. -Notice from . Gina, City of Kingston upon Hull

Click to Show monoprice satellite speaker floor stand set 2 , black (103022) Details

Bought two sets. Three or if the four we fine. One was kidding a part to lock the arm at your desired height. Disappointing.

Monoprice-satellite-speaker-floor-stand-set-2-,-black-(103022) set picture

- R. BentonWorks good for my panasonic rear speakers. I wish the bases where just a little bit bigger so it would be a bit more stable on my carpet, but other than that they work. Just like other reviewers be careful on how tight you twist the plastic pole adjustments. Very cheap plastic.

Need to watch what type of speakers you have and how they connect. Was not the best connection for my type of speckers but i mde it work.

P. Claudia, Stockton-on-Tees

MONOPRICE SATELLITE SPEAKER FLOOR STAND SET OF 2 , BLACK Pros
Brand :    monoprice
Color :    Black
Weight :    1.00 pounds
  • Black painted finish
  • Floor-standing design lets you put speakers in the best position for sound quality
  • Mount speakers using 1/4-inch x 20 mounting screw or keyhole mount
  • 5 lb. weight capacity per stand
  • Adjustable from 26. 8-inch to 43. 3-inch height
Price :    $19.12 (was $24.99)
Model :    103022
Quantity :    1
Order click here :    normally ships in 24 hours
Speakers :    Best Av Furniture (Speakers product review) for Monoprice Satellite Speaker Floor Stand Set of 2 , Black available ( Jul 2019 )

Atlantic Satellite 77305018 2 Speaker Stands, Black, 2 Stands Per Pack

Height adjustable from 27" to 48"concealed wire path in support pole and baseheavy-duty cast metal black matte finishblack matte finish

Atlantic Satellite 77305018 2 Speaker Stands, Black, 2 Stands Per PackAtlantic-Satellite-77305018-Speaker-Stands

ATLANTIC SATELLITE 77305018 2 SPEAKER STANDS, BLACK, 2 STANDS PER PACK Pros
Brand :    atlantic
Color :    Black
Weight :    24..3 pounds
Model :    77305018
Quantity :    1
Order click here :    normally ships in 24 hours
  • Pair of adjustable speaker stands for satellite or surround sound speakers
  • Place your speakers at optimal height for stereo or surround sound. durable cast-iron construction with black finish holds up to two pound speakers
  • Unit dimensions (in inches) : length - 11. 88", left to right measurement width - 10. 88" , front to back measurement height - 49. 25" , bottom to top measurement weight - 5. 00 lbs
  • Fits most satellite speakers up to 5 lbs.
  • Adjustable from 27 to 48 inches, depending on listening area. support pole and base conceal speaker cables out of sight
Price :    $19.99 (was $40.66)
Speakers :    Best Av Furniture (atlantic product review) for Atlantic Satellite 77305018 2 Speaker Stands, Black, 2 Stands Per Pack available ( Jul 2019 )

sanus adjustable height speaker stand - extends 28 to 38 - holds satellite & small bookshelf speakers i.e. bose, harmon kardon, polk, jbl, kef, klipsch, sony and others - set of 2 - model: htbs Price : 28, was : 39 as 2018-11-02
USUKDEFRESITJPCNCAGlobal
United States
Great Britain
German
France
Spain
Italy
Japan
China
Canada
World Wide
Sanus Adjustable Height Speaker Stand (fba htbs) Reviewed by on puqus.com

Top sanus adjustable height speaker stand (fba htbs) Content

The F.A.Q. for sanus adjustable height speaker stand - extends 28 to 38 - holds satellite & small bookshelf speakers i.e. bose, harmon kardon, polk, jbl, kef, klipsch, sony and others - set of 2 - model: htbs

Based on many reviews i knew these wouldn't fit the wires from my vizier 5. 1 sound bar with rear speakers. I couldn't really find any system that did though. So, i bought these and mad it work by removing the rubber lining from the end of the speaker plugs, straightening the upper arm that has curves in it, cutting a larger opening where the wires typically come out of the upper arm, and using a metal coat hanger to push the plug through. It wasnt without its difficulties, but the end result is much cleaner than before. Bottom line, if your handy, you can make these work. The overall build quality seems good. Heavy, stays put on carpet. Black powder coat is nice. Come with many types of hardware for different applications.

A number of questions have been asked here.

Showing 20 Q&A on Sanus-Adjustable-Height-Speaker-Stand

(0) Question: Will this work with harman kardon hkts 30 rear speakers? thanks!


(1) Question: Will this fit a sonos play:1?


(2) Question: Will these work for bose 321 gs systems?


(3) Question: Will these work with bose cinemate 2 speakers?


(4) Question: Musiccast 10 will these work for such speakers


(5) Question: What is the size of the base plate that rests on floor?


(6) Question: Will these work with the vizio sb4051-d5 speakers.


(7) Question: Does it work with the visio sb3651-e6


(8) Question: I am trying to look for some speaker stands for my home theater in a box will these stands work with my rear satellite speakers?


(9) Question: Will these work with onkyo sk4800 surround speaker with only key hole option ?


(10) Question: Will these work with onkyo ht-s3800 satelite speakers?


(11) Question: Will these stands work with polk rm85 series speakers? rm85 series speakers have a screw hole at the bottom of the speaker?


(12) Question: Will the acoustimass 10 series v home theater speaker system surround speakers work on this stand


(13) Question: Will these work with the vizio sb3851-d0 satellite speakers?


(14) Question: What is the max weight of speaker this can hold? i have a pair of bose 501.


(15) Question: Did anyone tryed this with klipsch quintet? will it fit?


(16) Question: Will this stand be used for vizio satellite speakers?



(note) Question: where/how to get Sanus (manufacturer's brand) accessories & similiar Sanus's products

Click to Show/Hide the Answer
Answer:

Click on the marked text to copy to Clipboard

Please mark this as helpful, especially for vizio people, people complained about the wire pressing against the metal rod(stand), and they are correct, and here's a solution: as my photos show, by rotating the bracket and not installing it as instructed, you can create plenty of room for the wire, and it seems to still be very well balanced. First assemble the rods attached to the base correctly as instructed, then screw the speaker to the bracket like in my photo instead of screwing the bracket to the stand, then the last thing is to attached the bracket to the vertical stand. Screwing the speaker to the bracket first will allow you to use a screwdriver and make it tight, before attaching the bracket to the stand, because the stand blocks access to tighten the speakers screw. So screw bracket to speaker securely.


