Videosecu Articulating Bracket Plasma 400×400 (mw340b) 983

Review for articulating tv wall mount bracket

Price was $32.99. Easy to install on a standard wall. Came with all the needed hardware and looks great. With a 55" flatscreen there is a good range of motion and it can be pulled out and turned to the side about 85 degrees. The design also allows me to push the unit back nearly flat since the arms collapse into the frame. It holds its position easily. Maybe a bit too well since it does require considerable pressure to move and i find myself a bit concerned about breaking the screen when manipulating from the corner or edge. I have been gripping top and bottom at the same time to avoid stressing the screen. I was able to get the screen much more flush with the wall by routing all the cables through a hole in the wall behind the center of the tv. If this isn't an option the arms may be a pinch point on cables and will not permit full retraction.

-X. Wayt

Articulating Tv Wall Mount Bracket 26 -55 Lcd Led Plasma 3d Tv Vesa Up To 400×400, Full Motion Tilt Swivel Dual Arms The Mw340b Makes It Easy To Wall-mount And Position Your Led Lcd Tv. This Full-motion Bracket Can Support Most Tvs From 26″-47″ And Some Up To 55″ Display Vesa Mount Hole Up To 400×400 -Videosecu Articulating Tv Wall Mount Bracket 26 -55 Lcd Led Plasma 3d Tv Vesa Up To 400×400, Full Motion Tilt Swivel Dual Arms Bd4

  1. Items: Steel Construction, Supports Tv Up To 135 Lbs. , Mount To Wood Wall Studs Up To 16″ On Center.
  2. Items: Minimum Mounting Profile 4. 3″, Extends To 16″; Adjustable Tilt 15 Degree Forward Or 5 Degree Backward; Swivel 160 Degrees.

Inexpensive Videosecu Articulating Bracket Plasma 400×400 (Av Furniture) Mw340b

Buy Now

Foreword

I selected this mount for three reasons, price, specs and, of course, that it was online store prime eligible, important for a relatively heavy item. However, on receipt, though it met the three criteria, i found it to be a truly superior full-motion mount. This is the sixth mount in our house, the fourth full-motion mount. Two factors make it stand out from its competition. First, it offers about six degrees (+/-) of adjustment to level the mounted tv. This has always been a pain to accomplish with these two-arm wall mounts, even when the wall plate is dead level. Although you need two different hex wrenches, it is easy to do. Just be sure to pick out the required sizes before you mount the tv; it is easier than reaching up (or down) behind the tv, blindly trying wrenches until you find the right size! secondly, the tilt adjustment is very easily made using two cam-lock levers, so much better than hard to get at knurled knobs. Lastly, note that although the mount fits up to vesa 400 x 400 tv sets (which strangely i needed for a 42" lg) you will have absolutely no wiggle room either in the vertical positioning on the mounts on the tv, or left-right placement of the hangers on the bracket's mounting rail, essentially because 400 x 400 maxes out the mount, so plan ahead. In summary, this is the best mount of its type that i have ever found. Best articulating tv wall mount bracket | Videosecu-Av Furniture Review ( Sep 2019 ) Items VideoSecu Articulating TV Wall Mount Bracket for 26"-55" LCD LED Plasma 3D TV with VESA up to 400x400, Full Motion Tilt Swivel Dual Arms BD4 Fit 26" 27" 32" 37" 40" 42" 46" 47" 50" 52" 55" display with vesa up to 400x400mm(16"x16"). Steel construction, supports tv up to 135 lbs. , mount to wood wall studs up to 16" on center.. Minimum mounting profile 4. 3", extends to 16"; adjustable tilt 15 degree forward or 5 degree backward; swivel 160 degrees. Post installation level adjustment allows tv to be level after mounting. Common hardware pack included in the package .

Videosecu articulating tv wall mount bracket for 26 -55 lcd led plasma 3d tv with vesa up to 400x400, full motion tilt swivel dual arms bd4 Review (mw340b)

Bought this to hold up a 40" lcd tv, it was a very simple mount as it gave me just enough space to get the bolts into studs on both sides of the mount. I adjusted the slide to one side so the tv was where i wanted it to be (offset on the mount) and was able to adjust the tilt as needed. If you need to get behind the tv its easy to just pull it away from the wall and do what you need and push it back, you don't have to remove the tv at all! the last mount i bought was 4 times as much as this one and had the same features and is just as solidly mounted. Don't spend the higher prices for the "higher quality" mounts as they are honestly the same. -Q. Mary

Videosecu Articulating Bracket Plasma 400x400

  1. Class: Electronics
  2. Brand: VideoSecu
  3. Color: Black
  4. EAN: 4827645007456
  5. Product Dimensions:
    Height:4.50 inches
    Length:18.00 inches
    Width:6.90 inches
  6. Manufacturer: VideoSecu
  7. Model: MW340B
  8. MPN: MW340B
  9. Quantity: 1
  10. Part/Serial Number: MW340B
  11. Type: Speakers
  12. Category: AV FURNITURE
  13. UPC: 791090650298

articulating tv wall mount bracket 26 -55 lcd led plasma 3d tv vesa up to 400x400, full motion tilt swivel dual arms Speakers, The mw340b makes it easy to wall-mount and position your led lcd tv. this full-motion bracket can support most tvs from 26"-47" and some up to 55" display with vesa mount hole up to 400x400 (16 inch apart). the arm pulls out to extend your tv up to 16" from the wall. the mount lets you swivel, tilt it up or down your tv for optimal viewing. this mount fit most brand tv with mounting thread inserts (vesa) 400x400, 400x300, 400x200, 300x300, 300x200, 200x200, 200x100, 100x100mm (16"x16"/16"x8"/8"x8"/16"x12"/12x12"/12"x8"/8"x4"/4"x4"), up to 135 lbs. , common mounting hardware included. Videosecu Articulating Bracket Plasma 400x400 (MW340B-Videosecu).

Videosecu Articulating Bracket Plasma 400x400 Speakers

PROS
  • I don't need to move my tv, but the design makes installing cables much easier, and makes the installation seem more secure than a single stud bracket mount. Read a few reviews of another mount that had broken spacers in the articulating arms. I haven't had this problem with this mount (although i have probably only moved it 4-5 times and fairly gingerly when i do). . I have a plasma 42" tv that uses 400x400 mounting and weighs about 45 lbs. This is about 10lbs more that most 55" led flat screens i'm currently looking at to replace this tv. . The studs in my living room wall were 16" center to center. This maxes out this wall bracket. There are adjustments you can make to the mount to obtain a level tv but as long as you install the wall bracket level the rest of the installation is very easy, except for carefully placing the tv on the bracket. Get a friend to help and don't let your fingers grip the screen (i've seen several tv's with dead areas in the corners broken this way). . I spent the most time verifying that i had found the edges of the two studs (basic stud finder) and that the top holes were going to be level (yard stick and level). Also if you have 400x400 spacing on your tv you have no additional vertical adjustment you'll have to check and double check the distance from the top of your media cabinet and center channel speaker to the center of the mounts on the tv to figure out at a minimum how high the center of the mount should be to clear the speaker. I placed the tv a little high because of the clearance i needed so i may opt for a shorter center channel speaker to bring the seated eye level of the 55" tv i get to about 1/3 the way up the tv. Can't imagine always watching a tv above a fireplace unless i was laid back on a recliner. . For installing the bolts that go into the wall bracket, a drill for making the pilot holes and socket wrench set are useful. I have snapped off similar diameter lag bolts in studs even in properly prepped holes. Not something you want to have happen in this location/height specific install so not forcing the bolt while also obtaining a snug/tight install is important. I drill the pilot hole 1/4"-1/2" deeper than the screw length and wax the screw threads with candle wax. If it starts squeaking going in just back it out, insert a small diameter rod like a screwdriver to make sure the hole that was drilled was deep enough, vacuum out the wood shavings created by screwing in the bolt, and you shouldn't have a problem. . Good luck.
  • Feels very secure; hasn't ripped out my drywall yet (crossing fingers). Only complaint is that i wish the main bracket which you attach the mount to your studs only allows you to bolt it down horizontally; i'd like the option of securing the mount with multiple screws going vertically into the studs. Because of this limitation, i plan to install earthquake straps on the mount itself, just in case. . And as the other users have stated, if your studs are more than 16" apart or don't align properly with where you want to center your tv, you'd better buy a plank of wood to use as a base and go from there. I was lucky and i could just barely get the holes to align to where i wanted to center the tv/mount on my wall.
CONS
  • Now that its up, i love it. But the directions on this wall mount sucks!
  • Warning; this mount is extremely heavy! our 40 inch is about 30 lbs, there was no way it would hang with those anchors. If you want to invest in this, calculate the price of this mount plus 8-10 dollars for the anchors at home depot that hold up to 300 pounds. You have to drill a pretty big hole for those but after installing i could hang on it without feeling it coming loose. Do not under any circumstances use the anchors this product comes with! even if your tv is the minimum size, the mount itself will rip the anchors out of the wall. Otherwise the mount functions how it should and is easy to attach tv to wall.
  • This mount seems to tilt forward a little bit but my brother reinforced it with the supplied bolts and for the past month it has held up without any issues. I worry that one day my tv will come crashing down because of the way the bracket bends. This is largely due to the size and weight of my tv. There is a lot of information out there that says that you can't stop this mount from tilting with the supplied hardware. This is wrong. It can be stabilized if you know how to use a socket set and are familiar with how things work. It has two handle-type fasteners but these must be used with two nut and bolt fasteners in order to be effective. It works for me with my 50" tv but i would only recommend this for 48" and smaller tvs.

articulating tv wall mount bracket VideoSecu Articulating TV Wall Mount Bracket for 26"-55" LCD LED Plasma 3D TV with VESA up to 400x400, Full Motion Tilt Swivel Dual Arms BD4 (Switch to Mobile/Desktop Version)

I went all over the place looking for a tv mount and they are all over $80. This one is the best quality for the best price. I was a bit skeptical at first because it was not through a thirty party seller rather than online store. Com and it did not have any reviews but i am so glad i took the risk. . It has two arms and it comes out very far. It tilts, moves sideways, pretty much adjustable in all directions. Plus, it was easy installing this because there were a lot of hole positions for the studs on your wall. Also, i've never installed a tv mount on a wall before and i found the instructions very easy to follow. I was also happy to have received all the screws and bolts! sometimes, companies cheap out on that or leave or skip a screw, but to my surprise, this even came with a few extras. My studs were pretty far apart and this offered multiple placements for the screws. Great purchase!

Videosecu Articulating Tv Wall Mount Bracket 26 -55 Lcd Led Plasma 3d Tv Vesa Up To 400x400, Full Motion Tilt Swivel Dual Arms Bd4
Click to see NoticeVideosecu Articulating Bracket Plasma 400x400 (mw340b)"Works great. Very sturdy with a 48" and 55" samsung tvs. I wish the rear plate was a bit wider, even just a few inches. It is wide enough to span 2 16" studs with less than 1/2" of wiggle room. So if your studs aren't aligned to the center of the wall perfectly, you will only be able to use one stud which isn't recommended. Also the bolts to mount the plates to the tv were either much too short or much too long even with the thick washers. I had to improvise and add another thick washer to make sure it was secured correctly."

(0) Question: Do you sell just the 2 pieces that attach to the tv?


(1) Question: What is the difference between this and videosecu tv wall mount 32"- 65" lcd led plasma tv flat screen with vesa 684x400 mm, full motion dual arm ar?


(2) Question: Using wall studs, tv is not center with my couch. without having to tilt the tv, can it just be placed offset (not center) by adjusting the swivel ?



Featured Categories » Gold Merchants » Specialty Boutique » Videosecu Articulating Bracket Plasma 400x400 (Av Furniture) Mw340b


Mounting Dream MD2380 TV Wall Mount Bracket 26-55 Inch LED, LCD, OLED Plasma Flat Screen TV, Full Motion Swivel Articulating Dual Arms, up to VESA 400x400mm 99 LBS Tilting

I love this mount! i wanted one with full range and i felt that this mount did a good job providing swivel and tilt options. However, the directions were extremely overwhelming when we opened the box. There are a lot of parts and detailed instructions. I think this is because there are multiple ways you can hang it (using studs in the wall frame or just on solid wall). We ended up modifying the instructions to use our own method. We got it up and i think it looks great in the living room. Very happy with the purchase!

Fits 26-55" tvs this mount fits most of 26-55" tvs sold today. It fits tvs with mounting holes as close as 3"x3" or as wide as 16"x16" (in tv terms - vesa 75x75mm to 400x400mm). Specifically, it fits vesa 75x75mm, 100x100mm, 200x100mm, 200x150mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm. Retracts 3" low profile, extends 15. 2" from the wall with articulating arm, this mount retracts to 3"(to wall) to save space, and extends up to 15. 2" from the wall. Tilt, swivel and rotate function +5 /-15 tilt, +/-45 swivel and +/-3 rotation for maximum viewing flexibility, provide smooth adjustment for all directions, making it easy to view your tv from multi-angles. Heavy duty steel construction, 99 lbs loading capacity constructed with heavy duty steel materials with durable powder coated finish. This mount is 100% welded by automatic robot. This advanced welding technology makes the mount sturdy, and ensures mounted tv stable and secure, supporting tv weight up to 99 lbs. Bubble level and 6' high speed hdmi cable it comes with bubble level and 6' hdmi cable. Hdmi cable supports 3d, ethernet, 1440p and audio return conforming to latest hdmi 1. 4 standard. Includes all necessary mounting hardware this mount ships with hardware for both wall and tv mounting. Anchor included is only for concrete wall installation not for dry wall alone application! rohs certified this product is rohs certified (european union directive standard of restriction of hazardous substance), aiming to protect human health and environment.

Mounting Dream MD2380 TV Wall Mount Bracket 26-55 Inch LED, LCD, OLED Plasma Flat Screen TV, Full Motion Swivel Articulating Dual Arms, up to VESA 400x400mm 99 LBS TiltingMounting-Dream-Bracket-Articulating-400x400mm

Mounting Dream Bracket Articulating 400x400mm (Av Furniture) FAQ.

