Suptek Adjustable Articulating Rotation Ma2720 (Computer Add On) 2185

Review for full motion adjustable tv wall

Price was $13.50. This unit does not have an actual tilt forward/backward function. It will allow you to extend out, rotate your screen in a circular motion, pan left and right, but you cannot tilt your screen up and down. The main reason this is an issue for me: i installed this on the wall, next to our bed, at the foot of our bed, probably 6ft in the air. I have used all the wiggle room the bottom part of the mount will provide, and i have even loosened the top two screws on the plate to allow the tv to fall forward a little more, but we still have to view the 22in tv from "underneath". On our screen, this takes a little bit of the brightness from our view. . This is an excellent mount for the price, but if you're going to have all that mobility except for allowing the user to tilt, i have to ask why? i do recommend this product to those who are okay with an eye level mount. If you're needing something going up on the wall, just keep in mind that this does not tilt forward.

-. Evelyn

Full motion adjustable tv wall mount rotation, swivel tilt tv arm bracket 15-27 inch led, lcd monitor plasma tvs vesa 75,100 suptek ma2720 is a articulating wall mount for led lcd tv/monitors, makes it easy to view your tv or monitor from different angles.  tilt, swivel, extend function provide smooth -suptek full motion adjustable tv wall mount rotation, swivel tilt tv arm bracket 15-27 inch led, lcd monitor plasma tvs vesa 75,100 ma2720

  • Included: Full Motion – 360 Rotation, 180 Swivel, 15 Tilt, Extended To 14. 96″ From The Wall, Meet All Of Your Viewing Angles.
  • Included: Compatibility – Compatible With Vesa 75x75mm And 100x100mm, Fits For Concrete Wall/wood Stud.

Buy Suptek Adjustable Articulating Rotation Ma2720 (Computer Add On) Ma2720

Buy Now


Nice mount and easy to put up. I like the cable tie system and it is easier than most to put up because you can disconnect the tv mounting plate from the rest of the mount. I actually was able to hoist the tv up by myself. One of the few i've used that came with a wall template. Awsome. The drawbacks are minor. The wall template needs to be put on the wall so the word "up" is backwards (i had to move everything up a half inch and redrill the holes) and the bullet level has blue liquid rather than green which kinda looks cool but it is way harder to read than its green counterpart in low light. The Best full motion adjustable tv wall ( Apr 2020 ) | Suptek-Computer Add On Review Included Suptek Full Motion Adjustable TV Wall Mount Rotation, Swivel and Tilt TV Arm Bracket for Most 15-27 inch LED, LCD Monitor and Plasma TVs VESA 75,100 (MA2720) Tv wall mount - ideal for most 15" to 27" led, lcd, and plasma tvs that weigh up to 28lbs (13kg). Full motion - 360 rotation, 180 swivel, 15 tilt, extended to 14. 96" from the wall, meet all of your viewing angles. Compatibility - compatible with vesa 75x75mm and 100x100mm, fits for concrete wall/wood stud. Features - removable tv plate designed for single-person installation, durable steel construction for lifetime use. Package - 1 tv wall mount, 3 velcro cable tie, 1 standard installation kit, 1 user manual .

Suptek Full Motion Adjustable Tv Wall Mount Rotation, Swivel And Tilt Tv Arm Bracket For Most 15-27 Inch Led, Lcd Monitor And Plasma Tvs Vesa 75,100 Ma2720 Review (ma2720)

I purchased this mount on lightning deals to use with a 24 inch monitor. This mount makes attaching the monitor so much easier than past mounts i ve used. You screw the bracket to the back of the tv then it slides down onto the arm and the bottom screws in place, making it easy for only one person to mount it instead of two people or one person fumbling around trying to hold the monitor while screwing in 4 screws. I highly recommend this mount. -L. Anonymous

Suptek Adjustable Articulating Rotation Ma2720

  1. Class: Electronics
  2. Brand: Suptek
  3. Color: Black
  4. EAN: 0806742646748
  5. Product Dimensions:
    Height:6.89 inches
    Length:9.53 inches
    Weight:2.20 pounds
    Width:2.36 inches
  6. Manufacturer: Suptek
  7. Model: MA2720
  8. MPN: MA2720
  9. Quantity: 1
  10. Part/Serial Number: MA2720
  11. Type: PC Accessory
  12. Category: COMPUTER ADD ON
  13. Size: 15''-27''
  14. UPC: 806742646748

full motion adjustable tv wall mount rotation, swivel tilt tv arm bracket 15-27 inch led, lcd monitor plasma tvs vesa 75,100 Pc Accessory, Suptek ma2720 is a articulating wall mount for led lcd tv/monitors, makes it easy to view your tv or monitor from different angles.  tilt, swivel, extend function provide smooth adjustment for all directions. specifications: 1. compatible with vesa: 75 x 75mm, 100 x 100mm2. fits screen size: 15-27'3. tilt range :15 degrees up/down4. pan/swivel range: up to 180 degrees5. profile: 6. 3 - 38. 1 cm6. maximum load: 13kg(28lbs)7. color:blackfeatures:1. great flexibility and adaptability. 2. this mount can swivel side to side and has an adjustment to tilt the screen up and down. 3.  removable tv plate designed for single-person installation. post installation level adjustment to ensure perfect level. 4. durable steel construction with black powder coated finish. common mounting and screen attachment hardware included. warranty & support:10-year guarantee from date of the original purchase. damage or problem due to any manufacturing defect, please contact our after-sale service team by email with your purchase order id and details of the problem. our support team will deal with your problem as soon as possible when we are at work. Suptek Adjustable Articulating Rotation Ma2720 (MA2720-Suptek).

Suptek Adjustable Articulating Rotation Ma2720 Pc Accessory

  • Bought this to mount a tv that i had laying around above my treadmill. I was worried that i wouldn't have the right "m" screws, but i was impressed that everything i needed was in a little organizer sealed in its own little section. . The trouble i had was not with this item, but being able to move the treadmill out of the way, which i couldn't. Ended up hanging this from a curtain rod using ikea kitchen hooks and it still worked because i was able to tighten it so it wouldn't sink with the weight of the tv.
  • Great and cheap usually don't go in the same sentence when describing wall mounts but i have numerous smaller displays that i need to mount to my walls, these are great at the price point and have 2 way arms and a pivot ball. I have purchased 5 so far and use them for monitors up to 27" without much issue. I can rotate my monitors fairly easily and they stay in position. With heavier monitors they do tend to sag a little when pulled out but i haven't noticed any issues with that and frankly, even the more expensive ones in this size tend to sag a little at full extension. Overall i would highly recommend these mounts for anyone who needs them. Cheap, prime shipping, and completely adequate for the majority of monitor sizes. . Only one caveat: use hex head lag bolts that are the proper length for your wall studs and mount this directly on a stud or use large toggle bolts on a sheer wall, do not mount this to drywall only. Even if you use drywall anchors. I would never let anyone wall mount any display or tv to a wall without having it lag bolted to a sturdy structural component like a stud or sheer wall. And even then, with a sheer wall you should use a decent size toggle bolt.
  • I bought one of these last year for a 32 inch tv. It was great. When i needed one for a 55 inch tv, i decided to use the same brand. That was a big mistake. It is the same mount with extensions to make it fit the larger tv. It is supposed hold up to 100 lbs. My 55 inch weighs 30 lbs and it sags the mount so badly, you have to relieve the weight to change positions.
  • Its solid, and sturdy. There is a problem with the tilt, and rotate function however. It is very hard to get it to tilt smoothly. I tried to loosen the nut, and even put a little grease on the sliding metal, but it just doesn't work vey well. If you want to loosen or tighten the movement you must remove the monitor first. Very poor design.
  • Easy install but way over rated for weight and tv size, i mounted a 32 30 lb tv and the mechanism sagged badly even after tightening the tension adjustment, the box says it will hold a 55lb tv but i am skeptical. I exchanged with online store for the next size up hoping it will hold. That being said i think the mount is clean, simple and mounts well and is well made for light weight monitors and tvs, fast delivery, easy return.

full motion adjustable tv wall Suptek Full Motion Adjustable TV Wall Mount Rotation, Swivel and Tilt TV Arm Bracket for Most 15-27 inch LED, LCD Monitor and Plasma TVs VESA 75,100 (MA2720) (Switch to Mobile/Desktop Version)

I bought 3 of these one for a 43, a 49 flat screen and one for a 55 inch curve samsung. The 55 inch curve is mounted with no problem and is a fairly heavy tv. Very satisfied with product. The other 2 are for the other 2 tv's that in taking to my place at a campground this summer. I would buy them again.

