Zooz Z Wave Sensor Temperature Humidity (zse40) 2822

Review for zwave plus sensor ver motion light

Price was $32.95. Purchased this unit with a samsung smartthings hub, 2nd generation hub and a 6 pack of cree bulbs to start out with. I am using the sensor in my basement to monitor humidity, temp and motion. Works great in the smartthings hub, once you go and get the custom device handler for it at github (search the smartthings forums). I am currently using this to fire alerts for high humidity and low temp - will trigger a heater in the winter and a dehumidifier in the summer via a zwave outlet. I had grabbed a few of the samsung motion detectors and wish i had found this first! . . The motion sensor is 'sensitive' enough, aimed properly it does not trigger for my pets but does for people. Temp sensor seems within 0. 5-1. 5deg f and the humidity is spot on. . Really well done device!

-. Susan

Z-wave plus 4-in-1 sensor ver. 2.0 motion / light / temperature / note: this sensor is supported by open z-wave systems only. it will not work wink or z-wave alarm panels. please contact seller if you’re not sure your hub is compatible. specifications:model -zooz z-wave plus 4-in-1 sensor zse40 ver. 2.0 motion / light / temperature / humidity

  • Characteristic: New Improved Version: The Included Cr123a Battery Makes The Sensor Lasts Much Longer Than The Previous Version. Updated Motion Detection Allows You To Get Even Quicker Activity Reports.
  • Characteristic: Customize It: Choose From 7 Levels Of Motion Sensitivity, Adjust The Motion Re-trigger Interval, And Pick From 4 Different Led Indicator Modes (your Hub Needs To Support Advanced Parameter Input).

Reasonable Zooz Z Wave Sensor Temperature Humidity (Surveilance Systems)

Buy Now


Foreword

Most negative reviews for this product are for the previous iteration, version 1. 0, of this motion sensor. When i originally received the zooz 4-in-1 version 1. 0, i experienced all of the same problems other customers experienced; however, upon contacting the seller, they acknowledged the issue and quickly shipped me the updated version 2. 0. The new iteration (2. 0) of the sensor has an immediate motion response that's comparable to the ecolink z-wave motion sensor, and it has a vastly extended battery life. After a month of daily use (it's in a main stairway), the device is still reporting 100% battery life. The other sensors (light, temperature, and humidity) are also accurate, although temperature reports in celsius and it seems immune to attempts to change. Otherwise, i'm perfectly satisfied with version 2. 0 of this device. You'll know you have version 2. 0 because it's stamped on the label on the back of the device. If not, ask for a replacement from the the smartest house. The Best zwave plus sensor ver motion light ( Nov 2019 ) | Zooz-Surveilance Systems Review Characteristic ZOOZ Z-Wave Plus 4-in-1 Sensor ZSE40 VER. 2.0 (motion / light / temperature / humidity) 4 smart sensors in 1: this compact device detects and reports motion, temperature, humidity, and light level to your smart home app. compatible z-wave hub required, sold separately.. New improved version: the included cr123a battery makes the sensor lasts much longer than the previous version. updated motion detection allows you to get even quicker activity reports.. Customize it: choose from 7 levels of motion sensitivity, adjust the motion re-trigger interval, and pick from 4 different led indicator modes (your hub needs to support advanced parameter input).. Security first: this sensor is equipped with bank-grade aes signal encryption. it's z-wave plus certified to ensure it complies with the highest industry standards.. Will it work with my hub? this sensor is not supported by wink, vivint, adt pulse, qolsys, or other z-wave alarm panels. it will work great with open systems like almond (securify), homeseer, home assistant, hubitat, smartthings hub with custom device handler (contact seller for instructions), veraedge, veralite (running under ui7), and veraplus. .

Zooz Z-wave Plus 4-in-1 Sensor Zse40 Ver. 2.0 Motion / Light / Temperature / Humidity Review (zse40)

My is working with smartthings hub and uses ge z-wave lamp switch as a repeater. Works very well. The "tamper" indicator is great for making sure you have connectivity between the sensor and the smartthings hub. -S. Gloria

Zooz Z Wave Sensor Temperature Humidity

  • Order: Electronics
  • Brand: ZOOZ
  • EAN: 0853478006407
  • Product Dimensions:
    Weight:0.2 pounds
  • Manufacturer: ZOOZ
  • Warranty-Part: Amazon Return Policy:You May Return Any New Electronic Device Purchased From Amazon That Is "dead On Arrival," Arrives In Damaged Condition, Or Is Still In Unopened Boxes, For A Full Refund Within 30 Days Of Purchase. Amazon Reserves The Right To Test "dead On Arrival" Returns And Impose A Customer Fee Equal To 15 Percent Of The Product Sales Price If The Customer Misrepresents The Condition Of The Product. Any Returned Electronic Device That Is Damaged Through Customer Misuse, Is Missing Parts, Or Is In Unsellable Condition Due To Customer Tampering Will Result In The Customer Being Charged A Higher Restocking Fee Based On The Condition Of The Product.
  • MPN: ZSE40
  • Quantity: 1
  • Part/Serial Number: ZSE40
  • Sub-Type: Photography
  • Category: SURVEILANCE SYSTEMS
  • UPC: 853478006407

z-wave plus 4-in-1 sensor ver. 2.0 motion / light / temperature / Photography, Note: this sensor is supported by open z-wave systems only. it will not work with wink or z-wave alarm panels. please contact seller if you're not sure your hub is compatible. specifications:model number: zse40 ver. 2. 0z-wave signal frequency: 908. 42 mhzpower: 1 cr123a battery (included)z-wave range: up to 100 feet line of sight operating temperature: 5-104 finstallation and use: indoor onlydimensions: 2. 25" x 2. 25" x 1" will it work with alexa? online store echo is not a z-wave controller so you will need a compatible z-wave hub to get readings from this sensor from alexa. alexa-compatible z-wave hubs include: fibaro home center litesmartthingsveraplus Zooz Z Wave Sensor Temperature Humidity (-Zooz).

Zooz Z Wave Sensor Temperature Humidity Photography

PROS
  • Not detected automatically by the samsung hub, it required custom driver installation. It works fine but when close too the window (false alarms), when i left on vacation one of them kept saying "motion detected" the entire time, started working again when we came back. Meanwhile the other 4 capabilities of this sensor worked fine.
  • I bought the 4 in 1 sensor to use alongside a smart switch to turn a bathroom exhaust fan on and off based on humidity levels. Eventually, i'd like to wire another switch to allow the use of the motion sensor for the light as well. . After spending an hour or so trying to get this to work properly, what i didn't realize is that the directions are maybe a little outdated when it comes to pairing with the smartthings hub, and getting all of the sensors to report properly. . The quickest, easiest way is to use one of a few different custom device handlers out there, then create it in the smartthings ide. After you've paired your sensor, you'll need to go into the ide and set the device to use the custom device handler. After that, it'll start reporting everything. When i originally paired, it would only report the temperature and motion. . The only other thing is, it seems to be kind of slow on reporting, but it could also be the custom device handler that is having the issue. I can't be sure. But for my application it is working well enough that i'm not too worried about it. . But overall, the humidity sensor on this seems to work well. I checked the trigger history this morning and it triggered my fan switch when the humidity in the room was high and turned it off after it dropped to a certain level.
CONS
  • I was looking for a lux/light sensor that i could use with smartthings, and this was one of few i could find (the aeon being another, but i've had bad luck with their round mutlisesnsor before and wanted to try something different, even though they have a newer one now too). Doubling as a motion sensor is a plus because i was planning to turn on lights with motion if it was dark enough to need them. . First, this device isn't natively supported by smartthings, but you can make it work with a custom device handler you can install through the developers web interface in smartthings. (not for the faint of heart, but also not that hard even if you aren't a developer but can follow instructions. Says me who is a developer, but i still think you can get it if you're not. ) this is ultimately not a problem for me. . Second, this device works well as a lux sensor (and temperature and humidity). I'm not sure how often it updates, so if you're hoping to have it respond immediately to lights turning on in a room, you might not have much luck, but if you're trying to get a general idea of how light it is, it should work-i basically wanted mine to help me get an idea of whether enough sunlight was getting into the room or i needed to turn on lights. I ended up deciding not to use it for this purpose in favor of using smartthings modes instead, which i have changing automatically based on time and sunrise/sunset since i found that to work better (especially now that i can use online store echo to change them with my voice), but i'm sure you could make this work if you want. It seems to report light in percent instead of lux. It seems percentages below about 15% are where i would want lights on, but ymmv. . My biggest problem with this device is as a motion sensor: there is a significant delay between motion and this device reporting motion to the hub. Usually this is just a few seconds, which is annoying but not particularly problematic in my location. Sometimes it's 10 or more seconds, which can be a bigger problem. It might be the device handler i'm using (they recommend two, one by robertvandervoort and the other by erocm123; i'm using the former but can't imagine this would matter unless there is a bug in the first). I've done a z-wave network repair, which appears to be their recommendation for when this happens, but the problem persists, and all my devices are pretty close to my hub anyway. I read about this problem in several other reviews but decided i'd give it a try anyway, hoping that maybe it wouldn't happen to me. I was wrong. . If you don't care about quick response for motion (or are using for one of its other sensing capabilities), this device may work well for you. If you do care about motion, i wouldn't suggest this device. The motion detector that is quickly becoming my favorite is the second-generation iris motion detector (the zigbee ha 1. 2 models, not the first-generation that only worked with the iris hub). They respond very quickly to both motion starting and motion stopping and are much smaller (though not as easily mountable as the zooz or many other motion sensors), with the downside that they are not powered by a standard-size battery.
  • After reading the reviews i had reasonably high hopes that these would work well with the smartthings gen 2 hub, but it just wasn't so. Installed the recommended device handlers and just couldn't get all the sensors features to work. I even tried a few additional device handlers with no luck. The most i was able to get working was motion and the light meter. No humidity or temperature readings.
  • I have some information that i believe will explain why some people, if not all, are having issues with battery life from the zse40 4-in-1 sensor. . First, let s talk about what battery life means. Is it the time until you see your controller displays 0% battery capacity (or something like that), or is it the length of time you actually got from a set of batteries before the sensor just stopped reporting anything back to the controller app? it turns out, they are two entirely different matters. . I ran a simple experiment where i substituted an inexpensive lab power supply for the batteries in the zse40, and then varied the voltage to the battery terminals while observing what my controller app (indigo 7. 0. 3 running on a mac) displayed as battery level. (your controller may call it a different name, but the idea is the same: an attempt to tell you, the user, how much juice is left in your batteries. ) the results of my measurement were quite surprising. . This comments section is not intended for any kind of technical discussion. If i got into electronic terms, most would not understand it and rightly ignore it. I must condense my findings into something simple. But one thing you need to know is how to gauge the health of an alkaline battery. You can do this by measuring its "voltage" using a simple meter. A fresh alkaline will have a battery voltage of between 1. 5 to 1. 6 volts. As the battery discharges, its voltage will slowly decrease. A half-discharged battery measures about 1. 25 volts. When the battery is fully discharged, its voltage will measure about 1. 0 volts (some might prefer 1. 1 volts). These numbers are approximations, but are reasonably accurate. . Next, you must understand how a controller app determines the state of the battery of the zse40. It is not the app that does the measurement. It is the zse40 itself. It reads the batteries voltage, computes something, and then spits back a value between 0 to 100 to the app that specifies the batteries health, as a percentage. This is the number that you all read. From my above description of an alkaline battery s state of health as measured by voltage, you would think that 100% would translate to a voltage of 1. 5 to 1. 6 volts, and that 0% would translate to a voltage of about 1. 0 to 1. 1 volts. You would think that, wouldn t you? . . Think again. For whatever reason, the hardware and/or firmware in the zse40 considers a battery voltage of 1. 3 volts to be at 0%. As in dead battery. I m here to tell all of you that an alkaline battery with 1. 3 volts across it is quite healthy, having about 60-80% of its capacity still remaining. Yet, the zooz zse40 translates any voltage of 1. 3 volts or less as 0% remaining capacity. The sensor tells you to throw away your batteries when they in fact they are still very healthy, and commenters respond with eats batteries! " you will notice that even though the controller app says your batteries are exhausted, the sensor still continues to work just fine. It only confirms that there is still a lot of gas left in their little tanks, despite what the gauge says! once you see "0% capacity remaining, " you have no idea if your batteries have 80% capacity remaining or 1% remaining. You're flying blind at this point. . A last point to be made is that the sensor ceases working when the battery voltage drops to 1. 1 volts per cell. This shutoff leaves a bit more battery energy on the table, so it is a bit wasteful, too. . This, folks, is why many of you observe short battery life. It is not the fault of the app, it is not a coding error in your app, it is the fault of the zse40 sensor for reporting this erroneous number to the app. The app writers can only report the information that the sensor gives it, even if it is wrong. And it is. . I give it two stars because while the fuel gauge is thoroughly messed up, the sensors themselves are decent. Zooz should either update the firmware (mine is 16. 09, btw) or should not be shipping a product so flawed. ++++++++++++++++++++++++. For those of you who want a bit more detail, here is how the sensor converts battery voltage (i ll call it vbatt) and capacity remaining (i ll call it cr, expressed in percent) as the zse40 passes it to your controller:. . Cr (vbatt - 1. 3) * 500 (in percent). Or conversely. Vbatt (. 002 * cr) + 1. 3 (in volts, for 1. 3v vbatt 1. 5v). . So 1. 50v or higher reads as 100%, 1. 46v reads as 80%, 1. 42v reads as 60%, 1. 38v reads as 40%, 1. 34v reads as 20%, and 1. 30v or less reads as 0%. If you understand anything about alkaline batteries, you know that these numbers are complete nonsense, as they paint just about any alkaline as far, far weaker than it really is.