This went up easily and moves well. This is the second time i've mounted a full motion wall mount and this one makes it easy. The instructions and the included supplies were so well thought out that it made me think it should be an online store basics product. I mounted this one on a wall in my basement. From opening the box to turning the tv on after hanging it on the mount was less than an hour. If you're particularly handy i'd guess you could easily get it done in less than 30 minutes. It's definitely sturdy as you'd expect for a mount rated for 99 pounds. If i need a full motion wall mount again i would definitely buy this again. -Notice from M. Carrie, Georgia

Click to Show mounting dream bracket articulating 400x400mm (av furniture) Details

I bought mounting deam tv mounts both mounts are good mobility, quality, sturdy and easy to install. I have a lg 48' led i purchased in 2010, the television is pretty weighty and my favorite television. I also have a 55' vizio i purchased 2014, this television is light weight so i purchased the one arm mounting dream md2377 mount to the vizio 55' and the md2380 to mount the lg 48'. Although, i am very pleased with both mount models i prefer the md2380. I highly recommend both mounts.

Mounting-dream-bracket-articulating-400x400mm-(av-furniture) set picture

- U. AlmaIt is more compact than some but gets the job done for a great price. . The instructions were clear to me but this is not the first wall mount i have installed. The template supplied really made marking the wall a snap. I mounted it to studs that were 16 inches apart. (suggestion - use a hole punch and punch out the cardboard markings where the screws are to be placed. This makes it easy to mark the exact placement with a pencil. ) when mounted it can be adjusted multiple ways. Tilt forward down, up move right and left. Be sure to tighten the screw controlling tilt and the one securing the versa mount to the rail. I looked at a similar mount selling for $139. 99 today. Quite similar. The online store sold mounting dream was a much better buy.

This is a great, sturdy mechanism. I recently bought a 55" tv and used this to mount on the wall. The back plate only spans 16" o/c studs, but the mounting plate can move severall inches either side of center. There is an additional bracket (sold separately) if your studs are spaced wider or the existing studs don't quite center the tv where you want it. I like the flexibility of the bracket that allows it to lay fairly flat on the wall or pull out and turn several degrees to watch it from another part of the room. I have this in my basement. So this is handy if i'm watch from the couch or using my exercise equipment. This is also very handy if you need to access the rear to change cables or add devices to your tv. Super simple to install, but with any tv mount, make sure you mount it to the wall studs! really, you pay all that money for a tv and hang it on the drywall? smh. Accepts most standard vesa mounting configurations

W. Jennifer, Louisiana

MOUNTING DREAM MD2380 TV WALL MOUNT BRACKET 26-55 INCH LED, LCD, OLED PLASMA FLAT SCREEN TV, FULL MOTION SWIVEL ARTICULATING DUAL ARMS, UP TO VESA 400X400MM 99 LBS TILTING Summary
Brand :    mounting dream
Color :    16" Wood Stud
Size :    16" Wood stud
Model :    FBA_LYSB00SFSU53G-ELECTRNCS
Quantity :    1
Order click here :    normally ships in 24 hours
Home Theater :    Best Av Furniture (mounting dream product review) for Mounting Dream MD2380 TV Wall Mount Bracket 26-55 Inch LED, LCD, OLED Plasma Flat Screen TV, Full Motion Swivel Articulating Dual Arms, up to VESA 400x400mm 99 LBS Tilting available ( Sep 2019 )
Price :    $27.99 (was $34.99)
  • Viewing becomes more comfortable: tilts tv up 5 and down 15 to reduce glare, swivels tv left or right according to your seats position. pull out to 15. 8 and retract back to 3. 6, making your tv alive to move
  • Technology of robot welding makes whole unit sturdy and safe.
  • Us based customer support answers your pre-purchase and installation questions. our mount is 10 year warranted!
  • Heavy duty unit fits for most of 26-55" tvs up to 99 lbs, with max vesa of 400 x 400mm/mounting holes spacing. our mounts are tested with 4 times loading listed. images on left side will help you see if this mount perfectly fits your tv in the aspects: like vesa, 16" studs spacing and possible blocked input. not perfect? you can check other mounting dream mounts for best options.
  • Easy installation with decent instruction and all included hardware in pre-labeled bags. +/-3 post-installation adjustment allows perfect tv leveling. comes with 6 hdmi and torpedo level as gifts.

Monster CIT MWH-8 Medium Diameter White Cable-It Wire Management System 8 feet

The fluke networks dtx-axkit alien crosstalk kit is used with the dtx-1800 network test meter to test and certify alien crosstalk performance on fiber networks. Copper and fiber testers are used by network technicians to troubleshoot, maintain, and optimize performance of copper and fiber optic cabling, hardware connections, and network settings in enterprise networks. A copper cable tester is a device for troubleshooting, inspecting, and certifying copper network cabling. Devices range from one-button tools for checking connectivity to complex tools for certifying network installations. Three types of testing include verification, to test whether a connection or cable is functioning correctly; qualification, to test a network's ability to support specific speeds and functionality; and certification, to verify whether a network installation meets industry standards. Cabling contractors, installers, and network technicians use copper cable testers to set up and maintain networks within a building or on a campus in corporate, academic, manufacturing, and other enterprise network environments. Fluke networks, a division of fluke corporation, manufactures tools and software for network deployment, performance management, and troubleshooting. The company, founded in 1992, is headquartered in everett, wa. What's in the box? (1) dtx-axtlk1 communication module set(2) terminators (common mode and differential mode)(2) 8-pin couplers (ciq-rja)dtx axtalk analyzer softwareinstructions

Monster CIT MWH-8 Medium Diameter White Cable-It Wire Management System 8 feetMonster-CIT-MWH-8-Diameter-Management

MONSTER CIT MWH-8 MEDIUM DIAMETER WHITE CABLE-IT WIRE MANAGEMENT SYSTEM 8 FEET Highlight
Price :    $14.95
  • Tests, troubleshoots, and certifies alien crosstalk performance on fiber networks
  • Compact cable "wrap" for home theater, home office, home studio and or any room in the home
  • Alien crosstalk analyzer kit with communication modules and axtalk analyzer software for use with fluke networks dtx-1800 network test meter, to test and certify alien crosstalk performance
  • Neatly and effectively clean up cable clutter
  • Set includes one set of dtx-axtlk1 communication modules, common and differential mode terminators, 8-pin couplers, and dtx axtalk analyzer software
Brand :    monster
Color :    White
Size :    8 feet
Model :    CIT MWH-8
Quantity :    1
Order click here :    -
Speakers :    Best Ce Accessory (monster product review) for Monster CIT MWH-8 Medium Diameter White Cable-It Wire Management System 8 feet available ( Sep 2019 )

VideoSecu ML531BE TV Wall Mount 32 -55 LED LCD Plasma Flat Screen Monitor up to 88 lb VESA 400x400 Full Motion Swivel Articulating 20 in Extension Arm, HDMI Cable & Bubble Level WP5

I bought this last year, shortly after i got a new t. V. I put off installing the mount because it seemed daunting, but i finally bit the bullet and did it; and the install went far more smoothly than i expected. I used a cordless drill, a stud finder with built-in laser level, 7/32 drill bit, and 10mm wrench and socket. Lots of measuring and following of the easy-to-understand directions, and voila! i can now pivot and tilt my television to my hearts delight. I also like that the mount only requires one stud for mounting, rather than two.

The videosecu articulating mount is a mounting solution for 32"- 42", some models up to 55 inch (please check vesa and weight). The tv mount fit vesa 200x200mm/200x100/100x100 (8"x8"/8"x4"/4"x4"). This wall mount comes with 4 removable mount adapters. It can extend the vesa to 400x400 400x300 400x200 300x300 300x200 (16"x16"/16"x12"/16"x8"/12"x12"/12"x8"). Please check your tv vesa; these are square or rectangular patterns between 4 and 16 inches per side on the rear of your display. Heavy gauge steel construction provides safety loading up to 88lbs display. The high-tech look mount offers 15 degrees forward and 5 degrees backward tilt, 180 degrees of swivel and extension up to 20 inch for viewing angle and tv placement adjustment. The removable vesa plate can be taken off for easy installation. Will the mount fit my tv? firstly, please check the weight of your display, it should be less than 88 lbs. Secondly, if your monitor or tv has 4 mounting holes on the back of the screen that are 400x400 400x300 400x200 300x300 300x200 200x200mm/200x100/100x100 (16"x16"/16"x12"/16"x8"/12"x12"/12"x8"/8"x8"/8"x4"/4"x4") apart from each other vertically and horizontally this bracket will fit. In addition, please check the area inside the 4 mounting holes to make sure there are not any plugs. Otherwise, the plate may block the plugs. Notice: this mount fits most 32-49" tvs (vesa 400x400/400x300/400x200/300x300/300x200/200x200/200x100/100x100mm(16x16"/16x12"/16x8"/12x12"/12x8"/8x8"/8x4"/4x4")), some up to 50 55 inch tvs manufactured in recent 3 years

VideoSecu ML531BE TV Wall Mount 32 -55 LED LCD Plasma Flat Screen Monitor up to 88 lb VESA 400x400 Full Motion Swivel Articulating 20 in Extension Arm, HDMI Cable & Bubble Level WP5VideoSecu-ML531BE-Monitor-Articulating-Extension

Videosecu Ml531be Monitor Articulating Extension (ml530b) FAQ.

This is a fantastic tv mount. I installed it last year, went very easy. I'm impressed that the mechanism has very little play in it. Unlike other inexpensive hinges and mechanisms, this one is still stiff and hasn't developed any unwanted flex to it after a year. Just upgraded to a larger tv, and the spare parts kit was exactly what was needed to transition to the new setup. It took all of 15 minutes to take down the old tv, put on the x-shaped extension arms, mount the new tv, and have our entertainment center back up and running. I'd definitely recommend this videosecu mount if you are looking for a solid, inexpensive tv mount to complement your black friday splurge! -Notice from U. Stacey, Ealing

Click to Show videosecu ml531be monitor articulating extension (ml530b) Details

This is holding my 52" on the wall with no problem. The mount takes a minute to put together because it is so versatile, but once you set it up for your tv, it's great.

Videosecu-ml531be-monitor-articulating-extension-(ml530b) set picture

- . MeredithI used to install tvs for people professionally, so i have used many different mounting systems. I was looking for something cheap, but reliable to hang a 50" lg 50la6200 lcd tv. I looked at a lot of options both on online store as well as elsewhere before settling in this one. I am happy that i did! . . For starters, this comes with everything that you could possible need to hang your tv, with the exception of a 2 phillips head screwdriver and a drill. Included are a complete assortment of screws, bolts and washers (all neatly organized and labeled in individual packets), a double-sided spanner wrench, a very nice magnetic level, and even a 10' hdmi cable. The instructions say to use the "optional" expansion kit for larger tvs. Usually, this is code for "kit not included. " i was pleasantly surprised to find that that was not the case here. For once, the "optional" kit was actually included! . . Installation was a breeze for me, even without instructions since i already know how this works, but i found the instructions relatively easy to follow for those who need them. All of the various configurations for the expansion arms can get confusing, but just try each one until you find the right setup for your tv. . * please note *. There is one change to the instructions that i highly suggest, however. The instructions say to drill a 7/32" pilot hole into the stud for each mounting bolt. Then screw the bolt in with a phillips head screwdriver. When i first mounted this (i wound up moving it shortly thereafter), i followed the suggestions for the pilot hole. Sure enough the screw did thread in easily. A little too easily. The second hole from the top actually stripped out and i was not putting much force behind the screwdriver at all! when i moved this to the other side of the room, i decided to go with a smaller pilot bit. I used a 3/16" bit instead. Granted, you are not going to thread the bolt in with a screwdriver - you will need a 10mm socket - but doing it this way, those bolts are not going anywhere! you could probably get away with a 13/64" bit, but to really protect your expensive tv, i would want all of the bite i could get! . . I also found that the inside diameter of one of the washers was a smidge too small for the bolt to go through. I just enlarged it with a round needle file, but since they don't include any spares, if you don't have a file or another washer laying around, you'll need to get one. Just thought i'd throw that out there in the interest of full disclosure. . Once this was installed, i was impressed with not only the sturdiness, but also with the complete range of motion. This is fully articulated. You can put your tv pretty much anywhere you want to. The only thing it can't do is move your tv up or down, although you can tilt it to a certain degree.

Just received our second tv mount. We have had the first one around 5 months, and has held up really well. The first one we have a 42" insignia mounted, and today mounted our 55" tcl. Installation is super easy, both time only taking about 10-15 minutes with the help of my wife. The angles of this thing are amazing, and you can turn it or tilt it for a viewing angle that suits you! anywhere you can find a stud this mount will fit, even in a corner! these are super sturdy and well made for the price. Instructions are simple and to the point. Comes with plenty of screws, washers, and even an hdmi cord! can not recommend these enough, and i'm sure they'll outlast my tvs!