Suptek Full Motion Adjustable Tv Wall Mount Rotation, Swivel Tilt Tv Arm Bracket 15-27 Inch Led, Lcd Monitor Plasma Tvs Vesa 75,100 Ma2720
Click to see NoticeSuptek Adjustable Articulating Rotation Ma2720 (Computer Add On)"Easy to install but the instructions could use more detail. Even with the caucus pictures and extra parts leftover, this product was installed within 30 mins and articulates perfectly. Fits our 22" monitor screen and we were able to mount it near our kitchen."

(0) Question: Does this mount allow for full 360 degree rotation at the face?

(1) Question: Does it turn the tv left and right

(2) Question: Does it fit on curved tv ? picture saws curved tv.

Computer & Monitor Mounts » Projector Mounts » Speaker Mounts » Suptek Adjustable Articulating Rotation Ma2720 (Computer Add On) Ma2720

Pyle 15.6-Inch 1080p LED TV Ultra HD TV LED Hi Res Widescreen Monitor HDMI Cable RCA Input LED TV Monitor Audio Streaming Mac PC Stereo Speakers HD TV Wall Mount PTVLED15

Pyle model : ptvled1515. 6 led tv - hd flat screen tv15. 6 led tv - hd television with 1080p support features:full hd 1080p supportwidescreen hi-res displayselectable multi-viewing display modesbuilt-in full range stereo speakersstream audio and view image collectionsinput interface: hdmi, rca (l/r) audio, vga/pc, pc audio, rf (antenna)output interface: optical (digital) audio, headphonesremovable base stand for wall mountingincludes full function remote controlv-chip, closed caption & sleep timer functionstop panel button controlsworks with mac & pc technical specs:screen size: 15. 6 -inch (diagonal)screen display type: led backlightdisplay resolution: 1366 x 768 signal support: 1080p, 1080i, 720p, 480p, 480idisplay modes: 16:9, 4:3, zoom, cinemaviewing angle: 45 vertical, 90 horizontalspeaker power: (2) 3 watt, 4Ωt. H. D. +n: 10% 1khzrefresh rate: 60hztv tuner: atsc/ntscresponse time: 8msmax. Color: 262kcontrast: 600:1 (8000:1 dynamic)brightness: 200 cd/m2universal vesa mounting compatibility (75mmx75mm)remote control battery operated, requires (2) x aaa , includedpower: 100/240v, 50/60hztotal monitor display panel dimensions (l x w x h): 14. 7 x 1. 5 x 9. 6 stand base plate (l x w): 7. 8 x 4. 7

Pyle 15.6-Inch 1080p LED TV Ultra HD TV LED Hi Res Widescreen Monitor HDMI Cable RCA Input LED TV Monitor Audio Streaming Mac PC Stereo Speakers HD TV Wall Mount PTVLED15Pyle-15-6-Inch-Widescreen-Streaming-PTVLED15

Brand :    pyle
Size :    15.6 inches
  • Easily mounts on wall: save space in your home and opt for a clean design with the pyle led tv monitor. a removable base stand makes mounting to the wall a simple process.
  • Updated visual display: the pyle led tv has a full hd 1080p widescreen hi-res display creating a more expansive spectrum of colors, creating a more realistic picture.
  • Home entertainment center: the tv hd boasts multi-viewing modes & built-in full range stereo speakers. also included are hdmi & rca inputs for further customization.
  • Loaded with perks: the led tv screen features a v-chip, closed caption option, top panel button controls & sleep timer functions. also included in the set is a full function led tv remote control.
  • Upgraded content: the hd led tv allows you to stream audio, as well as view image collections easily. the hd tv is compatible & works well with both mac & pc.
Price :    $119.99
Model :    PTVLED15
Quantity :    1
Order click here :    normally ships in 24 hours
Home Theater :    Best Television (pyle product review) for Pyle 15.6-Inch 1080p LED TV Ultra HD TV LED Hi Res Widescreen Monitor HDMI Cable RCA Input LED TV Monitor Audio Streaming Mac PC Stereo Speakers HD TV Wall Mount PTVLED15 available ( Apr 2020 )

Mount Plus 201P Adapter Bracket Convert VESA 100x100mm to VESA 200x200mm 200x100mm Fits Most 23 to 42 Flat Panel TV

Vesa adapter tv mount adapters extend vesa mounting holes pitch from 100x100 to 200x200 or 200x100 so larger tvs can fit for the adapters to fit on your mount. Your mount s plate has to be 100x100 mm or 4 x4 . Make sure your tv mount can handle the weight of your new tv allow your 100x100 or 4"x4" tv mount plate to fit larger tvs with vesa mounting patterns 200x200 or 8 x 8 and 200x100 or 8 x 4 allowing you to adapt from one size to another. Please note; they won't work if your mount is larger than vesa 100x100 or 4"x 4"   hardware m5x12mm (8 screws) m5 nut (4 set) m6x14mm (4 screws) m8x20mm (4 screws) d8 washer (4 set) small space(8 set)

Mount Plus 201P Adapter Bracket Convert VESA 100x100mm to VESA 200x200mm 200x100mm Fits Most 23 to 42 Flat Panel TVAdapter-Bracket-100x100mm-200x200mm-200x100mm

Brand :    mountplus
Color :    black
Weight :    0.63 pounds
Model :    4330182694
Quantity :    1
Order click here :    normally ships in 24 hours
Speakers :    Best Ce Accessory (mountplus product review) for Mount Plus 201P Adapter Bracket Convert VESA 100x100mm to VESA 200x200mm 200x100mm Fits Most 23 to 42 Flat Panel TV available ( Apr 2020 )
Price :    $7.99 (was $10.99)
  • Universal wall mount adapter. apply to any wall mount with vesa 100x100mm and 75x75mm
  • Supports vesa 200mm x 100mm, 200mm x 200mm
  • Fits most tv from 23" to 42"
  • Standard mounting hardware included
  • Powder-coated black finish, 4pcs/pack

Mount-It TV Wall Mount Monitor Bracket Full Motion Articulating Tilt Arm, 15 Extension Arm Fits 17 19 20 22 23 24 26 27 28 29 30 32 35 37 39 42 47 LCD LED Displays up to VESA 200x200

Mount-it! mi-2042l is a versatile tv wall mount for small to medium size televisions. Its articulating arm offers full motion capability to adjust your tv for optimal viewing experience. Single stud installation simplifies the placement of the tv on the wall. 15 inches of extension is ideal for corner installation. Simply pull the tv away from the wall and turn it left or right. This wall mount bracket is also ideal for large computer monitors, especially monitors sizes 30, 32, 34, 35 and ultrawide monitors with larger vesa patterns. Install you monitor on the to improve your posture and to clear up space on your desktop. Step-by-step instructions and all the necessary hardware is provided. Installs in minutes. Features and specifications: universal design fits all tvs on the market. Fits screen sizes: 15, 17, 19, 20, 21, 22 26, 27, 30, 32, 35, 37, 38, 39, 40, 42, 43, 45, 47 inch tvs. Compatible with following vesa bolt hole patterns: 75x75, 100x100, 200x100, 200x200 and 250x100. Load capacity: 33 lbs tilt: 15 degrees up and down. Swivel: 180 degrees left and right extension from the wall: 1. 75 inch min to 15 inch max. Material: high-strength steel