zwave plus sensor ver motion light ZOOZ Z-Wave Plus 4-in-1 Sensor ZSE40 VER. 2.0 (motion / light / temperature / humidity) (Switch to Mobile/Desktop Version)

I had no problems connecting to my homeseer 3 zwave network, but the battery showed 0% for 3 days. I sent an email to tech support and received a response back the next day. They gave me a few suggestions to try so i deleted it from my network and started again. The sensor learned in immediately, but still no battery sensor reading. I figured out that if it is running on batteries, it must be awake to re-scan the device. I just opened the cover and it tripped the tamper switch to awake the device then i was able to re-scan. I tried the re-scan twice before the battery level displayed the correct value. My homeseer log now shows that it read the battery successfully. When i scanned in the device homeseer must have automatically set it for degrees f but the default sensitivity for motion is set to 4. Again the device must be awake before you can change the sensitivity parameters. Although the parameter page showed an error when i changed the sensitivity to a 1, the homeseer log shows that it was successful and the range is now at least 25 feet. I wish the manufacturer would post more specs on the range and pattern of the motion detector.

Zooz Z-wave Plus 4-in-1 Sensor Zse40 Ver. 2.0 Motion / Light / Temperature / Humidity
Click to see NoticeZooz Z Wave Sensor Temperature Humidity (zse40)"Takes some work to get all four sensors working on smart things but once setup works great. The temp and motion worked out of the box. If you have problems it is your controller not the device. You will have to learn how to add it. I recommend smartthings v2 i had vera for years lots of problems and my edge went stupid. I bought smartthings to try it had while house setup in under a hr."

(0) Question: Is this pet immune?


(1) Question: Is it compatible with tuxedo touch?


(2) Question: Will this work in a freezer to let us know if the temperature goes up?



Dome Home Automation Motion Detector Z-Wave - Light Sensor - Magnetic Mount, White DMMS1

Dome z-wave motion detector dome now officially works with wink! your home security system just got bumped up a notch. If anyone is moving along where they shouldn't be, you'll know about it. Lights will go on and sirens will blare-should you choose, or maybe just a notification to your smartphone will be enough, but you get the picture. With the dome home automation motion detector you can program your z-wave hub to light the way when you enter a room, automatically turn on only the lights you want to, and turn them off when you leave. Built-in ambient light sensors dim lights to their perfect brightness set it up to monitor your windows and doors, illuminate a hallway, or measure light levels so you're not wasting resources. It's like a camera, laser, and assistant in one, but cheaper and less intrusive. Use with most any z-wave hub including: wink, home seer, smartthings, vera, harmony and more. Three-year battery life and up to 150 foot range. Ambient light detection and advance configuration settings may not be available through all smart hubs. Visit dome's how-to page for more information

Dome Home Automation Motion Detector Z-Wave - Light Sensor - Magnetic Mount, White DMMS1Dome-Automation-Motion-Detector-Z-Wave

DOME HOME AUTOMATION MOTION DETECTOR Z-WAVE - LIGHT SENSOR - MAGNETIC MOUNT, WHITE DMMS1 Feature
Brand :    dome by elexa
Color :    White
  • Adjustable sensitivity - don't send your neighbors into a panic every time rover and spot enter a room
  • Perfect for home security systems - z-wave plus certified and compatible with z-wave hubs, to seamlessly integrate with wink, smartthings, home seer, nexia, and other hubs
  • Battery-powered to install almost anywhere - magnetic mount and battery operation (3-year battery life) for flexible installation in nearly any area of your home
  • 110-degree motion detection for alarm - detects movement with extra-wide 110-degree coverage and responds by sending an alert to your smart home alarm system
  • Senses motion and ambient light - senses current lighting conditions and helps create smart lighting scenes that optimize your personal safety and home security
Price :    $34.92
Model :    DMMS1
Quantity :    1
Order click here :    normally ships in 24 hours
Photography :    Best Surveilance Systems (dome by elexa product review) for Dome Home Automation Motion Detector Z-Wave - Light Sensor - Magnetic Mount, White DMMS1 available ( Nov 2019 )

Z-wave Plus Motion Detector, Easy to install PET Immunity, White PIRZWAVE2.5-ECO

From the leaders in z-wave plus technology, the ecolink motion detector allows you to improve the safety and security of your home and family easily and effectively. Built with premium components for better performance, these motion sensors provide instant and reliable performance as part of your security system. Ecolink is a leading developer of low power, highly reliable wireless solutions, including a wide range of intelligent wireless security, sensing and home automation devices. Dimensions: 3. 5 l x 2. 3 w x 1. 8 h.

Z-wave Plus Motion Detector, Easy to install PET Immunity, White PIRZWAVE2.5-ECOZ-wave-Detector-install-Immunity-PIRZWAVE2-5-ECO

Z-WAVE PLUS MOTION DETECTOR, EASY TO INSTALL PET IMMUNITY, WHITE PIRZWAVE2.5-ECO Reviews
Brand :    ecolink intelligent technology
Color :    White
Size :    3.5 x 1.8 x 2.3
Model :    PIRZWAVE2.5-ECO
Quantity :    1
Order click here :    normally ships in 24 hours
Photography :    Best Surveilance Systems (ecolink intelligent technology product review) for Z-wave Plus Motion Detector, Easy to install PET Immunity, White PIRZWAVE2.5-ECO available ( Nov 2019 )
Price :    $38.99 (was $43.29)
  • Overcomes potential interference of pets as large as 55 lbs, saving nuisance false alarms.
  • Five year battery life and discrete design keep it out of sight and out of mind when not on alert.
  • Easy installs with included flush mount and corner mount wall brackets and begins to learn as soon as batteries power it up.
  • Works with most brands of z-wave and z-wave plus home security hubs.
  • Premium components provides accurate and instant motion detection in both automation mode and security mode

Ecolink Intelligent Technology Z-Wave Easy Install, Battery Operated, Door/Window Sensor, White & Brown DWZWAVE2-ECO

From the leaders in wave technology, the eco link door/window sensor allows you to improve the safety and security of your home and family easily and effectively. Built with premium components, including rare earth magnets for better performance, these entry/window sensors provide instant and reliable performance as part of your security system. Dimensions: 3. 35 l x . 97 w x . 93 h.

