Wali Articulating Monitor Extension 200x200mm (1339lm) 2184

Review for tv wall mount articulating lcd

Price was $12.99. Overall great for the price. The main con is the screws like others have said. The screw heads that go on the tv side is the same size as the holes in the plate they hold on. The screw fit through the plate holes unless you off center the plate a little. This work for me as i won t be moving the tv around much, but getting some washers or screws with bigger heads will be needed if you pull much in the tv. I did have to loosen the bolts on the mount to make it easier to swing. Not a big deal, took about 10 seconds to adjust. Other than bolt and screw problem the mount seems well made for small tv s.

-. Kelly

Tv wall mount articulating lcd monitor full motion 14 extension arm 13-39 inch led tv flat screen vesa up to 200x200mm , please check the mount compatible for your tv: please check wood studs in your wall first. the mount can also be used on concrete wall and brick (anchors already included), but it -wali tv wall mount articulating lcd monitor full motion 14 extension arm 13-39 inch led tv flat screen vesa up to 200x200mm 1339lm , black

  • Included: Fully Adjustable: +/-15 Degrees Tilt; 180 Degrees Swivel And 360 Degrees Rotate For Better-viewing Flexibility.
  • Included: Space Save: Places Tv Just 2 Inches From The Wall To Enhance The Look Of Ultra-thin Led Tv. Extends Up To 14″ From The Wall For The Space Saving.

Deals Wali Articulating Monitor Extension 200x200mm (Office Products) Wl 1339lm

Buy Now


Preamble

I have purchase an extender version of the same wall tv mount before and loved it. The wall mount is easy to install and very sturdy. I only wish the tit for the television was more than the 15 degrees it goes which isn't a whole lot but you can tell the difference when you manipulate it up and down. The extension is good and reachs out to over a foot and doesn't seem to cause too much stress on the mount arm or the wall itself. I have mine on about a 15lb tv and i have no worries about it falling out or being too heavy for the mount. Its a great easy to install wall mount that has a lot of articulation and is manipulated easily. Just not good if you are mounting it very high up on a wall for viewing as it doesn't have a lot of downward tilt motion. Happy with it overall an a good buy for price. The Best tv wall mount articulating lcd ( Sep 2019 ) | Wali-Office Products Review Included WALI TV Wall Mount Articulating LCD Monitor Full Motion 14" Extension Arm for Most 13-39 inch LED TV Flat Screen VESA up to 200x200mm (1339LM), Black Compatibility: full motion heavy duty wall mount for most 13 to 39 inches flat panel display up to 33lbs, with vesa 75x75mm to 200x200mm. detail: 75x75mm(3"x3"), 100x100mm(4"x4"), 200x100mm (8 "x 4 "), 200x200 (8 "x 8 ").. Fully adjustable: +/-15 degrees tilt; 180 degrees swivel and 360 degrees rotate for better-viewing flexibility.. Space save: places tv just 2 inches from the wall to enhance the look of ultra-thin led tv. extends up to 14" from the wall for the space saving.. Installation: 5. 9" x 1. 6" wall plate can be mounted on any vertical wood studs, brick, or concrete wall (do not mount on drywall alone).. Package includes: 1 x wali articulating wall mount, 1 x mounting hardware kit, 1 x user manual, 10 year protection .

Wali Tv Wall Mount Articulating Lcd Monitor Full Motion 14 Extension Arm For Most 13-39 Inch Led Tv Flat Screen Vesa Up To 200x200mm 1339lm , Black Review (1339lm)

Simple to install. I like how many points of articulation it had. I have two smaller issues with it the first is that they used cheap screws so it's difficult to tighten them down without stripping them. The second is that to install the mount to the wall, they give you two large bowls was you need a nut driver to install. They place the lower bolt hole so close to a hindge used to move the frame that it's very difficult to fit the driver in as the bolts are very close to rubbing against each other. That was my only frustration during the process. Other than that it gets the job done. -B. Mathis

Wali Articulating Monitor Extension 200x200mm

Rank
Office Product
Brand
WALI
Color
Black
EAN
0811278020733
Product Dimensions
Height:10.00 inches
Length:5.00 inches
Weight:2.20 pounds
Width:14.00 inches
Manufacturer
WALI
Model
WL-1339LM
MPN
1339LM
Total-Items
1
Quantity
1
Part/Serial Number
1339LM
Group-Order
Office Product
Category
OFFICE PRODUCTS
ReleaseDate
2018-10-02
Size
13-inch To 39-inch TVs
UPC
811278020733
Warranty
10 Year Warranty

tv wall mount articulating lcd monitor full motion 14 extension arm 13-39 inch led tv flat screen vesa up to 200x200mm , Office Product, Please check the mount compatible for your tv: please check wood studs in your wall first. the mount can also be used on concrete wall and brick (anchors already included), but it can t be used on drywall. check your tv weight and size, your tv size should be between 13-39 inches, and weight less than 33lbs (15kg). compatible the vesa mounting holes on the back of your tv, the mounting holes must be less than 8 x8 (200x200mm). please check tv cable and input area first, its possible blocked cable or input by the mount. product specifications: fit 13 to 39 flat screen tv. support weight up to 33lbs (15kg). compatible with vesa mounting holes patterns:200x200mm/ 200x100mm/ 100x100mm/ 75x75mm (8"x8"/8"x4"/4"x4"/3"x3"). fully adjustable 15 degrees upward and 15 degrees downward; swivel up to 180 degrees; 360 degrees rotate. extends up to 14 and compressed 2 from the wall to save space. package includes: 1 x wali tv wall mount 1 x user manual 1 x standard mounting hardware Wali Articulating Monitor Extension 200x200mm (WL-1339LM-Wali).

Wali Articulating Monitor Extension 200x200mm Office Product

PROS
  • My expectations were met. I needed to add (1 screw nut) for every m4x12 bolt-f. Please review pictures, each bolt did not flush to the back of lcd tv. . I do recommend product.
  • This wali mount was designed to make installation and use of the mount very easy, something i fully appreciate now. I used a similar product awhile back to put a flatscreen in a basement music room, and had to modify it to put the tilt/swivel adjustment nut on the outside of the mounting bracket so it could be adjusted with the monitor mounted. That one also had no quick release bracket to make the actual mounting easier, you had to remove part of the swing arm and hold it up while bolting the monitor up. Imo about a 70% failure in design and execution on that one. Those two areas are perfectly designed and executed on this wali mount, and the rest of it also works very well. Don't know if there's better ones out there, hard to improve on (nearly) perfect.
CONS
  • This wall mount bracket is a good and useful item. The instructions are very clear, and the parts supplied are wrapped and labelled with letters corresponding to the installation diagram - very clear. However, i'm giving it only a 1 star rating because the screws supplied (part f) are too small. The head of the screws pass through the mounting bracket and thus cannot attach the bracket to the back of the monitor. Unless one has washers, or is willing to go and buy four washers, the item is not usable as shipped. Other than this i would have given it a 4 or 5 star rating
  • Not bad but spacers did not work. Pros:. Good price, works pretty well with a few exceptions. . Cons. -the supplied spacers were to short and too long for this lg tv. (see pics) i had to add washers to make this work. - the back plate that swings side to side will catch on the center arm that comes from the wall making it difficult if you want to swing the tv from one side to the other. . Overall not bad for the price but you may need to tweak things for a complete install.
  • Even though this mount is well built and sturdy, i find the "swivel, rotate and tilt" description a bit misleading. It does do those things but only left to right. It swivels left to right. It rotates left to right, and it only tilts left to right. I wanted to hang my small tv from high on the wall on my porch. I would have to stand on a chair to see see the tv clearly with this mount. It does rotate and adjust left to right, but the tv must be viewed, straight on, at that level to be seen clearly. I thought the "tilt" would, as most mounts do, tilt top out 15 degrees so as to be seen clearly from a chair. No. This tilts side to side 15 degrees. Maybe if you lay on the couch and want the tv tilted to your view, or you have one eye much lower than the other, it may work for you. But if you mount the tv up high on the wall. Out of the way, you can not tilt it down for optimum viewing. I received it today and plan to return it. I'll look for one that will tilt forward and rotate away from the wall. Also, it was not "boxed" or wrapped upon arrival. The label was stuck right to the factory box, with a total description written all over the box so everyone knew exactly what was in the box. Not great for my neighborhood. I'll brown wrap for return so it doesn't get "misplaced" on the way back.

tv wall mount articulating lcd WALI TV Wall Mount Articulating LCD Monitor Full Motion 14" Extension Arm for Most 13-39 inch LED TV Flat Screen VESA up to 200x200mm (1339LM), Black (Switch to Mobile/Desktop Version)

I ordered this wall mount for a handyman to install on my wall for a 24" tv. Everything was there and he installed the mount very easily into a stud into the wall. But, the screws in the package to use on the tv itself, were too long. They would have gone thru the screen. So, he had to find screws that were the right size in order to mount the tv to the wall mount. Maybe you could add a couple sets of different length screws for that. My handyman was very impressed with it otherwise. The arm is easy to move the tv. I really like it!

Wali Tv Wall Mount Articulating Lcd Monitor Full Motion 14 Extension Arm 13-39 Inch Led Tv Flat Screen Vesa Up To 200x200mm 1339lm , Black
Click to see NoticeWali Articulating Monitor Extension 200x200mm (1339lm)"This is one of the few brackets that have a 200x100 vesa arrangement which is required to wall mount the lg 32ma68hy-p best-selling 32" monitor on online store. If comes with all the needed hardware, though the provided bolts and anchors for mounting, if you can't mount directly into a stud, are inadequate to support the weight of a monitor. You need to use your own heavy-duty toggle or anchor bolts. In a finished installation, the monitor will have a minimum 4" distance from the wall."

(0) Question: Can i use it with a 32lbs 28" emerson? mount says 33lbs but that makes me nervous how close it is to the limit.