Mount-It TV Wall Mount Monitor Bracket Full Motion Articulating Tilt Arm, 15 Extension Arm Fits 17 19 20 22 23 24 26 27 28 29 30 32 35 37 39 42 47 LCD LED Displays up to VESA 200x200Mount-Monitor-Articulating-Extension-Displays

Brand :    mount-it!
Color :    Black
Size :    17 Inch - 47 inch Articulating
Model :    MI-2042L
Quantity :    1
Order click here :    normally ships in 24 hours
Speakers :    Best Av Furniture (mount-it! product review) for Mount-It TV Wall Mount Monitor Bracket Full Motion Articulating Tilt Arm, 15 Extension Arm Fits 17 19 20 22 23 24 26 27 28 29 30 32 35 37 39 42 47 LCD LED Displays up to VESA 200x200 available ( Apr 2020 )
Price :    $12.49 (was $15.35)
  • Quick release tv mount: easy to install to a single wall stud. quick-disconnect feature allows the arm to be installed first, followed by the tv with the tv bracket.
  • Full motion tv wall mount: articulating arms with adjustable 15 deg tilt up and down; 180 deg swivel left or right. extends 1. 75 to 15" from the wall. 360 deg rotation for landscape and portrait orientation.
  • Monitor wall mount: works with larger 32, 34, 35 inch ultrawide monitors. use it as a full motion monitor wall mount to save desktop space and for ergonomic computer screen installation.
  • Universal vesa wall mount: compatible with vesa 75x75mm (3"x3"), 100x100mm (4"x4"), 200x100 mm (8"x4"), 200x200mm (8"x8") patterns.
  • Compatibility: fits samsung, sony, lg, vizio, tcl, element, sceptre, hisense and other tv brands between 19 and 47 inch screen sizes

WALI TV Wall Mount Articulating LCD Monitor Full Motion 14 Extension Arm Tilt Swivel Most 13 15 17 19 20 22 23 24 26 27 30 LED TV Flat Panel Screen VESA 100x100,75x75 1330LM

I ordered this wall mount for a handyman to install on my wall for a 24" tv. Everything was there and he installed the mount very easily into a stud into the wall. But, the screws in the package to use on the tv itself, were too long. They would have gone thru the screen. So, he had to find screws that were the right size in order to mount the tv to the wall mount. Maybe you could add a couple sets of different length screws for that. My handyman was very impressed with it otherwise. The arm is easy to move the tv. I really like it!

Please check the mount compatible for your tv: please check wood studs in your wall first. The mount can also be used on concrete wall and brick (anchors already included), but it can t be used on drywall. Check your tv weight and size, your tv size should be between 13-30 inches, and weight less than 33lbs (15kg). Compatible the vesa mounting holes on the back of your tv, the mounting holes must be less than 4 x4 (100x100mm). Please check tv cable and input area first, its possible blocked cable or input by the mount. Product specifications: fit 13 to 30 flat screen tv. Support weight up to 33lbs (15kg). Compatible with vesa mounting holes patterns:100x100mm/ 75x75mm (4"x4"/3"x3"). Fully adjustable 15 degrees upward and 15 degrees downward; swivel up to 180 degrees; 360 degrees rotate. Extends up to 14 and compressed 2 from the wall to save space package includes: 1 x wali tv wall mount 1 x user manual 1 x standard mounting hardware

WALI TV Wall Mount Articulating LCD Monitor Full Motion 14 Extension Arm Tilt Swivel Most 13 15 17 19 20 22 23 24 26 27 30 LED TV Flat Panel Screen VESA 100x100,75x75 1330LMWALI-Articulating-Monitor-Extension-100x100

Wali Articulating Monitor Extension Wl 1330lm (Office Products) FAQ.

Pretty good - few things to note: the mounting screws stripped on mine, which is a bummer, but only after the second time i screwed it in (mounted it too high at first), but the bolts are heavy duty, and i feel absolutely confident that my 22" monitor will not fall. The only other thing to note is they included a tiny wrench, which you might assume would be used to tighten the bolts or something, however, i could not find a single piece in the kit they fit. The mounting screws are screws - cant use the wrench on it, the wall mounts are bolts, and the wrench is too small for them. What is it for? -Notice from R. Patton, North Lincolnshire

Click to Show wali articulating monitor extension wl 1330lm (office products) Details

Overall happy with this mount. Very solid constriction, the arms are fairly thick metal which makes me feel like the tv is secure even when fully extended. The joint off of the wall and between the two arms are great and can be easily adjusted to make them swivel easier or to stay in place. The joint between the second arm and tv is not adjustable and was very tight/stiff and makes it somewhat difficult to move, but hopefully some lubrication will help that. This is the joint that moves the tv horizontally around the last arm. Also, the joint allows the tv to tilt forward and back and to rotatle vertically is is a little tricky and made it difficult to adjust the viewing angle. All in all i'm happy with it. These type of mounts are outrageously priced in retail stores ($40-$70) and this was less than half of that. Definitely worth the money.

Wali-articulating-monitor-extension-wl-1330lm-(office-products) set picture

- . AlexiaGreat low price for a nice tv wall mount. It wasn't too hard to install other than my 1 problem which is why i gave it 4 stars instead of 5. The top screw & anchor kept slipping out about 1/2". I tried but the screw wouldn't tighten but rather just spun around. About 1/2" out it would catch though so i put a bunch of washers i had on it to fill in the gap so now it's tight. If you had a stud or some other wood to screw it to this wouldn't be a problem though.

Bought this for the tv/dvd combo in our camp trailer. Mounted it today and am completely satisfied but i need to reinforce the panel that it is attached to. After that it will be strong and supportive for the 21" tv. Set it up to fit inside an open shelf and pull it out when we need it. Off the table now and my wife is very happy. Me too!

Z. Sally, Wokingham

Brand :    wali
Color :    Black
Size :    13-inch to 30-inch TVs
Weight :    2.00 pounds
Model :    WL-1330LM
Quantity :    1
Order click here :    normally ships in 24 hours
Speakers :    Best Office Sales (wali product review) for WALI TV Wall Mount Articulating LCD Monitor Full Motion 14 Extension Arm Tilt Swivel Most 13 15 17 19 20 22 23 24 26 27 30 LED TV Flat Panel Screen VESA 100x100,75x75 1330LM available ( Apr 2020 )
Price :    $11.75 (was $11.99)
  • Fully adjustable: +/-15 degrees tilt; 180 degrees swivel and 360 degrees rotate for better-viewing flexibility.
  • Space save: places tv just 2 inches from the wall to enhance the look of ultra-thin led tv. extends up to 14" from the wall for the space saving.
  • Compatibility: full motion heavy duty wall mount for most 13 to 30 inches flat panel display up to 33lbs, with vesa 75x75mm to 200x200mm. detail: 75x75mm(3"x3"), 100x100mm(4"x4").
  • Package includes: 1 x wali articulating wall mount, 1 x mounting hardware kit, 1 x user manual, 10 year protection
  • Installation: 5. 9" x 1. 6" wall plate can be mounted on any vertical wood studs, brick, or concrete wall (do not mount on drywall alone).