Ecolink Intelligent Technology Z-Wave Easy Install, Battery Operated, Door/Window Sensor, White & Brown DWZWAVE2-ECOEcolink-Intelligent-Technology-Operated-DWZWAVE2-ECO

ECOLINK INTELLIGENT TECHNOLOGY Z-WAVE EASY INSTALL, BATTERY OPERATED, DOOR/WINDOW SENSOR, WHITE & BROWN DWZWAVE2-ECO Advantage
Brand :    ecolink intelligent technology
Color :    White & Brown
Weight :    1.00 pounds
  • Easy installation by simply pulling the battery tab to begin the learning process.
  • Works with most brands of z-wave home security hubs.
  • Features industry leading rare earth magnets that allow for up to a 5/8 inch gap , which makes it perfect for double hung or commercial windows.
  • Tamper sensing premium design outlasts the competition and boasts a battery life of up to 5 years.
  • Both white and brown plastic casing included to match any décor.
Price :    $26.99 (was $28.00)
Model :    DWZWAVE2-ECO
Quantity :    1
Order click here :    normally ships in 24 hours
Photography :    Best Surveilance Systems (Photography product review) for Ecolink Intelligent Technology Z-Wave Easy Install, Battery Operated, Door/Window Sensor, White & Brown DWZWAVE2-ECO available ( Nov 2019 )

Aeotec Multisensor 6 Battery, Z-Wave Plus 6-in-1 motion, temperature, humidity, light, UV, vibration sensor

Multisensor 6 is the foundation of a modern smart home. A 6 in 1 z-wave plus sensor, its perfectly small size hides the technology that powers real-time intelligence for your smart home. Designed and calibrated for precision, the accuracy of multisensor 6's sensors varies as little as 0. 2%. In real-time and with real accuracy. Multisensor 6 will measure motion, temperature, humidity, light lux, uv, and vibration. Only 1. 65 inches in size, can be installed in your home 4 different ways: on a shelf, in a corner, within a wall cavity, or on a wall as a beam sensor. And it can be powered 2 different ways: by batteries or via a usb cable and adapter. A part of aeotec gen5 range of z-wave products, multisensor 6 outperforms all that has come before it. It's built around the latest z-wave 500 series chip and firmware, providing a 50% greater wireless range and a 250% faster communication speed over previous z-wave products. It has aes 128 bit security encryption built right in. Specifications: motion sensor : 16 feet, and 120 field of view; humidity sensor : 20% to 95%, accuracy:+/- 5% at 77 f; temperature sensor : 14 f (-10 c) 140 f (60 c), accuracy: +/- 32. 9 f (0. 5 c); light sensor : 0 lux to 1000 lux; vibration sensor : acts as tamper switch, on or off; operation temperature (top): -4 f (-20 c) 140 f (40 c); storing temperature: -40 f (-40 c) 176 f (80 c); working humidity: 8% 80%; operational site: indoor and outdoor; power: dc 5v 500ma via usb cable or 2 x cr123a battery (1 cr123a battery included); weight: 2. 6 oz.

Aeotec Multisensor 6 Battery, Z-Wave Plus 6-in-1 motion, temperature, humidity, light, UV, vibration sensorAeotec-Multisensor-temperature-humidity-vibration

AEOTEC MULTISENSOR 6 BATTERY, Z-WAVE PLUS 6-IN-1 MOTION, TEMPERATURE, HUMIDITY, LIGHT, UV, VIBRATION SENSOR Advantages
Brand :    aeotec
Model :    ZW100-A
Quantity :    1
Order click here :    normally ships in 24 hours
  • Up to 2 year battery life with 2 batteries or power via usb. 1 x cr123a included in the box.
  • Z-wave plus certified. certification number: zc10-15070011
  • Super-small at 1. 65 inches. can be installed in corner, in-wall, on shelf or recessed in ceiling with recessor accessory.
  • Works with certified z-wave gateways and tested with fibaro, homeseer, indigo 7, openhab, smartthings, and vera.
  • 6-in-1 z-wave plus multisensor: motion, humidity, temperature, light lux, uv, vibration sensor.
Price :    $59.99
Photography :    Best Surveilance Systems (aeotec product review) for Aeotec Multisensor 6 Battery, Z-Wave Plus 6-in-1 motion, temperature, humidity, light, UV, vibration sensor available ( Nov 2019 )

Visonic MCT-340 E Wireless Door Window Temperature Sensor 2.4ghz ZigBee - Now Works Natively Samsung SmartThings Hub

10/10/17 update: great news the visonic mct-340 e wireless door window and temperature sensors are now natively supported by samsung smartthings for hassle-free connection to your smartthings hub. Connect to your smartthings hub simply by putting your sensor in discovery mode, searching for a new 'thing' on your smartthings app, and pairing with the visonic mct-340 e. Complete sensor installation by following the mounting instructions found on the box and you're ready to get started.

Visonic MCT-340 E Wireless Door Window Temperature Sensor 2.4ghz ZigBee - Now Works Natively Samsung SmartThings HubVisonic-MCT-340-Wireless-Window-Temperature

VISONIC MCT-340 E WIRELESS DOOR WINDOW TEMPERATURE SENSOR 2.4GHZ ZIGBEE - NOW WORKS NATIVELY SAMSUNG SMARTTHINGS HUB Featured
Brand :    visonic
Color :    white
Size :    1
Model :    MCT-340 E
Quantity :    1
Order click here :    normally ships in 24 hours
  • Monitor your windows and doors requires samsung smartthings hub and smartthings app
  • Operating temperature 0 c to 55 c dimensions 66x25x10mm
  • Very small, thin form factor able to blend into the decor of most installations easy installation using high-strength 3m mounting tape (included)
  • Thermometer feature reports temperature battery life expectancy: 3 years (for typical use)
  • Wide gap performance able to be installed in tough situations where magnet gap is over 1" virtually unnoticeable, with sleek design
Price :    $10.97 (was $18.91)
Photography :    Best Surveilance Systems (visonic product review) for Visonic MCT-340 E Wireless Door Window Temperature Sensor 2.4ghz ZigBee - Now Works Natively Samsung SmartThings Hub available ( Nov 2019 )

Samsung SmartThings Smart Home Hub

Started with hub v1 and now on v2. Everything is working great. I wish they has a better system for upgrading to the new hub besides doing everything all over again but i got it done and all is working. I do notice a faster response time to triggers and i like the idea of having more processes being controlled locally instead of in the cloud. The battery back up is cool just not really part of my system now. If the lights go out i wont need smartthings to turn them on for me (no power). Besides that with the back friday discount i could not find a reason not to upgrade.

Smartthings lets you easily control, monitor, and secure your home from anywhere in the world. The heart of your smart home, the samsung smartthings hub will connect all of your different smart locks, lights, outlets, thermostats, and more and let you control them from the free smartthings app. Receive notifications about what's happening in and around your home and use your smartphone to remotely control your home's security, energy usage, lighting, and more. Since smartthings is compatible with a wide variety of smart devices from different companies, once you have the smartthings hub and the free app for ios, android, or windows, you can add as many additional smartthings sensors or other popular z-wave, zigbee, or internet-connected products as you want to enhance your connected home. The samsung smartthings hub works in the us and canada. If the honeywell programmable thermostat was not detected, you may need to reset the device through a z-wave exclusion before it can successfully connect with the smartthings hub. To do so in the smartthings mobile app: 1. Tap the menu 2. Tap the hub 3. Tap z-wave utilities 4. Tap general device exclusion 5. When prompted: 1. Press the system button on the left side of the thermostat's display 2. Press and hold the blank center button until the display changes 3. The first set of numbers/arrows is the "function" section - scroll until you find "rf10" 4. The second set of numbers/arrows is the "setting" section - select 0 5. Press done in the lower left corner to save and exit after the app indicates that the device was successfully removed from smartthings, follow the first set of instructions above to connect the honeywell programmable thermostat. Note: please reference user guide and specification sheet below under 'technical specifications' for instructions on how to add devices and troubleshoot connectivity issues

Samsung SmartThings Smart Home HubSamsung-SmartThings-Smart-Home-Hub

Samsung Smartthings Smart Home Hub (f hub us 2) FAQ.

This is exactly what the alexa needs to extend her usefulness! no matter what device i go and purchase, this thing can talk to it, and by proxy, can be controlled by alexa! i used to use x10 devices throughout my house with schedules and macros. Now, with this smartthings hub, i can modernize my entire system with whatever smart devices i want to use. -Notice from R. Olga, Washington

Click to Show samsung smartthings smart home hub (f hub us 2) Details

When you need help with code to make devices work fully the way they should see rboyapps dot c m. Some devices you buy and install are seen as the wrong device type or the closes device type doesn't use all the sensors. Roy boy writes all sorts of scrips for all sorts of devices. We chat regularly about ongoing projects. Requests are filled on a regular. His stuff is so good i bought a lifetime membership even if i'll have everything i need in a week or 2. . Rboyapps has saved 3 devices for me so far. I would have trashed them without their help. Saved me 4 times the cost of membership! great deal and awesome personal service.

Samsung-smartthings-smart-home-hub-(f-hub-us-2) set picture

- D. DorothyHaven't had longer than a couple of days with it but has performed without a hitch with 3rd party zwave devices. I'm on the fence about giving a full 5 stars since i'm an unintentional samsung loyalist or addict as it would seem :p but i don't understand why there's apple watch support and no gear s2/s3 support? also keep reading terrible things about official samsung accessories (sensors and whatnot) for this thing. Samsung is an enigma to me, i wish i knew why they're so all over the place and inconsistent.

Samsung smartthings wins the smart home battle! there are so many different items by various manufacturers that work with smartthings. You still need to be careful because some items will only work with wink or another hub. But so far, i am very impressed with this hub. I use it for my clients for smart home monitoring. The app for smart phones also works well (i do wish they had one for ipad). And the website and support are so helpful. It is open source so there is a large community of developers and others with creative solutions. If you are new to smart home automation - start here with smartthings. Buy your hub first! then buy different components that are compatible.