T. Kathlene, Barnsley

VIDEOSECU ML531BE TV WALL MOUNT 32 -55 LED LCD PLASMA FLAT SCREEN MONITOR UP TO 88 LB VESA 400X400 FULL MOTION SWIVEL ARTICULATING 20 IN EXTENSION ARM, HDMI CABLE & BUBBLE LEVEL WP5 Spotlight
Brand :    videosecu
Color :    Black
Size :    32-50 inch
Weight :    10.00 pounds
  • Post-installation level adjustment allows the tv to perfectly level
  • Heavy guage steel supports screens up to 88 lbs. compatible with vesa (mounting hole pattern) 400x400mm/400x300mm/400x200mm/300x300mm/300x200mm/200x200mm/200x100mm/100x100mm (16"x16"/16"x12"/16"x8"/12"x12"/12"x8"/8"x8"/8"x4"/4"x4")
  • Tilt+15 /-5 , swivel 180 degrees and rotate for maximum viewing flexibility; vesa plate can be taken off for easy installation by one person
  • Low profile mount retracts to 2. 2" to save space, extends 20" from the wall
  • Standard mounting hardware, 10 ft hdmi cable and 6" 3-axis magnetic bubble level included
Price :    $19.99 (was $24.99)
Model :    ML531BE
Quantity :    1
Order click here :    normally ships in 24 hours
Speakers :    Best Av Furniture (videosecu product review) for VideoSecu ML531BE TV Wall Mount 32 -55 LED LCD Plasma Flat Screen Monitor up to 88 lb VESA 400x400 Full Motion Swivel Articulating 20 in Extension Arm, HDMI Cable & Bubble Level WP5 available ( Sep 2019 )

Monster CIT SBK-8 Small Diameter Black Cable-It Wire Management System 8 inches

The fluke networks dtx-axkit alien crosstalk kit is used with the dtx-1800 network test meter to test and certify alien crosstalk performance on fiber networks. Copper and fiber testers are used by network technicians to troubleshoot, maintain, and optimize performance of copper and fiber optic cabling, hardware connections, and network settings in enterprise networks. A copper cable tester is a device for troubleshooting, inspecting, and certifying copper network cabling. Devices range from one-button tools for checking connectivity to complex tools for certifying network installations. Three types of testing include verification, to test whether a connection or cable is functioning correctly; qualification, to test a network's ability to support specific speeds and functionality; and certification, to verify whether a network installation meets industry standards. Cabling contractors, installers, and network technicians use copper cable testers to set up and maintain networks within a building or on a campus in corporate, academic, manufacturing, and other enterprise network environments. Fluke networks, a division of fluke corporation, manufactures tools and software for network deployment, performance management, and troubleshooting. The company, founded in 1992, is headquartered in everett, wa. What's in the box? (1) dtx-axtlk1 communication module set(2) terminators (common mode and differential mode)(2) 8-pin couplers (ciq-rja)dtx axtalk analyzer softwareinstructions

Monster CIT SBK-8 Small Diameter Black Cable-It Wire Management System 8 inchesMonster-CIT-SBK-8-Diameter-Management

MONSTER CIT SBK-8 SMALL DIAMETER BLACK CABLE-IT WIRE MANAGEMENT SYSTEM 8 INCHES Benefits
Brand :    monster
Color :    Black
Size :    8 inches
Weight :    1..83 pounds
Model :    CIT SBK-8
Quantity :    1
Order click here :    -
  • Alien crosstalk analyzer kit with communication modules and axtalk analyzer software for use with fluke networks dtx-1800 network test meter, to test and certify alien crosstalk performance
  • Set includes one set of dtx-axtlk1 communication modules, common and differential mode terminators, 8-pin couplers, and dtx axtalk analyzer software
  • Tests, troubleshoots, and certifies alien crosstalk performance on fiber networks
  • Compact cable "wrap" for home theater, home office, home studio and or any room in the home
  • Neatly and effectively clean up cable clutter
Price :    $12.95
Speakers :    Best Ce Accessory (monster product review) for Monster CIT SBK-8 Small Diameter Black Cable-It Wire Management System 8 inches available ( Sep 2019 )

Monster CIT MGY-8 Medium Diameter Gray Cable-It Wire Management System 8 feet

The fluke networks dtx-axkit alien crosstalk kit is used with the dtx-1800 network test meter to test and certify alien crosstalk performance on fiber networks. Copper and fiber testers are used by network technicians to troubleshoot, maintain, and optimize performance of copper and fiber optic cabling, hardware connections, and network settings in enterprise networks. A copper cable tester is a device for troubleshooting, inspecting, and certifying copper network cabling. Devices range from one-button tools for checking connectivity to complex tools for certifying network installations. Three types of testing include verification, to test whether a connection or cable is functioning correctly; qualification, to test a network's ability to support specific speeds and functionality; and certification, to verify whether a network installation meets industry standards. Cabling contractors, installers, and network technicians use copper cable testers to set up and maintain networks within a building or on a campus in corporate, academic, manufacturing, and other enterprise network environments. Fluke networks, a division of fluke corporation, manufactures tools and software for network deployment, performance management, and troubleshooting. The company, founded in 1992, is headquartered in everett, wa. What's in the box? (1) dtx-axtlk1 communication module set(2) terminators (common mode and differential mode)(2) 8-pin couplers (ciq-rja)dtx axtalk analyzer softwareinstructions

Monster CIT MGY-8 Medium Diameter Gray Cable-It Wire Management System 8 feetMonster-CIT-MGY-8-Diameter-Management

MONSTER CIT MGY-8 MEDIUM DIAMETER GRAY CABLE-IT WIRE MANAGEMENT SYSTEM 8 FEET Overview
Brand :    monster
Color :    Gray
Size :    8 feet
Weight :    1.06 pounds
Model :    CIT MGY-8
Quantity :    1
Order click here :    -
Speakers :    Best Ce Accessory (monster product review) for Monster CIT MGY-8 Medium Diameter Gray Cable-It Wire Management System 8 feet available ( Sep 2019 )
Price :    $14.95
  • Tests, troubleshoots, and certifies alien crosstalk performance on fiber networks
  • Alien crosstalk analyzer kit with communication modules and axtalk analyzer software for use with fluke networks dtx-1800 network test meter, to test and certify alien crosstalk performance
  • Compact cable "wrap" for home theater, home office, home studio and or any room in the home
  • Neatly and effectively clean up cable clutter
  • Set includes one set of dtx-axtlk1 communication modules, common and differential mode terminators, 8-pin couplers, and dtx axtalk analyzer software

VideoSecu Mounts Articulating TV Wall Mount 32 37 39 40 42 46 47 50 52 55 58 60 62 63 65 LCD LED Plasma Flat Panel TV VESA 200x100 to 400x400, 600x400mm MW365BBM7 BM7

The videosecu single arm tv wall mount constructed with solid heavy duty steel, support most 32" - 65" flat screen tv with mounting hole pattern up to 24 inch wide and 16 inch high (vesa 600x400 600x300 600x200 500x300 400x400 400x300 400x200 300x300 300x200 200x200 200x100mm). Single arm design support 180 degrees side-to-side swivel and the plate can turn left or right up to 90 degrees (the max degree is depending on your display size). The tv mount tilt forward 15 degrees or backward 15 degrees and extends the flat panel screen up to 21. 65" from wall to achieve vast range of viewing angles. 18. 88 width wall plate support mounting stud up to 18" (standard mounting stud is 16" in us). Post installation level adjustment allows left and right rotation for perfect level in different view angles. Additionally, security screws lock the tv bracket to the wall mount from the bottom. How to ensure the mount compliance with your selected display? first, the weight of your display should be less than 135lbs. Next, mounting holes distance on the rear of tv must be less than 24" (600mm) horizontally and 16" (400mm) vertically. Last, your tv should be at least 32 inch wide. Otherwise, you will see the bracket. Notice: this mount fits most 32-55" tvs (vesa hole patterns from 200x100 mm (8x4") to 600x400mm (24x16")), some up to 60 65 inch tvs manufactured in recent 3 years.

VideoSecu Mounts Articulating TV Wall Mount 32 37 39 40 42 46 47 50 52 55 58 60 62 63 65 LCD LED Plasma Flat Panel TV VESA 200x100 to 400x400, 600x400mm MW365BBM7 BM7VideoSecu-Articulating-200x100-600x400mm-MW365BBM7

VIDEOSECU MOUNTS ARTICULATING TV WALL MOUNT 32 37 39 40 42 46 47 50 52 55 58 60 62 63 65 LCD LED PLASMA FLAT PANEL TV VESA 200X100 TO 400X400, 600X400MM MW365BBM7 BM7 Spotlight
Brand :    videosecu
Model :    FBA_MW365B
Quantity :    1
Order click here :    normally ships in 24 hours
Home Theater :    Best Av Furniture (videosecu product review) for VideoSecu Mounts Articulating TV Wall Mount 32 37 39 40 42 46 47 50 52 55 58 60 62 63 65 LCD LED Plasma Flat Panel TV VESA 200x100 to 400x400, 600x400mm MW365BBM7 BM7 available ( Sep 2019 )
Price :    $30.09 (was $39.99)
  • Fits most 32" - 65" flat panel displays with mounting holes (vesa) 600x400, 600x300, 600x200, 500x300, 400x400, 400x300, 400x200, 300x300, 300x200, 200x200, 200x100 mm
  • Adjustable tilt 15 degrees forward or 15 degrees backward, the arm can swivel 180 degrees and the plate can turn left or right 90 (depend on your screen size)
  • Post installation level adjustment allows tv to be level after mounting; support mounting stud up to 18"
  • Support display up to 135 lbs; arm fold 3. 07", extends to 21. 65"
  • Standard hardware pack and user manual included in the package

VideoSecu Tilting Extra Large TV Wall Mount Bracket 40 -80 LED LCD Plasma OLED 3D TV up to VESA 800x400mm 220 LBS Loading Capacity, Compatible Sony,Samsung,LG,Sharp,Vizio MP804B MZ8

This bracket is one of the strongest brackets available on online store. 2. 5mm thick heavy duty steel construction support screens up to 220lbs. Supports tv with mounting hole patterns up to 32" horizontally, and 16" vertically (vesa mounting standards 800x400 800x300 800x200 700x400 700x300 700x200 684x300 600x400 600x300 600x200 500x300 500x200 400x400 400x300 400x200 300x300 300x200 200x200mm). Tilt 15 degree forward or backward for viewing angle adjustment. Lift and lock safety system secure the display in position as needed. Heavy-gauge steel construction offers a smooth surface, high-tech look while providing strength and durability. Notice: this mount fits most 40"-80" tvs (vesa hole patterns from 200x200mm(8"x8") to 800x400mm(32"wx16"h)), do not work for some old size 85 90 inch tvs manufactured before 2013 year.

VideoSecu Tilting Extra Large TV Wall Mount Bracket 40 -80 LED LCD Plasma OLED 3D TV up to VESA 800x400mm 220 LBS Loading Capacity, Compatible Sony,Samsung,LG,Sharp,Vizio MP804B MZ8VideoSecu-Tilting-800x400mm-Capacity-Compatible

VIDEOSECU TILTING EXTRA LARGE TV WALL MOUNT BRACKET 40 -80 LED LCD PLASMA OLED 3D TV UP TO VESA 800X400MM 220 LBS LOADING CAPACITY, COMPATIBLE SONY,SAMSUNG,LG,SHARP,VIZIO MP804B MZ8 Spotlight
Brand :    videosecu
Color :    Black
Size :    40-80 inch
Model :    MF607BL
Quantity :    1
Order click here :    normally ships in 24 hours
  • 15 degrees forward or backward easy one-touch tilt to reduce glare; rail design allows tv to shift left and right for tv placement
  • Vesa mounting hole pattern compatible 800x400mm, 700x400mm, 684x300mm, 600x400mm, 600x200mm, 500x300mm, 400x400mm, 400x200mm, 400x300mm, 300x300mm, 300x200mm, 200x200mm
  • Stud up to 860mm (33. 9"); standard mounting hardware included
  • 2. 5mm thick steel makes the mount solid sturdy, supports screens up to 220 lbs
  • Heavy duty and extra large tv mount for 40" 42" 50" 55" 60" 65" 68" 70" 75" 78" 80", some models up to 85" 90"
Price :    $39.99
Office Sale :    Best Av Furniture (videosecu product review) for VideoSecu Tilting Extra Large TV Wall Mount Bracket 40 -80 LED LCD Plasma OLED 3D TV up to VESA 800x400mm 220 LBS Loading Capacity, Compatible Sony,Samsung,LG,Sharp,Vizio MP804B MZ8 available ( Sep 2019 )

VideoSecu Tilt Swivel TV Wall Mount 32 - 55 LCD LED Plasma TV Flat Screen VESA 200x200,400x400,up to 600x400 mm, Full Motion Articulating Dual Arm Mount Fits up to 24 Studs MW365B2 C20

The videosecu dual arm articulating wall mount constructed with solid heavy duty steel, support most 39" - 65" flat screen tv with mounting hole pattern up to 24 inch wide and 16 inch high (vesa 600x400 600x300 600x200 500x300 400x400 400x300 400x200 300x300 300x200 200x200 200x100mm). Dual arm design allows forward or backward tilt, 160 degrees side-to-side swivel (the max degree is depending on your display size) and extends the flat panel screen up to 16" from wall to achieve vast range of viewing angles. Post installation level adjustment allows left and right rotation for perfect level in different view angles. The wall plate is more than 24" wide, so it is easy to mount into studs up to 24" (standard stud is 16"). Additionally, security screws lock the tv bracket to the wall mount from the bottom. How to ensure the mount compliance with your selected display? first, the weight of your display should be less than 135lbs. Next, mounting holes distance on the rear of tv must be less than 24" (600mm) horizontally and 16" (400mm) vertically. Last, your tv should be at least 32 inch wide. Otherwise, you will see the bracket. Note:please check the area inside the 4 mounting holes to make sure there are not any plugs. Otherwise, the plate may block the plugs. Please check tv vesa and weight. Notice: this mount fits most 39-55" tvs (vesa hole patterns from 200x100 mm(8x4") to 600 x 400(mm)(24x16")), some up to 60 65 inch tvs manufactured in recent 3 years.

VideoSecu Tilt Swivel TV Wall Mount 32 - 55 LCD LED Plasma TV Flat Screen VESA 200x200,400x400,up to 600x400 mm, Full Motion Articulating Dual Arm Mount Fits up to 24 Studs MW365B2 C20VideoSecu-200x200-400x400-Articulating-MW365B2

VIDEOSECU TILT SWIVEL TV WALL MOUNT 32 - 55 LCD LED PLASMA TV FLAT SCREEN VESA 200X200,400X400,UP TO 600X400 MM, FULL MOTION ARTICULATING DUAL ARM MOUNT FITS UP TO 24 STUDS MW365B2 C20 Benefits
Brand :    videosecu
Size :    32-55 inch
Model :    MW365B2
Quantity :    1
Order click here :    normally ships in 24 hours
Speakers :    Best Av Furniture (videosecu product review) for VideoSecu Tilt Swivel TV Wall Mount 32 - 55 LCD LED Plasma TV Flat Screen VESA 200x200,400x400,up to 600x400 mm, Full Motion Articulating Dual Arm Mount Fits up to 24 Studs MW365B2 C20 available ( Sep 2019 )
Price :    $31.94 (was $39.99)
  • Heavy steel construction, maximum loading capacity to 135 lbs; the wide wall plate support up to 24" studs
  • Minimum mounting profile 3", extends to 16"; adjustable tilt 15 degrees forward or 5 degrees backward
  • Standard mounting hardware and user manual included
  • Fits most 32-55 inch tv with mounting hole patterns 200x100 to 600 x 400mm
  • Post-installation level adjustment allows the tv to perfectly level

TCL 55S405 55-Inch 4K Ultra HD Roku Smart LED TV 2017 Model

Great tv for the price. They also finally patched and fixed screen mirroring. Although it is not as smooth as i want it to be it finally works for windows and for mobile devices. It uses the same technology as miracast and definitely has room for improvement but it works great overall! . . Keep the tv on the latest version but i would recommend this as my best tv buy in-terms of price to performance ratio in 2017.