TV Wall Mount Bracket, Full Motion Swivel 15 Extension Arm Most 13 to 30-inch TVs

Very sturdy and nicely made. The tilt up and down is a center bolt so only one position with out undoing the bolt. In my house i work standing up or sitting, so the tilt isn't quite the best for my use. Great product though.

The full motion tilt and swivel tv wall mount that makes watching tv unmatchable basics hardware's full motion tilt and swivel tv wall mount bracket upgrades experience on watching tv or placing monitors, without effort. Not only it holds the tv steadily in place but makes your viewing experience much better providing always the best viewing angle. Its flexibility offers a full motion 360-degree rotation, a 180-degree swivel and up to 15-degree tilt. Say goodbye to glare bothering you while you watch your favorite shows. Designed to fit most 13 to 30 inch led, lcd, oled or plasma flat screen tvs, or even monitors. All that while holding up to 15 kg/33 lbs. Capacity. This wall mount also comes equipped with the mounting hardware it requires, along with a bubble level to help you find the exact position during installation process. Includes easy-to-follow instructions. Specs: the tv mount fits vesa - mounting hole pattern: 100x100mm and 75x75 color: black product extends from 2 to 15-inches package measures: 9. 7 x 1. 8 x 7. 4 inches

TV Wall Mount Bracket, Full Motion Swivel 15 Extension Arm Most 13 to 30-inch TVsBracket-Motion-Swivel-Extension-30-inch

Bracket Motion Swivel Extension 30 Inch (Basics Hardware) FAQ.

I installed this in my semi with a 22 in tv. Works perfect! -Notice from L. Ruff, Rhode Island

Click to Show bracket motion swivel extension 30 inch (basics hardware) Details

Great for the price, had to buy new screws as the ones provided were too long, hitting the wall block, but not the products fault. Works well for my small 19 inch set in my office for that mlb game while on he pc.

Bracket-motion-swivel-extension-30-inch-(basics-hardware) set picture

- F. CunninghamWell made unit, i bought the wrong one, needed a bigger mounting surface for the screen, so had to send back, but it was perfect and good quality otherwise.

Good value for under $11. Hardware was tricky. Had to use two washers to get tv secure. Compared to prices i saw at stores this did just fine.

W. Sandra, Lewisham

Price :    $13.95 (was $17.95)
  • Smart and subtle design fits most flat-panel tvs from 13" to 30" with full motion tilt and swivel to reduce glare and assure you the best viewing position
  • Assemble it in a few minutes, just follow instructions for easy install process; includes hardware kit and integrated bubble level for alignment
  • Vesa compatible on 100x100 and 75x75 hole patterns; designed for smaller tvs so bracket won't be visible from behind the tv
  • Sturdy reinforced steel structure with weight capacity of 33 lbs. ; strongest most reliable brackets construction
  • Adjustable +/-15 degrees tilt; 180 degrees' swivel rotation. extends up to 15" from the wall
Brand :    basics hardware
Color :    Black
Weight :    2.25 pounds
Model :    X0220A
Quantity :    1
Order click here :    normally ships in 24 hours
Speakers :    Best Ce Accessory (basics hardware product review) for TV Wall Mount Bracket, Full Motion Swivel 15 Extension Arm Most 13 to 30-inch TVs available ( Apr 2020 )

Axess 15.6-Inch LED HDTV, Includes AC/DC TV, DVD Player, HDMI/SD/USB Inputs, TVD1801-15

Sleek and loaded with features which include 1366 x 768 max resolution for a sharp viewing experience. A 16:9 aspect ratio. A built in digital and analog tuner to catch your favorite programs. 12v car cord technology for viewing on the go. This 15. 6 led television with built in dvd player offers great performance and function in a well designed package.

Axess 15.6-Inch LED HDTV, Includes AC/DC TV, DVD Player, HDMI/SD/USB Inputs, TVD1801-15Axess-15-6-Inch-Player-Inputs-TVD1801-15

Brand :    axess
Size :    15.6 inches
Weight :    0.15 pounds
  • 12v car cord technology
  • Full function remote control. this product only has a ac power supply. power supply:power supply
  • Max resolution: 1366 768
  • Contrast ratio is 800:1. it is wall mountable, wall mount not included
  • Built-in cable/antenna rf jack, audio/video, pc-rgb (vga), pc audio jack, usb input, hdmi port, earphone audio jack, coaxial output jack, cvbs input
Price :    $141.07
Model :    TVD1801-15
Quantity :    1
Order click here :    normally ships in 24 hours
Home Theater :    Best Television (axess product review) for Axess 15.6-Inch LED HDTV, Includes AC/DC TV, DVD Player, HDMI/SD/USB Inputs, TVD1801-15 available ( Apr 2020 )

suptek full motion adjustable tv wall mount rotation, swivel and tilt tv arm bracket for most 15-27 inch led, lcd monitor and plasma tvs vesa 75,100 ma2720 Price : 13, was : 0 as 2018-12-28
United States
Great Britain
World Wide
Suptek Adjustable Articulating Rotation Ma2720 (Computer Add On) Reviewed by on

Top suptek adjustable articulating rotation ma2720 (computer add on) Content

The F.A.Q. for suptek full motion adjustable tv wall mount rotation, swivel and tilt tv arm bracket for most 15-27 inch led, lcd monitor and plasma tvs vesa 75,100 ma2720

I loved that there were several mounting options available with this purchase. I had a handyman install it for me, and he said that it was fairly easy to install. It's extremely durable and is used to hold a 43" television level in a space that the tv doesn't quite fit in to. The price was right and i am a happy customer. Thank you!

A number of questions have been asked here.

Showing 20 Q&A on Suptek-Adjustable-Articulating-Rotation-MA2720

(0) Question: Ho do you attach this to the computer monitor?

(1) Question: Will the brackets reach to a 26" span

(2) Question: Can i mount to the wall horizontal so extends up and down instead of out and in?

(3) Question: Do i need to use the concrete anchors if i am mounting it to a stud in drywall?

(4) Question: How long is the arm?

(5) Question: Does this mount on one or two studs?

(6) Question: What is the fully extended measurement from the wall mount plate to the front face of the vesa mount?

(7) Question: What's the distance between the two screw holes on the base that mounts on wall?

(8) Question: Will this mount with a lg 25um58-p 25. 0" 2560x1080 75hz monitor?

(9) Question: Does this mount tvs that are vesa 300x200?

(10) Question: Does this mount have a way to detach the plate that goes onto the tv from the mount to make it easier to mount?

(11) Question: I have a 5. 8kg 31. 5" mountor with vesa 100x100. should i use suptek ma2720 or ma2770-3260?

(12) Question: What is the distance mounting plate screw holes ?

(13) Question: How far from the wall does this extend?

(14) Question: Does this mount come with spacers?

(15) Question: What are the dimensions of the wall plate?

(16) Question: Does it come with mounting screws?

(note) Question: where/how to get Suptek (manufacturer's brand) accessories & similiar Suptek's products

Click to Show/Hide the Answer

Click on the marked text to copy to Clipboard

The tv mount itself is great. Strong, adjustable, very nice. But the installation instructions are wretched. Fortunately for me, i'm handy/mechanically inclined, so i figured it out fairly quickly. But if you are use to an "ikea" level of instruction, you make want to go for another one. But this one is so cheap and of such good quality, it's hard to pass up. Here's a tip-it comes with a large variety of machine screws, most of which you will not use. They are there to be universally able to adapt to whatever tv you have. Also, it's best to first mount a small piece of plywood into two studs, then mount the tv stand onto the plywood-so that you know the stand is ultimately mounted into studs, not sheetrock. The stand itself has a bit of weight as does your tv, so you will want it screwed into studs if possible. I used three 1/4-20 machine screws that were received by three matching t-nuts on the other side of the plywood. I counter-bored the t-nuts about an 1/8 inch deep with a 7/8 inch forstener bit, and mounted the plywood on the wall with four 2" 10 sheet metal screws. Centering this bad boy on the plywood (and over your viewing area) was a bit of a trick. Most of my time was spent measuring and calculating. I wish i remembered the key measurements but i don't, and sadly the instructions won't tell you either. Good luck!