I. Franklin, Redcar and Cleveland

SAMSUNG SMARTTHINGS SMART HOME HUB Benefits
Brand :    samsung smartthings
Color :    White
Size :    100
Weight :    0.50 pounds
  • Your smart home needs a brain, so get started with a smartthings hub. it connects wirelessly with a wide range of smart devices and makes them work together.
  • Requires an internet-connected wi-fi router with an available ethernet port, plus the free smartthings app for android (4. 1 or later) or iphone (ios 9. 0 or later)
  • Power: in-wall power adapter with about 10 hours of backup power from 4 aa batteries (included) communication. protocol: zigbee, z-wave, ip. range: 50-130 feet operating temperature: 41 to 95 f. compatible brands: honeywell, philips hue, kwikset
  • Add smart devices and put your home to work. choose from a wide range of compatible devices, including lights, speakers, locks, thermostats, sensors, and more.
  • Use the smartthings app or alexa to control your smart home. teach your house new tricks by telling it what to do when you're asleep, awake, away, and back home.
Price :    $69.90 (was $79.99)
Model :    STH-ETH-250
Quantity :    1
Order click here :    normally ships in 24 hours
Home Improvement :    Best Home Lighting Accessory (samsung smartthings product review) for Samsung SmartThings Smart Home Hub available ( Nov 2019 )

Aeotec Z-Stick Gen5, Z-Wave Plus USB to create gateway

Create your own z-wave gateway. With z-stick gen5 you ll be able to create your own z-wave hub using readily available, and sometimes free, home automation software. You ll benefit from a system that is locally hosted and cloud free, whose features, security and privacy you can personally control, and you ll be able to create your z-wave network at your own pace and within your own budget. Capable of controlling up to 232 different z-wave devices, including those that use the more advanced z-wave plus, and able to run on both full powered pcs and low powered pcs such as raspberry pi, z-stick gen5 works with with open source software such as domoticz , home assistant, openhab, and openhab2 and also works with commercially available software such as axial control, homeseer, indigo for macos. For enhanced network performance and reduced downtime, z-stick gen5 contains an inbuilt, rechargeable info-lithium battery.

Aeotec Z-Stick Gen5, Z-Wave Plus USB to create gatewayAeotec-Z-Stick-Z-Wave-create-gateway

AEOTEC Z-STICK GEN5, Z-WAVE PLUS USB TO CREATE GATEWAY Reviews
Brand :    aeon labs
Color :    White
Size :    Small
Weight :    0.4 pounds
  • Works with windows / mac / linux (including raspberry pi) to create a z-wave gateway for control of z-wave and z-wave plus devices.
  • Compatible with z-wave enabled, home automation software including home assistant, home seer, indigo 7, openhab, and openhab2. no software included.
  • Z-wave plus certified. certification number: zc10-15060006.
  • Tiny but powerful; 1. 1 x 0. 4 x 3. 5 inches in size and capable of controlling up to 232 different z-wave devices.
  • Can be used to upgrade the firmware of compatible z-wave plus devices that can accept ota / wirelss firmware upgrades.
Price :    $44.95
Model :    ZW090
Quantity :    1
Order click here :    normally ships in 24 hours
Home Improvement :    Best Home Lighting Accessory (aeon labs product review) for Aeotec Z-Stick Gen5, Z-Wave Plus USB to create gateway available ( Nov 2019 )

Monoprice Z-Wave Plus PIR Multi Sensor, Temperature - Humidity - Light

This passive infrared (pir) sensor detects motion and sends a z-wave trigger signal to the network. It also features temperature, humidity, and light sensors, which will automatically report changes in the conditions and will report the absolute values when queried. It has a tamper-proof switch, which will trigger a z-wave signal when the cover is removed. These trigger signals can be used to activate various other devices and perform preprogrammed tasks. This is a security enabled z-wave plus product and a security enabled z-wave gateway/controller must be used to fully utilize this sensor.

Monoprice Z-Wave Plus PIR Multi Sensor, Temperature - Humidity - LightMonoprice-Z-Wave-Multi-Sensor-Temperature

MONOPRICE Z-WAVE PLUS PIR MULTI SENSOR, TEMPERATURE - HUMIDITY - LIGHT Feature
Brand :    monoprice
Weight :    0.24 pounds
Model :    115902
Quantity :    1
Order click here :    normally ships in 1-2 business days
Wireless :    Best Consumer Electronics (monoprice product review) for Monoprice Z-Wave Plus PIR Multi Sensor, Temperature - Humidity - Light available ( Nov 2019 )
Price :    $27.99
  • Motion detection: this device uses a passive infrared sensor and sends a z-wave plus signal when motion is detected within its detection range. it can detect moving objects within line of sight at distances up to 32 feet, away with a field of view up to 120 .
  • Humidity detection: the sensor will automatically report the measured humidity level whenever it changes by a particular amount. by default, it reports every time the humidity level changes by 10%.
  • Light detection: the sensor will automatically report the measured light level whenever it changes by a particular amount. by default, it reports every time the light level changes by 10%.
  • Z-wave plus is a low power mesh networking communications technology that allows z-wave plus enabled devices to communicate with each other and to distribute z-wave plus messages throughout the network.
  • Temperature detection: the sensor will automatically report the measured temperature whenever it changes by a particular amount. by default, it reports every time the temperature changes by 1 c.

Aeotec Water Sensor, Z-Wave Flood & Leak Sensor

We all protect our homes against fires and thefts, but, each year, more homes are damaged by small water leaks than larger disasters. Aeotec s z-wave water sensor helps you monitor for water leaks and floods and prevent them. Super accurate, it s capable of measuring as little as 0. 03% of an inch of water. Powered by 2 x aaa batteries and with a typical battery life of over 1 year, water sensor is compatible with certified z-wave gateways including fibaro, homeseer, openhab, samsung smartthings, vera, and wink.

Aeotec Water Sensor, Z-Wave Flood & Leak SensorAeotec-Water-Sensor-Z-Wave-Flood

AEOTEC WATER SENSOR, Z-WAVE FLOOD & LEAK SENSOR Feature
Brand :    aeon labs
Color :    White
Size :    Small
Weight :    0.13 pounds
Model :    DSB45
Quantity :    1
Order click here :    normally ships in 24 hours
  • Aaa battery-powered and wireless with 1 year battery life
  • Monitor and protect against leaks and floods in real-time. can also detect the absence of water when used with tanks
  • Z-wave certified. certification number: zc08-14030008
  • Super accurate; can detect as little as 0. 03% of an inch of water
  • Compatible with certified z-wave gateways including samsung smartthings, mirrors vera, open z-wave, in control, and homeseer
Price :    $25.00 (was $34.75)
Home Improvement :    Best Home Lighting Accessory (aeon labs product review) for Aeotec Water Sensor, Z-Wave Flood & Leak Sensor available ( Nov 2019 )

Aeotec Multisensor 6, Z-Wave Plus 6-in1 motion, temperature, humidity, light, UV, vibration sensor

Multisensor 6 is the foundation of a modern smart home. Its perfectly small exterior hosts the technology for real-time intelligence. Designed and calibrated to be as accurate as it can be, multisensor 6 s accuracy varies as little as 0. 2%. The device measures ultraviolet light and can protect your family's health and your furniture from bleaching. With the newly added vibration sensor, multisensor 6 makes your environment secure like never before. Multisensor 6 is a part of aeotec gen5 range of z-wave products. That means that it outperforms all that has come before it. It s built around the latest z-wave 500 series chip and firmware, providing a 50% greater wireless range and a 250% faster communication speed over previous z-wave products. It has aes 128 bit security encryption built right in. You need a z-wave gateway which operates with the 500 series chip products to take full advantage of the device. Please consult the manufacturer of your z-wave hub to make sure it supports all multisensor 6 features. Specifications: motion sensor : 16 feet, and 120 field of view; humidity sensor : 20% to 95%, accuracy:+/- 5% at 77 f; temperature sensor : 14 f (-10 c) 140 f (60 c), accuracy: +/- 32. 9 f (0. 5 c); light sensor : 0 lux to 1000 lux; vibration sensor : acts as tamper switch, on or off; operation temperature (top): -4 f (-20 c) 140 f (40 c); storing temperature: -40 f (-40 c) 176 f (80 c); working humidity: 8% 80%; operational site: indoor and outdoor; power: dc 5v 500ma or 2 x cr123a battery; weight: 2. 6 oz

Aeotec Multisensor 6, Z-Wave Plus 6-in1 motion, temperature, humidity, light, UV, vibration sensorAeotec-Multisensor-temperature-humidity-vibration

AEOTEC MULTISENSOR 6, Z-WAVE PLUS 6-IN1 MOTION, TEMPERATURE, HUMIDITY, LIGHT, UV, VIBRATION SENSOR Benefit
Brand :    aeon labs
Color :    White
Size :    Small
Weight :    0.13 pounds
  • 2 year battery life
  • Z-wave plus certified. certification number: zc10-15070011
  • Super-small at 1. 8 inches. can be installed in corner, in-wall, on shelf or in downlight.
  • Works with certified z-wave gateways and tested with fibaro, indigo 7, openhab, smartthings, vera.
  • 6-in-1 z-wave plus multisensor: motion, humidity, temperature, light lux, uv, vibration sensor.
Price :    $54.99 (was $57.89)
Model :    ZW100
Quantity :    1
Order click here :    normally ships in 24 hours
Home Improvement :    Best Home Lighting Accessory (aeon labs product review) for Aeotec Multisensor 6, Z-Wave Plus 6-in1 motion, temperature, humidity, light, UV, vibration sensor available ( Nov 2019 )

ZOOZ Z-Wave Plus Motion Sensor ZSE02

Wink and all alarm panels users : do not buy it. Regardless your seller promised you your controller does not support many of command classes which are required for z-wave plus devices. Please note that claiming in this case item as defective is a violation of online store return policy and may affect your account. Model number: zse02 z-wave signal frequency: 908. 42 mhz detection radius: 110 / 16-23 feet power: dc 5v/1a or 4 aaa (1. 2v) batteries power consumption: 15ma when idle / 38ma when active range: up to 100 feet line of sight operating temperature: 14 f to 122 f operating humidity: 80% installation and use: indoor only

ZOOZ Z-Wave Plus Motion Sensor ZSE02ZOOZ-Z-Wave-Motion-Sensor-ZSE02

ZOOZ Z-WAVE PLUS MOTION SENSOR ZSE02 Advantage
Brand :    zooz
Weight :    0.90 pounds
  • May be associated and grouped with other z-wave devices for advanced home automation
  • 20 feet motion detection and wireless notifications (when included to a z-wave gateway controller)
  • Modern design will compliment any interior. note! this product is not supported by z-wave alarm system such as adt pulse. not supported by wink.
  • Two alternative power sources: 4 aaa batteries (not included) or micro usb cable (dc 5v / 1a)
  • Z-wave plus certified product: zc10-16045043. improved 500 chip for faster and safer wireless communication
Price :    $23.95
Model :    ZSE02
Quantity :    1
Order click here :    normally ships in 24 hours
Photography :    Best Camera Other Accessories (zooz product review) for ZOOZ Z-Wave Plus Motion Sensor ZSE02 available ( Nov 2019 )

Z-wave Plus Rare Earth Magnets Door & Window Sensor, White & Brown DWZWAVE2.5-ECO

From the leaders in z-wave plus technology, the ecolink door/window sensor allows you to improve the safety and security of your home and family easily and effectively. Built with premium components, including rare earth magnets for better performance, these entry/window sensors provide instant and reliable performance as part of your security system. Ecolink is a leading developer of low power, highly reliable wireless solutions, including a wide range of intelligent wireless security, sensing and home automation devices. Dimensions: 3. 35 l x . 97 w x . 93 h.