The s-series 4k tcl roku tv delivers stunning picture performance while bringing all your favorite content through a simple, intuitive interface in a sleek modern design.

TCL 55S405 55-Inch 4K Ultra HD Roku Smart LED TV 2017 ModelTCL-55S405-55-Inch-Ultra-Smart

Tcl 55s405 55-inch 4k Ultra Hd Roku Smart Led Tv 2017 Model (Television) FAQ.

After hours of gaming, movies and tv, this is simply the best tv i've ever purchased! i tweaked some settings (which was incredibly easy) and couldn't stop dropping my jaw. Draw distances in games seemed enhanced somehow. The colors. The hdr is so worth it. I can't stress enough how worth it the hdr is. Blows my dang mind, even the tv's speakers are better than expected, bass is noticable. The apps and roku function very smoothly. I would highly suggest anyone that loves movies or games (or both) to get this tv! great price for supreme value! -Notice from R. Parker, Enfield

Click to Show tcl 55s405 55-inch 4k ultra hd roku smart led tv 2017 model (television) Details

This tv does it all - seriously its a great deal for the price. Yes it is 4k, yes it is 120hz, yes it has hdr, and it does them all well. I'm usually not a fan of smart tvs or roku in general, but all the smart tv functions are smooth and work perfectly. Netflix is supported in 4k if you have the top tier subscription. My supported ps4 games look fantastic, but psvr owners be aware psvr does not support hdr throughput (you need to connect to ps4 directly). My only very minor complaint is there is no coaxial audio port, so i had to use one of the 3 hdmi input for my soundbar. This is probably for the best anyhow since the first hdmi supports hdcp and allows controlling the soundbar and tv volume with the remote simultaneously.

Tcl-55s405-55-inch-4k-ultra-hd-roku-smart-led-tv-2017-model-(television) set picture

- S. GlendaIt was a bit wider than the description gave with its framing. Excellent tv. We have been using it for netflix, online store prime, cable, etc. I was worried about the wireless connection not being strong enough. The tv has an excellent wireless interface. It picked up my router from the upstairs, other end of the house location with no trouble. I have not seen any buffering at all. The thing i had to figure out was where the volume buttons were on the remote control. They are on the side. The tutorial teaches you that. The interface is pretty good. The instructions were clear and understandable. My son likes it for the crispness of the graphics with his xbox 1s. It was lighter than i was expecting considering the 32" lcd tv we were using prior to this. Value is a+. Shipping was quick and everything worked out of the box. The most amount of time was setting up my accounts for the tv. Once that was done, it was katie bar the door for the tv watchers. My father-in-law loved watching it for football over thanksgiving.

I purchased this tv to go into a spare bedroom that's primarily used for gaming & sports, so it would not only need to be a fantastic tv, but also double as a 4th pc monitor. . As a tv, this is a great product. I was happily surprised when compared to our main tv downstairs (a $2, 500 samsung 4k hdr) when i was testing it for issues. I didn't have any cracks, dead pixels, or light bleeding upon arrival. The color display may be lacking many of the customization options found on more expensive tvs, but the default settings will be more than enough for the average user. The hdr settings are excellent and my ps4 pro was able to output a beautiful picture (pro-tip: switch the input mode to hdmi 2. 0 instead of auto and raise the color to about 75). The upscaling from 1080p to 4k isn't as crisp as with my more expensive samsung, but i've actually seen worse on a more expensive sony set. . For a smart tv, this is where i wish other companies like samsung would invest a little more effort. The roku interface is absolutely top-notch and one of the best smart tv firmwares around. It's simple, elegant, responsive (i. E. Fast) and supports just about everything you can think of except twitch. . Edit: there is in-fact an app for twitch. Dunno how i missed it. . Pc monitor - this is a capable monitor for both 4k and hdr, but there are some things to take note of. My regular setup already consisted of a triple 1080p 24-inch monitor desk, with the 49" tcl to be mounted on the wall above them. When linked to my pc, it had no problem auto detecting as a 4th monitor, but getting hdr to work on the other hand was a little wonky due to some limitations with windows 10. First of all, if you simply enable hdr in windows 10, you'll find that the colors are very, very washed out. You can solve this by simply adjusting the color setting for the tv up to a higher amount (80-90 should work), but you'll still find that something is not quite right as the white tones will still look a tad "grayish". If you have an nvidia gpu (i have a gtx 1080), you'll need to manually adjust some of the settings for the best results. . Nvidia control panel - change resolution - use nvidia color settings and set the following options:. Output color format: ycbcr444. Disable windows 10 hdr. Enable game mode on the tv for reduced input lag. . Edit: hdr can still be enabled by individual games if played in fullscreen. The windows 10 setting controls only the desktop mode and apps. . This technically no longer will let you set the color depth to 10 bpc which i believe is needed for most hdr10 compliant devices to detect an hdr source, but after doing a bit of digging online, it's not that big of a loss. The more important factor is the chroma 4:4:4 setting that this tv supports at 4k 60 hz. With this setting, i did lose the "hdr" notification on the tv when switching to some games, but those were games with wonky hdr support anyway. Games like middle-earth: shadow of war, gears of war 4, and resident evil 7 had no problem getting the tv to recognize as being an hdr signal, and displayed the "hdr" notification. Colors were absolutely fantastic. Mass effect andromeda on the other hand gives me issues where it will either not properly display at fullscreen (borderless works but then framerate takes a dive), or the colors are washed out-for that game only, i had to disable hdr in windows 10 and force the hdr10 setting in the game menu, and then it worked. Of course, you could alway set the nvidia color setting to rgb and the dynamic range to full for richer colors, but then you'll be closer to crushed blacks and off-looking whites again. . Overall, i would say that this tv is worth the price. Products as good as this will hopefully help drive the cost of 4k/hdr sets down over the next year, as it's clear that you don't need a $2, 000 tv to properly use the tech. While this tv may not be perfect for all uses, it's very capable for anything.

F. Connie, Newcastle upon Tyne

TCL 55S405 55-INCH 4K ULTRA HD ROKU SMART LED TV 2017 MODEL Highlight
Brand :    tcl
Color :    Black
Size :    55-Inch
Weight :    30.00 pounds
Model :    55S405
Quantity :    1
Order click here :    normally ships in 24 hours
  • Dimensions (w x h x d): tv without stand: 49. 1" x 28. 5" x 3", tv with stand: 49. 1" x 30. 8" x 8. 7"
  • 120hz refresh rate allows fast moving action scenes to be seen with virtually no motion blur
  • Pairs 4k ultra hd picture clarity with the contrast, color, and detail of high dynamic range (hdr) for the most lifelike picture
  • Smart functionality offers access to over 4, 000 streaming channels featuring more than 450, 000 movies and tv episodes via roku tv
  • Direct-lit led produces great picture quality
Price :    $399.99
Home Theater :    Best Television (tcl product review) for TCL 55S405 55-Inch 4K Ultra HD Roku Smart LED TV 2017 Model available ( Sep 2019 )

VideoSecu TV Wall Mount Tilt Low Profile Ultra Slim Television Mount Bracket Most 26 - 47 LED LCD Plasma TV, Some up to 55 TV VESA 200x100 to 400x400 1FE

The slim 2 inch profile tilt mount mp409b designed for majority of 26"-47" lcd plasma tv and some led tv up to 55". Support mounting hole pattern within 16" horizontal and 16" vertical included 200x100, 200x200, 300x100, 300x200, 300x300, 400x100, 400x200, 400x300, 400x400mm. This mount supports up to 55 lbs. The steel construction offers strength and durability. Convenient quick-release tabs design on both mounting brackets. The durable black finish and decorative end caps cover locking for a clean appearance. How to ensure the mount is compatible with your display? firstly, the weight of tv should be less than 55 lbs. Next, mounting holes distance on the rear of tv must be less than 16" (400mm) horizontally and within 16" (400mm) vertically. Lastly, please check the dimension of your display, ensure it is wider than 16. 9" and height more than 16. 9", otherwise you will see the bracket. Notice: this mount fits most 26-47" tvs (vesa hole patterns from 200x100 mm (8x4") to 400x400mm (16x16")), some up to 50 55 inch tvs manufactured in recent 3 years

VideoSecu TV Wall Mount Tilt Low Profile Ultra Slim Television Mount Bracket Most 26 - 47 LED LCD Plasma TV, Some up to 55 TV VESA 200x100 to 400x400 1FEVideoSecu-Profile-Television-Bracket-200x100

VIDEOSECU TV WALL MOUNT TILT LOW PROFILE ULTRA SLIM TELEVISION MOUNT BRACKET MOST 26 - 47 LED LCD PLASMA TV, SOME UP TO 55 TV VESA 200X100 TO 400X400 1FE Benefit
Brand :    videosecu
Color :    Black Frame
Model :    MP409B
Quantity :    1
Order click here :    normally ships in 24 hours
Speakers :    Best Av Furniture (videosecu product review) for VideoSecu TV Wall Mount Tilt Low Profile Ultra Slim Television Mount Bracket Most 26 - 47 LED LCD Plasma TV, Some up to 55 TV VESA 200x100 to 400x400 1FE available ( Sep 2019 )
Price :    $11.99
  • Standard mounting hardware included
  • Fit majority of 26" 27" 32" 37" 40" 42" 46" 47" 50" 52" 55" plasma lcd led tv with mounting hole pattern 200x100 to 400x400mm (please check tv weight)
  • Tilt forward up to 10 degrees for viewing angle adjustment; new end caps cover locking for a clean side view
  • Convenient quick-release tabs design on both mounting brackets; mounts to any stud separation up to 16 inch
  • The steel construction offers loading capacity up to 55 lbs

WALI Floating Shelf Strengthened Tempered Glass DVD Players/Cable Boxes/Games Consoles/TV Accessories, 1 Shelf, Black

Wali has earned a reputation for delivering quality yet elegant mounting solutions. For customers seeking a reliable floating shelf with strengthened tempered glass, look no further. The ultra-slim wali wall mount has an all-black coating and adjustable shelf height to enhance the look of your entertainment system and free-up floor space. The sleek 5 mm black tempered glass shelf allows you to mount your dvd player, gaming consoles, or cable box weighing up to 17. 6 lbs. The slim wall plate protrudes just 19 mm from the wall allowing you to discreetly organize and hide your messy cables. Complete mounting hardware kit and user manual included for easy installation to wood, brick or concrete wall.

WALI Floating Shelf Strengthened Tempered Glass DVD Players/Cable Boxes/Games Consoles/TV Accessories, 1 Shelf, BlackWALI-Floating-Strengthened-Tempered-Accessories

WALI FLOATING SHELF STRENGTHENED TEMPERED GLASS DVD PLAYERS/CABLE BOXES/GAMES CONSOLES/TV ACCESSORIES, 1 SHELF, BLACK Spotlight
Brand :    wali
Color :    Black
Size :    1 Shelf
Weight :    4.95 pounds
  • Features: large strengthened tempered glass shelf (each glass measures 15 inch x 11 inch x 5mm thick), supporting a maximum weight up to 8kg (17. 6lbs) per shelf.
  • Environment: quality wall mount solution for holding dvd/blu-ray players, satellite/cable boxes, games consoles, hi-fi and surround speakers, etc.
  • Cable management: the slim all-black wall plate (3 inch wide) with built-in cable management on both sides protrudes just 19mm from the wall when installed, providing a clean overall look with cables neatly hidden.
  • Smart design: elegant floating shelf (with adjustable height) to free-up floor space and enhance the look of your entertainment system.
  • Package includes: 1 x wali floating shelf system (black), 1 x strengthened tempered glass, 1 x mounting hardware kit, 1 x user manual, 10 year-warranty
Price :    $13.49
Model :    CS201
Quantity :    1
Order click here :    normally ships in 24 hours
Home :    Best Home (wali product review) for WALI Floating Shelf Strengthened Tempered Glass DVD Players/Cable Boxes/Games Consoles/TV Accessories, 1 Shelf, Black available ( Sep 2019 )

WALI Floating Shelf Strengthened Tempered Glass DVD Players/Cable Boxes/Games Consoles/TV Accessories, 2 Shelf, Black

Wali has earned a reputation for delivering quality yet elegant mounting solutions. For customers seeking a reliable floating shelf with strengthened tempered glass, look no further. The ultra-slim wali wall mount has an all-black coating and adjustable shelf height to enhance the look of your entertainment system and free-up floor space. The sleek 5 mm black tempered glass shelf allows you to mount your dvd player, gaming consoles, or cable box weighing up to 17. 6 lbs. The slim wall plate protrudes just 19 mm from the wall allowing you to discreetly organize and hide your messy cables. Complete mounting hardware kit and user manual included for easy installation to wood, brick or concrete wall.