(1) Question: Does this work with the 29um68-p? , it is 75x75 vesa and is 12 pounds.


(2) Question: Does this allow for quick rotating from landscape to portrait, or does it require tools?



Computer & Monitor Mounts » Projector Mounts » Speaker Mounts » Featured Categories » Gold Merchants » Specialty Boutique » Wali Articulating Monitor Extension 200x200mm (Office Products) Wl 1339lm


KES Bathroom Single Towel Bar Wall Mount, Brushed SUS304 Stainless Steel, A21000S60-2

Specifications -material : sus304 stainless steel -finish : brushed finish -installation method : wall-mounted package includes towel bar screws and anchors buy from kes sus304 stainless steel, will not rust high quality mounting hardware, stainless steel screws and premium quality anchors concealed screws, beautiful and elegant look 15-days return guaranteed

KES Bathroom Single Towel Bar Wall Mount, Brushed SUS304 Stainless Steel, A21000S60-2KES-Bathroom-Brushed-Stainless-A21000S60-2

KES BATHROOM SINGLE TOWEL BAR WALL MOUNT, BRUSHED SUS304 STAINLESS STEEL, A21000S60-2 Summary
Brand :    kes
Color :    Brushed Steel
Size :    Towel Bar
Weight :    0.95 pounds
  • Constructed of stainless steel ensuring durability and dependability
  • Ideal for use in bedrooms, bathrooms, and closets
  • Hardware pack included
  • Sus304 stainless steel will not rust
  • Concealed screws
Price :    $10.66 (was $13.50)
Model :    CECOMINOD056631
Quantity :    1
Order click here :    normally ships in 24 hours
Home Improvement :    Best Plumbing Fixture (kes product review) for KES Bathroom Single Towel Bar Wall Mount, Brushed SUS304 Stainless Steel, A21000S60-2 available ( Sep 2019 )

Element ELEFW328R 32 720p HDTV Certified Refurbished

32" 720p hdtv - element electronics offers state-of-the-art technology, advanced design, unwavering quality, reliability and support - all delivered at an affordable price.

Element ELEFW328R 32 720p HDTV Certified RefurbishedElement-ELEFW328R-720p-Certified-Refurbished

ELEMENT ELEFW328R 32 720P HDTV CERTIFIED REFURBISHED Summary
Brand :    element
Size :    32 inches
Weight :    9.50 pounds
Model :    ELEFW328R
Quantity :    1
Order click here :    normally ships in 24 hours
  • Panel resolution 1366 x 768
  • Built -in 3d vidoe noise reduction
  • On-line user manual: https://cdn. elementelectronics/app/uploads/2017/08/elefj322 user-manual. pdf
  • Over-the-air atsc/ntsc rf input support
  • Dynamic contrast ratio 1000:1
Price :    $88.00
Ce :    Best Television (element product review) for Element ELEFW328R 32 720p HDTV Certified Refurbished available ( Sep 2019 )

Basics Heavy-Duty, Full Motion Articulating TV Wall Mount 12-inch to 39-inch LED, LCD, Flat Screen TVs

This tv mount is heavy duty and very easy to install. Good instructions and plenty of extra tools included. Great item for a very cheap price compared to others.

Online storebasics brings you everyday items at a great value. an online store brand.

Basics Heavy-Duty, Full Motion Articulating TV Wall Mount 12-inch to 39-inch LED, LCD, Flat Screen TVsAmazonBasics-Heavy-Duty-Articulating-12-inch-39-inch

Basics Heavy Duty Articulating 12 Inch 39 Inch (pbh 991) FAQ.

Works beautifully with my 47 lg. Titles and swivels with no problem. I had a cousin put it together and he did it quickly. Highly recommend for the price point and quality -Notice from M. Rita, New Mexico

Click to Show basics heavy duty articulating 12 inch 39 inch (pbh 991) Details

The install kit for this item is great, the instructions and template are true to size. Only took 20 minutes to put up with two people. I like that the tv can also rotate to level even after the bracket is mounted.

Basics-heavy-duty-articulating-12-inch-39-inch-(pbh-991) set picture

- Z. DebraWorks perfectly for my 32 inch tv in my home bar. Rugged and so reasonably priced. Comes with a template for drilling and installation and excellent hardware.

Using this mount to hold a 16 inch flat panel tv to the wall. Unit was easy to mount to the wall and easily handles the tv.

. Connie, Alaska

BASICS HEAVY-DUTY, FULL MOTION ARTICULATING TV WALL MOUNT 12-INCH TO 39-INCH LED, LCD, FLAT SCREEN TVS Spotlight
Price :    $17.06 (was $19.99)
  • Bubble level and all mounting hardware included for easy installation
  • Articulating design extends up to 16. 1 inches from the wall
  • Articulating tv wall mount accommodates 12- to 39-inch tvs (up to 40 pounds) for enhanced home tv-viewing experience
  • 18 degrees of tilt for optimal viewing angle (+15 to -3 degrees); cable-management system keeps cables neatly organized
  • Made of heavy-duty aluminum and steel for reliable strength
Brand :    basics
Color :    Black
Size :    12-inch to 39-inch TVs
Model :    PBH-991
Quantity :    1
Order click here :    normally ships in 24 hours
Home Theater :    Best Av Furniture (basics product review) for Basics Heavy-Duty, Full Motion Articulating TV Wall Mount 12-inch to 39-inch LED, LCD, Flat Screen TVs available ( Sep 2019 )

WALI CS201-1 Floating Wall Mounted Shelf Strengthened Tempered Glasses DVD Players,Cable Boxes, Games Consoles, TV Accessories, 1 Shelf, Black

Very nice. Great value for the price. The only slight drawback is the cable channel, it's okay but difficult to hide cables.

Wali 1 x black floating shelf with strengthened tempered glass for dvd players/cable boxes/games consoles/tv accessories. The wali dvd player wall mount is perfect for any home theater. The sleek 5 mm black tempered glass shelf allows you to mount your dvd player, gaming consoles, or cable box weighing up to 17. 6 lbs. Free up floor space and organize your entertainment center in your living room, family room, media room, den or office. The slim wall plate protrudes 19 mm from the wall allowing you to discreetly organize and hide your messy cables. Adjustable shelf height ensures that your unit is mounted at the perfect height. The wali dvd player wall mount is finished with an all-black coating for a sleek look. The black tempered glass gives an added touch to your home theatre system while providing security and stability when mounting your devices. The ultra-slim design makes a perfect pair with your mounted flat screen tv. Includes complete hardware kit and instructions to mount your dvd shelf to wood, brick or concrete. Complete mounting hardware.

WALI CS201-1 Floating Wall Mounted Shelf Strengthened Tempered Glasses DVD Players,Cable Boxes, Games Consoles, TV Accessories, 1 Shelf, BlackWALI-Floating-Strengthened-Tempered-Accessories

Wali Wl-cs201-1 1x Black Dvd Dvr Vcr Wall Mount Bracket Component Shelf (wl cs201 1) FAQ.

Just what i needed. Attractive style, works as stated. I bought 2 of them, one for dvd player, the other for modem/router. Perfect fit for both. -Notice from M. Angela, Nordrhein-Westfalen

Click to Show wali wl-cs201-1 1x black dvd dvr vcr wall mount bracket component shelf (wl cs201 1) Details

My wife wanted this floating wall mounted shelf because of the cramped space in our bathroom and it works great of course you can put it places with lots of room. The shelves are sturdy and they hold a lot of weight i would highly recommend this item and give it 5 stars because it's great

Wali-wl-cs201-1-1x-black-dvd-dvr-vcr-wall-mount-bracket-component-shelf-(wl-cs201-1) set picture

- N. SusanaThese are pretty easy to mount just don't make the mistake of putting the top black piece on too early because they are difficult to get back off.

Solid shelf for smaller set top box or similar. We have tivo's (premier's and minis) on ours and no issues. Not sure i would want anything bigger or heavier than a normal cable box / tivo though on it.

V. Delgado, New Mexico

WALI CS201-1 FLOATING WALL MOUNTED SHELF STRENGTHENED TEMPERED GLASSES DVD PLAYERS,CABLE BOXES, GAMES CONSOLES, TV ACCESSORIES, 1 SHELF, BLACK Review
Brand :    wali
Color :    Black
Size :    1 Shelf,
Model :    CS201
Quantity :    1
Order click here :    normally ships in 24 hours
Furniture :    Best Home Furniture And Decor (wali product review) for WALI CS201-1 Floating Wall Mounted Shelf Strengthened Tempered Glasses DVD Players,Cable Boxes, Games Consoles, TV Accessories, 1 Shelf, Black available ( Sep 2019 )
Price :    $12.73 (was $12.99)
  • One large strengthened tempered glass shelves (380 x 280mm x 5mm each shelf)
  • Cable management system to hide all your messy cables
  • For dvd/blu-ray players, satellite/cable boxes, games consoles, hi-fi and surround speakers
  • Supports a maximum of 8kg on each shelf
  • Easy to use instruction manual for quick and easy mounting with fittings provided

Suptek Full Motion Adjustable TV Wall Mount Rotation, Swivel Tilt TV Arm Bracket Most 15-27 inch LED, LCD Monitor Plasma TVs VESA 75,100 MA2720

Suptek ma2720 is a articulating wall mount for led lcd tv/monitors, makes it easy to view your tv or monitor from different angles.  tilt, swivel, extend function provide smooth adjustment for all directions. Specifications: 1. Compatible with vesa: 75 x 75mm, 100 x 100mm2. Fits screen size: 15-27'3. Tilt range :15 degrees up/down4. Pan/swivel range: up to 180 degrees5. Profile: 6. 3 - 38. 1 cm6. Maximum load: 13kg(28lbs)7. Color:blackfeatures:1. Great flexibility and adaptability. 2. This mount can swivel side to side and has an adjustment to tilt the screen up and down. 3.  removable tv plate designed for single-person installation. Post installation level adjustment to ensure perfect level. 4. Durable steel construction with black powder coated finish. Common mounting and screen attachment hardware included. Warranty & support:10-year guarantee from date of the original purchase. Damage or problem due to any manufacturing defect, please contact our after-sale service team by email with your purchase order id and details of the problem. Our support team will deal with your problem as soon as possible when we are at work.