Z-wave Plus Rare Earth Magnets Door & Window Sensor, White & Brown DWZWAVE2.5-ECOZ-wave-Magnets-Window-Sensor-DWZWAVE2-5-ECO

Z-WAVE PLUS RARE EARTH MAGNETS DOOR & WINDOW SENSOR, WHITE & BROWN DWZWAVE2.5-ECO Spotlight
Brand :    ecolink intelligent technology
Color :    White and Brown
Size :    3.35 x 0.93 x 0.97
Model :    DWZWAVE2.5-ECO
Quantity :    1
Order click here :    normally ships in 24 hours
  • 3 years battery life: tamper sensing premium design outlasts the competition and boasts a battery life of up to 3 years.
  • Simple to install: easy installation by simply pulling the battery tab to begin the learning process. it works with most brands of z-wave and z-wave plus home security hubs
  • Rare earth magnets: features industry leading rare earth magnets that allow for up to a 5/8 inch gap, which makes it perfect for double hung or commercial windows.
  • Ecolink: ecolink is a leading developer of low power, highly reliable wireless solutions, including a wide range of intelligent wireless security, sensing and home automation devices.
  • White & brown cases included: both white and brown plastic casing included to match any décor.
Price :    $37.25
Photography :    Best Surveilance Systems (ecolink intelligent technology product review) for Z-wave Plus Rare Earth Magnets Door & Window Sensor, White & Brown DWZWAVE2.5-ECO available ( Nov 2019 )

GE Z-Wave Plus Wireless Smart Lighting Control Smart Switch, On/Off, In-Wall, Includes White & Light Almond Paddles Zwave Repeater Range Extender, Hub Required, 14291, Works Alexa

Transform any home into a smart home with the ge z-wave plus in-wall 500s smart switch. You can create custom scenes and schedule timed events either when you're at home or when you're away. Install in-wall with either single or multi-switch applications and you're on your way.

GE Z-Wave Plus Wireless Smart Lighting Control Smart Switch, On/Off, In-Wall, Includes White & Light Almond Paddles Zwave Repeater Range Extender, Hub Required, 14291, Works AlexaGE-Wireless-Lighting-Repeater-14291

GE Z-WAVE PLUS WIRELESS SMART LIGHTING CONTROL SMART SWITCH, ON/OFF, IN-WALL, INCLUDES WHITE & LIGHT ALMOND PADDLES ZWAVE REPEATER RANGE EXTENDER, HUB REQUIRED, 14291, WORKS ALEXA Advantages
Brand :    ge
Color :    White
Weight :    0.8 pounds
  • Requires a z-wave certified gateway. compatible with the following z-wave certified hubs: smartthings, pulse, trane, wink, nexia, honeywell, homeseer, smart security, harmony, vera, connect and iris. works with alexa for voice control (hub required; alexa device and hub sold separately).
  • Wirelessly control on/off functions of overhead lighting with your mobile device or computer using any z-wave certified gateway.
  • Works with alexa for voice control (hub required, alexa device and hub sold separately).
  • Works well with all led, cfl, halogen, and incandescent bulbs and other devices. it must be connected to a supported hub in order to interact with the alexa.
  • Alexa compatible - requires an alexa supported hub for voice control with echo products (alexa device and hub sold separately). cannot connect directly with echo plus (only zigbee products can connect directly to echo plus).
Price :    $34.50
Model :    14291
Quantity :    1
Order click here :    normally ships in 24 hours
Home Improvement :    Best Home Lighting Accessory (ge product review) for GE Z-Wave Plus Wireless Smart Lighting Control Smart Switch, On/Off, In-Wall, Includes White & Light Almond Paddles Zwave Repeater Range Extender, Hub Required, 14291, Works Alexa available ( Nov 2019 )

zooz z-wave plus 4-in-1 sensor zse40 ver. 2.0 motion / light / temperature / humidity Price : 32, was : 0 as 2018-05-14
USUKDEFRESITJPCNCAGlobal
United States
Great Britain
German
France
Spain
Italy
Japan
China
Canada
World Wide
Zooz Z Wave Sensor Temperature Humidity (zse40) Reviewed by on puqus.com

Top zooz z wave sensor temperature humidity (zse40) Content

The F.A.Q. for zooz z-wave plus 4-in-1 sensor zse40 ver. 2.0 motion / light / temperature / humidity

I was a little worried when i purchased this product because of the two bad reviews. I figured the others just didn't set it up correctly. Well i'm glad i gave this sensor a shot. . 1. Open the package. 2. Look for new device on you hub, (mine is smartthings). 3. Press the z-wave button 2x with a paperclip. 4. Include found zwave motion sensor. . To get the most out of this device on samsung's smartthings api: (graph. Api. Smartthings. Com). 5. Copy one this device handler "device type-zooz-4-in-1-sensor-zse40 v1. 1" text to your clipboard (first link is temp is your primary use, second link if motions is your primary use. ). Github. Com/robertvandervoort/smartthings/blob/master/zooz-4-in-1-sensor-zse40/device type-zooz-4-in-1-sensor-zse40 v1. 2. Github. Com/robertvandervoort/smartthings/blob/master/zooz-4-in-1-sensor-zse40/device type-zooz-4-in-1-sensor-zse40 v1. 2 motion primary. 6. Create a new device handler and paste copied text into the code section. 7. 'create' , 'save' , 'publish'. 8. 'edit' the device type and change it to the device you just created and 'update' it. 9 mount it and enjoy!

A number of questions have been asked here.

Showing 20 Q&A on ZOOZ-Z-Wave-Sensor-temperature-humidity

(0) Question: Can this be ceiling mounted? what is the detection angle on this?


(1) Question: Why dows the battery is drained so quickly, i've been running four of these units and i've had to change the batteries twice in the last two months?


(2) Question: Can you turn off the different sensors i don't need, i need just the temperature?


(3) Question: What is the expected battery life on this product?


(4) Question: Anybody have any luck getting this version to work with a veraplus? vera can't!


(5) Question: How did you get it to connect to the smartthings hub? i have a version 2 hub, and i have tried everything but removing all devices and starting over.


(6) Question: Does this work with adt pulse?


(7) Question: Is this product compatable with iris by lows? i want to use this as a thermometer in my laundry furnace room in my garage.


(8) Question: Will this work with nexia?


(9) Question: Can this be used outside?


(10) Question: Does this also work as a z-wave range extender?


(11) Question: Can't seem to get the motion working on veralite. any thoughts? i have temp, light, humidity sensor but the motion is called generic io


(12) Question: Does this work with the almond 2015 or almond+ routers?


(13) Question: What is the maximum range this device can be from the hub and still properly work?


(14) Question: Will this see thru a clear shower curtain?


(15) Question: Can i use this worth the smart things hub to control the lights with motion?


(16) Question: Does this work with wink?



(note) Question: where/how to get Zooz (manufacturer's brand) accessories & similiar Zooz's products

Click to Show/Hide the Answer
Answer:

Click on the marked text to copy to Clipboard

Works well (and reliable) with my home assistant (raspberry + aeon 5gen stick) device. Now i'm buying my second unit of this sensor. . To be frank i'm not sure why such negative feedbacks. Perhaps their devices firmwares aren't up-to-date. I totally recommend this unit, at least the one being sold in online store since 2018.


Electronics 282271, Security & Surveillance 631425, Security Sensors 13114241Top Zooz Z Wave Sensor Temperature Humidity (zse40) FAQ Content

Best zooz z wave sensor temperature humidity (zse40) in review

This is a fantastic multi sensor with some great features. It is larger than some competing products, but not by much. Also, the size is probably constrained by the use of aaa batteries, but at least these batteries are cheap and easy to come by. The look of the device is definitely more modern than a lot of other motion sensors that are out there. Some of the great things about this sensor:. . - as mentioned, standard aaa batteries. Sensors that use cr123a batteries create an additional cost of expensive battery replacements. Not so with this sensor. - product packaging and documentation very well done. I know this is a small thing, but you can tell that zooz has put a lot of effort in this product. - accurate readings. Compared to other sensors side by side, this one seems to match what the others are showing. - led control. It is nice that you can disable the led as it can be a little strong in a dark room. - other settings: pir sensitivity and pir motion timeout settings are always nice to have. . Overall, this is a great sensor. Really the only thing left that has me wondering is battery life. I haven't had enough time to test, but it is still showing 100% so that is a good sign. I'll update the review if battery life disappoints.