WALI Floating Shelf Strengthened Tempered Glass DVD Players/Cable Boxes/Games Consoles/TV Accessories, 2 Shelf, BlackWALI-Floating-Strengthened-Tempered-Accessories

WALI FLOATING SHELF STRENGTHENED TEMPERED GLASS DVD PLAYERS/CABLE BOXES/GAMES CONSOLES/TV ACCESSORIES, 2 SHELF, BLACK Highlight
Brand :    wali
Color :    Black
Size :    2 Shelf
Weight :    8.90 pounds
Model :    CS202
Quantity :    1
Order click here :    normally ships in 24 hours
  • Package includes: 1 x wali floating shelf system (black), 2 x strengthened tempered glass, 1 x mounting hardware kit, 1 x user manual, 10 year-warranty
  • Smart design: elegant floating shelf (with adjustable height) to free-up floor space and enhance the look of your entertainment system.
  • Features: large strengthened tempered glass shelf (each glass measures 15 inch x 11 inch x 5mm thick), supporting a maximum weight up to 8kg (17. 6lbs) per shelf.
  • Cable management: the slim all-black wall plate (3 inch wide) with built-in cable management on both sides protrudes just 19mm from the wall when installed, providing a clean overall look with cables neatly hidden.
  • Environment: quality wall mount solution for holding dvd/blu-ray players, satellite/cable boxes, games consoles, hi-fi and surround speakers, etc.
Price :    $18.99
Home :    Best Home (wali product review) for WALI Floating Shelf Strengthened Tempered Glass DVD Players/Cable Boxes/Games Consoles/TV Accessories, 2 Shelf, Black available ( Sep 2019 )

VideoSecu Mounts Tilt TV Wall Mount Bracket Most 23 - 75 Samsung, Sony, Vizio, LG, Sharp LCD LED Plasma TV VESA 200x100 400x400 to 600x400mm, Bonus HDMI Cable Bubble Level MF608B BBM

This low-profile tilt mount is designed for most 23-75 inch flat-panel tvs weighing up to 165 lbs. Vesa compliant for simple installation, supports tv with mounting hole patterns up to 23. 6" horizontally, and 16" vertically (vesa 600x400mm). Adjustable 15 degrees forward or backward tilts to provide comfortable viewing when the tv is mounted above eye level or to reduce screen glare. Perfect choice for mount your flat-panel tv on a wall, with stylish appearance, and it makes tv viewing so much better. Open wall plate for electrical access. Fit 16" or 24" studs typical in us homes. Common wall and tv attachment hardware are included in the box. Notice: this mount fits most 23-60" tvs (vesa hole patterns from 200x100 mm (8x4") to 600x400mm (24x16")), some up to 65 70 75 inch tvs manufactured in recent 3 years.

VideoSecu Mounts Tilt TV Wall Mount Bracket Most 23 - 75 Samsung, Sony, Vizio, LG, Sharp LCD LED Plasma TV VESA 200x100 400x400 to 600x400mm, Bonus HDMI Cable Bubble Level MF608B BBMVideoSecu-Bracket-Samsung-600x400mm-MF608B

VIDEOSECU MOUNTS TILT TV WALL MOUNT BRACKET MOST 23 - 75 SAMSUNG, SONY, VIZIO, LG, SHARP LCD LED PLASMA TV VESA 200X100 400X400 TO 600X400MM, BONUS HDMI CABLE BUBBLE LEVEL MF608B BBM Spotlight
Brand :    videosecu
Size :    23-75 inch
Model :    MF608B
Quantity :    1
Order click here :    normally ships in 24 hours
  • Low profile display your tv with stylish appearance ; strong and durable dual steel frames
  • Durable construction supports up to 165 lbs; fits up to 24" studs
  • Fits 23" to 75" tv with vesa from 200x100 to 600x400 (mounting hole pattern up to 24" horizontal by 16" vertical)
  • Bonus 6" 3-axis magnetic bubble level, 10 ft hdmi cable and standard hardware included; assembly required
  • 15 degrees forward or backward easy one-touch tilt to reduce glare, easy install
Price :    $20.11 (was $21.99)
Ce :    Best Av Furniture (videosecu product review) for VideoSecu Mounts Tilt TV Wall Mount Bracket Most 23 - 75 Samsung, Sony, Vizio, LG, Sharp LCD LED Plasma TV VESA 200x100 400x400 to 600x400mm, Bonus HDMI Cable Bubble Level MF608B BBM available ( Sep 2019 )

VideoSecu MW380B3 Full Motion Articulating TV Wall Mount Bracket 37 -70 LED LCD Plasma HDTV up to 165 lbs VESA 684x400 600x400 400x400 200x200mm, Dual Arm pulls out up to 16 AW8

Vervideosecu ml531be tv wall mount for most 22"-55" led lcd plasma flat screen monitor up to 88 lb vesa 400x400 with full motion swivel articulating 20 in extension arm, hdmi cable & bubble level wp5. . I just finished installing this videosecu ml531be tv wall mount over our fireplace with my 40" tv today. . I chose this mount after much research and deliberation, and i'm *very* glad that i did. . The mount arrived within the 2 day prime shipping window, and when i opened the shipping box, i found that the mount was packaged very well in an attractive retail box, complete with very easy to follow instructions, with all the hardware and screws for just about every tv and configuration, a wrench and hex key, and a small torpedo level and a hdmi cable. Perfect! . . The mount itself is very solid and secure, looks impressive, and there is almost no play in the pivot points. In fact, the pivot points are all adjustable for tightness or looseness depending on one's personal preference. There are secure tightening points for all adjustments of level and plumb. We used the mount with a 40" tv 200x200 vesa configuration, so we didn't need the extra brackets for the wider spacing that were included. The mount allows the 40" tv to be swung totally perpendicular to the wall so we can see the tv from another room at times. . If i ever need to mount another flat panel of a large size, this is the mount i will choose again. It's definitely a bargain for what you get. . (i am not affiliated with the seller or with videosecu, and i did not receive the mount for any promotion. I paid the full listed price of $24. 99 (an absolute bargain imo) and received no compensation for this review. I just believe in supporting merchants who provide an excellent product at an excellent price). . Bluegrass picker

The videosecu full motion articulating mount is designed for mid to large size lcd led plasma flat panel screen display. Constructed with high gauge steel, it handles screens up to 165lbs. This articulating mount supports tv vesa 684x400, 684x300, 600x400, 600x300, 600x200, 500x300, 400x400, 400x300, 400x200, 300x300, 200x200, 200x100mm. Dual arm design allows 160 degree side-to-side swivel (the max degree is depending on your display size), 15 degree forward and 15 degree backward tilt and extends the flat panel screen for perfect view positioning and reduce glare. The wall plate is 17. 5" wide, allowing it to be mounted into two standard wood studs 16" apart. Post installation level adjustment allows 3 degree rotation for perfect level in different view angles. How to ensure the mount compliance with your selected display? first, the weight of your display should be less than 165lbs. Next, mounting holes distance on the rear of tv must be less than 27" (684mm) horizontally and 16" (400mm) vertically. Last, your tv should be at least 37 inch. Otherwise, you will see the bracket. Notice: this mount fits most 37-60" tvs (vesa hole patterns from 200x200 mm (8x8") to 684x400mm (27x16")), some up to 65 70 inch tvs manufactured in recent 3 years

VideoSecu MW380B3 Full Motion Articulating TV Wall Mount Bracket 37 -70 LED LCD Plasma HDTV up to 165 lbs VESA 684x400 600x400 400x400 200x200mm, Dual Arm pulls out up to 16 AW8VideoSecu-MW380B3-Articulating-Bracket-200x200mm

Videosecu Mw380b3 Articulating Bracket 200x200mm (Av Furniture) FAQ.

So i was very skeptical of this product when i first looked at it, lots of people saying it would tear out of the wall shortly after installation and all that. Lemme tell you, they just did it wrong or like complete idiots; you do no use dry-wall mounts for a heavy tv, possibly a lighter tv, and i can not stress the word "light" enough. No one should be using dry-wall mounts in the first place, they are not reliable. Plain and simple. . Anyways, back to my experience with the product. I have it mounted above my xbox one about 4 feet off the ground. I mounted to a stud in the wall and right after that, my roommate who weighs around 150 lbs hung off of it for about 5 seconds at the base and it didn't even budge; now that's a tough wall mount if i ever saw one! i put my 40" samsung tv on the mount, and i can extend/swivel/angle/tilt it however i want. . The gear it comes with is pretty high quality and especially the level. For an add on to the product the level is pretty decent for it's designed purpose. The packaging is well done and the parts are all labeled well and accordingly. Make sure you use washers on the outside of the mount before you put the tv adapter on your tv, they will save you a lot of grief. . I've had this wall mount for a month so i felt pretty confident in writing a review. I'll add some pictures to let you know the range of motion as well as how the tv looks how i attached the adapter and the part where it's mounted to the wall. I can sit specifically off to the side and enjoy the tv along, i can turn it to look at my pc area so i can play while i talk to friends on skype or other chat programs and i can turn it to look at my bed and i can enjoy neflix or hulu as i lay in bed, nice and cozy. . I hope you all enjoyed my review, it's been a blast and i'll be willing to answer any questions you might have. -Notice from U. Weber, Utah

Click to Show videosecu mw380b3 articulating bracket 200x200mm (av furniture) Details

Very nice wall mount for price. Little to no wobble at all. Only hilding a 12 pound tv now. Might not be as sturdy with older heavy tv's when extended out. Also, the brain team i had install this put it up upside diwn, but did not notice and it still looks great. Cant tell it affected anything. They had the mount plate already attached this way and i just bolted tv to plate in this upside diwn position! not quite sure hiw i would take it down now if removing tv leaving plate attached to it! but heck, it dure is not comkng off the mount! recommed it for the newer light tv's. Dont hang a 60 pound plasma on it!

Videosecu-mw380b3-articulating-bracket-200x200mm-(av-furniture) set picture

- . RubyI mounted a 60" sharp led tv to this mount with no problems. I recieved it sooner than expected & it was 98% assembled out of the box. I followed the directions, took the time to do it right & it took about 20 minutes. . I always read the negative reviews first & i am baffled as to how people can have problems with this product. This mount is well made & i would recommend it to anyone that is concerned over the reviews stating it sags. . The mount can be easily installed by one person as i did below: you may need help to hang your tv on it once it is installed. I am laying this out because of the problems i read about in the other reviews. . 1. Figure out where your studs are & drive a pin or finish nail on each side of it to be certain where the centers are. Make these small holes about 1/4" above where your mount holes will be drilled. These small holes will be covered by your mount. 2. Drill your first pilot hole into the center of the stud & run the first lag bolt & washer through the mount & get it near snug. 3. Extend the bracket so you can lean against it. 4. While leaning against the mount in a eyed up level position, lay your level on top of the wall bracket & get it level. 5. Pull your pencil from behind your ear & mark the second hole which is on the opposite side of your first hole. 6. Let it back down & drill the second hole in the center of the stud. 7. Move the mount back to the level position & install the lag bolt & washer. 8. Tighten the two lag bolts so they are just about crushing the mount into the wall. 8. You can now drill your bottom holes & install the lag bolts & washers. Make sure you are in the center of the studs. 10. Tighten & retighten all four lag bolts. If these are not tight, you will have problems with the tv sagging when the mount is extended. It is critical that the four lag bolt are tight against the mount. If you skip using the washers, you reduce the strength & stiffness of your mount. . Any fine tuning needed can be done on the 3 bolt swivel plate after the tv is on the mount. . The mounting bracket has holes so you can install mud rings & plates for your wiring. I will be installing a recessed power outlet on one side & a brush cover faceplate on the other for the signal cables on the other. The mounting bracket has wire chases so everything is neat & held to avoid crushing cables. . The only thing i will do to modify the mount is to drill a small hole in the upper portion of each pivot point to allow me to easily give each pivot a shot of wd-40 once in awhile. This should keep it operating smoothly & keep things from getting tweaked if it gets a little sticky from dust & oxidation.

This mount was super easy to install. I mounted it against an exterior wall, so there were no studs, only furring strips against cinder blocks. I used 4 5/16" x 3 1/4" tapcon screws instead of the supplied lag bolts since i was going into cinder block. Drilled 4 1/4" pilot holes. Holds fine. I mounted an older 46 inch plasma tv which is heavier than most modern 65 inch tvs. Love being able to extend the arms to face whatever direction i want. Also love being able to adjust the horizontal alignment. Don't have to worry about it being at a perfect level.

Z. Joanne, Ohio

VIDEOSECU MW380B3 FULL MOTION ARTICULATING TV WALL MOUNT BRACKET 37 -70 LED LCD PLASMA HDTV UP TO 165 LBS VESA 684X400 600X400 400X400 200X200MM, DUAL ARM PULLS OUT UP TO 16 AW8 Benefit
Price :    $51.99 (was $64.99)
  • Arm fold less than 3" or extend 16" from wall ; post-installation level adjustment allows the tv to perfectly level
  • Fit 16 inch apart wood studs; free hdmi cable and standard mounting screws included
  • Supports display up to 165 lbs; adjustable tilt +15/-15 degrees and swivel side-to-side for comfortable viewing angle
  • Easy installation and adjustment
  • Articulating arm tv wall mount fits 37" 40" 42" 46" 47" 50" 52" 55" 58" 60" 62" 63" 65" 70" lcd led plasma display; mounting hole pattern compatible from 200x200 300x300 300x200 400x200 400x300 400x400 600x400 684x300 684x400mm
Brand :    videosecu
Color :    Black
Size :    37-70 inch
Weight :    17.00 pounds
Model :    MW380B
Quantity :    1
Order click here :    normally ships in 24 hours
Speakers :    Best Av Furniture (videosecu product review) for VideoSecu MW380B3 Full Motion Articulating TV Wall Mount Bracket 37 -70 LED LCD Plasma HDTV up to 165 lbs VESA 684x400 600x400 400x400 200x200mm, Dual Arm pulls out up to 16 AW8 available ( Sep 2019 )

VIZIO D D43n-E1 43 1080p LED-LCD TV - 16:9 - Black

D43n-e1, led tv - full hd, 43 inch, 16:9, 1920 x 1080, 200k: 1, 60 hz, 178/178, dts studio sound, 8w x 2 speakers, hdmi, ethernet, usb, 200mm x 200mm, one year parts & labor. Free lifetime technical support

VIZIO D D43n-E1 43 1080p LED-LCD TV - 16:9 - BlackVIZIO-D43n-E1-43-1080p-LED-LCD

VIZIO D D43N-E1 43 1080P LED-LCD TV - 16:9 - BLACK Advantage
Price :    $260.57 (was $299.00)
  • More energy efficient than conventional lcd tvs to save you even more on energy bills
  • Advanced virtual surround sound audio from vizio's two built-in speakers
  • Distributes leds behind the entire screen delivering superior light uniformity and picture performance.
  • Hdmi and usb ports are perfect for connecting all your high definition entertainment devices to the tv
  • 1080p full hd
Brand :    vizio
Weight :    27.56 pounds
Model :    D43n-E1
Quantity :    1
Order click here :    -
Home Theater :    Best Television (vizio product review) for VIZIO D D43n-E1 43 1080p LED-LCD TV - 16:9 - Black available ( Sep 2019 )