Accessories & Supplies 704182, Audio & Video Accessories 235271, Electronics 282271, TV Accessories & Parts 466271, TV Ceiling & Wall Mounts 697067Top Suptek Adjustable Articulating Rotation Ma2720 (Computer Add On) FAQ Content

Best suptek adjustable articulating rotation ma2720 (computer add on) in review

Got this mount yesterday and had my 32" tv installed within 15 minutes. It comes assembled and the operation of the arm is smooth and sturdy. Once it was installed i tested it by pulling down pretty hard and it felt solid. The instructions aren't much to speak of but its pretty straight forward. Mount the screws into a stud and attach the tv. I did it by myself but a 2nd person could have made it a little easier. . The plate that is attached can accommodate tv screw spacing of up to 200x200 and the kit comes with arms that can be attached that will accofare up to 400x400 for larger tv's. (most tv specs will list the spacing) my 32" was 200x100 so there was no need for the extended arms. There are finger adjustable screws to tweak the tv position once it's mounted which is convenient. . Not sure about the other review that says it fell off the wall. I have to assume it was mounted to the wall incorrectly and not in a stud. The kit comes with drywall anchors but i'd assume most people understand that's not going to cut it. Not sure why they would even provide them. . The cheapest mount i saw at the local box store was $40. This was under $17 and delivered to my door in 2 days. Great mount and a great price. Thanks online store.

G. Claudia, Oldham

You might like to see Recessed pro-power kit duplex receptacle straight blade datacomm electronics recessed pro-power kit duplex receptacle and straight blade inlet is used to install power and low voltage cables behind your wall mounted flat panel tv, amplifier, -datacomm electronics 45-0024-wh recessed pro-power kit duplex receptacle straight blade inlet
  • Value: 15 Amp / 125 Volt Tamper Resistant Duplex Receptacle Allows Power To Be Installed Behind A Wall Mounted Tv Or Similar Application.
  • Value: Metal Mounting Wings Are Attached To The Top And Bottom Plates And Fasten Against The Drywall As You Tighten.
Inexpensive Datacomm Electronics 45 0024 Wh Pro Power Receptacle (Ce Accessory) 45 0024 Wh Datacomm Electronics 45 0024 Wh Pro Power Receptacle (Ce
Or you might like to consider Lcd/dlp low profile universal projector mount 3 low the universal projector mount by silver ticket products is a durable, well-designed, adjustable projector mount intended to fit all types of both old and new projectors. its simple -str-mountsb silver ticket products lcd/dlp low profile universal projector mount 3 low profile
  • Featured: Completely Universal Design Includes Four Versatile, Extendable Arm Components.
  • Featured: The Included Washer And Thumb-screw Adjustment Allows Tool-less, No-slip Alignment Of Any Projector.
Affordable Str Mountsb Silver Ticket Products Universal (Office Products) Str Mountsb Str Mountsb Silver Ticket Products Universal (Office

P. Sarah, Utah says

I'm surprise at the quality if this product at this price point. I own different mounts from high end manufacturer and they can be really costly. I decided to buy this one, reading reviews, and its one stud mounting point and since this one is only going to carry a lighter load 32 in screen that's going to be installed in the bath. The build quality is really good over all. There are cable guides also acts to conceal them. Also micro adjustment of tilts work very well.

K. Edith, Baden-Wuerttemberg

Bought this for a 23" tv i wanted to install in my bathroom & i am very happy with the results! i gave 4 stars because the mounting hardware it comes with is crap! do not waste your time even trying to use it. I knew i needed to use drywall anchors (not on a stud) but the ones provided are total junk. The bolts/screws provided are to small for the drywall anchors provided. They just spin once installed & would have pulled out of the wall. Do yourself a favor & just go buy some quality anchors & bolts/screws at lowe's or home depot for the weight you need. My tv is smaller & light weight & this is what worked for me. Spend a few extra dollars & minutes to do it right. I used my drill, 10mm drill bit & small hammer to tap in the drywall anchors before screwing in the bolt/screws. I still need to hide the wires but i just finished & you get the idea. Worth the $12 for sure! oh & it does tilt if you loose the rotating bracket on the back. I'm a blonde & a girl. This wasn't hard at all!

E. Newell, Mississippi says

Very little assembly required. However, the supplied bolts (m8x30) and spacers were too short for my samsung nu7200 tv, which caused me problems to install it. I had to make a trip to home depot for m8x45 bolts plus some washers. I can t comment much about durability. It does appear to be quite robust, with no play in the main articulated arms and just a little play in bracket that attaches to the tv.

Y. Walsh, Victoria

Haven't had a chance to install it yet due to moving around surge protectors. The quality though is very solid, the cable management velcro is a bonus. . Once i mount my monitor i'll leave a better feedback response, oh and the instructions are very straight forward and all screws are nicely separated. . Edit 4/30/17. . Finally installed the mount, went on like a breeze. Looks fantastic, very sturdy. Epic cable management, only issue i have is the plastic pins on the cable management plug is a tad flimsy but still holds up the hdmi wonderfully. Also the knock off velcro strips work wonders for keeping extra cables under check, oh and i wish the vesa part that connected to the monitor swiveled up/down a little (10-15 degrees) but not that big of a deal, just upped the font

T. Perez, City of Kingston upon Hull says

This was simple enough to set up by myself, i did need help hanging my tv though, i would say it's almost impossible to hang a tv set on this by one's self. As other reviews state, the included allen wrench was not the right size, i had to use my own tools.

H. Kellie, Sheffield

I mounted this last night with a 39" insignia tv that is less than 1 year old. I used the 200x200 mounting points without needing the adapters. Everything mounted very secure. I placed 1 of my own washers between the bracket and the tv so that the top bolt would not press into the tv too hard. It worked great. . I had previously used a single arm mount that would cause the tv to tip side to side depending on how the tv was positioned. This double arm system is way better and stays almost perfectly level across all positions of movement. . When mounting this, i was pleasantly surprised to find the anchors for use in concrete or drywall (i would not mount the tv in drywall only). My particular mounting location had an extra stud between my 16" on center stud spacing which allowed me to use the outer most holes which just perfectly span 8". Centering the tv mount on a single stud should provide a solid mount as well though. Plus there are additional holes up and down the middle of mount if your tv is toward the large size of the rated range. . The mount is very stiff to move, but we don't move it much. Once it is set in place, it does not move easily, which is nice. . The last very nice aspect is the clips on the mount arms to allow for cable management along with velcro strips and hdmi cable. This really allows for a clean setup with very good stability.

X. Reed, Calderdale says

Works well so far, just put it up. Have to see how long it ll last. But for the price i would buy it again if needed. I did have to buy a set of screws to match up to my monitor. I also expected that with the monitor i have. It wasn t made to be mounted to a wall but i custom fit it. I do buy a lot of stuff that i have to make into my own anyway. I did match it up to my small flat screen tv perfectly. Considering the price and the quality of material looks real durable i had to give it a 5 star review.

I. Cecilia, Wokingham

We adapted this arm to hold a computer while we do exercise in the basement. We attached it to a wall, making sure it was screwed to the wall studs. (we didn't use the plastic anchors because the screws were firm inside the stud). We put a rack in an l shape where we could put the computer to watch videos. So far, it has been a week and it's great. Installation was easy.