Suptek Full Motion Adjustable TV Wall Mount Rotation, Swivel Tilt TV Arm Bracket Most 15-27 inch LED, LCD Monitor Plasma TVs VESA 75,100 MA2720Suptek-Adjustable-Articulating-Rotation-MA2720

SUPTEK FULL MOTION ADJUSTABLE TV WALL MOUNT ROTATION, SWIVEL TILT TV ARM BRACKET MOST 15-27 INCH LED, LCD MONITOR PLASMA TVS VESA 75,100 MA2720 Reviews
Brand :    suptek
Color :    Black
Size :    15''-27''
Weight :    2.20 pounds
Model :    MA2720
Quantity :    1
Order click here :    normally ships in 24 hours
Pc Accessory :    Best Computer Add On (suptek product review) for Suptek Full Motion Adjustable TV Wall Mount Rotation, Swivel Tilt TV Arm Bracket Most 15-27 inch LED, LCD Monitor Plasma TVs VESA 75,100 MA2720 available ( Sep 2019 )
Price :    $13.50
  • Compatibility - compatible with vesa 75x75mm and 100x100mm, fits for concrete wall/wood stud
  • Package - 1 tv wall mount, 3 velcro cable tie, 1 standard installation kit, 1 user manual
  • Full motion - 360 rotation, 180 swivel, 15 tilt, extended to 14. 96" from the wall, meet all of your viewing angles
  • Tv wall mount - ideal for most 15" to 27" led, lcd, and plasma tvs that weigh up to 28lbs (13kg)
  • Features - removable tv plate designed for single-person installation, durable steel construction for lifetime use

Insignia NS-39DF510NA19 39-inch 1080p Full HD Smart LED TV- Fire TV Edition

Insignia hd smart tv is a new generation of smart tvs featuring the fire tv experience built-in and including a voice remote with alexa. With hd picture quality and access to all the movies and tv shows you love, toshiba fire tv edition delivers a superior tv experience that gets smarter every day. The voice remote with alexa lets you do everything you'd expect from a remote-plus, easily launch apps, search for tv shows, play music, switch inputs, control smart home devices and more, using just your voice.

Insignia NS-39DF510NA19 39-inch 1080p Full HD Smart LED TV- Fire TV EditionInsignia-NS-39DF510NA19-39-inch-1080p-Smart

INSIGNIA NS-39DF510NA19 39-INCH 1080P FULL HD SMART LED TV- FIRE TV EDITION Advantages
Price :    $219.99 (was $249.99)
  • Dimensions (w x h x d): tv without stand: 34. 8" x 20. 6" x 3. 2", tv with stand: 34. 8" x 22. 3" x 8. 9". multiple device input/output options: 3 hdmi including 1 with arc, usb, composite input, antenna/cable input, digital output (optical), audio output, ethernet.
  • Easily control your tv with the included voice remote with alexa-plus, launch apps, search for titles, play music, switch inputs, control smart home devices, and more, using just your voice.
  • Fire tv edition seamlessly integrates live over-the-air tv and streaming channels on a unified home screen (hd antenna required).
  • With the fire tv experience built-in, enjoy tens of thousands of channels, apps, and alexa skills, including netflix, prime video, hulu, hbo, showtime, starz, and more.
  • Insignia full hd smart tv - fire tv edition delivers 1080p picture quality for lifelike detail, rich contrast, and brilliant colors.
Brand :    insignia
Size :    39 inches
Model :    NS-39DF510NA19
Quantity :    1
Order click here :    normally ships in 1-2 business days
Home Theater :    Best Television (insignia product review) for Insignia NS-39DF510NA19 39-inch 1080p Full HD Smart LED TV- Fire TV Edition available ( Sep 2019 )

VideoSecu ML12B TV LCD Monitor Wall Mount Full Motion 15 inch Extension Arm Articulating Tilt Swivel 19 -32 , models up to 47 , LED TV Flat Panel Screen VESA 100x100, 75x75 1KX

Videosecu has figured something out. The installation instructions for their mounts all seem to be printed on the front of the box. For a small mount like this, that's brilliant. . That being said, it's a simple configuration. It's supposed to be stiff and adjustable. For a 24" tv, it's perfect. Right now, a 24" tv is mounted right next to a door frame. It's practically at a 180 degree angle from the installation point. It took one man 15 minutes to get the mount ready to go up on the wall, fix the mount onto the wall and while he did that, i was able to attach the vesa mount to the back of the tv, separately. Not all articulating mounts allow for this. . In the photo for this mount, there are four visible bolt covers. In my honest opinion, they aren't necessary and add a bulky look to the whole mount. But that's end user pov. . I didn't give this a fifth star because of difficulty of attaching the arm to the bracket. First, it has to come off. Carefully, too, because there are two washers that can escape during this process. Then the arm goes on the mount after the mount is secured on the wall. . I definitely like the end result. Also, the price. I really like the price.

Videosecu articulating wall mount for led lcd tv monitors, makes it easy to view your tv or monitor from different angles. Fits tv or monitor with vesa 100, vesa 75 mounting hole pattern (these are square or rectangular patterns between 3 and 4 inches per side on the rear of your display), maximum loading capacity 44 lbs. This dual link arm wall mount gives you 15" extension from the wall with maximum flexibility. You can also fold it close to your wall for a low-profile appearance. Removable tv plate designed for single-person installation. Post installation level adjustment to ensure perfect level. Tilt, swivel, extend function provide smooth adjustment for all directions. Durable steel construction with black powder coated finish. Common mounting and screen attachment hardware included. Notice: this mount fits most 19-32" tvs, some up to 47 inch tvs with vesa 100 mounting hole patterns manufactured in recent 3 years.

VideoSecu ML12B TV LCD Monitor Wall Mount Full Motion 15 inch Extension Arm Articulating Tilt Swivel 19 -32 , models up to 47 , LED TV Flat Panel Screen VESA 100x100, 75x75 1KXVideoSecu-Monitor-Extension-Articulating-100x100

Videosecu Monitor Extension Articulating 100x100 (fba ml12b) FAQ.

I purchased this to mount my 21. 5" asus monitor to the wall. I mounted it on a wood stud wall. I used a stud finder to locate the studs, mapped it out, then drilled 2 pilot holes for the mount. Put the bolts in and got them in. You probably will need a better wrench then the one included, because the included one is tiny and extremely hard to use. However for the price of this mount you really can't complain, and most people have some sort of wrench around anyways (even pliers would probably work). So overall the mounting process was fairly simple. Once it was mounted it felt very secure. It could easily hold the weight it says it can, the thing is rock solid once its attached to the wall. Screwing on the detachable vesa plate to my monitor was simple using the included screws, then i just slid it onto the mount, screwed in the two bottom screws, and pushed the screen where i wanted it. Very easy and simple installation overall. You can't beat this price for this excellent mount for small monitors/tvs. -Notice from . Matherly, Darlington

Click to Show videosecu monitor extension articulating 100x100 (fba ml12b) Details

I have a mild bulging disc in my neck and needed to get a much lower desk so that i could have my arms much lower to not inflict more pain on my shoulders and neck. This gave the option for a desk as being the kind that you screw into the wall that can also work as a little mini table or counter that folds down and is literally two and a half feet off the floor and with how small it is i had to mount my monitor for work. This monitor works perfectly because now i am not having to move my neck forward but instead with a size of the desk the monitor works perfectly and have not even had to extend it out. And i finally also get to have the monitor at the correct level to where it needs to be to help with my neck as

Videosecu-monitor-extension-articulating-100x100-(fba-ml12b) set picture

- V. DeniseEasy installation and securely attached to the wall! . . When you're attaching an expensive electronic device to a wall, of course there's a little bit of anxiety involved. I mean, the last thing you need is for the mount to rip out of the wall or for the tv to fall off the mount. Being a little high-strung myself, i made sure to follow the directions exactly. The installation process took about 20 minutes (max) and i made sure to apply a little downward pressure to the mount a couple of times to make sure that it didn't look like it was going to rip out of the wall. . The tv has now been mounted on the wall with this arm for a few months now, and it's just as secure as day 1. I love that i can adjust it to any angle depending on where we're sitting in the living room, including tilting it down so that the kids can watch while sitting on floor without hurting their necks. . My only complaint (which isn't a complaint, really) is that the hinges are a little tight. When i move it out or tilt it up or down, i'm always careful to keep one hand on the bracket mounted to the wall so that it doesn't put undue pressure that could eventually loosen it. It's really a minor inconvenience, and for the price, it's really not much of a bother.

It's a simple, yet sturdy mount, exactly what i was looking for. I didn't have any issues mounting my thunderbolt monitor, although i did have to oil the joints because of an annoying squeak. I ended up having to loosen all the joints slightly so i could maneuver my monitor with ease. The only adjustment i can't seem to get right is the tilt; it's either too tight to tilt or too loose for my heavy monitor. The bolt to adjust the tilting action is a little to get turn using the tool provided when the monitor's mounted. But i suspect if i use the real deal - the actual tool that has both the closed and open end (not sure what they're called but my husband has them in all sizes), i wouldn't have a problem turning that bolt.