O. Jennifer, North Lincolnshire

You might like to see Av600 Nano Powerline Ethernet Adapter Starter Kit, Powerline Speeds Up To 600mbps Using Advanced Home Plug Av Technology, Tl-pa4010 Kit Provides Users Stable, High-speed Data Transfer Rates Of Up To 600mbps On A Line Length Of Up To 300 Meters. Speed Of Up To 14700903-Tp-link Av600 Nano Powerline Ethernet Adapter Starter Kit, Powerline Speeds Up To 600mbps Tl-pa4010kit
  1. Details: Network Expansion: Homeplug Av Standard Compliant Ieee802. 3, Ieee802. 3u, With Easy Pair Feature To Add Additional Tp-link Powerline Adapters To The Network; Gigabit Speeds Through Your Electrical Outlets For Improved Coverage; Connect Multiple Adapters To Expand Your Wired Network Reliably.
  2. Details: Industry Leading Support: 2-year Warranty And Free 24/7 Technical Support; J. D. Power Ranked Tp-link "highest In Customer Satisfaction For Wireless Routers In 2017".
Economical Tp Link Powerline Ethernet Adapter Tl Pa4010kit (Networking Device) Tl Pa4010kit Tp Link Powerline Ethernet Adapter Tl Pa4010kit (Networking
Or you might like to consider Google Pixelbook Case, Pu Leather Folio Carring Cover 12.3 Google Pixelbook 12.3 Inch Hd Ips Touch 2in1 Feature: Specially Designed For 12. 3" Google Pixelbook (12. 3 Inch Hd Ips Touch) 2in1 Laptop(warning:not Support Tablet Model. ) This Protective Cover Has Two Rubber Strings On The -Google Pixelbook Case,mama Mouth Pu Leather Folio Carring Cover 12.3 Google Pixelbook 12.3 Inch Hd Ips Touch 2in1 Laptop,black
  1. Benefits: This Protective Cover Has Two Rubber Strings On The Left And Right Sides Below The Screen Pu Leather Frame. It Is Allows You To Adjust The Pixelbook To Multiple Angles Securely.
  2. Benefits: In Your Using And Carring Your Pixelbook, Prevent Your Pixelbook From Knocks, Dust, Damage, Scratches.
Most Wishlist Google Pixelbook Leather Carring Laptop (Carrying Case Or Bag) 10001759 1 Google Pixelbook Leather Carring Laptop (Mama

M. Alexia, New South Wales says

Picked this up when my smartthings motion sensor died. Pairing was a bit difficult at first. I had to reboot the smartthings hub and then it paired fine. So far seems to be ok, i have the sensitivity set as sensitive as it can go, and its not as sensitive as the smartthings brand motion sensor, but it does the job. Will update if anything changes.

. Sandra, Pennsylvania

Works great with smartthings, using the "robertvandervoort : zooz 4-in-1 sensor - rv 1. 2" device handler. Smaller than i expected, which is great. I assume the accuracy is fine, as the temperature matches exactly with the samsung smartsense multi sensor i placed it next to. This also includes an intrusion switch on the inside which detects if the case has been opened, and exposes it as an acceleration event, so in smartthings it actually shows 5 functions.

F. Aldana, Rotherham says

Good little sensor. Zooz provides some quality controllers on their website. It is exceptionally faster to trigger than other sensors i have used.

A. Clara, South Tyneside

Works perfectly with the aeon labs/aeotec z-stick gen 5 and home assistant. . From looking at the reviews, it seems most people are using this with smartthings, vera, homeseer and similar devices, but i don't see anyone using this with the z-stick along with a software solution like home assistant or openhab. I was able to be up and working in home assistant within about 10 minutes, with little trouble. For actual device inclusion i used open z-wave control panel, as my home assistant install relies on open z-wave to communicate, and the sensor showed up immediately after pressing the inclusion button twice. I did, however, have to press the button a few more times to wake it up and fully talk with my controller and pull down the available attributes. After that, it's been working flawlessly since. . Comes with 2 aaa batteries, energizer brand at that, which is nice. Mounting hardware was easy to understand how it was expected to work, however i didn't find the mounting to be as flexible as it could had been. I spent at least 5 minutes just trying to figure out how to best use the mount, but it wasn't that big of a deal. . I had never used a zooz product before, but i'm very happy with this one and will be looking at other zooz products to add to my system. They are cheaper than others out there, but the quality (at least based on this sensor) is solid. . 10/10, would recommend!

I. Imelda, Georgia says

I ve bought 3 of these and have them working with the samsung smart things hub. They are working well, the sensor values are consistent with other sensors i have in the house. . I like that you can optionally turn off the led that blinks when it detects motion, not all motion sensors let you do this. . This is not natively supported by smart things but the developer community has published a device handler that you can install in your setup to get this working.

. Lisa, Leicestershire

Update. I had the eneloop batteries in for a little over 2 month before replacing. They seem to hold up pretty well. . Works nicely with homeseer 3 on a windows machine. Reports quickly movement. I use it in the garage mostly to see the temperature and light level. The motion function seems to work just fine. We run thru a set of rechargeable batteries (eneloop) in about a month. This is our use and yours might be different. Since i use rechargible batteries i don't care too much. . It is a neat little device and i have to say i like it a lot better then the aeon multi sensor that i have and gives me constant trouble. I am planing on getting more of them to put in different places in the house.

. Isabel, Bexley says

Was able to get it working with the smartthings hub using a custom device. It's a little difficult to setup but once added i have had no issues. Temperature sensor is a bit slow to adjust and that's the only thing i use it for right now.

G. Edna, Massachusetts

So far so good with this sensor, works perfect.

B. Claudia, Croydon says

Works better than my aeotec multi (g5). Accurate, easy to setup with the 1. 2 device handler and uses aa. If there is one thing to change, it's the mount: it's huge and projects the sensor 3" (or more) out into the room.

Q. Hurst, Worcestershire

These little devices are great. Customer support is wonderful too. They report temperature, humidity, light level and motion. They synch in easily. Very happy with my purchase. I have one my garage/shop turning on lights when there is motion. This also gives me a good idea of the humidity and temperature before leaving in the morning. I also have them in different rooms in the house to monitor motion. I even have one in the bathroom that signals my home automation system to turn on the exhaust fan when the humidity from the shower goes above a level set in my home automation software.

Y. Olga, Hampshire says

Smartthings user and developer here. I got my first sensor from thesmartesthouse. Com, because i wanted to try a new multi-sensor that was a bit more affordable than some others. Being no stranger to having to write some code for a device that hasn't been officially adopted to smartthings, i figured it should be straightforward. The nice part about any z-wave certified device is they have to be made to their standards and communicate to the standards, thus writing code for them tends to be, predictable. You can find the fully optioned and functional version here (currently version 1. 1):. . . If you'd rather have temperature be the main tile, use this alternate one:. . . . Stuff i like:. * its size and form factor. It's quite unobtrusive to anyone used to typical home alarm motion sensors. * what comes in the box. All kinds of mounting brackets. You should be a no lack for the right stuff to get this sensor mounted where and how you want it. * the fact it uses 2 regular aaa batteries. This sounds like a simple thing, but. * the regular reporting of sensor data. Also sounds like a simple thing, but check forums for all the folks who just want updated values on a regular basis. If you're wanting to control a humidifier, or a window ac unit or anything that needs to be responsively managed, this is for you. * the notification led is actually usable. Yes, you have to be looking at it, but it does actually blip colors based on whats up. Maybe more a novelty but i can see it out of the corner of my eye and know it is doing something (without staring at an app). I do provide controls for that in my device type by the way. * it is actually pretty darn accurate! again, seems like a no brainer. I have a bunch of different multisensors at my house and the only one i trust implicitly is the $500 carrier mytouch thermostat on my wall! ha! and, actually, this sensor reads to within tenths of a degree temperature wise and about 1 percent relative humidity when placed next to that thermostat. The others no. Some are off by 4 degrees and 9 points of humidity! . * another accuracy win, the light sensor! ok, so it reads in percent. Like 0 is dark and 100 is fully lit. Whatever that means. It isn't in candles or lux like we would even (most of us) know what those numbers equated to, but really quickly you figure out what it is talking about. The also, thoughtfully, put the light sensor on the front face, unobstructed by the plastic housing, but as you can see (the top left dark spot) it doesn't look bad. I don't think so anyway. * other developerish stuff i wont bother commenting about. . What i dont like. * the action button as mentioned by another reviewer, needs to be pressed with something small. An unbent, naked paperclip (not the plastic ones) works fine, as does a thumbtack. I am rather leery about sticking sharp objects into electronics though. I would ask that future versions have a more accessible action button. * it isn't ip anything rated. That i know of. Maybe i could pull it all apart and coat it with something, but. I'd like to be able to use it outdoors. Under shelter of course. I suppose i could throw it out there and find out, but. I'll let the vendor comment on that. I did read the instructions and it says indoor use only. * working temperature range. This is definitely a "home sensor" meaning an in your comfy house sensor. I live in houston, and say i wanted to put it in my attic to drive a fan or something. I'm not sure based on the product lit and the hot houston summers whether it would survive. . That's it. I liked it enough i impulse bought another on online store! thanks online store, yes you know me well. I'd say it is a pretty great device especially since of my three cons, 2 of them are unknowns. Way to go guys! can't wait to see what you come up with next!

U. Teresa, Cheshire says

I ordered this sensor to work with samsung smartthings. Setup was easy and sensor is small enough to stick on a wall or any other area. As the description says, it reports humidity, light level, temperature, and battery level. I have been using this for about 2 months now, and battery has dropped to 40%. I hope battery will last at least six months. I will update my review if there is any issue.

E. Irene, Bremen

I have purchased a few of these. Work great with samsung smartthings hub. So easy to set up. Use to monitor or trigger macros. The battery monitor is so convenient. I will keep buying them for various homes.