Bestsellers, Consumer ElectronicsTop Sanus Adjustable Height Speaker Stand (fba htbs) FAQ Content

Best sanus adjustable height speaker stand (fba htbs) in review

Amazing product and quality for the price . I have four bose surround sound speakers and the original stands have fallen apart . I went searching for new ones and found online store sells them at 120 dollars a pair . In my case i d have to buy 2 . (240. 00 dollars ) . I was all set to bite the bullet and buy them when online store sugestions popped up with these ones . Well i m glad i bought these . A quarter of the price and the quality is amazing . All of my bose speakers screwed right to them and i think look better than the bose stands . Some assembly required of course but if you have half a brain like me it s easy . Hint run the wire through the tube before you put the two half s together . Then to pull the wire out the little hole make sure you steal your wife s best grippy tweezers to grab it and pull it through . Then if your like me order new tweezers for the wife quickly as i bent hers during the process .

N. Lorenz, Solihull

You might like to see Home Cinema 2045 1080p 3d Miracast 3lcd Home Theater The Home Cinema 2045 Wireless Projector Is Designed To Be Your Home Entertainment Hub, Delivering Full Hd 1080p Content From An Array Of Devices. Offering Up To 3x Higher Color Brightness -Epson Home Cinema 2045 1080p 3d Miracast 3lcd Home Theater Projector
  1. Featured: Color Brightness: 2200 Lumens, White Brightness: 2200 Lumens.
  2. Featured: Full Hd 1080p, Widescreen, 3d Performance - For Movies, Games And More, Up To 300" On Virtually Any Wall Or Screen.
Affordable Epson Home Cinema 2045 1080p 3d Miracast 3lcd Home Theater Projector (Video Device) V11h709020 Epson Home Cinema 2045 1080p 3d Miracast 3lcd Home Theater Projector
Or you might like to consider Height adjustable speaker stands mounts, two in one floor stands, heavy duty base extendabletube 11 lbs capacity per stand, 35.5-48 height holds speaker up to 11 lbs heavy duty cast iron for durability and stability, supports speaker up to 11 lbs/5kg per stand. heavy gauge steel in black finish. floor standing and extendable -mounting dream md5401 height adjustable speaker stands mounts, two in one floor stands, heavy duty base extendabletube 11 lbs capacity per stand, 35.5-48 height adjustment
  • Feature: Floor-standing Design Features With Heavy Gauge Triangle Shape Base. Extendable Tube Is Adjustable From 35. 5" To 48" For Optimum Acoustics.
  • Feature: Multiple Attachment Options Are Available For Different Speakers: Adjustable Height Attachment Design For Vertical Hole/key Hole, Adapter Bar For Horizontal Holes, And Round Holder For Wooden Speaker Without Hole.
OnSale Mounting Dream Md5401 Adjustable Extendabletube (Ce Accessory) Md5401 Mounting Dream Md5401 Adjustable Extendabletube (Ce

U. Joanna, Midi-Pyrenees says

Stands are what i expected. Easy to assemble. Bases have some nice weight to them. Multiple mounting options. My only design complaint would be that routing the speaker wires through the stand tubes is very limited. If your speaker wires are light gauge and have no plugs on the end you'll be fine. But if your cables have rca or other plugs on the end they will not work and have to dangle outside or be ziptied to the stand. Bigger tubing and a larger access hole would fix this issue.

H. Laura, New Brunswick

For the price these are pretty good. The worst part is the unclear assembly instructions. I have said in other reviews that the majority of other's bad reviews are due to user error. Which i think is the case with these. It took a lot longer than expected to hook up, what i thought would be a 5 minute thing. The confusing instructions, paired with having to seemingly do everything the backwards way and long way to get them to work. But, after a lot longer time than anticipated, they are done and i love them. If you have speakers in which the only way to attach them is to utilize the "hanging" way (meaning there is a larger screw hole to insert into the back of the speaker that slides down to hole them, the part that acts as the screw is a little larger on the head. I had to smash mine in. Next, one of the poles did not go all the way down in the base. I got mine after backing it out and back in several times, to only sit about 1/3 of an inch above the base so it is hardly noticeable. Last tip, when adjusting the height, it isn't like a shower rod where you just twist a few times. You have to continue to twist until it threads all the way down.

V. Suzanne, Baden-Wuerttemberg says

After assembly is completed, it looks good and it feels solid. I would definitely buy it again and recommend it. . The product shortcomings are:. 1. The hole the speakers cable go through is extremely tight. I needed to pass gauge 14 cables through and it was a struggle. 2. The "feet" are 10 tiny sticker for each stand. The stickers were hard to peel off and many of them have already fallen off after a weeks use. 3. None of the screws that came in the box worked to hold my speakers in place. It forced me to improvise. . All these issues were related to setting it up. Now that i was able to overcome the setup phase, all's well.

F. Denise, Hawaii

Needed something to sit my vizio sb-4551 (2016 model) rear surround on. Found this set on online store and it was a good price compared to some over the other one's i saw that were 2-3x as much. Set up was easy and it looks good in the corners of my room. . Minus one star for 2 reasons:. . 1. The hole in the pole is too small to snake the speaker wires through due to vizio using rca plugs on both end of the surround wire. Would be nice if they were bigger to accommodate the rca inputs but they would have had to make the pipes bigger just to accomodate it. Deal breaker? no. I just ended up using some clear tape, running the wire behind the pole and taping around the pole in 3-4 points. Worked great to keep the wire hidden and not just dangling off to the side. . 2. The stands come with felt stickers that you need to peel and place on the bottom plate if you want a little cushioning between the metal plate and floor surface. The felt wasn't all that thick and each plate had about 10 spots to put the little round felt pieces on. Big deal? not really but still worth mentioning. Didn't need to put them on since i have it on carpet but i still put them on anyway. . Overall i recommend these stands if you're looking for a cheap and attractive solution for your rear surround speakers.

O. Mathis, Saarland says

When wall mounting is not an option i ordered 2 sets of the sanus speaker stands. Got a satellite speakers that still sounds good and fits with the speaker stand. I had to add washers to secure the ar720's on to the provided l brackets. . To make your speaker wire installation much easier is the pass the speaker wires through the holes first before securing/screwing in your speakers. This will reduce time and frustration with snaking the speaker cables out. . Great customer service, one of the poles would not let my 16 gauge speaker cables pass and would start to strip/scratch the protective shielding. They sent a replacement pole very quickly! . . I would definitely recommend this speaker stand!