. Monique, Dudley

VIDEOSECU ML12B TV LCD MONITOR WALL MOUNT FULL MOTION 15 INCH EXTENSION ARM ARTICULATING TILT SWIVEL 19 -32 , MODELS UP TO 47 , LED TV FLAT PANEL SCREEN VESA 100X100, 75X75 1KX Reviews
Price :    $12.99 (was $13.99)
  • High grade steel material offers loading capacity to 44lbs
  • Common hardware pack included in the package
  • Compatible with vesa (mounting hole pattern) 75x75(3"x3") or 100x100(4"x4")
  • Adjustable 5 degrees forward or 5 degrees backward tilt, 180 degrees swivel, 360 degrees rotate; retracts to 2. 4"save space, extends up to 15" from the wall
  • Post-installation level adjustment allows the tv to perfectly level; removable tv plate designed for single-person installation
Brand :    videosecu
Color :    Black
Weight :    2.65 pounds
Model :    FBA_ML12B
Quantity :    1
Order click here :    normally ships in 24 hours
Home Theater :    Best Av Furniture (videosecu product review) for VideoSecu ML12B TV LCD Monitor Wall Mount Full Motion 15 inch Extension Arm Articulating Tilt Swivel 19 -32 , models up to 47 , LED TV Flat Panel Screen VESA 100x100, 75x75 1KX available ( Sep 2019 )

WALI Floating Shelf Strengthened Tempered Glass DVD Players, Cable Boxes, Games Consoles, TV Accessories CS202 , 2 Shelf, Black

Wali has earned a reputation for delivering quality yet elegant mounting solutions. For customers seeking a reliable floating shelf with strengthened tempered glass, look no further. The ultra-slim wali wall mount has an all-black coating and adjustable shelf height to enhance the look of your entertainment system and free-up floor space. The sleek 5 mm black tempered glass shelf allows you to mount your dvd player, gaming consoles, or cable box weighing up to 17. 6 lbs. The slim wall plate protrudes just 19 mm from the wall allowing you to discreetly organize and hide your messy cables. Complete mounting hardware kit and user manual included for easy installation to wood, brick or concrete wall.

WALI Floating Shelf Strengthened Tempered Glass DVD Players, Cable Boxes, Games Consoles, TV Accessories CS202 , 2 Shelf, BlackWALI-Floating-Strengthened-Accessories-CS202

WALI FLOATING SHELF STRENGTHENED TEMPERED GLASS DVD PLAYERS, CABLE BOXES, GAMES CONSOLES, TV ACCESSORIES CS202 , 2 SHELF, BLACK Spotlight
Brand :    wali
Color :    Black
Size :    2 Shelf
Weight :    9.00 pounds
Model :    CS202
Quantity :    1
Order click here :    normally ships in 24 hours
  • Smart design: elegant floating shelf (with adjustable height) to free up floor space and enhance the look of your entertainment system.
  • Cable management: the slim all-black wall plate (3 inch wide) with built-in cable management on both sides protrudes just 19mm from the wall when installed, providing a clean overall look with cables neatly hidden.
  • Features: large strengthened tempered glass shelf (each glass measures 15 inch x 11 inch x 5mm thick), supporting a maximum weight up to 8kg (17. 6lbs) per shelf.
  • Package includes: 1 x wali floating shelf system (black), 2 x strengthened tempered glass, 1 x mounting hardware kit, 1 x user manual, 10 year warranty
  • Environment: quality wall mount solution for holding dvd/blu-ray players, satellite/cable boxes, games consoles, hi-fi and surround speakers, etc.
Price :    $18.59 (was $19.99)
Home :    Best Home (wali product review) for WALI Floating Shelf Strengthened Tempered Glass DVD Players, Cable Boxes, Games Consoles, TV Accessories CS202 , 2 Shelf, Black available ( Sep 2019 )

Toshiba 32LF221U19 32-inch 720p HD Smart LED TV - Fire TV Edition

Toshiba hd smart tv is a new generation of smart tvs featuring the fire tv experience built-in and including a voice remote with alexa. With hd picture quality and access to all the movies and tv shows you love, toshiba fire tv edition delivers a superior tv experience that gets smarter every day. The voice remote with alexa lets you do everything you'd expect from a remote-plus, easily launch apps, search for titles, play music, switch inputs, control smart home devices and more, using just your voice.

Toshiba 32LF221U19 32-inch 720p HD Smart LED TV - Fire TV EditionToshiba-32LF221U19-32-inch-720p-Smart

TOSHIBA 32LF221U19 32-INCH 720P HD SMART LED TV - FIRE TV EDITION Overview
Brand :    toshiba
Size :    32 inches
Model :    32LF221U19
Quantity :    1
Order click here :    normally ships in 1-2 business days
Home Theater :    Best Television (toshiba product review) for Toshiba 32LF221U19 32-inch 720p HD Smart LED TV - Fire TV Edition available ( Sep 2019 )
Price :    $129.99 (was $179.99)
  • Toshiba hd smart tv - fire tv edition delivers 720p picture quality with deep blacks and rich colors.
  • Fire tv edition seamlessly integrates live over-the-air tv and streaming channels on a unified home screen (hd antenna required).
  • Dimensions (w x h x d): tv without stand: 29" x 17. 2" x 3. 3", tv with stand: 29" x 18. 6" x 7. 1". multiple device input/output options: 3 hdmi including 1 with arc, usb, composite input, antenna/cable input, digital output (optical), audio output, ethernet.
  • Easily control your tv with the included voice remote with alexa-plus, launch apps, search for titles, play music, switch inputs, control smart home devices, and more, using just your voice.
  • With the fire tv experience built-in, enjoy tens of thousands of channels, apps, and alexa skills, including netflix, prime video, hulu, hbo, showtime, starz, and more.

Insignia NS-24DF310NA19 24-inch 720p HD Smart LED TV- Fire TV Edition

Insignia hd smart tv is a new generation of smart tvs featuring the fire tv experience built-in and including a voice remote with alexa. With hd picture quality and access to all the movies and tv shows you love, toshiba fire tv edition delivers a superior tv experience that gets smarter every day. The voice remote with alexa lets you do everything you'd expect from a remote-plus, easily launch apps, search for tv shows, play music, switch inputs, control smart home devices and more, using just your voice.

Insignia NS-24DF310NA19 24-inch 720p HD Smart LED TV- Fire TV EditionInsignia-NS-24DF310NA19-24-inch-720p-Smart

INSIGNIA NS-24DF310NA19 24-INCH 720P HD SMART LED TV- FIRE TV EDITION Pros
Brand :    insignia
Size :    24 inches
  • Fire tv edition seamlessly integrates live over-the-air tv and streaming channels on a unified home screen (hd antenna required).
  • Dimensions (w x h x d): tv without stand: 21. 9" x 13. 5" x 2. 7", tv with stand: 21. 9" x 15. 3" x 6. 8". multiple device input/output options: 3 hdmi including 1 with arc, usb, composite input, antenna/cable input, digital output (optical), audio output, ethernet.
  • Insignia hd smart tv - fire tv edition delivers 720p picture quality with deep blacks and rich colors.
  • With the fire tv experience built-in, enjoy tens of thousands of channels, apps, and alexa skills, including netflix, prime video, hulu, hbo, showtime, starz, and more.
  • Easily control your tv with the included voice remote with alexa-plus, launch apps, search for titles, play music, switch inputs, control smart home devices, and more, using just your voice.
Price :    $119.99 (was $149.99)
Model :    NS-24DF310NA19
Quantity :    1
Order click here :    normally ships in 1-2 business days
Home Theater :    Best Television (insignia product review) for Insignia NS-24DF310NA19 24-inch 720p HD Smart LED TV- Fire TV Edition available ( Sep 2019 )

wali tv wall mount articulating lcd monitor full motion 14 extension arm for most 13-39 inch led tv flat screen vesa up to 200x200mm 1339lm , black Price : 12, was : 0 as 2018-12-28
USUKDEFRESITJPCNCAGlobal
United States
Great Britain
German
France
Spain
Italy
Japan
China
Canada
World Wide
Wali Articulating Monitor Extension 200x200mm (1339lm) Reviewed by on puqus.com

Top wali articulating monitor extension 200x200mm (1339lm) Content

The F.A.Q. for wali tv wall mount articulating lcd monitor full motion 14 extension arm for most 13-39 inch led tv flat screen vesa up to 200x200mm 1339lm , black

When i got the product the overall quality surpassed my expectations. Upon installation however, the bolts provided would not properly function with the wall anchors because the shoulder was too long. Nothing a trip to lowes and 64 cents for the pair couldn't solve. I purchased 2 bolts with a slightly larger diameter and no shoulder, so they were about a quarter inch shorter but they work perfect. Once i got my small monitor mounted it moves easily and once you get it where you want it it stays in place.

A number of questions have been asked here.

Showing 20 Q&A on WALI-Articulating-Monitor-Extension-200x200mm

(0) Question: Can i use this for the supersonic sc-1311 white 13. 3" led widescreen hdtv 1080p television w/ hdmi? i want to mount it in the kitchen.


(1) Question: What size of screws does this come with? my tv says itll need m4


(2) Question: How many holes do i need to put on the wall for a 43" tv that's 25lbs?


(3) Question: I don't have a 4mm drill bit, nor does any of my friends. what size drill bit can i use instead?


(4) Question: Could i tilt this so it would angle to the left or right for a dual monitor setup?


(5) Question: Does this fit 75inch samsumg qled 80pounds?


(6) Question: Is this mount fit lg electronics (24lj4540) ?


(7) Question: Think i could mount on door frame to view straight ahead and also view it 180 degree rotated looking at it thru the hallway to the door frame?


(8) Question: What is the distance from screw to screw of the bracket that mounts to the wall for the 13-39"? i am trying to match it up to existing holes.


(9) Question: Will this work with lg 34uc79g-b 34 inch ultra wide gaming monitor?


(10) Question: Could this be used with heavy duty command strip? i am in college and can't put holes in the walls.


(11) Question: What is the footprint of the part that attaches to the wall?


(12) Question: Does this pull forward after a while from the weight of the monitor?