. Sheila, Kensington and Chelsea says

This review is for the suptek articulating arm tv lcd monitor wall mount. . Packaging was simple and the box it arrived in was small, both of which are things i like. The installation instructions were straight-forward. Mounting the monitor arm to the wall went great. The arm/hinges are stiff, yet movable. I had some issues with mounting the vesa adapter to the monitor. The provide screws were about half a cm too long and there were no spaces or enough washers to make the screws snug to the adapter. This could be due to the monitor being a cheaper korean panel (qnix 27, 1440p). No star deductions for that as including all the different screws and dozens of washers wouldn't help most people with compatibility. I should have checked the monitor before installing. . Attaching the vesa adapter to the monitor was easy, however, the vertically mounted monitor refused to stay put. It will lean to one side at about a 10 degree angle. I tightened the bolt on the vesa adapter, but it had no impact. This could be due to the monitor being unequally weighted and i feel that a horizontally mounted monitor wouldn't have this issue, regardless, i'm taking a star off as i had to rig up some zip ties to hold it vertical. I also saw no mention or mechanism to change the tilt as the product mentions 20 degrees of tilt. I couldn't find out how. One star for that. . Overall, you get what you pay for. This is an incredible price for a monitor mount, however, it does have some issues to overcome.

O. Cassella, Haringey

Given the low price, i was not expecting much, but i am very impressed. I needed to wall mount a 15" computer monitor that fortunately had vesa 100x100 mounting holes (unusual these days) . I have a number of much larger and much more expensive tv wall mounts; this mount, though smaller, is right up there in quality. The mount can be installed without the tv or monitor, then the tv drops right on and is secured with two small screws. Tilting and/or leveling is easy and is locked in place with the supplied wrench. The swivel joints were very tight but easily loosened to the desired stiffness. Overall an excellent mount at a great price!

U. Sally, Oklahoma says

I bought a 24" led tv from best buy. I have no beefs with best buy, but they only have $79 and $99 mounts for that tv. I tried a white mount for about $40 from online store, but the vesa (? ) plate covered the hdmi port, so i returned it. This suptek mount seemed to have the least intrusive vesa plate, but at only $10. 99, i questioned the quality. I ordered it anyway and it is perfect. Easy to install, adjusts in all directions, and is beefy enough for my tv and then some. They are giving this away, folks. Picture isn't the best, but you get the idea.

R. Morgan, Prince Edward Island says

Great quality product, its holding my 50" samsung uk6300 tv, super fast shipping, i am very satisfied.

A. Franklin, Michigan

This is a really good bracket. It tilts and swivels. The hardware that comes with it is really durable. It has everything you need to do the install. A few things, though. If you plan to rotate the monitor, be sure to measure the diagonal distance from the center to one of the corners of your monitor and add 1/8" for sag. Likewise, if you plan on upgrading the monitor to a larger size, you will have to reposition the bracket on the wall. It cannot move up and down, which would have been a nice feature. Make sure the cross plate fits flush on your monitor; i had to bench grind down some material near the screw holes to fit my 5+ year old off-brand monitor to make it fit perfectly, but this is surely not going to be an issue for modern monitors. Last, you should pre-play with, then tighten the center bolt 1/2 turn prior to installation, to make sure it's plenty stiff to resist "gravity assisted auto rotation, " my words for it. I got it all on, then the monitor spun like a pinwheel in the wind, so i had to take it all off, tighten, then put it all back on. . Anyway, i wish i had mounted my monitor years ago with this. It's really sturdy, and now my workplace is da bomb.

N. Shawna, Cheshire says

This wall mount product is more than study enough to handle our 60" tv. The weight is rated at 100lbs ours is 50. It fit all the connections on the tv perfectly. This was what we expected, but we were very impressed with was how each of the screw types were packed separately along a strip of plastic so you could see exactly what you had and a couple of small levels were actually included for accurate installation. Our studs were not in the right place so we had to mount a cross brace connection between two studs and mounted it on the wall. Very satisfactory.

Z. Palmer, Massachusetts

Just received it today and it is now installed and working great. I have it in my young (7years) son's room with an online store fire stick so he is all set. For his fav shows and cartoons. The bracket was fairly easy to install and his tv only weighs about 15 pounds. I think it is 32" model but i'm sure the suptek bracket will work fine for larger heavier tvs if mounted properly. I would just add a thank you to online store for so many great products for fair. Prices - very easy to see why they are number 1 in online sales and probably now in overall sales. With prime it is so easy to shop and receive in a very timely way.

W. Guest, Slough says

The tv wall mount swivel bracket functions wonderfully. I liked the fact all hardware necessary for me to mount was included it's size was perfect and easy to install and mount. Due to my tv's 23" size & weight, i had to make minor adjustments. One comment stated the angle of the screen was not adjustable however, in truth, it is adjustable. Note: the center nut on the mounting plate needs to be loosened a wee bit to allow the screen to tilt the 15 degrees; up, down, left or right. You'll see a plastic swivel collar on the bolt side of the center nut. All bracket swivel points & pins are extremely tight probably a factory requirement as tv screen sizes & weight will vary. I would recommend this as an excellent value.

C. Sandra, Northwest Territries

I have a 48" tv and this worked perfectly, its quite durable and i was afraid it would be too thin or fragile but its perfect and i trust it wont fall off or anything like that. It comes with different screws so you can find the right one for your tv, it has an expandable base for the back of your tv so it should fit all brands. Its quite easy to handle and to install, overall we are pretty happy with this.

D. Terry, Yukon Territory says

Glad i tried dry-fitting the mount to my tv before i started drilling holes in my wall. I have a toshiba 43" tv less than. 2 years old. It has a weird non-square mounting pattern, 200 mm across by 300 mm up/down. The standard mounting plate fits across but not up/down. I tried different configurations with the extenders but couldn't make them all fit together. More the fault of the tv than the mount; the plate fits perfectly without extenders on my 47" vizio with a 200x200mm. So i'll try it with that i suppose.

B. Cathy, Wisconsin

This was just what i needed for my rv tv install. This came with the hardware necessary to drive this into the wall stud of my rv and is holding up my 19" tv with no issues at all. The small wire management clips beneath the bottom bar don't hold in place quite as well as i had hoped but that is mainly because i am running a coax cable in addition to the regular power cable. I plan to put a couple of cable wraps case logic ct-6 self attaching cable ties (assorted colors) to hold the cables tightly in place. The square steel tubing arms provide substantial strength and i even plan to drill a slot through the top bar and outer arm bar so i can drop a retaining pin in place in order to "lock" the tv in place when traveling. There is nothing about adding these holes that would concern me as far as loss of strength due to the already light but strong construction of the square tubing. With an older, heavier tv that is closer to the weight limit of this arm, your mileage may vary. Finally, although it did not mention in the instructions to do so, i decided to drill a tiny 3/32" pilot hole before driving the provided lag bolts into the trailer's outer stud due to the smaller size vs. An ordinary residential stud. I thought this would help prevent splitting or cracking and had no issues. I also checked to make sure the lag bolts were not too long that they would not poke out the outside of the rv. You will want to check this if you plan the same and add extra washers to the bolt to shorten the amount of bolt that goes into the wall. The kit also includes concrete lag shields but i had no use for them in my application. The only extra thing that might be useful if you're installing this yourself would be to get a magnetic torpedo level stanley 43-511 magnetic shock resistant torpedo level. This is especially useful if you're installing this in an rv like me since you can toss the magnetic level in your rv's tool box to give you another level to make sure your rig is level when you get to your campsite. Just be sure your rv or camper is already level before expecting a good reading from this wall mount. The bottom bolt hole is flared wider than the top to allow you to adjust the level and tighten it in place once located. We've used this mount a couple of times already and are expecting it to outlast the tv we installed on it. I definitely recommend this product.