K. Janice, Iowa

Stands are great. I bought them not knowing exactly what they would be like and was pleasantly surprised with them. They are much heavier than anticipated (which i was concerned about) so i have no worries about the stand falling over if bumped. The only difficult part was threading the speaker wire through and out the small hole in the back. I ran a ribbon through the small hole and out the bottom, tied it around the wire then pushed the wire through and used the ribbon to just navigate getting it out the small hole on the side near the top. Great speaker stands though. Definitely recommend.

B. Anonymous, Delaware says

I used these to vertically mount bose 161 speakers as front surround speakers matched to a bose vcs-10. This is a pretty seamless setup as they use the same drivers in all speakers. Good sound without spending a fortune. The sanus stands fit these well. They are good quality and come with a variety of mounting bracket options. Only 2 things that keep me from giving 5 stars. I'm very picky about setup and locking everything in precise location. As much as you tighten these, they can still allow twisting. But more importantly for me is that it was hard work getting them to accept the 16 gauge speaker wire i use. You could argue that it's overkill but i tend to go with larger gauge wire just to be sure it's the best quality sound i can get. I was able to get them to work but had to open up the upper wire hole in the stand and add some grease to the wire to get it to snake through the tight tube. Overall a great product for the money, good looking and functional. Highly recommended but be aware of the wire size limit. 18 gauge and higher should be no issue at all.

M. Gilmore, Bayern

Bought a set of these for some klipch satellite rear speakers a while back and they work beautifully. Just bought another set to replace a busted bose stand for some cube rear speakers in another room and they again work great. The wire hides nicely inside the stand and they are pretty solid build quality. The bose stands look nice. Especially the way they hide the hardware and wire behind the speaker, but they are kind of flimsy. With two little kids running around i knew they wouldn't last forever. . These sanus stands should better withstand an occasional bump. Also the height adjustment is great. They're able to adjust higher which brings the speakers over the back of my couch better. They look great and are less than half the cost of the bose stands. I have all the sets i need but would buy again.

C. Neva, South Dakota says

I had a need for two stands for surrounds in a 7. 1 setup and chose these due to their features and positive review. They turned out to be perfect for monoprice 108247 5. 1-channel home theater speaker system, six satellite speakers thanks to the variety of metal connecting plates including base plates for bottom mounts. Rubber pads are provided for those specific plates with adhesive on both sides though i opted not to use the top side in case adjusting was needed. However, the included screw for attaching the plate to the speaker was too long for the monoprice 8247 sockets so i used their finger tightened screw from brackets included in that set. . Assembly is straight forward with good instructions and they are very well balanced even when fully extended. So far they have been very kitten resistant being more sturdy than expected at this price point. The only plastic is the adjustable collar that holds the two column sections together with the rest being metal. . Running the speaker wire through requires some forethought and patience. It has to be started from the speaker end of the stands and i disassembled the column to make it easier to thread through half of it at a time. There are notches in the bases which allow the wiring to escape without being rested on that aren't shown in the instructions, so keep an eye open for them. . Aesthetically speaking, they are better looking than the pictures indicated and are very unobtrusive especially when placed behind furniture. I'm very glad that i didn't buy cheaper stands. If i need more stands, i'll be buying another set of these.

Z. Lindsey, Walsall

These stands are actually very good for the price. I used them to hold some monoprice satellite speakers (model 10800), about 3 lbs a piece. . Build quality is good. I almost didn't buy these after seeing the complaints others had about the stands not being able to keep the desired height due to the plastic piece that connects both tubes. . My speakers are approximately 3 lbs each and the stands have no issue maintaining their height. I've even pushed down hard on them and they still stay secure. . (reference first picture) i think the problem people are having is they're perhaps getting rid of a plastic clamp that goes around the top tube. This piece is necessary for the top tube to get tightened properly by the conical connector that goes down when tightened. As you tighten the plastic connector (which many are complaining to feel cheap), the conical top part of the connector comes down on the c-clamp (seen in the photo on my hand) and tightens it around the top thinner tube of the stand. It works well and as designed. . My only complaint is that the the ports on my speakers get covered by the bracket but i realize that no stand out there can possibly fit all speakers. I'm probably going to have to find a different solution as to not have the port holes covered. . (reference second picture) also, the hole where the speaker wire comes out from is very tight. I use 16awg speaker wire and it barely fit through the hole. It wasn't a big deal as i just pulled them out with tweezers but it was fairly inconvenient. . The base also requires you to peel and add many tiny felt pieces that are kind of a pain to do. . Overall, however, i cannot dock it any stars as the stands are perfect for my need and are of very good quality for something of this price.

G. Teresa, Aquitaine says

These are a pretty solid set of stands. The base has a good weight, so it doesnt topple at the slightest nudge. Good height and plenty of mounting options. Holding my polk owm3 with ease. My only con is it states you can run the speaker wire inside the stand, maybe if you use a thinner gauge wire. Couldnt get my 16 gauge wire up the tube. Fought it for about 30 mins and then just wire tied it down the post. Maybe if i feed the wire the opposite way it might work. Aside from that this is a great product

Q. Josephine, Wisconsin says

These are great speaker stands for low cost and good quality. Comes with a few different options on how your speaker is mounted to the stand. The only issue i could see is if you have a speaker wire with the ends already attached, you more than likely wouldn't be able to thread the wire through the pole as the opening on top is rather small. And if you are adding banana plugs to speaker wire, then just add them after you thread the cable and it'll work out great. Also, some have commented on the telescoping part of the pole not holding, this is not true. Not true, unless you install the pole upside down which could happen as there are threads on both ends of the pole. Flip the pole over and it works great. The directions are simple but correct. 10 minutes worth of assembly and you should be listening to your newly added speakers.

A. Brenda, Bedfordshire

I have sony bluetooth speakers that are wireless. Sort of, they do have to be plugged into house current for power. Therefore, it is neither practical nor attractive for me to to hang my speakers on the wall. The sanus speaker stands fit my need. My two negative comments about them are minor:. 1) the power cord of the speakers cannot run inside the poles that hold the speakers, the pole diameter is suited for speaker wires only. 2) with speakers attached, the speaker stands are a bit unsteady, so i would suggest that sanus give the stands a larger and/ or heavier base to improve stability. Again, my negative comments are minor and these stands work okay for my need, therefore 4 stars.