(13) Question: What is the length of the two arms ?


(14) Question: Anyone mount this on wallboard ?


(15) Question: How do you loosen up the joint closest to the tv? mine won't budge


(16) Question: Does this fit a samsung model lnt2653hx/xaa?



(note) Question: where/how to get Wali (manufacturer's brand) accessories & similiar Wali's products

Click to Show/Hide the Answer
Answer:

Click on the marked text to copy to Clipboard

Great arm i use for work station monitor next to my desk so the monitor is out of the way until i need to use it to either setup a new pc or repair an existing pc. Very sturdy and easy to install!


Accessories & Supplies 704182, Audio & Video Accessories 235271, Electronics 282271, TV Accessories & Parts 466271, TV Ceiling & Wall Mounts 697067Top Wali Articulating Monitor Extension 200x200mm (1339lm) FAQ Content

Best wali articulating monitor extension 200x200mm (1339lm) in review

So, the joints that were stiff (as you can read in other reviews) were so stiff i considered whether i'd need to return this. Instead, i spray pam on them and wiggled them, and wiped off the excess, and then i found this mount to be phenomenal! . . Installed it without any difficulty. I would say that you should consider where you are mounting it, and get your own hardware if the supplied hardware isn't appropriate. (that to me is common sense. ). . Anyway, i could not be more pleased. . But: the overall distance used by the mount and monitor might be a consideration. From the mount to the center of the monitor is approx. 11 inches. That means if my monitor were wider than 23" the mount itself would interfere with how nicely it folds back. But my monitior is only 17" so i still had another 2. 5" from the edge of the monitor to the mount.

Y. Palmer, Idaho

You might like to see Tilting Tv Wall Mount Bracket 42-70 Inch Led, Lcd Plasma Flat Screen Tv, Mount Up To Vesa 600mm 132 Lbs. Pre-labeled Installation Hardware Included: M8 Lag Bolts (4) Lag Bolt Washers (4) 4mm Allen Wrench (1) Only For Concrete Wall Anchors (4) M4 X 12mm Screws (4) M4 X 30mm Screws (4) -Mounting Dream Tilting Tv Wall Mount Bracket 42-70 Inch Led, Lcd Plasma Flat Screen Tv, Mount Up To Vesa 600mm 132 Lbs. Md2268
  1. Properties: One-piece 24' Wide Wall Plate Without Assembling Requirement, 3-step Easy Installation With Decent Instruction, All Included Hardware In Pre-labeled Bags. Pulling Straps Lock And Release Tv Breezily. Comes With A Level And Cable Ties For Cable Management. This Mount Ships With Hardware For Both Wall And Tv Mounting, Including Bubble Level. Concrete Anchors Are Not Included. We Will Ship To You If Needed. All Our Tv Brackets Are Not For Dry Wall Alone Installation!.
  2. Properties: Tilt Your Tv Forward To Reduce Glare For Better Viewing.
Inexpensive Mounting Dream Tilting Bracket Md2268 (Antenna) Md2268 Mounting Dream Tilting Bracket Md2268
Or you might like to consider Electronics 24-inch 720p led tv 2017 troubleshooting cannot control the tv the remote control : check if anything such as tape has been placed over the receiver. check if there is any obstacle between the product and -lg electronics 24lj4540 24-inch 720p led tv 2017 model
  • Advantage: No Smart Functionality; Panel Type : Ads.
  • Advantage: 720p Hd Resolution For A Crisp Picture. Wall Mount Vesa: 75x75.
Deals Lg Electronics 24lj4540 24-inch 720p Led Tv 2017 Model (Television) 24lj4540 Lg Electronics 24lj4540 24-inch 720p Led Tv 2017 Model

S. June, Pennsylvania says

I got tired of the tv taking up space on my kitchen table, so i went looking for a mount like this at one of the big box hardware stores. It was $49, more than i wanted to pay. I took a chance on the wali at a fraction of the price, figuring you get what you pay for. It turned out to be just what i needed. . What was particularly nice was that all the small parts were in a plastic ribbon, with an identifying letter over each section. There was no guessing about which part was a, b or c. It took longer to find a stud to mount it to than it did to put up the unit and attach the set. Everything matched up perfectly.

O. Joanne, Rhone-Alpes

I put an older model 32" on this mount so the tv is a bit heavier than current generation models of the same size. This mount works like a dream. I didn't know that i would be able to move the tv about the axis at the end of the mount in addition to the obvious left / right operation so this was a bonus. Strongly recommend. Outperforms mounts that i purchased 3 years ago at more than triple the price. Suggest that you order some black zip ties to attach power and hdmi cable to the mount to make for a top notch installation.

A. Denise, Hessen says

Update: i was missing a part, but it's been taken care of now. . I have only attached the arm to the wall. I haven't attached the adapter and plate to the back to the tv so i can hang it, yet. I will update again when i do. . Sidebar:. I don't understand the reviews saying "doesn't work with a 20" tv. Sure it does. The screen size is completely different than the way it mounts. I am mounting a small tv, probably 24", but it is a 200x200, so i have to use the adapter. . All you have to do is find out the distance between the mounting holes on the back of your tv before you order and make sure it is compatible - not the screen size. The screen size matters, too, but just because your tv is the right screen size doesn't mean it will have compatible mount holes. . Just measure the distance (8in in my case, aka 200x200) and see if it will work with your tv before you order.

. Cathy, Arkansas

The only reason this product lost a star is because when we received it the mount was really hard to move around. Nothing a little wd40 couldn't fix but glad i had some on hand.

K. Jackson, Torbay says

This replaced the bulky tray type with very little effort. Mounted to th etv and the wall easy-peezy. Very happy with the construction of the unit and function once installed. No issues at all.

. Judith, Thurrock

This is a great product. It's solidly built and fit my 200mmx200mm mounting holes on my television. It was easy to install, the directions were clear and left no guess work on how to properly install and use the mount. The mount itself is a 5 star, but i knocked a star off because the fittings are really tight at the articulating points on the arm; especially the point that attaches closest to the television. I have to work the arms back and forth for 15 or so minutes to get the joints loosened up enough to mount, and another 10 minutes to get them loose enough to use. I'm currently supporting the arm when moving the angle as i'm afraid that it may rip out of the wall or out of the back of the tv if i don't offer a counter resistance to the direction i want to move the arm. It's loosening up since i've been using it, but right out of the box it's very tight. . Overall, this is a great product. It offers great viewing no matter where i am in the room. I mounted a 24 inch tv on this and use it in my exercise room. No matter if i'm on the treadmill across the room, the spin bike in the middle of the room, or on the row machine closest to the tv i'm able to see the screen with no problems. . I'd buy again if i ever need to mount another small tv.

. Jessica, Cumbria says

I purchased this mount to use in my r v. I mounted it inside the entertainment cabinet on the side, which allows me to swivel it to the livingroom side on the front or to the bedroom on the back. The mount is very sturdy and does not sag even a little. I did a lot of research before buying this particular mount, and i must say i am very pleased, with the mount and the price. Very excellent product.

W. Guest, Ile-de-France

I had purchased a small television for watching during treadmill time, and had set it up on the treadmill. During walking, it moved as the treadmill moves wit speed, swaying a little with the walking. I looked at electronic stores for wall mounts, almost all were for heavier tv's. And they were pricy and huge, the over kill. When i saw this as well as the price, i took a chance assuming that i would not be out great bucks. This arm fits in well to the wall, it has proved to be the right size for the small tv, and is adjustable. The only issue were the wire ties, but i solved that with other ties. . I love the set up!

T. Wimbish, Colorado says

Fantastic product! fit my 24 inch perfectly! mounting took about 30 minutes but was easier than i thought. Very stable and versatile in movement. I could not find a tinier mount till this one! 2 other companies failed me with their bulky mounts! thank you!

F. Anonymous, Barnet

Works perfect for my 19 led tv in my camper trailer. I have to bolted into a stud directly. Installation was easy. This comes with a small wrench for tightening the lag bolts to the stud, and to tighten the rotating nut on the vesa mount. You will need a phillips head screw driver as well. I ended up using my own adjustable wrench for the lag bolts. The wrench that came with it wasn t quite the right size (slightly large). Joints are all tight (a bit too tight i think) but it keeps it s place when moved. The screws that came with it for the back of the tv were too long. Ended up having to use some washers as spacers to accommodate the length. For the price, i m happy.

U. Allen, Texas says

Once in a while you find a real "no-brainer" and this is one of them. This is heavy duty and very well made - zero room for improvement at this very low price. Earlier reviews withdrew stars because of difficulty in movement or flexibility. Excuse me, but that is why they made it adjustable in tightness and even gave you a wrench. (duh. Hello). Installation and setup could not be easier. Great buy! . My tv is the 24-inch insignia brand led with standard 100mmx100mm x-mount on the back of the set. Very secure.

P. Finch, Wiltshire says

This thing is stupid east to install. It comes with two dry wall anchors for the lag screws. I didn't use these, but rather went straight into the studs. I could hang off it if i wanted. That limits placement intervals to every 16", but makes for a cleaner hole and much easier to fill later when you remove it. I am sure the fasteners would work, but it's sloppy. The mounting of the plate to my 24" vizio didn't work perfectly with the two sets of screws they offer. One was too long, one was too short, so i had to use washers and discard the rubber spacers. Not their fault, just a slight incompatibility with tv. It's a small issue if you have enough grey matter. . This thing was about a fifth the price from what wally world was offering for a similar product. . It's a no brainer.

D. Pearce, New Jersey

Great product. I used this to mount a monitor to the wall for my wives office. Light weight and sturdy. I did not use any of the mounting hardware provided. Since my only option was mounting to sheetrock i used two 125lb butterfly anchors.