K. Noguera, Cornwall says

I love this little thing! it's fairly small, only 2. 25" square, and very easy to place. The mount mounts flat along a wall, then pivots in two directions (left/right and up/down). So while you technically can't mount it directly on a corner, you can mount it very close to the corner then pivot it to achieve the same thing. Very accommodating! . . The little zooz has a lot to like! first off when you crank the sensitivity on it, it obliges and is very sensitive for motion! my default motion sensor is a monoprice motion sensor, and oftentimes i can walk right under them and they will fail to notice any motion. Not so with the zooz! i have two of them, and with sensitivity on highest detection from twenty feet away is easy and assured every time. Funny thing is that the motion sensor blinks red that it's seen motion *after* it's transmitted motion via zwave. That's neither here nor there, just an interesting twist. . The light sensor is a nice addition. It's clearly intended for indoor use, because very quickly it maxes out at 100% even on a cloudy day. But for indoor use this is fine; it easily registers the difference between ambient light and ambient light + desk lamp, so it's sensitive enough in the right range. . Temperature and humidity sensors have configurable sensitivity (i. E. How big of a change in temperature or humidity do you want to trigger a report to your hub). It doesn't automatically send temperature or humidity when motion is detected, but it does automatically send temperature and humidity events together. So if the humidity change triggers the unit to update, you'll also get a temperature report, and vice-versa. Obviously the more times it's transmitting the faster you're going to use up the battery, but that's a tradeoff they allow the user to make. . There's really only one downside that i have with the zse40, and that's that it insists on having a visual indicator for the temperature. The temperature ranges for the indicator are wide and non-adjustable so i don't find them useful; below 60f, 60-75f, 75-83f, 83-97f, and over 97f. It'd be much more useful if i could adjust them to personal taste. That wouldn't be so bad, except that you can't turn off the visual indicator entirely without also disabling motion indication! so at night you're going to see a colored flash of light down a dark hallway unless you disable all indications entirely. The zse40 definitely needs a 'show motion but not temperature' setting. (right now it has 'show none', 'slow blink temperature and fast blink motion', and 'fast blink both'. ). . Works great with both vera and openhab 1 & 2. With vera you add it as a generic sensor, then it comes up as four separate sensors (motion, temperature, humidity, light). Openhab has an example you can cut and paste to get it working quickly. . Blinking the temperature range is a minor nitpick, but otherwise i'm really happy with the performance of the zse40s and consider them a large step up from the monoprice 10796 motion detector. Definitely would purchase again!

R. Matherly, Darlington

I use these with my smartthings hub 2 and they work great. I normally screw these into the wall, but i'm this case i used the tape that it came with. The tape didn't hold so well, but that could've been due to a handful of reasons. All in all, the product is perfect and i'd recommend.

W. Megan, Tameside says

I chose this over others due to the size and 4-in-1 features. Paired up easily with smartthings as a motion and temp sensor, but if you look at the other reviews and add the custom device handler, you'll unlock all 4 features. . Works like a charm and from what i can tell the temp is pretty spot on as well. I like that it runs on 2 aaa batteries so i can put some rechargables in there instead of the coin and 123a batteries my other z-wave devices use. . Possibly my only complaint. The motion sensor is not pet friendly so my original idea of also using it for an alarm went out the window. I don't care if the cats trigger a light here and there but i don't want them sending false alarms all day and night. The sensitivity is adjustable from 1 - 7. I have it down to 6 and the cats still trigger it at times. At 7 sometimes i won't even trigger it so i can't go any lower. . Bottom line is if you don't have pets (or don't care about them triggering anything) and want an accurate 4 in 1 sensor that is nice and small, get this.

T. Marguerite, Rheinland-Pfalz

For the most part these are very useful motion sensors. I am using with a smartthings hub and the sensor is fairly easy to set-up (requires special device handler). I really like the humidity reading along with the mounting arm. I can only rate 4 stars as the battery life (2 aaa) is quite a bit less than the motion sensors that come with the smartthings hub. So far the batteries last about 2-3 months, as where the smartthings sensor is 6+ months. Overall i would still recommend these sensors because of the light and humidity measurements.

D. Kellie, Slough says

I like the illumination sensor better on this unit than my aeon labs multi-sensor 6, however i wish it had a usb port like the multi-sensor 6 since where i want it i could plug it in.

V. Veronica, Barnsley

This is a great little device. If you have smartthings, it won't be supported right out of the box, but it's a pretty straightforward process to use the ide and load a custom device controller to support it. The support team for the product (from the smartest home) is absolutely fantastic, and even if you don't have a clue what the smartthings ide is, they'll give you extremely clear instructions with screenshots of how to set it up. You only have to install the controller in smartthings once - you can add as many of these devices as you want afterwards, and smartthings will find them like any other supported device. . I had a weird issue at first where smartthings only saw the motion and temperature - but i contacted support and it was one setting that was incorrect - fixed in no time, and it works great. I assume that it works perfectly out of the box on the systems they state support it natively. . Great value, and overall great little device.

N. Nees, Oklahoma says

The sensor works great when you follow the link provided in other reviews. It takes a long time for the sensor to catch up when there is a large temperature change ( 20 ) in a short time. I use mine in a fridge where i need to monitor temperature and humidity and both of these values are very accurate. The humidity matches a sensor i have calibrated with a 70% calibration bag and the temperature matches multiple thermometers. . A note on the program, i cannot get the offsets to actually work, but since the sensor is so accurate i don't need it.



Top zwave plus sensor ver motion light Review

Disadvantage and Critical reviews

M. Peggy, Cheshire says

The sensor was easy to connect to a smartthings hub. The unit was versatile and easy to install with the bracket supplied. My only complaint is the delay between the sensor and the hub. I wanted to have the sensor trigger the front porch light, but there is sometimes as much as 5 to 8 seconds delay before the trigger. I have adjusted the sensitivity but that doesn't seem to help the delay.

D. Sherry, Corse

This sensor does what it claims: it senses light, temperature, humidity, and motion. The original 2xaaa alkaline batteries are still going after 6 months. The key to battery life is keeping the wakeup interval high (default is 14, 400 seconds) and not trusting the reported battery level - retiredee's review explains it very well. The motion detection is far from instant but usually picks up a moving person within a second or two. . This sensor supports only z-wave association group 1 (lifeline) - that can be a big limitation, as it prevents the sensor from directly controlling a light or other load. Other motion sensors, including the zooz zse09, have a separate group to directly control devices. You can identify these sensors because they have a setting to control how long the associated device(s) should stay on - the zse40 does not have this setting. Any decent controller can work around this limitation, at the cost of additional lag.

U. Pamela, Pennsylvania says

Neither the instructions with the sensor nor the veraedge documentation give any clue how to configure the two together. When they are paired, it shows just a generic i/o device with an off/on switch. After many false starts, i finally got all 4 sensors working with this procedure:. . 1) wake up the sensor by clicking the z-wave button once. In the vera online (browser) interface:. 2) devices within 10 seconds, turn the sensor switch on before the device goes back to sleep. 3) devices select the sensor advanced. 4) go to the params tab and make the following changes:. - device type: urn:schemas-micasaverde-com:device:motionsensor:1. - device file: d motionsensor1. Xml. - device json: d motionsensor1. Json. 5) then activate the sensor by clicking the z-wave button 3 times quickly. 6) leave the device by your vera for a few hours so it can fully configure. Then in the vera online (browser) interface:. 7) settings z-wave settings advanced tab reload engine go

P. Josephine, Derbyshire

The battery life is horrible. I have many zigbee motion sensors (with temperature sensor) and they have lasted over a year, and still at over 80% battery. This sensor i have had for just a few weeks, and i am already down to 40% battery on one and 50% on another. Zooz support claims they get over a year of battery life, and have stated to me several times, that their testing the sensor, and after getting great battery life. The most recent claim is after 17 weeks, they have used 70% of the battery life (still a far cry from 1 year battery life). . This is a gen 5 sensor, it should last 1 - 2 years easy. I have my set with everything tuned down to only marginally functional levels (only report temp every 5 degrees, humidity 10%, motion resets at 5 minutes, led indicator off, light reporting at 50lux) and my battery is not on par to last more than 5 weeks at best. . When using smartthings, you must use 3rd party software. If you set the motion sensitivity to 1 (most sensitive), the system takes about 5-10 seconds before a triggered action takes effect. I use these sensors to turn on / off lights, and for the turn on features, they are useless i am typically already out of the room before the lights finally turn on. The fault for this is two fold. 1st, the motion sensor requires a lot of activity to trip the motion sensor (and im a big guy at 6'5"), and 2nd, the lack of a native smartthings device handler means that you must rely on internet processing, since local processing is only supported on internally support devices. . So, for smartthings customers, don't get this if you are concerned about battery life, accuracy, or timely event trigger. For a security device, it may be okay, provided the subject does not pass through the room too fast for the sensor to trip motion.

L. Neva, Bradford says

I was a bit disappointed with this device. It took some serious messing around to get it to work at all. Its functions outside of motion detection are basically useless. Not to mention this thing eats batteries like no other zwave device i have ever used. It is pretty good at being a motion detector though, and its sensitivity configuration is much more variable than others i have used. But good luck making good use of the humidity sensor.

I. Watson, Lorraine

Very poor battery life and they continue to only show 1% in my hub even though i have installed new batteries. I have been working with the manufacture to attempt to fix this but even they dont know. . So far we have updated the handler, forced device refresh and removed and readded to the hub and still nothing. What a pain. Stay away from this product!

T. Guest, Auvergne says

I use these in bathrooms at the moment. They work great for automatically controlling the fan when the humidity level rises during showers but the motion sensor falls short on performance. We have the samsung smartthings motion sensor in an upstairs hallway and it will immediately sense you through a door of a bedroom across the house, it will even register your motion from down stairs. This zooz sensor barely recognizes you walking through the bathroom directly under it. If only the smartthings sensors had more sensors built in.

G. Olga, Indiana

Its a nice small motion detector, goes thru battery life really fast, better also buy rechargeable batteries to go with this unit. It detects the temperature, humidity accurately. If you have a dog or pet that weights 70 lbs i suggest you try another sensor, even after changing it to the lowest sensitivity setting 7 it still detects my dog.

Q. Clara, Haringey says

The motion sensor is "satisfactory", but if that's all you want it for, there are better, cheaper options. The temperature and humidity sensors are, as far as i can tell, accurate enough. The "luminosity" sensor is, for all but the narrowest of uses, useless. I've read some reviews that say it never comes close to 100%, even in "bright" situations. Mine is pretty much either 5% for "absolute pitch black" or "100%" for anything that is not "absolute pitch black". In other words, if you want to use this to determine when lights should be turned on, forget it. That, and the fact that you cannot poll it but instead have to wait for it to decide to send an update based on some roughly defined "minimum change" criteria makes this a relatively lackluster device.