LG Electronics 43LJ5500 43-Inch 1080p Smart LED TV 2017 Model

Lg electronics 43lj5500 43-inch 1080p smart led tv (2017 model)

LG Electronics 43LJ5500 43-Inch 1080p Smart LED TV 2017 ModelLG-Electronics-43LJ5500-43-Inch-1080p

LG ELECTRONICS 43LJ5500 43-INCH 1080P SMART LED TV 2017 MODEL Review
Price :    $329.99
  • 60hz refresh rate allows fast moving action scenes to be seen with minimal motion blur (120hz effective rate)
  • Dimensions (w x h x d): tv without stand: 38. 5" x 22. 6" x 3. 2", tv with stand: 38. 5" x 24. 8" x 8. 7"
  • 1080p full hd resolution for a lifelike picture
  • Smart functionality gives you access to your favorite apps and content using webos 3. 5.
  • Direct-lit led produces great picture quality
Brand :    lg
Color :    BLACK
Size :    43-Inch
Weight :    18.50 pounds
Model :    43LJ5500
Quantity :    1
Order click here :    -
Home Theater :    Best Television (lg product review) for LG Electronics 43LJ5500 43-Inch 1080p Smart LED TV 2017 Model available ( Sep 2019 )

videosecu articulating tv wall mount bracket for 26 -55 lcd led plasma 3d tv with vesa up to 400x400, full motion tilt swivel dual arms bd4 Price : 32, was : 0 as 2018-01-12
USUKDEFRESITJPCNCAGlobal
United States
Great Britain
German
France
Spain
Italy
Japan
China
Canada
World Wide
Videosecu Articulating Bracket Plasma 400x400 (mw340b) Reviewed by on puqus.com

Top videosecu articulating bracket plasma 400x400 (mw340b) Content

The F.A.Q. for videosecu articulating tv wall mount bracket for 26 -55 lcd led plasma 3d tv with vesa up to 400x400, full motion tilt swivel dual arms bd4

After comparing mounts on online store, and marveling at the high prices of similar mounts elsewhere, i ordered this one. I decided i wanted a two-stud mount for security, and an articulating mount for ease of access once the tv was mounted. (as other reviewers have noted, even if you want your tv flat against the wall, having an articulating mount makes getting it set up so much easier. Even if you think you will never swivel or tilt the tv, get an articulating mount. ) this mount fit perfectly using the 16" studs in the wall. The mount is sturdy, and feels as if it will hold a much heavier item than most of today's tv's. Mine is an 18 lb. Sharp 43" roku tv. As others have noted, the swivel joints are quite stiff and difficult to work at first. This is actually ok with me, because it means the tv won't move unless i want it to. The mount extends far enough out to allow you to work behind the tv, so i was able to mount a power strip and cable box on the wall behind the tv; both of which are covered when the tv is pushed back into its normal position. It took about 30 minutes to install after gathering the tools needed, and was pretty painless. Plenty of different mounting screws and spacers were included. I didn't need any of them, as the tv came with the proper mounting screws, and has a flat back. All in all, a very satisfying experience. The tv looks great, everything i don't want to see is tucked away behind it, and it was easy.

A number of questions have been asked here.

Showing 20 Q&A on VideoSecu-Articulating-Bracket-Plasma-400x400

(0) Question: Samsung un60f6350 (60") weighs 50lbs. will this fit?


(1) Question: Will this mount fit a panasonic tc-l37d2 ? what appear to be mounting screw placement are 8 inches apart.


(2) Question: Will it fit vesa 200 x 400 ?


(3) Question: On the wall mount - what is the distance between the top holes and bottom holes?


(4) Question: How long does it take to install


(5) Question: 2017 sony bravia has a 100mm (3. 94 inches) *horizontal* x 200mm (7. 87 inches) *vertical* pattern will this mount work? thanks in advance


(6) Question: Will this cover the ports on the back of a lg 42lf5600-ub? so far, on 2 wall mounts, the plate that attaches to the tv has covered the port access


(7) Question: Will this hold a kdl60r510a 60 inch sony that weighs 56lbs. ?


(8) Question: My issue that the tv is level when against the wall but very un-level when pulled out and turned. is it defective or is this common due to quality?


(9) Question: My tvs hole pattern is 23 and a half inches, is there an adapter i can buy that will allow me to use this mount?


(10) Question: It says vesa up to 400x400. does that mean it can be adjusted? i don't want to assume, as i require vesa specs of 200x200.


(11) Question: Does it need to mount on 2 studs


(12) Question: What is the size of the opening on the plate that mounts on the wall? i. e. is it high enough for a duplex outlet mounted behind it?


(13) Question: Use for monitor?


(14) Question: Have 42 inch lcd but need to no size of face plate is it at least 25 inch to hang tv my tv is 24 inches for the brackets


(15) Question: Does it fit samsung 32 inch


(16) Question: It says up to 55" tv, but it says it can handle vesa 400x400 and 135lbs. my question will this mount hold a 70" sony 400x400under 100lbs?



(note) Question: where/how to get Videosecu (manufacturer's brand) accessories & similiar Videosecu's products

Click to Show/Hide the Answer
Answer:

Click on the marked text to copy to Clipboard

I purchased this mount for a 50" lcd tv that i purchased on black friday. . The mount feels very solid. I was not worried at all about letting go of the tv after setting it on the mount. It even feels sturdy when fully extending the tv out from the wall. . I did dock a star because of the problems i had leveling it. I mounted this with a level so i know the frame of mount was level. The left and right brackets that bolt to the tv were in the same exact position but i had to take the tv off of the mount about 6 times and keep readjusting the the piece that hooks up to the left and right brackets because i think the actual mount may have been tweaked a bit. Not a huge problem because once you finally get it perfect, you don't have to worry about it again. . Recommended for anyone who doesn't want their tv to end up on the ground but doesn't have $100+ dollars to spend on a mount.


Accessories & Supplies 704182, Audio & Video Accessories 235271, Electronics 282271, TV Accessories & Parts 466271, TV Ceiling & Wall Mounts 697067Top Videosecu Articulating Bracket Plasma 400x400 (mw340b) FAQ Content

Best videosecu articulating bracket plasma 400x400 (mw340b) in review

I love this mount. Tried it on a 55 inch vizio (vesa 200 x 200). Worked great. Sturdy, plenty of adjustments for tension on the arms, leveling , etc. Perfect size for 16in stud spacing, or on block or concrete using tap cons. Would not suggest for under 40 inch tvs as wall bracket may not be covered when arms are retracted . Requires more assembly time than high $ mounts, but i have hung 600+ tvs and assembly is pretty simple for a swivel/tilt mount. If you are not good with your hands and have issues turning a screwdriver, then this is not the mount for you. But if you have a little skill or smarts , you can't go wrong. 1/2 driver or socket required for wood studs. We use toggle bolts also without issue if the studs aren't where we need them to be. Not long ago a mount like this was 200$. I paid 32. Deal !

M. Rowe, New York

You might like to see Presence, Outdoor Security Camera People, Car Animal Detection Presence, The Smartest Outdoor Security Camera Is Able To Distinguish People, Cars And Animals. It Tells You Exactly What It Sees Around Your Home And Notifies You Directly On Your -Netatmo Presence, Outdoor Security Camera People, Car Animal Detection Noc01-us
  1. Reviews: Integrated Smart Floodlight Which Switches On Only When Needed, To Help Deter Unwanted Visitors, Cars, Animals Or All Three.
  2. Reviews: Diy Installation: Presence Simply Replaces Any Existing Outdoor Light.
Bargain Netatmo Presence Security Detection Noc01 Us (Surveilance Systems) Noc01 Us Netatmo Presence Security Detection Noc01 Us (Surveilance
Or you might like to consider Protective Case Echo Dot Fits All-new Echo Dot 2nd Generation - Premium Vegan Leather Cover Sleeve Skins, Love Fintie, A Quality Product In Your Reach! Protect And Keep Your Echo Dot Looking Great This Custom Case. Premium Synthetic Leather Soft Non-scratch Microfiber Interior. Provide Protection -Fintie Protective Case Echo Dot Fits All-new Echo Dot 2nd Generation - Premium Vegan Leather Cover Sleeve Skins, Love Tree
  1. Advantages: Premium Synthetic Leather With Soft Non-scratch Microfiber Interior. Provides Protection For The Aluminum Body Against Scratches, Greasy Dirt And Abrasions.
  2. Advantages: Aluminum Button Closure Adds Stability, Easy To Install And Secure.
Lower Price Fintie Protective All New Generation (Computer Input Device) Saad004ad Us Fintie Protective All New Generation (saad004ad

D. Janice, Rhode Island says

I was finally able to use this upon moving to my new apt which has poured concrete walls. By hanging this with tapcons it is strong enough to do pull ups on, let alone hold my 50" 4k tv. . However, when i purchased it last year i ran into a problem. We lived in an older building off campus and this was not large enough to reach the studs in the wall. If you live in a frame house in the us, this will most likely not work. . No matter your brand of tv this is packaged with a wide variety of screws to adjust for your tv set. This is both flexible and convenient. The ability to maneuver, twist, and tilt is great to get the angle just right no matter where you are sitting. . This unit is solid steel and is more than durable enough to hold a television of 50-55". But if you are going larger, or need to hit studs, you should look for a larger wall mount.

. Alba, Michigan

Awesome quality, feels very strong, and it is quite heavy as such. I got this one because it has more holes on the mounting plate, in case my studs where not exactly 16in apart. . It lets me move my tv very easily, i added a couple drops of oil at every joint before putting up just in case it was stiff even though it seemed good, this should give me a few years of easy of movement. . The tilt function is a bit hard to use, you have to lift a couple levers, one on each side, then tilt the entire tv (kind of heavy) to where you want and then lock both levers again. My levers came very lose and tightened them up myself, not too difficult. . The bolts it comes with are very high quality, look and feel very durable and i have no concern whether or not this will hold up with time.

. Palmer, Liverpool says

Works like a charm. Mounted a 60" vizio to a wall that was mostly cement. Yes, i said 60" because the vesa dimensions were spot on, and the tv is relatively lightweight. It's been securely on my wall for months now. Had all the components needed for any wall material, simple instructions, and swivels with ease. Just note that a leveler does not come with this kit, so if you don't already have one buy one. You'll need it to avoid having a lopsided tv situation.

J. Miller, North Carolina

I mounted this bracket on 2 studs (16" on center) and it's rock solid. I mounted a tcl 40-inch roku tv and it's probably overkill. I would feel totally comfortable mounting a much heavier set on this bracket. . Pros:. - fits a huge range of tv sizes, including non-vesa patterns. - easy to install. It took me less than 10 minutes. - attaches to 2 studs. . Cons:. - sticks out pretty far from the wall. That's the nature of this type of articulating mount, though. - the included lag bolts are huge. I spent a few bucks on spax smartlags. They leave smaller holes, don't require pre-drilling, and are even stronger than standard lag bolts.

S. Pearce, Arkansas says

Exactly what i needed! was looking for a mount that would swivel so my kids could watch tv while eating breakfast before school. This is perfect! super sturdy and easy to put up. Definitely drill into studs. I had nightmares the first few nights that i would here the tv crash to the floor. That hasn't happened. You can't beat the price. I had no idea about the measurements required so ordered a smaller size the first time and had to pay to ship back:(. The manufacturer should be more clear or buyer should ask question before making the same mistake. It would be so much easier if they gave length in inches between bolts for support bracket!

. Crawford, California

I doubt it's a whole lot different than most other similar mounts, but it worked well for what i needed. Although this is an articulating mount, i needed it mostly for its ability to extend quite a bit further from the wall, rather than to be able to move it around frequently. Because of the rather odd cut to the wall where i wanted to install it, i couldn't have it flush to the wall like many others you see. I was also installing a 42 inch tv on it, so i wanted to have the double arms rather than a single, because i know those can have a tendency to sag a bit over time with heavier tvs. . I didn't use the included mounting hardware because i always prefer to use my own lag screws purchased from a hardware store, but i did use the included hardware to attach to the tv, which was simple enough, as was getting the assembled tv and brackets up onto the mount itself. Getting the balance and position just right can be a bit tricky, but once you've got it where you want it, it holds well if you tighten down the screws. As i stated earlier, since i didn't need to be able to move mine around, i tightened everything in place, and it's been holding nicely in that position since.

G. Stacey, Connecticut says

This mount is very sturdy and strong. The only issue that i had was that the plate you mount to the wall was too narrow for the studs in my wall. It wasn't short by much, about a 1/2 inch or so on each side but enough that it made me worry about the weight of my tv pulling the mount off the wall. I ended up going to lowe's and getting some cheap common board cut down to 30" pieces and mounted those to the wall instead. After i screwed this mount onto the boards. You can see the mount points being juuuust too short in the photo. The only other concern is that this thing is heavy and comes fully assembled. Mounting it was fairly tasking on my arms holding it in place and screwing things in. I recommend having someone help you put it up.

A. Anonymous, Haute-Normandie

Taking a few minutes to describe my experience from my install last night. Took about 2 hours for completion attaching my samsung 55" led tv. Could not use the bolts sent. The manufacturer tried to be ready for anything by having 4 different tv mounting bolts, and 2 separate size spacers. I had to find my own bolt length and use extra washers. My studs are not in perfect alignment to put above my fireplace, so i mounted it to the studs and use the arms to center it above my tv. It allows for a reasonable tilt up and down, and has ability to tip the tv side to side, to make sure it's level even if the wall mount isn't. Tv weighs probably 30 lbs and this mount is doing a terrific job suspending it about 12 inches from the wall at the bottom, and 15 inches at the top. My tv bolt holes are exactly 16 inches apart, so i had to use the holes at the very end of the rack. Measure your tv bolt holes to ensure it will work, and don't be surprised if you need to make a trip to the hardware store for some extra hardware.

Z. Morgan, Gateshead says

Wow! i am blown away by the quality of this thing! it costs so much less than other wall mounts out there, and actually feels like it is meant to hold the weight that it's certified to. There is no wiggle room at the hinges whatsoever, which is always good because you'll be mounting your expensive tv on this thing and will want to know that it is secured in place. Pivoting the tv is super easy, and leaves the tv feeling secured even when the arms are extended. I would say that the quality of this wall mount is comparable to ones that cost $100+.