N. Donna, Walsall says

Quite good wall-mount support for most flat panel tvs sizes up to 30". The supplied hardware is more than adequate for mounting the average tv. The included diy instructions are also quite simple and easy to follow. However, just be careful when installing smaller tvs onto the inner mounting holes of the bracket 75x75mm (3"x3") to avoid obstruction of nearby connectors. Unfortunately in my case, i had to first saw off a bit of the outer bracket up to the 2 outer holes in order to fit a 19" rca tv. Despite this minor and possibly unexpected hassle, the mount offers sturdy support and good maneuverability.

. Suzanne, Midi-Pyrenees

Easy to install. I used this with my 24" dell monitors that are mostly for gaming. Works as it is intended. Although the drywall mounts are not meant for shallow drywall. I went to home depot and bought some drywall mounts that we perfect for my drywall and some washers to make the screws hold it more secure. Works perfect. Looks great! . . Update as of 9/3/17: i actually ended up buying a second one of these for my monitors. I love it!

X. Williams, Delaware says

Happy i found this on online store! great price! i love how i can move the tv in different directions.

R. Sally, Sefton

If it wasn't for the price, i would have given this 3 stars. You get slightly more value than what you pay for on this unit. The instructions are not really helpful, but it also isn't hard to install. The bolts that come with it aren't that good, but they work. Assuming you are installing it in one location and keeping it there. It is sturdy and you can adjust it a lot. The minor adjustments can be a little tricky, but once you can it right, it's okay. . All in all it's good for the price, but if you are comparing it to expensive models, you will see a difference in quality and usability.

H. Carol, Luton says

Well, i have mixed feelings on this one. The four mounting screws for the back plate wereally too long. If a person is handy and has the tools to shorten them by 3/16" and a half hour to spend fixing something that shouldn't need fixing, it would get five stars. Otherwise this mount is very heavy duty. I might call it overkill for a 5 lb. 19" tv in my rv but entire adequate for a 32" flat screen in a bedroom. So it's four stars instead of five. Worth the price if your handy or have a hardware store close by, which i dont.

I. Jacqueline, Haute-Normandie

This is a very good wall mount for a very good price. Best buy, where i bought the tv, wanted 5 times the price for a similar mount. It is sturdy and very adaptable. I used it on a samsung 32" tv. My only complaint is that the wall flange needs to be taller so as to allow more space between the heads of the lag bolts and the first section of the arm. It is a little tricky to fit a socket over the head of the bolt because there is not quite enough clearance, but it is possible and i did manage to get them tight. I had the same issue with the articulating mount on my larger tv (a different brand), so this seems to be a common oversight on this type of bracket. I took away 1 star because of this.

G. Margaret, Wigan says

Wali articulating tv lcd monitor wall mount full motion 14" extension arm for most 13" 15" 17" 19" 20" 22" 23" 24" 26" 27" 30" led tv flat screen (wl-1330lm). . Mounted my new 32" led tv with this unit. It works nicely! . . I did have to find some washers to use for the screws that mount the bracket to the back of the tv. I have lots of random hardware in the garage so it wasn't a big deal. The holes in the mount are larger than the head of the screws. I don't see why four washers can't be included with the rest of the hardware that comes with the mount.

Z. Garner, Sheffield

Works great and was easy to install! i installed it directly into the stud- would not personally recommend installing into drywall. (a stud finder is cheap and easy to use and will save you a lot of money compared to fixing a hole in your wall and replacing a broken monitor! ). One thing you should know is that this uses metric measurements in the instructions, so make sure you have the right drill bit size. I used an american 3/16 size bit and that worked great. You will also need a little wd-40 or other lubricant for the joints to get this thing budging. It will be very stiff without any oil. The last thing worth noting is that the rotation feature is really handy if you ever use your monitor vertically, but can be a little annoying when you're trying to get it level as it has a tendency to turn a bit to one side.

V. Hakala, Mississippi says

Great mount 4 stars cause the bolts are crap and stripped very easily. I recommend getting good quality bolts 1/2 inch.

. Jennifer, Kentucky

I would say 3. 5, but i can't do half stars, so going 4 because overall, it does the job it was bought for, but had some inconveniences to it (i mean, it is cheaper than other options, so it is expected. ). . Used this to mount my child's 22" tv during their room renovation project. It comes with two large screws, however these screws have no face on them, so you will need to utilize a socket set. I do not remember the size off top of my head, but they are larger than typical screws. Luckily i had some out of a car socket kit that worked, because otherwise this would be much more difficult. Make sure you got one! . . As far as the "need" part, since it doesn't have a face you can't use a power drill, so they want a pre-drilled hole to screw into. I did not have one, so i sacrificed one of my phillips bits to make a makeshift hole, then powered my way in with the socket to make it go through. It works, but having the drill bit would of made it much less stressful. . However, it is in tight, swivels all the ways it advertises and secures the television well. There has been no fear or worry about it dropping the tv, breaking position due to poor screws, etc so to that end, i am happy with it. . Just make sure you have a socket set (it will need to be small handle, or have one of those thin arm extensions since the space between the screw and the arm is pretty small. Mine are not screwed into the all all of the way as i do not have one of those extensions, but it's tight enough that there is no worry of it coming out. It's only by maybe an inch or so from fully in the wall. If look is as important as function, you'll want to get a socket arm extension as well so it can fit in that small space. )



Top tv wall mount articulating lcd Review

Disadvantage and Critical reviews

Q. Campbell, Alaska says

This articulating mount did not work in our travel trailer at all. We had hoped to mount a 24 inch samsung tv in our trailer for use during our vacations. The mount, although it seemed to fit the tv properly, was completely unstable when the travel trailer was in use on the road. Therefore we had to return it and replace with a wall hugging "tilt capable" tv mount which did not "bounce" when the travel trailer was in transit. I believe that you should make note that this type of tv mount is not designed for a travel trailer/rv which moves at highway speeds.

U. Gilmore, Picardie

I got this to mount a 24 flat screen in my camper. It needs to swivel 180 dog so you can watch either from the bed or dining table. 2 of the 3 swivel points use a bolt and nut so you can adjust the tension. The 3rd joint is a rivet type fastener that can t be adjusted. This joint was so tight you couldn t move it without possibly breaking the tv. I had to drill it out and replace it with a bolt.

F. Evelyn, Bromley says

Ok so, here is the story. All came well packaged and would have been easy to put together, but none of the screws fit my tvs. So i had to go to the store and find extra screws to mount my t. Vs. A good product would come with everything and yes i realize not every tv is similar, however the extra cost to get it to function caused the stars to fall off. Ps: it is a shame because it is a very sturdy mount for the price. Pss: all the reviews saying the joints are waaaaay too stiff are correct.

O. Hakala, Bracknell Forest

This monitor wall mount would be fine if you were going to mount a small tv and would never have to tilt or swivel. I bought it to mount my pc hp 24" monitor to the wall. I found the tilt/swivel mechanism is so bad it really is unuasable for reasons that the nut that tightens the swivel is in a very inaccessible place and is restrichted to the point that a narrow wrench is necessary to access the nut, the wrench supplied is useless. I had a suitable alternative in my toolbox, so that was not a deal breaker. When tightened sufficiently to where the monitor does not wobble, it is very difficult to turn it or swivel tilt it, so bad it feels like something is going to break as the movement is in a series of jerks - far from smooth! if loosened it moves around to easily and will not stay put until the nut is tightened up again and by that time it has changed position so you are back to all the jerks. Apart from that, the hardware seems very solid, but i am returning it as, to me, it is completely useless. I am giving this 2 stars, but if it was for a small tv in a fixed location i would have given it 5 stars.

Z. Alexia, Nebraska says

Pros. It's not a bad wall mount and works well once a 24 in monitor is mounted. I prefer this ball pivot-action that's versatile and offers more pivot angle adjustment than some of the others. . Cons. The mounting holes to monitor (on 100mm center) are bigger than they need to be and are actually same size as the 'head' of the provided screws (note: screw heads will actually fit thru these holes). These large holes would be almost negligible if washers were included. There's no reason or advantage to having over-sized holes since there are probably no tvs or monitors made with screw holes this big. Not a bad problem but noticeable. Oh, plus the protective lag bolt caps don't fit on the lower wall mounting base-bolt because of interference with intersecting pivot bolt. Again, not a big deal. Are there better wall mounts available? probably but maybe not at this price. . Overall, it's okay, works well and does what i needed it to.

. Whiteman, Ealing

I got this to hold a small computer monitor in my rv, but it s useless - the single bolt that attaches the vesa plate to the bracket comes loose on its own and the result is that the monitor just obeys gravity, in this case spinning upside down and angling backwards. Part of the problem i admit is the poor design of the monitor placing the vesa mount below the center of gravity, but the mount shouldn t be so loose. I wouldn t buy the same one again, will probably spend more in hopes of better quality.

C. Anonymous, Herefordshire says

Extremely frustrating product. As another reviewer stated, a totally flawed design where the bottom bolt does not fit in strait or all the way-why would you manufacture it that way? as another reviewer stated, the screws for the back of the tv are too long, so i ll have to go buy new ones- why would you include these? as another reviewer stated, the joints are so damn tight, it s stupid- why would you manufacture it that way? see a pattern? . I now have to stop my install and take screws to the hardware store for someone to help me find shorter screws, and not finish the install today. Ridiculous

. Medina, Illinois

Quality construction with one flaw- the swivel tension points are extremely tight and not adjustable resulting in making it difficult to easily swing the unit into the desired position. This is a negative for me because i wanted to easily swing my small monitor into position everyday only when needed. I returned the unit and purchased the video secure ml12b which has swivel tension points that can be adjusted, very satisfied with that unit and it was slightly less expensive!

T. Matherly, North Dakota says

I really liked the wall mount and it seems like it is very well made, but one problem, the joint closest to the tv will not articulate. I was able to loosen the other two joints with a wrench, but the joint closest to the tv is not able to be loosened. My fear is that my kids will pull too hard to adjust the tv and it will eventually break either the tv or the joint. Poor design on the joint. I have returned my purchased because of this design flaw.