R. Jarvis, Torbay says

I like these speakers and the styling. However, the speakers that i have sitting on them can't be screwed onto a bracket that was included. There were some double stick pads that came with the stands, but they are not well suited and strong enough to keep both speakers in place it bumped. My bose bookshelf speakers are smaller than the ones that these stands are supposed to be used with apparently. . I didn't realize when buying them they were made for specific speakers that you can screw brackets on to keep them in place. I just need to find something to keep the speakers i have from falling off. Otherwise, i like them.

D. Carolyn, Manchester

Good for the price. I paid just under $40 for a pair of these. Reading reviews and questions here helped immensely in setting them up properly, so keep reading before you order or set them up. The first set went to hold up my back speakers on a jbl 5. 1 system (the one with the oval speakers. ). . Doing four stars because i agree that the paint and structure of these should be treated delicately, you can damage the threads cross-threading or tightening the height adjustment too far. But, knowing this before hand and planning it out got me much better sound out of my back speakers. (were on shelves and tables before. ). . How to set up: count your parts and lay everything out. Put the bottom tube in the stand and put on the rubber feet (if you need them. ) thread speaker wire through the bottom to the half-way point. Using the supplied mounting hardware, choose how to place your speakers on them. I ended up using some hardware from the speakers too. There might be several ways. Mount the speakers how you planned and put all the screws in gently. Only tighten after it looks right. Thread the remaining speaker wire, you will need tweezers to get it out the hole at the top. Only then do you put the two parts together. Adjust the height by holding the first one and eyeballing where you want it, then tighten. Match the second with the first. Careful, you may not be able to tighten it more than once, and don't tighten too much. It helps to have a second person pull out the slack as you handle the height adjustment. . The first pair i bought were good enough i am back getting the second set now.

. Guest, Lincolnshire says

These speakers did the trick for me at a good price. My only complaint was trying to maneuver speaker wire through them. Impossible to push the wire from the bottom to the top. Any decent speaker wire will not traverse the curved part of the stand. However, if you run the wire from the top to the bottom, it works fine. I also had a problem with one of the mounting plates. The female insert inside the top of the stand was somehow pushed too far down for the supplied screw to reach, so i had to find another screw to use in my own stock. Other than these two problems, they speaker stands work fine.

. Matherly, Schleswig-Holstein

These speaker stands are great, you just have to be careful your speakers are able to attach. I purchased these speaker stands for my vizio s4251w-b4 satellite speakers and it was a bit tricky getting them to attach the way i wanted. If your speakers don't attach though, they come with a sticky piece that will hold your speakers up by just standing them on it. Not quite as secure, but they get the job done. I currently have mine attached this way, but plan on screwing them in once i can get some more screws to get it to work, since the screws that come with this don't fit in the back of the vizio speakers. The only real problem i have with these is that unless you can detach the cable heads from your wire, you won't be able to fit them inside the stands to hide your wire because the hole is way to small.

L. Arnett, Champagne-Ardenne says

Good, heavy duty stands. I bought these for my samsung hw-k950 rear speakers. There were questions asked if these would work with the samsung soundbar rear speakers and they do. The stands come with multiple plates that would fit almost any speaker. These are heave and nicely coated but there are a few drawbacks: the l brackets when installed with the aforementioned speakers point the speakers a few degrees upward. I had to tweak (bend) the brackets slightly to get them to direct the speakers horizontally. Also, it has a wire management system for speaker wire (a hole near the top and another at the bottom to allow speaker wire to be ran invisibly) but there is no way to run power cords (plug too big to fit into hole). I may use small black wire ties. The other drawback is the pads they provide to keep the stands from scratching hardwood floors - they are nothing more than electrical tape dots (as if someone used a hole punch and punched out 20 or so small circles). They were tedious to apply (imagine trying to remove the backing from 20 hole punched size dots and then applying said dot to a small landing on the bottom of the stand). For a few bucks more, they could add some more substantial rubber pads. Other than that they seem to be good adjustable stands.

. Isabel, Rhode Island

Works great with our bose acoustimass cube speakers. Used the thumbscrew from our existing shelf stands to tighten the cubes onto the stands. Didn't have a problem extending the stand to full height. The base is heavy enough to hold small speakers in a stable position.

P. Cathy, Centre says

Very good quality. The bottom plate is basically a hunk of cast iron. Aside from someone intentionally pushing it over, your speaker should never see the floor. Wires feed straight up the rod, although my 16 gauge was a bit tight getting through the eyelet and the curve. Looks clean if you hate exposed wires. Can't really comment on the speakers since those don't come till tonight, but with the multiple mounts, worst case scenario you gotta slightly diy the fitment. My only gripe was the felt pads. They are insanely thin, and precision cut individually so peeling each pad back off the paper (i think there was 16 total? ) took a minute. So if you have hardwood floors, don't clip your nails for a few days when ordering. Overall, i'll probably get another set to reposition my front speakers.

. Rochelle, Louisiana

Love the stands! their look & style are great, and the product materials are better than i supposed they would be. The only problem i had was trying to get the 12g wire through the cable track. The upper arm inside diameter is exactly the same as the wire's diameter; pushing through the offset was tough. Tougher still was feeding the wire out through the hole in the arm. I finally stripped about 3 inches and got the bare wire through, which allowed the rest to follow. All-in-all, i am very satisfied with these stands.

X. Maria, Bracknell Forest says

I'm extremely impressed with these speaker stands, particularly for the price. I'm using them with dual sets of bose cube speakers with the stand fully extended and they're very stable, thanks to the heavy cast metal bases. The appearance is impressive, too. They're flat black and very simply styled. The extension and locking mechanism works well. . The most difficult part of installation was peeling the backing paper off the many small pads that go on the bottom of the bases. You'll want a pair of tweezers, hemostats, or small needle-nose pliers to pull the speaker wire out the slot near the top of the tube.