M. Courtney, Oklahoma says

Mount is very sturdy and built in cable management is a nice plus. The only issue i have is the mount does not center over mounting location when pushed all the way back againts the wall. It is off center by a couple inches. This was an issue for me mounting over fireplace as wall stud was dead center of fireplace. I now have to pull tv out from wall to center it or live with minor, but noticeable, asymmetry. The price of this unit offsets this design flaw. I would still recommend this, just be mindful if exact centering is wanted for your installation.

Top full motion adjustable tv wall Review

Disadvantage and Critical reviews

N. Dorothy, Gloucestershire says

Swivel becomes lose after install, if you install it and don't move it much it's fine. Just tried to uninstall and reinstall it some where else and the swivel has no integrity left. Don't plan on moving it ever.

I. Campbell, Kentucky

I have a tv that this product was not designed for with a 200x400 vesa pattern. I had to attach the extension arms with two reversed to mount my tv. Problem here is that the weight is now significantly off to one side. The company was helpful in trying to resolve my issue which was completely due to my tv being weird. As long as you don't have a 200x400 tv, i would highly recommend this mount. The hdmi cable is a 1. 4 apparently. One note, the mounting template is printed backwards from any reasonable expectation. Double check everything before poking holes in the wall and you'll be fine.

A. Helen, North Dakota says

Construction is decent. Didnt use the included mounting hardware. Monitor screws were too long and monitor was loose and i mounted the arm to the side of a hutch on my desk so i used machine bolts. Only gripe is the monitor rotation gets loose quickly. I rotate my 2nd monitor from landscape to portrait every now and then and the bolt gets loose after a couple of turns and the only way to tighten is to take the monitor off completely.

. Wells, Dorset

Cheap and a piece of crap. I'm giving it 1 star due to the frame being crooked. Slants on the left when looking at the t. V. And was professionally put up. I will never buy from this person/company whatever again! dissatisfied!

K. Joanna, Newfoundland and Labrador says

The arm itself is ok, but the tilt mechanism kinda sucks. If it's too loose the tv flops forward and if it's too tight you can't adjust it at all. There's a fine line between the two and you have to completely remove the tv to adjust it.

M. Ross, Southend-on-Sea

I bought this to mount a 10" screen and found that the aluminum plate that mounts to the back of the monitor was just too large and reached to the edge of the monitor covering the control buttons for the display.

U. Erin, New Hampshire says

Its an ok overall mount, good for a simple one time install and forget it situation - like a kiosk or display. The reason i say this is because the up down/left right adjustment behind the monitor is kind of cheezy - think of two 1/2 shells pressed together with a bolt going thru them, relying on friction to hold them in place not a actual hinge/pivot mechanism. . As stated good for a simple display but not good for a desk where multiple users will be re-adjusting the arm

. Finch, Sutton

Piece of junk! once the tv was mounted i was terrified of moving it. Hate it! best part, this thing killed my tv. Ir just dropped it onto yhe floor and killed my new tv

Y. Mathis, Berlin says

Our it company has bought 6 of thes. They are cheap and garbage. The mounted screens, fall tilted forward because the re is no adjustment for preventing the screen from tilting forward or backward so it just sloped down, very annoying. We would return them all if possible.

P. Hayward, Calderdale

The description says up to a 55 inch tv. The mount i received was only up to 50 inches. Very disappointing. I would not have ordered if i knew this.

G. Watson, Ontario says

Holy crap, it's amazing how many people cannot read simple instructions. It comes with big self tapping bolts and brick anchors, it tells you clearly to use a 4mm drill bit if mounting to a stud, and a 10mm masonry bit for brick mounting. So many 1 star reviews complaining that it came off the wall, and they clearly installed it in drywall. You don't mount a monitor to drywall! . . For $11, this product is wonderful. Mine came with an uneventful mount too, but sure enough it just leveled when i tightened it to the stud, not a defective unit at all. . That said, i'm taking two stars off for false advertising, because the picture clearly says 120 tilt up and down, but it does not tilt at all.

L. Wayt, Washington

This product came with wrong template. You are better off using product directly as a template. Put it on the wall and mark the circles. Product looks sturdy.

. Tracey, Utah says

I purchased less than 2yrs ago. I could tell after a few months that the top seemed to be strained. I was adjusting it and the top came out of the wall. Additionally, the template to install it is backwards.

Z. Dorine, Tower Hamlets

Works well but i seriously almost broke my monitor trying to get this thing to tilt. Had to rotate the entire monitor upside down, tilt the other direction, then flip 180 to use it. It would not tilt in two directions like it shows in the image. Also the piece that goes on the monitor and connect to the arm is not straight either its crooked. Probably why it doesn't tilt freely in all directions. The little plastic cable organizers are too loose to secure any wires like for headphones, speakers, etc. Had to use the extra cable organizers they added in but it looks tacky on the arm like that.

J. Betty, Cumbria says

I don t understand why the screw is too small for the anchor. Or why the mini wrench doesn t fit the screw head. So needless to say we have not been able to properly assemble the mount into the wall and will have to buy the right hardware

F. Lindsey, Maryland

Was very compact and looked good, but does not fit the back of my tv. States that it fits 15-27" tv, but the mount was way too small

. Colleen, South Tyneside says

Very poor design. As you can see in the photo (maybe, it's hard to capture), the bracket is split into two parts: one that securely mounts to the wall, and one that securely mounts to the tv. However, when you attach these two parts together, you do so with just two very small bolts and circular hand-tighten-nuts. These are not solid enough to support the weight of the tv, it ends up very wobbly. . I would suggest that you purchase the "echogear full motion" mount instead, it's got a very similar price point, and the mounting design is almost identical to this one, with the exception of this flaw! the echogear is a one-piece design, so it is rock solid.

T. Glenda, Delaware

I had to grind off the corners of the x-mount to fit with my hp 2159m monitor. See photo. The hole locations fit, but the x brace didn't. I looked at the dimensions before-hand and it should have fit.

R. Aldana, Wisconsin says

I bought a used one and for the price i cant really complain. The wall mount i received didn't look like the one i ordered. It didn't have a single swing arm but a dual so it it wont go as far as i wanted it to. Overall the wall mount works perfect and holds up well for what i need it for.

S. Broyles, Hammersmith and Fulham

Sturdy mount that is easy to install. The main downside is that it doesn't have an easy front to back tilt option. It can be adjusted, but only by first removing the monitor from the bracket. If it could be tilted front to rear as easily as it can side to side this would be a much improved product.

V. Bullock, Haute-Normandie says

I purchased this on a daily deal and regret not looking into it more. . No list as to what tvs it fits and this did not fit my vizeo television. Wish there was a list so i didn't buy this hoping it would fit.

E. Marguerite, Warrington

Super cheaply built and is really so dinky that it hardly angles nicely. It is nice metal but really small and ghetto looking. Not really worth the price.

C. Bethany, Poitou-Charentes says

It is a decent mount. It should have come standard with vesa size 200 which the 32 inch tvs come with. I paired it with an adapter plate to do so. I needed a lighter mount for my 32 inch t. V. Which weighs less than 10 pounds. The mount for the tv is not removable like other mounts to make installs easier. I had on hand four screws with large knobs to install the tv to the plate.

D. Bertie, Doncaster

The item received on time and install it for my samsung 26" tv . I can not rated more than 3 stars due to the including mounting screws on tv 200mmx100mm was too big / did not to fit my tv. I have to buy proper mounting screws(small size 4 ea) from local hardware store. The wall mount hardware was well built. Instruction manual was useless. !