H. Judith, Peterborough

The mount wasn't ideal for a corner in our situation as we didn't end up having the studs in just the right places to mount something so heavy. And it's super duper heavy. We found a lighter weight option at home depot that could be center mounted and still work in the corner and articulate out as needed. . This may work for other scenarios, but the fact that it had to be placed just so at the right measurements makes it complicated and inconvenient. We returned it.

. Smith, Milton Keynes says

Right out of the package you will notice that the hinges do not move at all. It is like it was welded together because it's that tough to try and move the hinges. If you are a strong person, you can try to loose the nut and bolt that holds the hinge from the wall and the middle hinge. As for the hinge at the end that connects to the tv, there is no nut and bolt for that because that one is riveted in and literally you will hurt yourself trying to move that hinge with your hands. You don't want this product unless you are willing to kill yourself to adjust the tv position. Normally the toughest part about using a tv mount would be to correctly install it to the wall, but in this case, it would actually be positioning the tv the way you want it after mounting it to the wall. Luckily i didn't try to mount this thing because i couldn't get the hinges to move.

W. Sandra, Delaware

First of all, the mounting screws included for securing the vesa plate to your screen are too small. They are a few millimeters larger than the screw hole. There is a good chance that with the slightest manufacturing error, your screen will fall off this mount due to this issue. My product did not adjust fully. The mounting plate would not move on the arm without using so much force as to damage the plastic shroud on my tv. Also, i purchased this thinking there would be tilt adjustability. Apparently, the only tilt is moving the screen's orientation. Also, this requires tools.

J. Ruby, Colorado says

Pros:. Cheap, good construction, great materials, makes you feel secure about your mount, relatively simple. . Cons:. Not as easy to operate as other products, but still functional. My main complaint is the bottom screw hole that is partially blocked by the swinging arm bracket (the screw head that is in the pivot point) which does not allow you to screw in the bottom screw completely unless at a angle, which would not allow you to have a flush screw head. Hopefully the picture helps. . Overall, decent buy for 10 bucks. Though, i would not buy again personally. I do not plan on returning it either.

. Valdez, Montana

While the mount itself is of decent quality and toughness, the mount is stiff and difficult to adjust. . If you are mounting this simply to sheetrock (a small mount like this with a light led tv is acceptable for sheetrock only) be ready to take the sheetrock anchors provided in the kit out of the bag, walk directly to the trash can and throw them away. Either stop by lowes and get some real anchors or mount this into a stud with the provided lag bolts. Although some may have better luck, i snapped the head off of all four (i bought two mounts) lag bolts tightening them. Now i am not mr. Olympia, so that can't be the reason that using a half inch open ended wrench to tighten these bolts caused me to snap them off- so while you are at lowes, go ahead and pick up some lag bolts too. Before you mount these, loosen the nuts on the pivot arms and the rotation axis of the mount. Someone who is mr. Olympia puts these things together. Believe it or not, after a few tweaks, they are good mounts.

M. Glenda, Derby says

Decent wall mount, just be prepared to make/purchase washers for the small screws, as the hole size in the tv mounting bracket is larger than the diameter of the tv mounting screws. Was able to fashion some impromptu washers from wire to keep the screws from passing straight through the bracket. Otherwise pretty good.

X. Cortney, Michigan

The weak link of this mount is the tilt/rotate tensioner which requires a wrench to change the orientation from landscape to portrait. I'd have gladly paid double for a mount that had a knob for this but couldn't find one like that. Overall it's very solid and affordable. The provided vesa mount screws were too long for my monitor but i got the ones i needed at the hardware store. Happy with the purchase and no concerns that my monitor will fall off the wall. . - update -. . Bought a second one and took my sweet time to install. Tensioner screw on the 2nd one stripped as i was trying to tighten in. It's 2 days too late to return it, not that that would be much consolation dealing with a $12 purchase. The tilt/rotate tensioner design is junk.

. Rhonda, Indiana says

I had to purchase my own screws and mounting equipment to install the kit into the wall because the screws and hardware sent with the kit are awful. The anchors are incredibly flimsy and don't expand properly, the screws are all poorly threaded, it's awful. On top of all of that, one piece has to be loosened to move and then you tighten it again when it's how you want it - it came extremely crooked and tightened so firmly that it was almost impossible to loosen enough to make straight. If i hadn't finally gotten this horrible thing installed already, i would send it back for a refund.

R. Pete, Prince Edward Island

This mount is not for the weak. It s extremely tough to angle and part. The bolts are air tight. Not even silicone loosened them up. The bolts did not even fit in my universal mounting holes in the back of my tv. The tools and parts they provide are confusing and very much a unnecessary headache. I m going to spend the extra few bucks and purchase a more user friendly plug and play type tv mount.

N. Lawrence, Newfoundland and Labrador says

This is mount is not very good most of the other one star reviews are very accurate. Holes to big so screw heads slip through , screws to long for tv and will not tighten, very tight to to move around . It is a cheep stand and so one might say you get what you pay for . I was shipped a used mount that had been returned before and had pieces missing. Will be returning it !

L. Alberta, Croydon

Fit my samsung 55 led perfectly and functions as expected but i move the tv very carefully because i don't feel i can move it confidently without extreme care because it feels like the bracket is almost overpowered by the weight. That's the best way i can think to describe this real life experience with the product. If i had to do it again i'd find a more sturdy product that can manhandle the weight of the tv without having to do it so gingerly.

P. Anderson, Kensington and Chelsea says

Two major flaws essentially make this hangar go from four stars to one. First, when using the extension arms for wide format vesa mounting, the m4 screws provided for mounting the plate to the tv won't work. The heads are too small for the oversized holes in the extension arms and would pull right through. I had to source sponge washers to make that work. Also the long version of the m4 screws meant to be used with the spacers, are far too long. They bottom out in the vesa mount holes. Second, the screen tilt function is accomplished with stone age engineering, a steel cup, rubber washer, and a single tension bolt. It's simply flimsy, weak, and impossible to adequately adjust. The tv seems to move in any direction but the one you want it to. Junk.

A. Angela, Aquitaine

The title of this post says it all first the pictures shown for the wali tv wall mount wl-1330lm "thankfully" do not match what i received, if you look at the pictures you'll see there are 3 joints where the arms pivot they show a press type connecting pin with black caps. I bought 2 of these and on both of them they had button socket head screws with nyloc nuts on the middle joint and the joint where it mounts to the wall, for the joint at the end where the tv plate mounts it was the press type connecting pin and that's where the problem/flaw is. They pressed that pin so much that joint would not move at all and when i tried to move it i started to bend the little plate that the bigger tv plate mounts to, with the screw & nut you can tighten and loosen the joints to your liking. Why they didn't use the screw & nyloc nut like they have on the other 2 joints is a mystery nor is there any reason for that joint to be that that hard to move, also because i couldn't move that joint and the position it was in it would be very hard to install the 2 little screws that locks the tv plate to it. I might be nit picking here but they supply you with a few zip ties to secure your power cable with but with this mount being gloss black and the tv power cables being black why would they give you white zip ties? because of how hard that joint is to move (even tried to move it pliers and it still barely moved) i would not recommend this to anyone that is looking for a easy tv/monitor mount. I bought these to use as custom speaker mounts so i knew that i "might" have to modify them but never thought i'd have to fix or replace something because of a design flaw, so i'll be drilling that press type pin out and replacing it with button socket head screws with nyloc nuts, more work and money.

B. Melissa, Nebraska says

Mount itself is okay. Mounting hardware for drywall mount is pure junk. Drywall mollys are too large and bolts will not draw down snug, instead just spinning. I had to use toggle bolts since i had already drilled 10mm holes per directions before finding the bolts were loose in them.

I. Guest, Alabama

Gets the job done, but you get what you pay for. Just arrives in a plastic bag. Install instructions not the greatest (doesn t mention needing to remove nut holding on the arm to screw in the wall mounting bolt - but you won t realize that until you re trying to screw it into the wall) and the end that is supposed to allow left and right swivel of the tv was so tight it nearly snapped the plastic on the back of the tv. And there s no way to loosen it. But the tv is up now and i don t need to move it very often so i guess it worked.

S. Moore, Nordrhein-Westfalen says

The bracket is exactly as described. It fits perfectly with my q7 tv. It amazes me how slim the design is and makes the mounting as close to the wall as possible. The directions are easy to follow, and did not even use any words to guide, similar to ikea directions. Using just the pictures, they made it look easy to install. . Ok, now the problem: the mounting kit only comes with 6 screws, 6 washers, 6 drywall anchors, but the bracket has 10 holes. When mounting to drywall, you want as many contact points as you can have. I would have preferred 10 hardware sets to match the 10 mounting holes on the wall bracket. . My other problem: the drywall anchors are too tight for the screws. For those unfamiliar with putting anchors in drywall, you do not want a super-tight fit with your screws. When you go to screw the screws in, the anchors(if too tight) will spin. When the anchors spin, they do not stop spinning and rip up the drywall. This is what happened to me. All 6 of the anchors spun, when i tried to tighten the screws. I had to remove the screws and anchors, and will use toggle bolts instead, as this is my only option, now that i have 6 large holes in my wall where the mounting bracket needs to go. I thought about using some epoxy overnight to help secure the anchors, but its just messy and toggle bolts support more weight anyways. . I would recommend that wali use different mounting hardware. Either get larger anchors, or smaller screws. You need to ensure that the screws can be inserted enough into the anchors, so that the anchors will not spin, when screwed into the wall. I have worked as a contractor for alarm and video systems for 14 years, so i know quite a bit about items mounted on drywall and the proper hardware to use. So wali, if you do respond to this, do not ask me the same bonehead questions, that you would ask a novice. The holes in the wall for the anchors were not oversize. In fact, the anchors were squeezed into a very small pilot hole. . Hopefully, they look to change the hardware, because a novice installer would probably destroy their wall, trying to mount the bracket, or just return it.