. Jackson, Enfield

Bought these for a couple of small, rear surround speakers. The base of the stand is sturdy and the masts are made or metal, so they feel sturdy as well. The top half of the last can be raised or lowered and it is secured with a cylindrical piece of plastic. This worries me as as possible fail point. Plastic can fail and crack if overtightened, and i wish they had used metal. But i guess it was a cost saving move. Personally, i would have paid a bit extra for all metal. The stands come with 3 different ways to attach speakers to the masts. None of them quite worked for me, but i had some industrial strength velcro available that i was able to use at th bottom of the speakers to then secure the speaker to the metal base at the top of the mast on each speaker stand. I was just unlucky having a speaker type that was not quite in the norm, but i feel as if most people will find that these stands can be secured to almost any type of speaker, so long as the speakers are not too big or too heavy.

. Wells, California says

Ordered these for my samsung swa-8000s speakers. However, when i received them, they were missing the speaker attachments. Just had the bases and stands. Frustrating. Sanus sent me an email asking for a review or contact with problems. So i contacted them and told them what happened. They sent me a new set 3 days later. Pleasantly surprised. Great product backed by awesome customer service. . Thank you sanus.



Top adjustable height speaker stand Review

Disadvantage and Critical reviews

A. Powell, Bradford says

They're pretty standard but sturdy stands. I had some difficulties with my onkyo skr-590 speakers (part of ht-s7800 set) - the mounting holes are on the top and they are too tall to install as directed. I simply turned the bracket around so it hung 'backwards'. Also, the provided screws just barely did not fit in the mounting holes on the speaker. A quick drilling widened the brackets enough. . Probably the biggest gripe though is the floor bracket. It's nice, solid metal that provides a solid base. However, with hardware floors, you're going to want to put felt pads on the bottom. They provide them, but the bottom of the bracket is supported by 10 tiny (1/4") stumps and you have to put a pad on each, 20 total! unfortunately, they only provided 17 in the box.

Y. Guest, Queensland

These are strong, stable, well-made stands that probably suit most users needs, and have several advantages over alternative products. However, the hole for the wire is pretty much wide enough for just the wire. If your speaker wires have any sort of plug on either end, it probably cant be threaded through the pole - and the vizio soundbar system wires have *fat* plugs that *defniitely* aren't threadable here, even though three different elements on the page indicated or implied that these would work with the soundbar system i was buying.

V. Anderson, Poitou-Charentes says

I thought i did enough research on these to make sure they were the right fit for my vizio 38" 5. 1 surround sound speakers, but i guess i didn't. As you can see in the first picture, the end of the speaker cable is more than two times bigger than the hole on the speaker stand that the wire is supposed to fit through. In the second picture, you can see that the wire has to be wrapped around the speaker stand because it won't fit in the tube. Don't get me wrong, the speaker stand is durable, but it just wasn't designed for the vizio 38" 5. 1 surround sound speakers. Hopefully this review prevents somebody who has this surround sound system not to buy these, because i wish i saw a review like this before i bought these speaker stands.

R. Edith, City of London

I bought these "universal" stands to pair up with a new definitive technology procinema 600 surround system to save considerable money over dt's own matched set at $99 per pair. I made my own mistake in getting 16 gauge wire which slides fairly easily up the speaker stands until you get to the exit opening. It took heroic effort to make it work given i spent good money on the wire and the truth is, that gauge wire is too much for these stands. But that's on me. The main point of contention is that, at least for these dt speakers, the "universal" mount options don't work. I am not a genius on this stuff but was able to rig up a somewhat precarious bottom mount for my speakers that works just ok. Given what i know now, i would have spent the money on the dt stands. That said, the sanus stamds are a good, substantial product that i assume would work great for most applications. So, a generous 3 stars is my call.

N. Ruff, Cumbria says

I have purchased this product to attach my vizio rear satellite spekers. Unfortunately due to small diameter pipe hole and the curve at the top, cable of my speakers could not pass through. This would be the case with any satellite speakers with fused attached jacks at both ends. Returned for refund and replaced with similar product with straight pipe and big enough diameter that i can run the cables through

E. Allen, Idaho

The stands themselves are fine. They do the job. I have vizio speakers, for which the stands did not include screws. I was able to pick up four m4 x 10mm screws from the metric screw section at lowes for 80 cents (they're with the regular screws, but in the drawers labeled metric), which work with the vizio speakers, so no worries there. The only true issue is that the vizio speaker cable connections are too large to utilize the internal portion of the speaker stand, leaving the wire dangling in view. I ended up using black electrical tape to tape the wire to the back of the stand. You'll want to wrap the tape around the stand so that the tape overlaps itself in order for it to secure properly. I tried running the tape down the back long-ways, but it wouldn't stick to the stand to secure the cord. The good news is that the tape isn't noticeable unless you get up close to it, but it would have been nice if the stand were able to hide the cords properly.

G. Sandra, Nottinghamshire says

Definitely not as tall as i was expecting. That's mostly my fault for not reading the description. The height should work, i just like to mount my rear speakers above ear level. I know that's not optimal, but it keeps people from hitting them as often. . If you have keyhole mounted speakers you may have issues. Actually, if your mounting holes are on the back of your speakers toward the top you may have issues as well. I say this because the bolt that goes into the keyhole groove was juuuust too wide by a little bit. It took some serious convincing (with a hammer) to get it through. Then i had a problem of the bolt not sticking out far enough and trying to tighten the (cheaply made) plastic fastener on the other side of the bracket causing the plastic fastener to partially dethread itself. My other issue was due to the mounting holes being at the top of my speakers. This made them sit too low and they were longer than the portion that is bent backwards. So i had to mount the speakers the wrong way (which was clearly marked with a red x in the instructions, hah) with the speakers being pushed out away from the base by the bent portion. They still seem to balance ok, though they are not super stable. . I was able to sort out my issues. However, more info for you guys so you don't have to struggle with them.

. Paige, Reading

The setup of these werent universal and shoddy. I had to point a bolt up to get it to fit in the stand, another stand i had to force the bolt down. . They went from the "4 bag system" to the 1 bag system and must not have told their line employees. They just count 1 bag and tossed it into the box not realizing they didnt have the hardware or the bolts in two separate boxes. . Why would you send out your customers 50 lb boxes incomplete especially two separate boxes. . And they are very lop sided with even the lightest speaker

. Glenda, Halton says

I bought these after reading an answer saying that they could hold up to 30 pounds - well, the instructions say they can hold a maximum of 3. 5 pounds, so that was a bad start. My speakers were 5 pounds so not outside the realm of possibility, but the poor design of these stands means that you could only attach speakers with that have an attachment screw at the very bottom - the metal of the stand curves inwards and would block attachment at any other point on the speakers. The stands are also cheap and ugly in appearance, and made from low quality material. Spend a little more to get something better. I will be returning these.