W. Monique, Wyoming says

Seems to hold up my monitor with no effort, does not wobble unless fastened incorrectly. One major problem, and complaint, i would bring up is this:. The template this company sends with the box is backwards, i drilled the holes from the template into my wall and when i brought the metal mount up to screw it into the wall, the hole positions were reversed. I went to check the other box to see if that single mount was defective, but apparently the template is wrong on all of these products. . Other than that it works fine; unfortunately i have a nice set of 4 unusable holes in my wall now, and i'm taking off a star per hole. Now i have to go patch it up with drywall because they couldn't bother to send a notice or even an email, even when they have to know that every single one of their mounts must be like this.

Q. Annette, Wandsworth

*first thing* go to lowes or homedepot and buy lag bolts from them. The ones that came with the mount are clearly not of high quality and would probably not function well. The lag bolts would only be a couple dollars max. . Also make sure you are mounting this into studs, as using wall anchors is not only dangerous in general when mounting a tv/monitor due to sheet rock on its own not holding weight well, but due to what appears to be a warping defect on these units. . Now for the cost of the mount of around $12, these were a pretty good option. I purchased two of them to mount my 22 inch monitors in my office. . The back plate was in fact warped and did not sit flush to the wall (as some other reviewers mentioned). This however was not a trouble since i mounted to studs. Measured out, made sure it was level to mark mounting holes, drilled the pilot hole, and then mounted the top one. Once that was secure in place, make sure to level out again and just used my ratchet wrench to tighten down the bottom until it was flat. Worse case here is the sheet rock dents, but not an issue as long as the mount is securely in place. . The only additional trouble here would be the tilting mechanism. Having to loosen the bold on the backside and tilt down and then re tighten was somewhat cumbersome. It worked, but took several attempts. . The monitors however are securely in place, and there is little to no wobble. They are harder to move around, but since in my situation the position they are in is where they will stay, i prefer that so they don't accidentally move. . After using my own hardware, i say this is a great purchase over the $50-100 local b&m stores are charging.

. Jessica, Richmond upon Thames says

Is not made for a 55" tv at all. way too small.

X. Peggy, Newcastle upon Tyne

Product wasn't bad and only took minutes to install. No directions came with it and i had to buy different screws to mount it to the tv. The ones provided were about 1" long and i needed 3/8" long ones.

Leave a Reply

You must be logged in to post a comment.

Back to Top

Related Products

  • On Sale
    Fleximounts Motion Articulating Swivel Bracket (Home Furniture And Decor)

    Fleximounts Motion Articulating Swivel Bracket (Home Furniture And Decor) 2234

    Get Discount Fleximounts Motion Articulating Swivel Bracket (Home Furniture And Decor), Full motion articulating tv wall mount tilt swivel bracket 17'-42' lcd led hd plasma description: this fleximounts v1 full motion tv wall mount offers an attractive way to display a tv while also providing the most flexible viewing options. the arm can easily be adjusted, -fleximounts full motion articulating tv wall mount tilt swivel bracket 17'-42' lcd led hd plasma tv
    • Used a set of these for mounting speakers on far side of pool cage allowing me to swivels 180 degrees for entertaining in other areas of back yard. Solid construction and plenty of adjustments for precise positioning. I am sure they would work great on a smaller tv
    • Value: Check Your Tv's Wall Mount Pattern Size (vesa Size) Before You Purchase Any Tv Wall Mount. Available Vesa Size: 75x75mm(3"x3"), 100x100mm(4"x4"), 200x100mm(8"x4"), 200x200mm(8"x8").
    • Value: Tilt Angle:-5-10 Degrees. Our Mount Can Tilt Andswivel, Making It Easy To Find The Best Viewing Angle And Reduce Glare From Lights Or Windows.
    Bargain Fleximounts Motion Articulating Swivel Bracket (Home Furniture And Decor) 4330178197
  • Bestsellers
    Mounting Dream Bracket Articulating 400x400mm (Av Furniture)

    Mounting Dream Bracket Articulating 400x400mm (Av Furniture) 2318

    Half Price Mounting Dream Bracket Articulating 400x400mm (Av Furniture), Md2379 Tv Wall Mount Bracket 26-55 Inch Led, Lcd, Oled Plasma Flat Screen Tv Full Motion Swivel Articulating Dual Arms Up To Vesa 400x400mm 99 Lbs Fits 26-55" Tvs This Mount Fits Most Of 26-55" Tvs Sold Today. It Fits Tvs Mounting Holes As Close As 3"x3" Or As Wide As 16"x16" (in Tv Terms - Vesa 45x45mm To 400x400mm). Specifically, -Mounting Dream Md2379 Tv Wall Mount Bracket 26-55 Inch Led, Lcd, Oled Plasma Flat Screen Tv Full Motion Swivel Articulating Dual Arms Up To Vesa 400x400mm 99 Lbs Tilting
    1. I love this mount. Most of the time, my tv sits flush against the wall out of the way. When i want to watch it, i rotate it to face my bed or the other side of the room. It has a lot of versatile right and left movement. Also, you can adjust the up and down but it must be fixed in one particular dir... go to
    2. Supplementary: Viewing Becomes More Comfortable: Tilts Tv Up 5 And Down 15 To Reduce Glare, Swivels Tvleft Or Rightaccording To Your Seats Position. Pull Out To 14 And Retract Back To 3, Making Your Tv Alive To Move.
    3. Supplementary: Easy Installation With Decent Instruction And All Included Hardware In Pre-labeled Bags. +/-3post-installation Adjustment Allows Perfecttv Leveling. Comes With 6 Hdmi And Bubble Level As Gifts.
    Sale Mounting Dream Bracket Articulating 400x400mm (Av Furniture) Fba Lysb00sfsbhw4 Electrncs
  • Half Price
    Echogear Articulating Computer Featuring Extension (egsf1 bk)

    Echogear Articulating Computer Featuring Extension (egsf1 bk) 935

    Very Cheap Echogear Articulating Computer Featuring Extension (egsf1 bk), Full Motion Articulating Tv Wall Mount Bracket 15-39 Inch Tvs & Computer Monitors Featuring 10.5 Extension, 90º Swivel, & 16º Tilt - This Versatile Articulating Monitor Mount Allows You To Mount Small Screens Almost Anywhere. Perfect For Both Tvs & Computer Screens, You Can Create A Home Office Or Gaming Setup -Echogear Full Motion Articulating Tv Wall Mount Bracket 15-39 Inch Tvs & Computer Monitors Featuring 10.5 Extension, 90º Swivel, & 16º Tilt - Egsf1-bk
    1. Folds back to fit close the the wall and i can adjust it to meet my needs. I would buy this again. It is well made and i do believe it will have a long life.
    2. Bonus: With 10. 5" Of Articulating Extension From The Wall, You Can With Swivel This Mount Up To 65 Degrees To Ensure Your Tv Is Facing You, And Not Your Spouse, During The Season Finale.
    3. Bonus: The Single Stud Design Makes Mounting In A Corner Or Rv Simple. Comes With Easy To Read Instructions And Simple Install That Takes Under 30 Minutes.
    Top Rated Echogear Articulating Computer Featuring Extension (Computer Component) Egsf1 Bk
  • Today's Deal
    Bracket Motion Swivel Extension 30 Inch (Basics Hardware)

    Bracket Motion Swivel Extension 30 Inch (Basics Hardware) 907

    Show Details Bracket Motion Swivel Extension 30 Inch (Basics Hardware), Tv wall mount bracket, full motion swivel 15 extension arm 13 to 30-inch the full motion tilt and swivel tv wall mount that makes watching tv unmatchable basics hardware's full motion tilt and swivel tv wall mount bracket upgrades experience on watching -tv wall mount bracket, full motion swivel 15 extension arm 13 to 30-inch tvsBest Price Bracket Motion Swivel Extension 30 Inch (Av Furniture) X0220a

Product Image Gallery