. Campbell, Windsor and Maidenhead

I had some trouble getting this to work initially with my vera edge. I found that changing any of the settings after it was found by the system would usually cause it to get messed up and i would have to exclude then include it again. I have zopper and tasker setup on my note 10. 1 to show the temp reading on my home screen but for some reason it does not update frequently enough to do me any good. . The motion sensor does work well.

O. Rowe, Maryland says

Ok device, not great. It has a lot of sensors so that's nice. Are they all accurate? probably not. I know it goes through batteries. Well at least the battery monitor reports so. But don't trust it. I've had batteries in 2 of these report 1% for well over a month. I popped them out and checked them in a real tester. They showed +80%. So if they seem to be going through batteries, i would check them regularly. You can't trust the reporting of this device. I received the latest device handler from the supplier. No better. Oh, and when you first include this device, it has to setup for 24 hours. 1 of mine took a day to start reporting. Real frustrating device. 2 out of 4 seem to be working decent. Not good odds.

. Guest, Hartlepool

The sensor was not sensitive enough for my application. It took far too long to pick up motion to turn on the lights. Even with adjusting the sensitivity. I am using it on smartthings. If you use it on something local like homeseer or one of the home-grown applications, maybe it will work better. Couldn't test that theory.

K. Taylor, North Carolina says

Works well at being a light and temperature sensor but cant get the motion sensor to work with vera. Also it chews through batteries and feels pretty exspensive at $40. 00.

J. Hayward, Colorado

I bought 3 of these to use with a vera secure and with a smart things hub as a secondary controller. When i added it to the network, it added with no problems and seemed like all was working fine. It does sense motion really well from my testing of it, and the temperature and humidity sensors seemed to be pretty close to other thermometers in the house. The light sensor i have no accurate way of measuring, but the value reported did change noticeably when i changed the light's brightness. It does, however, have this light that blinks - i only noticed it with motion, but i'm not 100% sure if that's the only thing that would cause it to blink. If the room is illuminated, it doesn't seem to be much of a bother, but when dark it is quite noticeable. I couldn't figure out a way to disable this. Also, the mount i didn't really like. It could be mounted with screws or tape, but the way it attaches to the mount was simply to clip a piece on to the back of the sensor and lower onto the wall piece. It was easy to manipulate as desired, but i didn't like that the mount was a bit less secure than other mounting options i've used in the past. If you were to hit the sensor itself with an upward motion (not hard), then it would come off the mount. And finally, when i tried configuring it as a security device with the vera, it did not seem to have this capability. Seeing as this was my primary reason for purchasing, i opted to return this item.

B. Donna, Louisiana says

Tfrom zooz: the zse40 sensor reports light levels in percentage not lux values that's why smartthings automation and some other controllers who are limited to lux values will not allow for brightness level based automation. The zse40 is more of a security sensor for reliable monitoring, while our zse09 motion and light sensor is designed for lighting automation based on motion and brightness level. The 2-in-1 reports light level in lux and is perfect for your application. We recommend having the sensor replaced for the above model if your primary purpose is to automate lighting.

S. Rose, Tameside

It's a nice looking device. Only problem is how slow it is to respond. I have tried with multiple device handlers and it just takes to long to trigger bathroom lights. 3-4 seconds. . It also doesn't seem to pick up movement in dark very well. I will need to find another use for this.

X. Crawford, Oregon says

Update 1/27/2017. After many hours with the smartest house support agent agnes i have the unit installed and working. Almost. The motion sensor portion of the device does not show a tripped/clear indicator on the dashboard. Support attributed it to a recent firmware upgrade. At any rate, i can properly read the motion sensor in lua so i've decided to keep it. Thanks to the smartest house support. I've updated my rating to 3 stars though. Other controllers may install more easily but in vera there's room for improvement. . I updated my veralite to a veraplus and got the zooz sensor at the same time. I never successfully paired the zooz 4-in-1 to my veraplus. I managed to get 3 of the 4 sensors working, that is temp, lux and humidity but never could get the motion sensor to install properly. I followed several "alternate" paring option suggested on the getvera forums ie. Use the aeon labs 6 in 1 (or 4 in 1) selection. No joy. After half a dozen semi-parings and a dozen total fails, i returned the unit. I got an ecolink motion sensor which paired first time, no problem. There seems to be some people on the forums that have are successful in getting this to work, but i'm not one of them unfortunately.

N. Shayna, South Tyneside

Like all z-wave things this was very easy to pair. The only issue the motion sensor will not work the other 3 senors work just fine. The company tried to help, they were really fast responding to my emails. Everything they told me to do didn't work. I have a vera system not sure if that matters.

Y. Adrienne, Queensland says

Going through battery in a month. Vera said it was causing a lot of traffic on the network which was giving a lot of problems.

V. Cageen, Luton

Where do i start. Its a cute little sensor, comes with batteries-nice box. That seems to be all the positives on this unit. I have the veraplus and the unit paired up quickly using the "add generic zwave" . Veraplus added the temp / light /humidity as well as the sensor itself -which it allows you to name whatever you want. So here are my issues. . 1. Motion sensor would never trip or show any indication of movement-at all! ? ! (really a motion sensor that cant detect motion! ? ! ) i check the pdf directions and the default time between "senses" is default 3 minutes! ? ! so it setup to only send one movement every 3 minutes! ? ! so a person can walk thru and the sensor will never trip! ? ! even after changing the setting to 1 minute - the sensor still would not detect movement- at all! i even changed the sensitivity to max- still this function would not work! . . 2. The constant "push the paper clip into the bottom" to wake up the device to take changes ! ? ! and to even communicate for "on demand readings". I understand the device is battery operated and it need to sleep to conserve pwr- but motion should active it and send updates! it does not! ? ! you can change the "wake up interval" but it warns it will consume battery quickly-"please use default". . 3. The light sensor - this does seem to work but it very slow also to update - and it does not poll - so if you are wanting to run a "conditional scene " based on the amount light in the room at the time. The information is not available quickly enough to work! ? ! (please wait for several minutes to wake up). So the light sensor function is at best a basic "well its somewhat dark- some time ago-"i think". . 4. Humidity sensor is greatly off- as much as 20%! ? ! i placed 2 different humidity only (non zwave ) right next to it both of the sensor agreed -the zooz was different as much as 20%! ? ! . . 5. The temp sensor seemed ok -. . The sensor was not stable on my network -it dropped off completely 5 times in one week! ? ! the sensor is 4 feet away from a zwave plus ac powered device ! ? ! which should help ! it did not this "sensor" refused to be reliable on the network. Very disappointing in this product. The functions and "all-in one" seemed like a good idea- but they are poorly done. Zooz /and smarthome -can have this gem back! ? ! . . Good luck peps!

R. Shirley, Essex says

Motion sensing is marginal, even on highest sensitivity. Hard coded time out of 3 minutes. Eats batteries. Does not necessarily report based on thresholds for multisensor values, seems to report based on threshold and a certain amount of time. Overall, definitely not the best value nor the most functional multisensor.

E. Kelly, Newfoundland and Labrador

Still on the fince with this one. Factory settings and battery dead in 2 months. The samsung version is still 100% after 6 months in the same location. I got it to use with smartthings for the light sensor and it doesn't even work that well. Different level reads are not consistent. Basically good for is it night or day. I am using the custom device type listed by manufacturer.

C. Valencia, Massachusetts says

If you have smartthings and don't know what the ide is or haven't loaded custom device controllers, you probably don't want to get this sensor, as it doesn't work out of the box absent loading a custom device controller. If you are familiar with custom controllers, there is a good one out there for this sensor. . The battery life could be better. That said, it's not as bad as others have reported if you adjust your settings in the custom controller. You can choose how much of a change in brightness, temperature, or humidity needs to take place for the device to "report" the change. Every time the device reports a change, the battery will take a small hit. So if you're like me and don't need to see every time there's a 0. 1 degree (fahrenheit) change in temperature, or a 1% change in room brightness, you can set the sensor to only report, say, one degree changes in temperature, or a 10% change in room brightness. The larger the values you choose, the less the device reports changes, and the longer your battery lasts. . The brightness, although labeled "lux" in the custom device controller, isn't measured in lux values, but rather percentages brightness. It is a confusing measure, with seemingly dark rooms measuring 40% and bright rooms never approaching even 90%. I don't know how the lux value works, but to someone like me who thinks that 50% should represent a half-lit room (in a relative sense), the brightness values this device provides are not intuitive at all. . What makes this device worth recommending for me is that you will be hard-pressed to find another multi-sensor at this price that works as well as this one does.

Z. Florence, Yukon Territory

Works with smartthings (although i had to use a third party device handler, search google for rboy), installed in 5 minutes. Working flawlessly. Use only alkaline batteries, as if you try to use it with rechargeable ones, you'll get an annoying notification of low battery (1%) even though the battery is charged. Apparently because the rechargeable batteries does not deliver 1. 5v but just 1. 2v. In my opinion this is a significant design flaw, considering that a regular set of batteries lasts about 2 months.

W. Sarah, Saarland says

I purchased this multisensor as an addition to my home automation system because i wanted to control my kitchen lights based upon the current light level. I'm using homeassistant with an aeotec z-stick gen5 (for the z-wave devices) and the zooz paired just fine. Homeassistant sees the various sensors although i ran into a little bit of an issue with motion detection. In homeassistant, motion triggers the 'burglar' sensor from 0 to 8 instead of triggering the binary sensor entity from 'off' to 'on' as is the case with my ecolink pir motion sensor. The luminance, humidity, and temperature sensors all work as expected and seem fairly consistent with my other sensors. The reason that i'm giving this 3 stars is due to the sluggishness and inconsistency of the motion detection sensor, as others here have noted. I cranked the sensitivity up but that didn't help. Sometimes, i can enter completely into the kitchen and move around a bit before it triggers the lights while at other times it'll detect me as soon as i enter the dining room (adjacent to our kitchen). My ecolink pir motion sensor is very quick and consistent when placed in the same location, and i have other z-wave devices close by so i doubt that it's due to a weak signal. Overall, it's a nice compact device and seems well-built, it just seems to have a slow, inconsistent motion sensor.



Leave a Reply

You must be logged in to post a comment.


Back to Top

Related Products

Product Image Gallery

Top-zooz-z-wave-sensor-temperature-humidity-28221akso80o-Content