J. Hadley, Texas

The stands are ok. I bought them to use with my vizio 38" 5. 1 surround sound speakers. I give it only 3 stars due to mounting bracket is kinda in the way of where you plug the wire into the back of the speaker. And the screws that came with the stands did not fit my speakers. So i did not get a snug fit. I'm also only giving 3 stars because the wires do not fit inside the neck of the stands so it can be hidden & come out of the base. It seems that only old school speaker wire would fit. So i had to use scotch tape to secure the wires behind the neck all the way down to the base to keep them as much out of sight as possible.

B. Carrie, Newcastle upon Tyne says

I had some issues figuring out how my speakers would be best installed using this set, and none of the screws fit (despite many options included in the box), so i had to buy additional screws at the hardware store. While extending the height of these, two out of four of them broke their plastic ring that allows them to be tightened in the middle and therefore stand at their tallest. I replaced the plastic pieces by wrapping tape around the poles where the plastic pieces used to be (underneath - it's invisible to guests), and they work fine. They definitely look nice. I like that you can feed the wires through the poles. . This set does attempt to cover every option possible for successfully installing any kind of surround sound speakers, but i'm sure there are just too many variations out there to cover all of them - hence my trip to the hardware store. The poles and base seem heavy duty, sturdy and look nice.

I. Lindsey, Windsor and Maidenhead

They are nice and heavy. But i bought these stands for use with the rear speakers of a 40" vizio 5. 1 soundbar vizio sb4051-c0 40-inch 5. 1 channel sound bar with wireless subwoofer and satellite speakers (2015 model) on online store's suggestion. These two are not really compatible. First of all, the wires are too thick to go through the stands. Second, the speakers' l-shapged audio jack really sticks out from the rear of the speakers, and depending on how bent the metal mount is you may have some residual stress on the plug. I didn't mind, i just wanted something to stick the speakers to that wasn't a wall, but i would have researched for another set of stands if i had known.

F. Garner, Arkansas says

I ordered these and one of the threads was mismatched and would not screw in to the extension arm. I asked for a replacement and luckily i did not send the other one back, because the new one they sent me also had mismatched parts that didn't thread up so could not be screwed together. I had to mix and match the parts from three of these to get two working ones. . Now i have wasted about two hours of my time dealing with this which has basically cost me more then the products are worth in my time. In my mind it is total bs and i will not be compensated for it. Pretty ridiculous that two replacements would have the same damn problems. Get it together qa and sanus. You're wasting peoples time and money for a low quality overpriced product. . In the end i gave two stars because i do have a working stand after mixing and matching the parts from three separate boxes, but i should not have had to go through all of this to get here.

Q. Annette, South Carolina

So, here's the deal with these speaker stands. I had tried the monoprice stands first, since they were cheaper (asin: b001vrj5d4), but unfortunately it was not possible to connect my speakers to them, since the attachment was so high on the speaker and the speakers themselves were so long. The unit did not fit between the mount and the bend in the stand. For the record, i was trying to attach the surround speakers (skr-590) from an onkyo ht-s7700 system. . I had noticed in the reviews that someone was able to get long speakers to fit on these stands by reversing the angled bracket so that the speaker itself would be positioned further from the stand once mounted. I tried that, and it appeared it would work, but unfortunately the speaker mount is a keyhole one, and the provided screws for keyhole mounts were too thick to fit into the narrow portion of the keyhole. I realized then that the only way to get these things to attach would be to remove the keyhole mount and use the screws to attach the flat bracket included with the speaker stands, then attach the angle bracket to that. Once i decided to do that, i could obviously place the bracket anywhere, so i lowered it considerably from where the keyhold bracket originally was, which means in hindsight that i probably could have gotten the monoprice stands to work also, but at this point i had already initiated the return process and didn't want to reverse it and go through the whole process of disassembling and reassembling all over again. . The reason i mention that is because, after assembling both units, i would have to say the monoprice stands feel sturdier to me. While the bracket on the monoprice is plastic and the sanus one metal, the rest of the stand just feels "wobbly" once assembled, and i fear overtightening since so many of the connectors are plastic, and i can see them failing pretty easily (and photos of broken connectors in these reviews doesn't reassure much either). . For now, i will keep the stands since they'll be placed once out of the way and almost never moved. But i feel for $40, these are actually overpriced. Or at the very least, they should cost less than the monoprice version, which was $24 at the time i'm posting this review.

C. Margaret, Torbay says

Good speaker stands made with quality material. The stand base is sturdy but a bit large which forces the stand to sit several inches away from the wall. The design of the slender bent neck pulls the speaker back some. My biggest complaint is the hollow tube for the stand does not have access ports that are large enough for anything but the speaker wire itself. So if your wire has an attachment or a plug to connect into the speaker you have to expose the cable or route out the hole. I ended up wrapping the wire around the speaker stand to give a better appeal but it is still not ideal. . Overall not bad but i find a better product that can hide the wire better i'll buy and return these.

U. Anonymous, Delaware

Bought some energy 5. 1 take classic home theater speakers (which are awesome) and thought i'd try the sanus speaker stands. Honestly i wish i could return them but reality was that they were not tried for at least a month or more after they were delivered. I found it almost impossible to utilize the brackets provided by sanus to actually attach the energy speakers to the stands. After trying several configurations to get those stands to work with those speakers i ultimately found one way to attach them to the stands. The negative is that way does not look correct nor does it seem functionally correct. It's like i'd have to almost fabricate my own brackets to get these stands to work with the take classic's. I like the adjustable feature of the stands, the balance and sturdiness, but trying to get a great set of award winning speakers hooked up to these stands is impossible.

. Cathy, Auvergne says

The stands appear to be quality so i have no complaint with them. For bose owners please take note. Bose jewel cube speaker wires can not be inserted through the tubes in these stands. The plug is to large to fit through the tubes. Also, i had to modify the mounting plates on the stands before they would fit the bose speakers. The mounting screw is so close to the wire plug that none of the included mounting plates would work without being modified. I also had to purchase screws from a local hardware store because sanus does not include m4 screws with the stands. A bit more monkeying around than i would have liked but that's the way it goes sometimes.