E. Guest, Montana

The arms do not rotate freely. You need a lot of force to move the arms. A pair of pliers was needed to move the small piece the holds the tv and it bent while moving it. We suspect that if a tv was mounted on it you could break it while trying to swivel it. You can't adjust the tension because the hinge points are pressed. We bought this in february and couldn't use it until our remodeling project was complete. Now we can't return it. Don't purchase this if you plan on moving the arm after you install this.

G. Claudia, Rutland says

Good quality, all parts were there, really like how you don't have to hold the tv while trying to attach it to the back (has a nice "hook" to hold tv while you attach it with screws). Obvious the company is trying hard. That said, two engineering problems: 1 - screws were too long for my tv so tv holder will forever be loose (minor). 2 - the item can not be used per the instructions because it is impossible to put the lag bolt into the wall without taking the thing apart first - because the bolt at the bottom of the first swivel gets in the way of the lag bolt. Should be easy to fix by making that piece of metal 1/4 inch longer (major pain. Just when you think all is going well). Other than that - love it, works great. Hope they can fix those two flaws!

K. Nancy, Michigan

Missing parts: washers. The machine screw heads are too small and will pull through the tv mounting plate. . I had to use washers i was fortunate enough to have on hand. . Assembly: frustrating. There are annoying interference areas where you have to needlessly remove the main pivot bolt just to access the hole for screwing the mount to the wall. . Overall i was able to make it work.

. Candy, Nord-Pas-de-Calais says

Overall the mount was good, it was a little time consuming with putting it together, there are definitely other mounts that are easier to build. The only problem i had, which is very veryyy annoying, is they include 8 m4 bolt washers to build the arm extensions. But if your tv uses m4 bolt size to mount the plate to the tv, the holes are to big for the screws and you need an extra 4 washers. There should be a total of 12 m4 size washers for that reason specifically. If your tv only uses small bolt size (m4) to mount the plate, be prepared to go to a hard ware store to buy some washers, but for the 15$ i spent it is a decent mount. . But they should realize the holes in the extension arms are to big for the (m4) bolt and should include 4 extra washers

. Sarah, Richmond upon Thames

Two issues with this mount. . 1) can t adjust tilt while monitor is hanging because there is no space to tighten or loosen the bolt controlling tilt unless you separate monitor with the mounting plate from the wall mount, which is held in place by two screws. So you have to guess desires tilt prior to hanging on the wall mount and tighten the screw. . 2) horizontal leveling is too loose, it can get easily messed up by the slightest bump or touch. . Bottom line if you need monitor hanging on the cheap it can be done for few dollars



Leave a Reply

You must be logged in to post a comment.


Back to Top

Related Products

  • Read Review
    Mounting Dream Md2413 Mx Articulating 400x400mm (Av Furniture)

    Mounting Dream Md2413 Mx Articulating 400x400mm (Av Furniture) 328

    Add to Basket Mounting Dream Md2413 Mx Articulating 400x400mm (Av Furniture), Tv Wall Mount Bracket 26-55 Inch Led, Lcd, Oled Flat Screen Tv Full Motion Swivel Articulating Arm, Up To Vesa 400x400mm 60 Lbs Fits Most Of 26-55" Tvs This Mount Fits Most Of 26-55" Tvs Sold Today. It Fits Tvs Mounting Holes As Close As 4"x4" Or As Wide As 16"x16" (in Tv Terms - Vesa 100x100mm To 400x400mm). -Mounting Dream Md2413-mx Tv Wall Mount Bracket 26-55 Inch Led, Lcd, Oled Flat Screen Tv Full Motion Swivel Articulating Arm, Up To Vesa 400x400mm 60 Lbs Tilting
    1. Addition: Viewing Becomes More Comfortable: Tilts Tv Up 5 And Down 15 To Reduce Glare, Swivels Tv Left Or Right According To Your Seats Position. Pull Out To 19" And Retract Back To 2. 9", Making Your Tv Alive To Move.
    2. Addition: Easy Installation With Decent Instruction And All Included Hardware In Pre-labeled Bags. +/-5 Post-installation Adjustment Allows Perfect Tv Leveling. Comes With Bubble Level And Velcro Ties For Cable Management.
    3. Like the mount, very sturdy. We were mounting a 42 in. The instructions were alright, but you do need more tools , which meant more trips out to my husbands workshop. We were mounting on studs to replace another mount so didn't have to fool with that finicky stud finder. I took us about an hour and ... go to https://puqus.com/mounting-dream-md2413-mx-articulating-400x400mm-3280kxtz3be/#mounting-dream-md2413-mx-articulating-400x400mm
    Best Price Mounting Dream Md2413 Mx Articulating 400x400mm (Av Furniture) Md2413 Mx
  • Get Discount
    Security Adjustable Compatible Online Enterprises Metal Body (2mi o)

    Security Adjustable Compatible Online Enterprises Metal Body (2mi o) 1510

    Free Shipping Security Adjustable Compatible Online Enterprises Metal Body (2mi o), Security Wall Mount- Adjustable Indoor/outdoor Mount Arlo, Arlo Pro Other Compatible Models 4 Pcs Metal-body/shaft Tired Of Paying Ridiculously High Oem (original Equipment Manufacturer) Prices For Simple Camera Mounts? These Outdoor Wall Or Ceiling Mounts For Arlo Smart Home Security Cameras Are -Security Wall Mount- Adjustable Indoor/outdoor Mount Arlo, Arlo Pro Other Compatible Models Online-enterprises 4 Pcs Metal-body/shaft Black
    1. Plus: Smart Shoppers Know They Can Buy A 2, 3 Or 4 Pack For The Price Of A Single Oem Mount Without Sacrificing On Quality.
    2. Plus: Metal Mounts Are Made Of High-quality Rust-proof Aluminum. Plastic Mounts Have A Plastic Body, But Metal Core And Rust Plated Steel Shaft Inside. Sturdy, Tough, And Fully Adjustable. These Security Camera Mounts Will Give You An Oem Experience Without Sticker Shock.
    3. As mentioned previously, product arrived promptly and packaged securely. The product seemed to be suitable for the arlo wireless cameras with an adjustable end to allow pointing the cameras in any direction required. I was a little disappointed, however, with the mounting screws that came with it, a... go to https://puqus.com/security-adjustable-compatible-online-enterprises-metal-body-151071dpx36z/#security-adjustable-compatible-online-enterprises-metal-body
    Reasonable Security Adjustable Compatible Online Enterprises Metal Body (Wireless Accessory) Sc 5885
  • Bestsellers
    Echogear Tilting Mount Profile Design (fba eglt1 bk)

    Echogear Tilting Mount Profile Design (fba eglt1 bk) 963

    Purchase Now Echogear Tilting Mount Profile Design (fba eglt1 bk), Tilting tv wall mount low profile design 32-70 inch tvs - eliminates screen glare 15 degrees smooth tilt - easy install hardware included - glare got you down? it won't for long this large tilting tv mount, capable of up to 15-degrees of fingertip tilt technology. safety tested and ul certified to hold 32" - 70" led, -echogear tilting tv wall mount low profile design 32-70 inch tvs - eliminates screen glare 15 degrees smooth tilt - easy install hardware included - eglt1-bk
    • Add-on: The Low-profile Design Securely Holds Your Tv Only 2. 5" From The Wall, While Still Giving You Easy Access To Cables.
    • Love it love it but but it is very tight in the back once you mounted up in the wall, it will be a paint to get behind for wiring access, . You max pulling out is about 2" not much room for a fat hands! . You might want to opt for this one at twice the price. Https://www. Online store. Com/gp/produc... go to https://puqus.com/echogear-tilting-mount-profile-design-9630vmh7pqm/#echogear-tilting-mount-profile-design
    • Add-on: Diy In No Time. Our Easy To Follow Instructions And Simple 3-step Install Process Makes Mounting Your Tv On 16" Or 24" Wood Studs A Breeze.
    Cut-Price Echogear Tilting Mount Profile Design (Av Furniture) Fba Eglt1 Bk
  • See Reviews
    Loctek Extension Bracket Patterns Articulating (fba r2)

    Loctek Extension Bracket Patterns Articulating (fba r2) 2049

    On Sale Loctek Extension Bracket Patterns Articulating (fba r2), 18.8 long extension curved tv wall mount bracket 32-70 inch curved flat panel tvs vesa patterns up to 600 x 400mm/articulating arm swivel tilt max. fits 16 inch wall this ul certified curved full motion tv mount offers an attractive way to display tv while providing most flexible viewing. the arm can easily be adjusted, allowing you to enjoy in -loctek 18.8 long extension curved tv wall mount bracket 32-70 inch curved flat panel tvs vesa patterns up to 600 x 400mm/articulating arm swivel tilt max. fits 16 inch wall stud
    • Add-on: Weight Capacity:99lbs, Ul Certificate With 4 Times(396lbs) Loading Capacity Test.
    • Add-on: Meet Your Different Viewing Angles. Extend, Tilts Tv Up -2 And Down 10 Degrees And Swivel Your Tv Between 3. 3" And 19 " From The Wall, Which Helps To Clean And Collect The Cables.
    • We ordered this after looking at reviews for a 65 inch samsung curved tv. We had to put a steel plate so that we could hit the studs in the wall in the back. The mount is very nice and for the price does exactly what we want it to. The supplier packed it very well. Would definitely recommend it to s... go to https://puqus.com/loctek-extension-bracket-patterns-articulating-20490wdsy058/#loctek-extension-bracket-patterns-articulating
    Purchase Loctek Extension Bracket Patterns Articulating (Av Furniture) R2

Product Image Gallery

Top-wali-articulating-monitor-extension-200x200mm-21841nbtemwc-Content