K. Jacqueline, Hawaii

I love these because they give so much flexibility. Before you order, check the spacing on your tv bracket mounts in the back, but these will fit 99% of flatscreens in the screen size listed. Also you need to make sure you have studs within the width, as this bracket is made for standard residential spacing (google it and get a stud finder at lowes for $10). I mounted both tvs with the slag bolts that came with the product directly into the studs. The product is rated for 135lbs but my 55" 2009 samsung is 85lbs and i would not suggest going much over that weight unless your going to add a couple toggle bolts or something into the drywall (youtube for easy toggle bolt install and lowes has them in pairs that will support 150lbs in drywall. Remember that the force exerted on the mount is much higher when your 85+ lb tv is extended out 10 inches with this bracket. . As to the negative reviews i saw several that claim the two hooks on the tv brackets were too wide for the mount where you hang the tv. They simply had them turned the wrong way, easy to do i did it, note that the silver levers to adjust the angle should be on the outside and hole that a screw goes up into on the bottom of each bracket that mounts to your tv. . If you want to have this kind of movement with your large flatscreen and studs are too wide or not in the position you want, check youtube there is an instructional video for how to buy and install a backerboard onto the studs that is ready to paint and then mount the mount onto that backerboard (this is also a good idea to do if your tv is 100+ lbs because it will give you tons of space to use additional slag bolts.

Y. Carmen, Kingston upon Thames says

This product was purchased to mount an older plasma tv on a wall, in the only place where that wall has a pair of studs on 14. 5" centers. While a previously purchased mount could not handle this specific scenario, this model did. The size of the box and the seemingly narrow width had me concerned that it would not actually fit a 400x400 pattern. However, the design was great, everything fit, and the mount stays neatly tucked behind the tv. . This mount is not low profile. Between the articulating arms, the additional plate, and the brackets that mount to the tv, there is a fair amount of distance between the back of the tv and the wall. Also, the mount does sag a bit when the arms are extend. The tv that it is mounted on is heavy (78 pounds), but is about half the maximum capacity that this mount is advertised to carry. . Overall, this is a good mount for my heavy tv. While the mount does stick out a bit from the wall (even when compressed), the narrow width ensures that the mount stays hidden behind the sides of the tv.

V. Hurst, Luton says

Overall this is a well priced, fairly versatile wall mount. I am using it to hold my 55" samsung led tv. The tv weighs 63 lbs. . Leaning:. However, the problem with the tv leaning is real. Many reviewers have mentioned that one can adjust the level with the allen wrenches. This is completely true, but that is not the whole story. The level of the tv is going to fluctuate as you move the tv into different positions. This has to do with the arm sagging forward when extended out. If the mounting bracket is fully extended and the tv pointing straight out, there is no issue with leaning left or right. However, when you point the tv to the left, the tv lean to the. Then rotating the tv right, it leans the other way. . Long story short- if you move the tv position often, you'll need to break out the allen wrenches often. There are 2 positions i stick this tv, and i have set the level so its always somewhat close to level.

U. Sally, Haringey

This is a good wall mount. Sturdy, strong. Keeps the tv level no matter how you move it. There are two things i don't like and this is why i gave it 4 stars instead of 5. 1) the mount is only 17" wide, designed for walls with studs 16" on center. My wall was 24" on center. To get around only hitting one stud, i put up a block of oak, 1 x 25" long. Then i installed the mount on top of that. 2) because this mounts swivels , tilts, etc, means that the tv when 'flat' against the wall is still out 7" from the wall. Plus in my case another inch for the oak. That's a lot. A good strong mount, if these two issues don't bother you.

O. Theola, Delaware says

The price and functionality cannot be beat. Videosecu made a good product and made it affordable. It is heavy so mount it on solid studs. The weight is a reflection of quality in this case, it holds my 42" securely and does not sag or sway the way cheaper lighter mounts have done for me in the past. I will be taking this off the wall and bringing it with me when i move. The mound allows for screen adjustment in all directions and can be pulled a ways out from the wall in order to access cables in the back of the tv which is nice.

C. Courtney, Missouri

I purchased this mount for my older tv which is a plasma. It has some weight to it, but this mount holds it just fine. I was hesitant due to the weight, but so far it has held the 55" plasma up with no issues. We used this mount for both the plasma and my 65" 4k and i wouldn't have it any other way. For the price, you really can't beat this mount. It is strong, it can flex and move about, and can extend out. If i buy a tv for my spare room, this mount will be the one that i buy. . On a side note, a good friend of mine has his own tv install company and this is the mount he uses frequently. Helps to keep the customer price down and it is strong, safe, and very reliable.

B. Benton, Lewisham says

Much sturdier than i expected for the price - thisis not a ding, but be aware it doesn't allow for an 'as easy' up/down tilt like some of the ball-socket units (that may wear out and loosen up too much, resulting in floppy-tv), but the side to side and sturdiness is great! it does allow you to set your tilt, and is adjustable with friction locks if you need them, and will tilt - you just can't grab the tv and change the tilt without reaching behind the tv and loosening the latches - if that's important to you. I'm going to toss one of my other flimsy (and more expensive) ball-socket units and get another of these!

W. Anonymous, New York

Installed this mount in my basement for a 42" lg led tv. - the instructions were clear and easy to understand. - the plastic parts bag was clearly marked with which nut/bolt/washer etc was contained within each section. No need to guess which most closely resembled the drawing. - the 4 large bolts mounted into two 2x4's made for a secure, stable and sturdy platform. - adjusting the tv left, right, forward or back is very easy. No bolts to loosen. - tilt is controllable and there is no sag. . Only 2 complaints about the bracket:. 1. Once the tv is hung on the bracket it is somewhat loose. This is because it literally just hangs on a crossbar. There are two small bolts to help keep it from sliding off the rails, and yes, it would be difficult to dislodge it, but it is not a tight fit. 2. Adjusting the tilt requires loosening 2 different locks on opposite sides of the tv. I don't adjust tilt very often so it doesn't bother me, but it could others. . All in all, very happy with this bracket. Will purchase again when we get a new tv for the bedroom.

L. Yvette, Redbridge says

After a previous failed attempt to hang my 35 lb. 40" toshiba tv with a single arm articulating mount (the previous mount bent catastrophically), i decided it was time to spend a little more for something with two arms. Upon first opening the box, i was impressed with how sturdy the entire thing feels and thankful for rather straightforward instructions. . I unfortunately didn't measure the studs prior to purchase, and only after i began planning where to hang this mount did i discover my apartment has 24" studs instead of the 16" studs this was designed for. After a quick trip to lowe's, i attached two 2x4s to my 24" studs, and then used these to attach the mount to the wall. Including my modification time, it took about 45 minutes to set everything up on my own. The bolts provided to secure the mount to the wall are a little tricky to ratchet in, especially as you try and hold the mount level with your pre-drilled holes. I would suggest having another person help you attach the mount to the wall. I would not suggest using the included wall fixing screws/anchors! mounting your precious tv on drywall anchors is a recipe for disaster, especially with the cheap anchors they include. Make sure you find a way to hang this mount on studs, or 2x4s as i did if there aren't studs where you want to mount the tv. You can always paint over the 2x4s to blend in with the wall, but honestly, the tv will cover them and you'll never notice them either way. . They provide a myriad of screws to mount the tv to the tv plate, however, make sure you are orienting the plate correctly. The instructions aren't the clearest here, and i accidentally mounted it upside down (although it was quick to rearrange the proper way once i realized the mistake). The side adjustment screws that tilt the tv either forwards or backwards are a little loose, and it appears they can't be tightened (on each side, there is a quick release handle and a set of screws to adjust the tilt; the quick release is very tight, the bottom screws are not. Maybe this is how it was designed? ). I'll report back if i can figure out how to further tighten them, or if it doesn't affect the mount's performance. . Overall, it's a great mount for the price ($40 when i purchased, delivered same day for free). If you adequately plan out the location of the mount, and have help assembling the thing, i think you will be very pleased with this product.

P. Patricia, Lorraine

I have this mount holding my 65inh vizio p series 4k tv. I wanted it to be secure after the money i paid for it. I was happy to find this mount for less than the crazy price others charge which is almost as much as the tv itself. However unboxing showed me a couple of concerns. . Note* the mount is not made for tvs as big as mine but i was significantly under the weight limit. I assumed this was not an issue. It still for the vesa 400x400 bolt pattern. . First concern was some of the tolerances/plastics didn't seem to be exactly the same. For example, there are two screws that hold the part that attaches to the tv to the mount on the wall at the bottom. One of the ores rolled screw holes was too big and i had to find a nut that allowed it to keep from falling out with gravity. This would not have resulted in a drop of the tv if it occurred. . Additionally, i adjusted the tilt level all the way up so that in theory it would be tilting up towards the ceiling slightly. However the flexible arms had too much play in the bolts and allowed the tv to sag down causing the screen to be slightly down facing not up. I remedied this by tightening up the bolts slightly which caused greater resistance when moving the tv but not a crazy amount. I doubt this is a huge concern because most people don't plan on tilting the tv towards the ceiling instead of the floor or straight ventricle. . I also tested it after installed on the wall by doing a pull up on the bracket. I weight 200lbs. (arms not extended, i'm sure that would bend it). . Overall after small adjustments it seemed very secure and i would buy again.

R. Wanda, Trafford says

This tv mount was exactly what i was looking for, for my 47 inch/50-70lb tv. This mount is extremely sturdy, and does't twist/bend when i shake it. Heavy duty construction. The size of the bracket that mounts to the wall is 17 inches long, made to mount on 16 inch on center studs. Mine were 24 inches on center, so i took a piece of 3/4 inch oak plywood and lagged each corner to the studs in the wall. Then i was able to mount this onto the plywood with no problems with the provided lag bolts. Would definitely by again, highly recommended for even the heaviest tv's.



Top articulating tv wall mount bracket Review

Disadvantage and Critical reviews

I. April, Kensington and Chelsea says

Item sagged for my 55 inch tv. Would not trust this mount, went to home depot and spent twice as much but am happy with what i have now.

S. Sandra, Sunderland

They claim it fits up to 55". Not on its own. The vertical mounting bars aren't wide enough to line up with the mounting holes in my tv (samsung flat screen). And i believe on their own they aren't wide enough to support any tv 42" or higher. I had to buy angle iron from home depot and cut it to fit horizontally to attach the mount to the tv. It worked and it does support the tv but i had to put that little extra work into it. Word of advice, measure your tv including the distances between mounting holes before you buy a mount. . The swivel feature works fine and it seems to be well made otherwise.

W. Courtney, Bromley says

Not the best. Maybe not the worst. Does the job but leans to the sides when extended and angled. Loses the level. Not sure if the 100$ ones are twice as good though

N. Lewis, Saskatchewan

Disappointed. Bought a 28" tv and it sticks up about 4" above the tv. Now i have to saw off the excess metal. Also, it didn't come with the screws necessary to mount it. Overall, not the best experience.

C. Aldana, Poitou-Charentes says

Bracket is easy to install. Works ok for 50" led tv. My panasonic 50" plasmas was to heavy at 78lbs so the specs on the bracket don't seem accurate, but it does hold my 50" led and i have a 65" led on one as well but it is pushing the brackets limit. By that i mean it wobbles a little when i turn tv on or off. So i had to use different one for my older heavier plasma tv. So i like the bracket for the price and does function ok. I wouldn't recomend to anyone if your tv is heavier then 50lbs.

U. McCarthy, Wyoming

Unfortunately i have to agree with few or comments in that there is something off with the bracket. The mounting goes on straight but there is something off in the extending/articulating part so that the tv ends up crooked. Had to rehang the mounting bracket crooked to offset. What should've been about a 15 minute project took an hour plus.

Y. Olga, Connecticut says

The part that attaches to the wall is to short . However, i worked hard to make it work and to secure it against the wall so the my television can remain in the same place.

B. Josephine, Greenwich

Nice wall mount but when we hung our 42" tv on it it tilted forward and couldn't seem to hold the weight. We had it anchored in really well to the wall but it wasn't going to hold our tv. We ended up buy a new mount and giving this to a friend with a smaller tv.

G. Finch, Sachsen says

I had a heavy tv and it didn't seem like it would hold well. The bracket sticks off the wall quite a bit.

L. Arnett, Arkansas

I knew i wasn't buying the rolls royce of tv brackets at this price, but i still figured it would work. This bracket has been an absolute headache to install! . . The mounting screws to the tv only come in two sizes, too long or too short. The washers to adjust the length of the screw are a joke, and didn't help at all. So, i had to make a trip to the hardware store to get the right size. . After mounting the bracket to the wall and the back plate to the tv, it was time to join the two. Wrong! with a helper, we lifted the tv and aligned the brackets, only to find that the plate that attaches to the tv was not big enough to fit on the bracket. We were absolutely shocked that it was so grossly mis-fit. We had to take a grinder and take off nearly 1/8" of the tv plate just to get it to sit on the bracket. . In other words, spend a little bit more money and save your time by getting a quality tv mount bracket.