H. Olga, Havering

Well you always get what you pay for. For the money they are ok speaker stands. They are heavy enough not to fall over. The quality is just ok. You would have to spend at least $150 to get a quality stand. The hole that you are supposed to run the speaker cord through so it goes inside the stand is so small i doubt you could even get a small speaker plug through it. If you plan on hiding the speaker wire you are going to have to buy speaker wire and push it through the stand and splice into the original cable. That is the biggest drawback.

K. Perez, Alaska says

I purchased these for my bose wireless 300 speakers. But, i encountered several problems. . Specifically, the adhesive pad designed to anchor the bottom of the speaker to the mounting plate at the top of the stand does not stick to the speaker. The speaker bottom has a rubberized material and the adhesive does not stick to it. In addition, the stand's base requires a ton of these tiny round stickers that adhere to the bottom "feet" to keep the plate from scratching the floor. Getting the paper backing off each is cumbersome and frustrating. Assembly was straightforward, but in light of the these issues i elected to return them for a refund.

L. Anonymous, Slough

This is not as universal as it claims to be and unless you are running straight speaker wire there is no way you will be able to use these saints to hide the wire. Even if you are using straight speaker wire its going to be very difficult to get it threaded through these stands. The base is very solid cast iron so if they will work for you they are very stable. The base is one peace and i found that were i wanted to position the speakers was alway somewhere that has legs for my funature were so i could never get the stands where i wanted them. They just wouldn't work with my speakers so i ended up sending them back.

S. Guest, Idaho says

This is a good product from what i can tell. By rating is based on the stands' incompatibility with the vizio s4251. The rca wires will not fit through the poles. There's some debate about compatibility in other reviews and it still appears in the "frequently purchased with" list. I suppose it does work if you want to twist your cable around the pole to the top, but there's other options. If you have the same vizio i have, purchase the atlantic satellite speaker stands. Again, it's not an issue with these speaker stands, more an issue that other reviewers and online store tend to indicate that they do work together.

P. Pamela, Poole

This product was listed together with "vizio sb4051-c0 40-inch 5. 1 channel sound bar with wireless subwoofer and satellite speakers (2015 model)" under the "frequently bought together section. " however, the stands are not as compatible as i would like them to be. The cables that connect the satellite speakers to the subwoofer are too large to fit through the cable holes on the stands. Also, the connection to the speaker is so large that you cannot securely screw in the satellite speaker without having it press hard against the cable, which makes me worry about the connection. I have attached some pictures with my concerns. I blame myself for not researching product compatibility more thoroughly. I find it a little concerning though that enough people have bought these two products together with enough frequency that online store would list them together. I'm hoping this review can help break that association at least a little bit.

O. Carolyn, Florida says

It is advertised that it mount bose speakers; however, buyers beware that if you own the virtually invisible 300 speakers, these stands will not work for you. The vi300 require a specialty plate to mount which these stands do not come with. Other than that, the stands seem like sturdy stands. One other issue i would bring up is that it is nearly impossible to run speaker wire through the actual metal like it is advertised. Once you push the speaker wire to the bend, it will not go any further.

M. Joanna, Minnesota

Everything about this product is great, except for one tiny thing. One of the nuts embedded in the top of a stand was too far down the shaft to thread the screw holding the speaker's backplate. So i had 3 options: return the entire product, try to find another screw the exact same specs only longer, or get out my angle grinder with saw blade and cut the top 1/2" off the shaft. I chose option 3 because it was quick and easy. Everything works now. But i imagine a vast majority of the people are going to have to choose option 1. . But, the product itself is nice. Well constructed and provides many options for mounting your speakers. If you don't get the same issue i did, go for it.

T. Medina, South Carolina says

I bought these for my lg spk8s-2. 0 wireless rear speakers. . The good: they're mostly metal and solid. Looks easy to thread the wire. . The not so good: the stand doesn't come with the correctly-sized bolts for the speakers. Annoying. The base doesn't have robust padding to protect your floor. There are these very thin stickers with minimal padding. The part that connects the two metal tubes together is plastic and will not last as long as the rest of the stand.

W. Nielsen, Ohio

I recently purchased vizio sb4051-c0 40-inch 5. 1 channel sound bar with wireless subwoofer and satellite speakers (which are awesome btw) and was in the market for speaker stands for the satellite speakers. As it so happens, on the box for those vizio speakers, they use these exact same stands in the promo picture. I figured, if that isn't a telling sign that i should buy these stands, nothing is. . Well, as it turns out, the promo people don't always pick what works the best. . Let's start off with construction. There admittedly isn't much to put together but the directions are confusing nonetheless (ikea take note). The worst part is the instructions on how to assemble the thing that actually attaches to your speakers. One of the best parts of these stands is that they give you a couple different options to attach the speakers which is nice because you will most likely find a way that works for you. They even have a catch all way where you just stick the speaker on to the stand using a sticky pad. The pad is pretty good and doesn't look or feel "cheap". . So far you are thinking, what's the problem? this sounds great! here is where this all breaks down. The three different plates they give you to attach to the speaker are useless. Seriously, i don't know what possible speakers they designed those around but the holes are far too close together and they allow almost no room for any satellite speaker that is wired. This basically eliminates using those three mounting options for anything that is wired. So now you are stuck with the sticky pad which is fine but it doesn't feel as good as screwing it in. . The pole includes a hole near the top to run the wire through. In the base, there is a little area where you can loop any extra cable and then run it through a channel in the bottom to where it needs to go. Smart idea but poorly executed. The whole in the top is tiny. The only chance you have of getting something in there is if you are using speaker wire and cutting it yourself. Any bundled speaker system that includes all the wires and speakers are going to have their own rca style heads which have no chance of fitting through the tiny hole. . So let's recap here. There are a bunch of mounting heads that are unusable with wired speakers. It has a slick channel to hide your wires that you can only use if you are running your own speaker wire. . These are severe limitations that make this product highly unusable for most people. That is a shame because this is a sturdy, solid feeling stand for a pretty good price.

D. Meredith, Nordrhein-Westfalen says

List price says $200, bought them for $39. 99. They're more like $39. 99 in quality though. It comes with mounting hardware for 3 different types of speakers, which is fantastic. But none of the 3 fit my klipsch quintet speakers, the screws just weren't long enough to fit into the back of the speakers so i had to go to the hardware store to pick up some new screws. . Height adjustment is easy, but they speakers tend to "wobble" when fully extended to the 48" that it says it can go to. They didn't feel sturdy so i had to adjust them down to about 30-34" before it wouldn't "wobble" anymore. I know i'm not touching the speakers so he wobbling shouldn't effect anything, but it's the integrity of it that annoyed me. The base is weighted well so i never felt like they'd top over on their own. . For $40, they do their job. For $200, look to spend your money elsewhere.



Leave a Reply

You must be logged in to post a comment.


Back to Top

Related Products

  • Read Review
    Mounting Dream Bracket Articulating 400x400mm (fba md2377)

    Mounting Dream Bracket Articulating 400x400mm (fba md2377) 334

    Most Wishlist Mounting Dream Bracket Articulating 400x400mm (fba md2377), Md2377 tv wall mount bracket 26-55 inch led, lcd, oled flat screen tv full motion swivel articulating arm up to vesa 400x400mm 60 lbs fits 26-55" tvs this mount fits most of 26-55" tvs sold today. it fits tvs mounting holes as close as 3"x3" or as wide as 16"x16" (in tv terms - vesa 75x75mm to 400x400mm). specifically, -mounting dream md2377 tv wall mount bracket 26-55 inch led, lcd, oled flat screen tv full motion swivel articulating arm up to vesa 400x400mm 60 lbs tilting
    • Outstanding wall mount. You can't beat this for the price. Seriously, it adjusts in every direction, and the telescoping arm extends waaay out. We can stretch the bedroom tv out far enough that my wife can watch tv while in the tub (apparently grey's anatomy is that addictive) and i can watch sports... go to https://puqus.com/mounting-dream-bracket-articulating-400x400mm-3340qooz4de/#mounting-dream-bracket-articulating-400x400mm
    • Feature: Viewing Becomes More Comfortable: Tilts Tv Up 5 And Down 15 To Reduce Glare, Swivels Tv Left Or Right According To Your Seats Position. Pull Out To 19" And Retract Back To 3. 2", Making Your Tv Alive To Move.
    • Feature: Easy Installation With Decent Instruction And All Included Hardware In Pre-labeled Bags. +/-3 Post-installation Adjustment Allows Perfect Tv Leveling. Comes With Velcro Cable Ties And Bubble Level As Gifts.
    Lowest Price Mounting Dream Bracket Articulating 400x400mm (Consumer Electronics) Fba Md2377
  • Discover it
    Charging Station 10 Port Multiple Simultaneously (Unitek)

    Charging Station 10 Port Multiple Simultaneously (Unitek) 1128

    Buy Now Charging Station 10 Port Multiple Simultaneously (Unitek), Ipad charging station, 96w 10-port usb charging dock quick charge 3.0, charging stand multiple device, charging 8 ipads simultaneously - white upgraded desktop usb fast charging station charges up to 10 usb devices simultaneously 1 power supply. 11 baffles allow you to divide the area up to match your devices, holding a large number -ipad charging station, unitek 96w 10-port usb charging dock quick charge 3.0, charging stand multiple device, charging 8 ipads simultaneously - white upgraded divider
    • Included: Charging Stand Organizer For Multiple Devices: Charges Up To 10 Usb Powered Devices Simultaneously, Especially Support 8 Ipads At Once. Rapid Charging With Bc1. 2 Technology, Provides Up To 5v2. 4a Of Power Per Port. Hold Your Ipad, Iphone, Smartphones, Tablets And Other Devices All In One Place And Keep Your Device Nice Organized.
    • Included: Detachable Dividers: Adjust Width Easily To Any Size You Need, Hold Your Ipad Or Iphone Even They Are In The Cases And Preventing Your Devices From Being Scratched. Besides, High-quality Dividers (5pcs Tall, 6pcs Short) Of Varying Heights: Taller Dividers For Larger Devices Like Ipad And Tablets, Short Dividers For Iphone And Kindle.
    • Excellent quality and size for use with a charger organizer. My j7 prime charges just as fast with these as with the original cables https://puqus.com/charging-station-10-port-multiple-simultaneously-11281ncqj5v0/#charging-station-10-port-multiple-simultaneously
    Sale Charging Station 10 Port Multiple Simultaneously (Consumer Electronics) Y 2190a
  • Low Price
    Lg Electronics Sh2 2.1 Channel 100w Sound Bar Certified Ed (Consumer Electronics)

    Lg Electronics Sh2 2.1 Channel 100w Sound Bar Certified Ed (Consumer Electronics) 2168

    Very Cheap Lg Electronics Sh2 2.1 Channel 100w Sound Bar Certified Ed (Consumer Electronics), Electronics 2.1 channel 100w sound bar certified the sh2 combines performance and convenience in a stylish sound bar. the 100 watt sound bar also has a wired sub-woofer to add the sonic depth of bass. fill the room music for everyone -lg electronics sh2 2.1 channel 100w sound bar certified edBest Buy Lg Electronics Sh2 2.1 Channel 100w Sound Bar Certified Ed (Consumer Electronics) Sh2
  • Free Shipping
    Reliamount Apple Tv Mount Compatible Apple Tv 4k (2425)

    Reliamount Apple Tv Mount Compatible Apple Tv 4k (2425) 837

    Discover it Reliamount Apple Tv Mount Compatible Apple Tv 4k (2425), Apple tv mount compatible apple tv perfect for wall-mounted tv owners - people wall-mounted televisions often wonder where to put their new apple tv. one option is to tunnel an hdmi cable through a wall to an entertainment -reliamount apple tv mount compatible apple tv 4k
    • Advantages: Compatible With All Apple Tvs (including The New Apple Tv 4k And The 2nd, 3rd, And 4th Apple Tv Generations).
    • Advantages: Perfect For Tvs That Are Mounted To A Wall.
    • Perfect for my apple tv 4. More expensive holders come with various means of attaching it to the tv. Hangers, hooks, clips ect. I bought one of those once. Never again. Clip broke first time i pulled tv out to connect another device. This one just has really good 3m type sticky material. Holds up an... go to https://puqus.com/reliamount-apple-tv-mount-compatible-83717s25fma/#reliamount-apple-tv-mount-compatible
    Economical Reliamount Apple Tv Mount Compatible Apple Tv 4k (Consumer Electronics) 2425 Rm Classic Atv

Product Image Gallery

Top-sanus-adjustable-height-speaker-stand-198302hzhucw-Content