A. Sally, Telford and Wrekin says

Used with a samsung 65" led/lcd display, about 50 pounds or less. . Pros: obviously the price on this model is excellent. The build quality is solid. Arms hold the tv firmly in place. Comes with a good amount of hardware. Like that the tv can be rotated slightly left/right up/down to ensure that it is level when in use (great feature! ) the stack height is just about 4" or so. This is very low profile for a tilting mount of this type and does a good job. The size specified (26"-55") really isn't as important as the weight rating and the hole pattern. It handles up to a 400x400 vesa mounting pattern. The largest samsung models use a 400x400 vesa pattern and weigh less than the mount rating, so this mount will work with any samsung led/lcd television. I would be wary of using it with their 64" plasmas as they weigh a fair bit more. The quick release mechanism for tilt adjustment is a nice addition as well. . Cons: exactly 16" from end to end on both the wall plate and the tv plate. This means you get almost zero left/right flexibility and you better have studs right at 16" on center exactly where you want to put this mount. There is zero ability to slide the tv left/right once it is mounted and no flexibility in placement. You certainly could use the provided anchors with it into drywall, but that would be a great way to waste your tv on the floor. So, it must go into the studs, and it has to match up perfectly. Not always an easy task. . The extension arms are very tight. If you pull on the edge of the tv you can feel the tv flexing considerably before the arms will move. This means a much firmer grip on the tv is necessary to move the articulating arms forward and back. It's not something i would feel comfortable with my wife or kids trying to pull in/out from the wall. This is far more of a set it and forget it type of articulating mount. If you need to regularly move the tv around, find something that moves a bit easier. . The wall bracket height is the same as the tv side bracket height. This causes me a bit of a headache on two fronts. First, when putting in the (provided! ) lag bolts, the arms must be fully extended to provide access to the holes using a drill. This makes the mount more awkward to hold in place. (hint: use a drywall screw through the center hole to hold the mount while you drill holes for the lag bolts to securely fasten it if you can) secondly, the height is only about 4" or so top to bottom. This means that when extended there is a lot of torque being placed over a very small area of the wall/structure that is supporting it. A larger wall plate would have provided access to the screw holes while the mount is collapsed and would provide far more surface area for the mount to use against the wall for better structural support. . The tilting mechanism has a quick release bolt which is very hard to access when the tv is mounted. It is possible to use, but the quick release is very close to the plates they are mounted on and while curved, they don't have enough curve to make it easy to grab them. Wish they had put a bit more thought into this design. . The hardware it comes with, while it will fit most displays, only comes in two sizes - short and long. About 1/2" and 1. 5". Unfortunately, that didn't work with my tv. I ended up having to make a trip to the hardware store to get some washers to space out the longer 1. 5" bolts so that it would be tight with my tv. They do provide a nylon spacer, but that simply wasn't long enough to accommodate the significant length different between their shorter bolts and the longer ones. It would be nice to have a couple of different sizes of nylon spacers to deal with this, or provide a dozen or so steel washers in the hardware bags to allow for more flexibility in the mounting bolts depth. . So, a lot more details on the cons for people to be aware of. I have 12 years experience as an a/v installer and designer and have used about 25 different articulating mounts from various manufacturers. . Overall, this mount is average in design. A few hits, a few misses. The price is solid and the prime delivery got it to me when i needed it. . My installation of the 65" tv was into a custom built cabinet with 2x4 backing extending all the way across the cabinet. This allowed me to place the mount exactly where i needed it to be, but i did have to measure several times to get the positioning absolutely perfect. There is just no room for error with this mount which definitely brings the score down. . I would not typically use this mount for my installations, and likely won't order it again. I would prefer a larger back plate and bit more ease of moving the tv around after it is mounted, and a tilt mechanism that is easier to use. Those mounts are out there for similar pricing. On the other hand, if i find myself needing a mount quickly and the location allows for full flexibility in where i place the mount, then i wouldn't go out of my way to avoid it. . Time will really tell how long the very tight construction holds up. The tv is certainly light enough that it should cause no issues at all with this mount.

Z. Florence, Washington

Bracket is not wide enough to mount my 50" panasonic. Item description mislead me.

. Bertie, Illinois says

The product is ok and sturdy. . Pro. * price. * strong. * good solid metal. * can support 65 inch sony lcd 4k no problem. . Cons. * back bracket and front bracket is not same level. I put a level on the back level and screwed perfectly. Than i place the level on the front and it's unbalance level. Now my tv is not level. Its bothers me all the time. * quality is ok , just wish they balance and level this correctly. * i had other brand where you can tilt not just front and back but side ways as well for those that are difficult to level.

D. Nielsen, Maryland

So i bought this a while ago and just had my handyman install it (added that so you know it's not just some noob messing up the installation). I am using this with my 42' sanyo tv. I guess my tv is bottom heavy because it is currently tilting downward and will not stay up. Also, the tv itself is currently crooked (the mount is level) and will probably have to be adjusted by my boyfriend because i'm 5'. Which leads to the other problem. Pulling the tv out or moving it around is not very easy. I get that it probably shouldn't be super easy to move, but i really never expected to have a problem adjusting it myself. For reference, the bottom edge of the tv probably sits about 4 feet off the ground.

T. Pamela, Pennsylvania says

We didn't like this product. We recently bought a brand new house, and the mount didn't install properly onto our wall studs and was very hard to work with. We didn't like the swivel features and i would definitely recommend you try a different product or spend a little more money on something better.

J. Watson, Bayern

I should have looked closer at the dimensions. The 16" back plate means that you cannot shift the back plate if the studs aren't exactly where you want the tv to mount. There is no room to shift the back plate. If you have a unit with a wider back plate you can mount the bracket off center allowing a few inches of shift from side to side. Overall though, it's a good bracket, easy to install, and works well with my 47" lcd. I'm just glad the studs were close to where i wanted to mount it.

V. Kelly, Sheffield says

The bracket is fine, but it came with a prepacked set of hardware. The screws for mounting the brackets to the back of the tv were enormous - nowhere near the size of the holes on the back of the tv (a run of the mill new sony). The package said they were m5, m6, and m8. I haven't tested, but they look a lot larger than the same sizes at home depot. After multiple trips to the hardware store to get the correct size and length (m4x20mm for 40" sony and this bracket), the tv is finally on the wall.

X. Alberta, Bradford

This was easy to mount on the wall but there are two brackets that attach to my 55" lg tv and while the brackets barely fit to the back of the tv, you then have to attach the brackets to the tv mount and screw them onto the mount. The two screws that you use to secure the brackets to the mount do not tighten enough and one of them is stripped. It's holding the tv fine and won't fall but seems like a cheap bracket. I wish i had not bought this mount.

. Alice, Virginia says

Not super sturdy for heavier tv still under the listed weight. If you have a lighter tv it should work fine.

O. Hadley, Northumberland

I chose this mount for 2 reasons: the price and the fact that it has 2 swing arms. The product description says this mount can handle 135 lbs. I do not believe this to be true at all. I have an older 47in lcd and according to the manufacturer it weighs 50. 2 lbs. . . . My tv puts quite a bit of strain on the mount, to the point where at max adjustment the tv still tilts downward by 3 to 5 degrees. The strain is on the 2 single arms closest to the tv side. They just aren't sturdy enough. I am not concerned that the mount will fail in the near future, but i believe in time the problem will get worse. . I keep the arms retracted to the wall and only extend them out on rare occasions (changing av cables). . For the price (i only paid $35, while at home depot i would have paid over $100) i didn't expect more then what i got. But i can't give a 5 star review to a product that claims to hold up 135 lbs. But can barely hold 50 lbs. . I do home remodels for a living, this is securely mounted on a wall i had reinforced especially for this purpose.

E. Cecilia, Islington says

It works well if you push the tv to the left or right but you can't push the tv straight back against the wall. Well built should be wider at the wall mount part. I had to drive screws in at an angle on one side to make sure i had a good lock to the stud. My studs must have been off a little.

P. Meyer, Haringey

The sony kdl-52xbr4 television i put on this mount weighs 93 pounds. And the mount, despite being rated for 135 lbs, can't handle it. It might technically prevent it from crashing to the floor for the time being, but the tv is tilted so far forward (because the mount itself is actually bending) that it scares me, even with the mount's tilt setting set all the way backward and with the tv pushed all the way up against the wall. I had to add a bunch of zip ties just to hold the tv in place to keep the mount from bending any farther until my new replacement mount arrives. . This mount is generally well built, and i'm sure it's fine for televisions up to around 60 pounds. But it most definitely is not capable of holding my tv securely even though the product information seems to indicate that it should be able to. It's rating ought to be half of what it is.

M. Carmen, Hammersmith and Fulham says

It's a heavy bracket, which is good. My tv scags when it is pulled out from the wall.

H. Noguera, Kansas

It's so so. This mount weighs more than the tv. Other mounts give you much more for mounting and better instructions than this one did. It does do the job though.

Q. Wayt, Montana says

First i think the mount is built well, that is, it doesn't sag and the materials are substantial. . The issues i have are in the implementation of the design. The mount makes the tv sit out from the wall over 4 inches, so the thin tv is not hugging the wall enough for me. . The other thing is that the mounting plate that goes against the wall is not really long enough, so its difficult to center the tv where you would like it securely. . The third issue is that the mount allows the tv to rotate. Not sure why that is, as the first 2 issues made me not want to work with it any more. Perhaps removing the tv and tightening some mount bolts would have fixed this.

K. Shawna, Montana

Works in one position, when i move my 50" tv, it sags on one side. I can only have it at a certain angle for it to be level.



Leave a Reply

You must be logged in to post a comment.


Back to Top

Related Products

  • Get Discount
    Atlantic Universal Adjustable Heavy Table (63607232)

    Atlantic Universal Adjustable Heavy Table (63607232) 2361

    Show Details Atlantic Universal Adjustable Heavy Table (63607232), Universal adjustable heavy duty table top tv stand / base mount up to 70 - lost your original tv stand when you bought that snazzy wall mount? the table top tv stand is the ideal tv stand solution for your flat panel tv. height adjustability and durable -atlantic universal adjustable heavy duty table top tv stand / base mount up to 70 - blackFor Sale Atlantic Universal Adjustable Heavy Table (Av Furniture) 63607232
  • Bestsellers
    Happyjoy Corner Bracket 600x400mm Articulating (mt1159 hjus)

    Happyjoy Corner Bracket 600x400mm Articulating (mt1159 hjus) 2074

    See Reviews Happyjoy Corner Bracket 600x400mm Articulating (mt1159 hjus), Corner Tv Wall Mount Tv Bracket Tilt 32-70 Inch Flat Plasma Led Lcd Tvs Vesa Max 600x400mm -articulating Dual Arm Full Motion Wall Important Information Happyjoy Full Motion Corner Tv Wall Mount Fits 32" To 70" Flat Panel Tvs Vesa Mounting Hole Patterns In 100-600mm Wide And 100-400mm High. It Has Dual Arm Mounts -Happyjoy Corner Tv Wall Mount Tv Bracket Tilt 32-70 Inch Flat Plasma Led Lcd Tvs Vesa Max 600x400mm -articulating Dual Arm Full Motion Wall Bracket
    1. I was nervous when i purchased this mount because i hadn t mounted a tv before. This was easy to install! it is easier to install with two people fyi. Mounted my 65 vizio no problem in the corner. Heavy duty design. No worries of it falling down at all! my walls are concrete which is unusual but the... go to https://puqus.com/happyjoy-corner-bracket-600x400mm-articulating-20741mxllmvf/#happyjoy-corner-bracket-600x400mm-articulating
    2. Listed: Universal Mount:fits For Most 32-70 Inch Tvs, Compatible With Vesa 600x400; 400x400; 300x300; 200x200; 200x100; 100x100mm(mounting Hole Pattern Behind Tv), Suitable For Lg Samsung Sony Finlux Sanyo Toshiba Panasonic Philips Sharp Emerson Insignia Westinghouse Element Coby Jvc Aoc Dynex Tcl Roku Ect 1080p Led 3d 4k Tv Etc.
    3. Listed: Super Safe & Strong:made Of Cold Rolled Steel, This Corner Mount Supports Up To 50kg(110lbs) Weight Capacity, Dual Arms Design Makes The Whole Unit More Sturdy And Prevent Sagging, Making It One Of The Most Strongest Mount You Can Trust, 100% Lifetime Manufacturer Warranty, Iso9001, Tuv/gs And Ul Certified.
    Lowest Price Happyjoy Corner Bracket 600x400mm Articulating (Ce Accessory) 4330178425
  • Low Price
    Basics Heavy Duty Articulating 32 Inch 80 Inch (pbh 1006)

    Basics Heavy Duty Articulating 32 Inch 80 Inch (pbh 1006) 99

    Free Shipping Basics Heavy Duty Articulating 32 Inch 80 Inch (pbh 1006), Heavy-duty, Full Motion Articulating Tv Wall Mount 32-inch To 80-inch Led, Lcd, Flat Screen Online Storebasics Brings You Everyday Items At A Great Value An Online Store Brand. -Basics Heavy-duty, Full Motion Articulating Tv Wall Mount 32-inch To 80-inch Led, Lcd, Flat Screen Tvs
    1. I had a difficult time finding a mount for my 25 inch monitor, with a slight mod. To mount this wall mount it works great. I also bought a wireless keyboard so now i have plenty of room on the desk. https://puqus.com/basics-heavy-duty-articulating-32-inch-80-inch-991kbeom2g/#basics-heavy-duty-articulating-32-inch-80-inch
    2. Additional: 15 Degrees Of Tilt For Optimal Viewing Angle (+10 To -5 Degrees); Articulating Design Extends Up To 19. 9 Inches From The Wall.
    3. Additional: Made Of Heavy-duty Aluminum And Steel For Reliable Strength.
    Discounted Basics Heavy Duty Articulating 32 Inch 80 Inch (Av Furniture) 7852b
  • Purchase Now
    Loctek Extension Bracket Patterns Articulating (fba r2)

    Loctek Extension Bracket Patterns Articulating (fba r2) 2049

    Today's Deal Loctek Extension Bracket Patterns Articulating (fba r2), 18.8 long extension curved tv wall mount bracket 32-70 inch curved flat panel tvs vesa patterns up to 600 x 400mm/articulating arm swivel tilt max. fits 16 inch wall this ul certified curved full motion tv mount offers an attractive way to display tv while providing most flexible viewing. the arm can easily be adjusted, allowing you to enjoy in -loctek 18.8 long extension curved tv wall mount bracket 32-70 inch curved flat panel tvs vesa patterns up to 600 x 400mm/articulating arm swivel tilt max. fits 16 inch wall stud
    • I have a lg 65" 4k oled which does not have standard mounting locations. However, since the oled is so light, relatively compared to other display types, i was able to use this mount by screwing it into the top mounting locations on the tv and then using industrial strength velcro the entire rest of... go to https://puqus.com/loctek-extension-bracket-patterns-articulating-20490wdsy058/#loctek-extension-bracket-patterns-articulating
    • Add-on: Weight Capacity:99lbs, Ul Certificate With 4 Times(396lbs) Loading Capacity Test.
    • Add-on: Meet Your Different Viewing Angles. Extend, Tilts Tv Up -2 And Down 10 Degrees And Swivel Your Tv Between 3. 3" And 19 " From The Wall, Which Helps To Clean And Collect The Cables.
    Purchase Loctek Extension Bracket Patterns Articulating (Av Furniture) R2

Product Image Gallery

Top-videosecu-articulating-bracket-plasma-400x400-98301obv7t2-Content